| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: add VLAN id validation before using
Currently, the VLAN id may be used without validation when
receive a VLAN configuration mailbox from VF. The length of
vlan_del_fail_bmap is BITS_TO_LONGS(VLAN_N_VID). It may cause
out-of-bounds memory access once the VLAN id is bigger than
or equal to VLAN_N_VID.
Therefore, VLAN id needs to be checked to ensure it is within
the range of VLAN_N_VID. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (w83791d) Convert macros to functions to avoid TOCTOU
The macro FAN_FROM_REG evaluates its arguments multiple times. When used
in lockless contexts involving shared driver data, this leads to
Time-of-Check to Time-of-Use (TOCTOU) race conditions, potentially
causing divide-by-zero errors.
Convert the macro to a static function. This guarantees that arguments
are evaluated only once (pass-by-value), preventing the race
conditions.
Additionally, in store_fan_div, move the calculation of the minimum
limit inside the update lock. This ensures that the read-modify-write
sequence operates on consistent data.
Adhere to the principle of minimal changes by only converting macros
that evaluate arguments multiple times and are used in lockless
contexts. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slub: reset KASAN tag in defer_free() before accessing freed memory
When CONFIG_SLUB_TINY is enabled, kfree_nolock() calls kasan_slab_free()
before defer_free(). On ARM64 with MTE (Memory Tagging Extension),
kasan_slab_free() poisons the memory and changes the tag from the
original (e.g., 0xf3) to a poison tag (0xfe).
When defer_free() then tries to write to the freed object to build the
deferred free list via llist_add(), the pointer still has the old tag,
causing a tag mismatch and triggering a KASAN use-after-free report:
BUG: KASAN: slab-use-after-free in defer_free+0x3c/0xbc mm/slub.c:6537
Write at addr f3f000000854f020 by task kworker/u8:6/983
Pointer tag: [f3], memory tag: [fe]
Fix this by calling kasan_reset_tag() before accessing the freed memory.
This is safe because defer_free() is part of the allocator itself and is
expected to manipulate freed memory for bookkeeping purposes. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: Handle incorrect num_connectors capability
The UCSI spec states that the num_connectors field is 7 bits, and the
8th bit is reserved and should be set to zero.
Some buggy FW has been known to set this bit, and it can lead to a
system not booting.
Flag that the FW is not behaving correctly, and auto-fix the value
so that the system boots correctly.
Found on Lenovo P1 G8 during Linux enablement program. The FW will
be fixed, but seemed worth addressing in case it hit platforms that
aren't officially Linux supported. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: ensure node page reads complete before f2fs_put_super() finishes
Xfstests generic/335, generic/336 sometimes crash with the following message:
F2FS-fs (dm-0): detect filesystem reference count leak during umount, type: 9, count: 1
------------[ cut here ]------------
kernel BUG at fs/f2fs/super.c:1939!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 609351 Comm: umount Tainted: G W 6.17.0-rc5-xfstests-g9dd1835ecda5 #1 PREEMPT(none)
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:f2fs_put_super+0x3b3/0x3c0
Call Trace:
<TASK>
generic_shutdown_super+0x7e/0x190
kill_block_super+0x1a/0x40
kill_f2fs_super+0x9d/0x190
deactivate_locked_super+0x30/0xb0
cleanup_mnt+0xba/0x150
task_work_run+0x5c/0xa0
exit_to_user_mode_loop+0xb7/0xc0
do_syscall_64+0x1ae/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]---
It appears that sometimes it is possible that f2fs_put_super() is called before
all node page reads are completed.
Adding a call to f2fs_wait_on_all_pages() for F2FS_RD_NODE fixes the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: PM: Fix reverse check in filesystems_freeze_callback()
The freeze_all_ptr check in filesystems_freeze_callback() introduced by
commit a3f8f8662771 ("power: always freeze efivarfs") is reverse which
quite confusingly causes all file systems to be frozen when
filesystem_freeze_enabled is false.
On my systems it causes the WARN_ON_ONCE() in __set_task_frozen() to
trigger, most likely due to an attempt to freeze a file system that is
not ready for that.
Add a logical negation to the check in question to reverse it as
appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: use global inline_xattr_slab instead of per-sb slab cache
As Hong Yun reported in mailing list:
loop7: detected capacity change from 0 to 131072
------------[ cut here ]------------
kmem_cache of name 'f2fs_xattr_entry-7:7' already exists
WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 kmem_cache_sanity_check mm/slab_common.c:109 [inline]
WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 __kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307
CPU: 0 UID: 0 PID: 24426 Comm: syz.7.1370 Not tainted 6.17.0-rc4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:kmem_cache_sanity_check mm/slab_common.c:109 [inline]
RIP: 0010:__kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307
Call Trace:
__kmem_cache_create include/linux/slab.h:353 [inline]
f2fs_kmem_cache_create fs/f2fs/f2fs.h:2943 [inline]
f2fs_init_xattr_caches+0xa5/0xe0 fs/f2fs/xattr.c:843
f2fs_fill_super+0x1645/0x2620 fs/f2fs/super.c:4918
get_tree_bdev_flags+0x1fb/0x260 fs/super.c:1692
vfs_get_tree+0x43/0x140 fs/super.c:1815
do_new_mount+0x201/0x550 fs/namespace.c:3808
do_mount fs/namespace.c:4136 [inline]
__do_sys_mount fs/namespace.c:4347 [inline]
__se_sys_mount+0x298/0x2f0 fs/namespace.c:4324
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x8e/0x3a0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The bug can be reproduced w/ below scripts:
- mount /dev/vdb /mnt1
- mount /dev/vdc /mnt2
- umount /mnt1
- mounnt /dev/vdb /mnt1
The reason is if we created two slab caches, named f2fs_xattr_entry-7:3
and f2fs_xattr_entry-7:7, and they have the same slab size. Actually,
slab system will only create one slab cache core structure which has
slab name of "f2fs_xattr_entry-7:3", and two slab caches share the same
structure and cache address.
So, if we destroy f2fs_xattr_entry-7:3 cache w/ cache address, it will
decrease reference count of slab cache, rather than release slab cache
entirely, since there is one more user has referenced the cache.
Then, if we try to create slab cache w/ name "f2fs_xattr_entry-7:3" again,
slab system will find that there is existed cache which has the same name
and trigger the warning.
Let's changes to use global inline_xattr_slab instead of per-sb slab cache
for fixing. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Fix VM hard lockup after prolonged inactivity with periodic HV timer
When advancing the target expiration for the guest's APIC timer in periodic
mode, set the expiration to "now" if the target expiration is in the past
(similar to what is done in update_target_expiration()). Blindly adding
the period to the previous target expiration can result in KVM generating
a practically unbounded number of hrtimer IRQs due to programming an
expired timer over and over. In extreme scenarios, e.g. if userspace
pauses/suspends a VM for an extended duration, this can even cause hard
lockups in the host.
Currently, the bug only affects Intel CPUs when using the hypervisor timer
(HV timer), a.k.a. the VMX preemption timer. Unlike the software timer,
a.k.a. hrtimer, which KVM keeps running even on exits to userspace, the
HV timer only runs while the guest is active. As a result, if the vCPU
does not run for an extended duration, there will be a huge gap between
the target expiration and the current time the vCPU resumes running.
Because the target expiration is incremented by only one period on each
timer expiration, this leads to a series of timer expirations occurring
rapidly after the vCPU/VM resumes.
More critically, when the vCPU first triggers a periodic HV timer
expiration after resuming, advancing the expiration by only one period
will result in a target expiration in the past. As a result, the delta
may be calculated as a negative value. When the delta is converted into
an absolute value (tscdeadline is an unsigned u64), the resulting value
can overflow what the HV timer is capable of programming. I.e. the large
value will exceed the VMX Preemption Timer's maximum bit width of
cpu_preemption_timer_multi + 32, and thus cause KVM to switch from the
HV timer to the software timer (hrtimers).
After switching to the software timer, periodic timer expiration callbacks
may be executed consecutively within a single clock interrupt handler,
because hrtimers honors KVM's request for an expiration in the past and
immediately re-invokes KVM's callback after reprogramming. And because
the interrupt handler runs with IRQs disabled, restarting KVM's hrtimer
over and over until the target expiration is advanced to "now" can result
in a hard lockup.
E.g. the following hard lockup was triggered in the host when running a
Windows VM (only relevant because it used the APIC timer in periodic mode)
after resuming the VM from a long suspend (in the host).
NMI watchdog: Watchdog detected hard LOCKUP on cpu 45
...
RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm]
...
RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046
RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc
RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500
RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0
R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0
R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8
FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0
PKRU: 55555554
Call Trace:
<IRQ>
apic_timer_fn+0x31/0x50 [kvm]
__hrtimer_run_queues+0x100/0x280
hrtimer_interrupt+0x100/0x210
? ttwu_do_wakeup+0x19/0x160
smp_apic_timer_interrupt+0x6a/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
Moreover, if the suspend duration of the virtual machine is not long enough
to trigger a hard lockup in this scenario, since commit 98c25ead5eda
("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVM
will continue using the software timer until the guest reprograms the APIC
timer in some way. Since the periodic timer does not require frequent APIC
timer register programming, the guest may continue to use the software
timer in
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: adreno: fix deferencing ifpc_reglist when not declared
On plaforms with an a7xx GPU not supporting IFPC, the ifpc_reglist
if still deferenced in a7xx_patch_pwrup_reglist() which causes
a kernel crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
pc : a6xx_hw_init+0x155c/0x1e4c [msm]
lr : a6xx_hw_init+0x9a8/0x1e4c [msm]
...
Call trace:
a6xx_hw_init+0x155c/0x1e4c [msm] (P)
msm_gpu_hw_init+0x58/0x88 [msm]
adreno_load_gpu+0x94/0x1fc [msm]
msm_open+0xe4/0xf4 [msm]
drm_file_alloc+0x1a0/0x2e4 [drm]
drm_client_init+0x7c/0x104 [drm]
drm_fbdev_client_setup+0x94/0xcf0 [drm_client_lib]
drm_client_setup+0xb4/0xd8 [drm_client_lib]
msm_drm_kms_post_init+0x2c/0x3c [msm]
msm_drm_init+0x1a4/0x228 [msm]
msm_drm_bind+0x30/0x3c [msm]
...
Check the validity of ifpc_reglist before deferencing the table
to setup the register values.
Patchwork: https://patchwork.freedesktop.org/patch/688944/ |
| In the Linux kernel, the following vulnerability has been resolved:
scs: fix a wrong parameter in __scs_magic
__scs_magic() needs a 'void *' variable, but a 'struct task_struct *' is
given. 'task_scs(tsk)' is the starting address of the task's shadow call
stack, and '__scs_magic(task_scs(tsk))' is the end address of the task's
shadow call stack. Here should be '__scs_magic(task_scs(tsk))'.
The user-visible effect of this bug is that when CONFIG_DEBUG_STACK_USAGE
is enabled, the shadow call stack usage checking function
(scs_check_usage) would scan an incorrect memory range. This could lead
1. **Inaccurate stack usage reporting**: The function would calculate
wrong usage statistics for the shadow call stack, potentially showing
incorrect value in kmsg.
2. **Potential kernel crash**: If the value of __scs_magic(tsk)is
greater than that of __scs_magic(task_scs(tsk)), the for loop may
access unmapped memory, potentially causing a kernel panic. However,
this scenario is unlikely because task_struct is allocated via the slab
allocator (which typically returns lower addresses), while the shadow
call stack returned by task_scs(tsk) is allocated via vmalloc(which
typically returns higher addresses).
However, since this is purely a debugging feature
(CONFIG_DEBUG_STACK_USAGE), normal production systems should be not
unaffected. The bug only impacts developers and testers who are actively
debugging stack usage with this configuration enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Sign extend kfunc call arguments
The kfunc calls are native calls so they should follow LoongArch calling
conventions. Sign extend its arguments properly to avoid kernel panic.
This is done by adding a new emit_abi_ext() helper. The emit_abi_ext()
helper performs extension in place meaning a value already store in the
target register (Note: this is different from the existing sign_extend()
helper and thus we can't reuse it). |
| CONTPAQi AdminPAQ 14.0.0 contains an unquoted service path vulnerability in the AppKeyLicenseServer service running with LocalSystem privileges. Attackers can exploit the unquoted path to inject malicious code in the service binary path, potentially executing arbitrary code with elevated system privileges during service startup. |
| ImpressCMS 1.4.4 contains a file upload vulnerability with weak extension sanitization that allows attackers to upload potentially malicious files. Attackers can bypass file upload restrictions by using alternative file extensions .php2.php6.php7.phps.pht to execute arbitrary PHP code on the server. |
| WorkOrder CMS 0.1.0 contains a SQL injection vulnerability that allows unauthenticated attackers to bypass login by manipulating username and password parameters. Attackers can inject malicious SQL queries using techniques like OR '1'='1' and stacked queries to access database information or execute administrative commands. |
| VIAVIWEB Wallpaper Admin 1.0 contains an SQL injection vulnerability that allows authenticated attackers to manipulate database queries by injecting SQL code through the img_id parameter. Attackers can send GET requests to edit_gallery_image.php with malicious img_id values to extract database information. |
| EaseUS Data Recovery 15.1.0.0 contains an unquoted service path vulnerability in the EaseUS UPDATE SERVICE executable. Attackers can exploit the unquoted path to inject and execute malicious code with elevated LocalSystem privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: seqiv - Do not use req->iv after crypto_aead_encrypt
As soon as crypto_aead_encrypt is called, the underlying request
may be freed by an asynchronous completion. Thus dereferencing
req->iv after it returns is invalid.
Instead of checking req->iv against info, create a new variable
unaligned_info and use it for that purpose instead. |
| In the Linux kernel, the following vulnerability has been resolved:
media: adv7842: Avoid possible out-of-bounds array accesses in adv7842_cp_log_status()
It's possible for cp_read() and hdmi_read() to return -EIO. Those
values are further used as indexes for accessing arrays.
Fix that by checking return values where it's needed.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| The Flat Shipping Rate by City for WooCommerce plugin for WordPress is vulnerable to time-based SQL Injection via the 'cities' parameter in all versions up to, and including, 1.0.3 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The VSCode extension for Spring CLI are vulnerable to command injection, resulting in command execution on the users machine. |
