| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix warning in cifs_smb3_do_mount()
This fixes the following warning reported by kernel test robot
fs/smb/client/cifsfs.c:982 cifs_smb3_do_mount() warn: possible
memory leak of 'cifs_sb' |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: jfs_dmap: Validate db_l2nbperpage while mounting
In jfs_dmap.c at line 381, BLKTODMAP is used to get a logical block
number inside dbFree(). db_l2nbperpage, which is the log2 number of
blocks per page, is passed as an argument to BLKTODMAP which uses it
for shifting.
Syzbot reported a shift out-of-bounds crash because db_l2nbperpage is
too big. This happens because the large value is set without any
validation in dbMount() at line 181.
Thus, make sure that db_l2nbperpage is correct while mounting.
Max number of blocks per page = Page size / Min block size
=> log2(Max num_block per page) = log2(Page size / Min block size)
= log2(Page size) - log2(Min block size)
=> Max db_l2nbperpage = L2PSIZE - L2MINBLOCKSIZE |
| In the Linux kernel, the following vulnerability has been resolved:
media: az6007: Fix null-ptr-deref in az6007_i2c_xfer()
In az6007_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach az6007_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") |
| In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Don't balance task to its current running CPU
We've run into the case that the balancer tries to balance a migration
disabled task and trigger the warning in set_task_cpu() like below:
------------[ cut here ]------------
WARNING: CPU: 7 PID: 0 at kernel/sched/core.c:3115 set_task_cpu+0x188/0x240
Modules linked in: hclgevf xt_CHECKSUM ipt_REJECT nf_reject_ipv4 <...snip>
CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Tainted: G O 6.1.0-rc4+ #1
Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : set_task_cpu+0x188/0x240
lr : load_balance+0x5d0/0xc60
sp : ffff80000803bc70
x29: ffff80000803bc70 x28: ffff004089e190e8 x27: ffff004089e19040
x26: ffff007effcabc38 x25: 0000000000000000 x24: 0000000000000001
x23: ffff80000803be84 x22: 000000000000000c x21: ffffb093e79e2a78
x20: 000000000000000c x19: ffff004089e19040 x18: 0000000000000000
x17: 0000000000001fad x16: 0000000000000030 x15: 0000000000000000
x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000001 x10: 0000000000000400 x9 : ffffb093e4cee530
x8 : 00000000fffffffe x7 : 0000000000ce168a x6 : 000000000000013e
x5 : 00000000ffffffe1 x4 : 0000000000000001 x3 : 0000000000000b2a
x2 : 0000000000000b2a x1 : ffffb093e6d6c510 x0 : 0000000000000001
Call trace:
set_task_cpu+0x188/0x240
load_balance+0x5d0/0xc60
rebalance_domains+0x26c/0x380
_nohz_idle_balance.isra.0+0x1e0/0x370
run_rebalance_domains+0x6c/0x80
__do_softirq+0x128/0x3d8
____do_softirq+0x18/0x24
call_on_irq_stack+0x2c/0x38
do_softirq_own_stack+0x24/0x3c
__irq_exit_rcu+0xcc/0xf4
irq_exit_rcu+0x18/0x24
el1_interrupt+0x4c/0xe4
el1h_64_irq_handler+0x18/0x2c
el1h_64_irq+0x74/0x78
arch_cpu_idle+0x18/0x4c
default_idle_call+0x58/0x194
do_idle+0x244/0x2b0
cpu_startup_entry+0x30/0x3c
secondary_start_kernel+0x14c/0x190
__secondary_switched+0xb0/0xb4
---[ end trace 0000000000000000 ]---
Further investigation shows that the warning is superfluous, the migration
disabled task is just going to be migrated to its current running CPU.
This is because that on load balance if the dst_cpu is not allowed by the
task, we'll re-select a new_dst_cpu as a candidate. If no task can be
balanced to dst_cpu we'll try to balance the task to the new_dst_cpu
instead. In this case when the migration disabled task is not on CPU it
only allows to run on its current CPU, load balance will select its
current CPU as new_dst_cpu and later triggers the warning above.
The new_dst_cpu is chosen from the env->dst_grpmask. Currently it
contains CPUs in sched_group_span() and if we have overlapped groups it's
possible to run into this case. This patch makes env->dst_grpmask of
group_balance_mask() which exclude any CPUs from the busiest group and
solve the issue. For balancing in a domain with no overlapped groups
the behaviour keeps same as before. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies()
Fix a slab-out-of-bounds read that occurs in kmemdup() called from
brcmf_get_assoc_ies().
The bug could occur when assoc_info->req_len, data from a URB provided
by a USB device, is bigger than the size of buffer which is defined as
WL_EXTRA_BUF_MAX.
Add the size check for req_len/resp_len of assoc_info.
Found by a modified version of syzkaller.
[ 46.592467][ T7] ==================================================================
[ 46.594687][ T7] BUG: KASAN: slab-out-of-bounds in kmemdup+0x3e/0x50
[ 46.596572][ T7] Read of size 3014656 at addr ffff888019442000 by task kworker/0:1/7
[ 46.598575][ T7]
[ 46.599157][ T7] CPU: 0 PID: 7 Comm: kworker/0:1 Tainted: G O 5.14.0+ #145
[ 46.601333][ T7] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 46.604360][ T7] Workqueue: events brcmf_fweh_event_worker
[ 46.605943][ T7] Call Trace:
[ 46.606584][ T7] dump_stack_lvl+0x8e/0xd1
[ 46.607446][ T7] print_address_description.constprop.0.cold+0x93/0x334
[ 46.608610][ T7] ? kmemdup+0x3e/0x50
[ 46.609341][ T7] kasan_report.cold+0x79/0xd5
[ 46.610151][ T7] ? kmemdup+0x3e/0x50
[ 46.610796][ T7] kasan_check_range+0x14e/0x1b0
[ 46.611691][ T7] memcpy+0x20/0x60
[ 46.612323][ T7] kmemdup+0x3e/0x50
[ 46.612987][ T7] brcmf_get_assoc_ies+0x967/0xf60
[ 46.613904][ T7] ? brcmf_notify_vif_event+0x3d0/0x3d0
[ 46.614831][ T7] ? lock_chain_count+0x20/0x20
[ 46.615683][ T7] ? mark_lock.part.0+0xfc/0x2770
[ 46.616552][ T7] ? lock_chain_count+0x20/0x20
[ 46.617409][ T7] ? mark_lock.part.0+0xfc/0x2770
[ 46.618244][ T7] ? lock_chain_count+0x20/0x20
[ 46.619024][ T7] brcmf_bss_connect_done.constprop.0+0x241/0x2e0
[ 46.620019][ T7] ? brcmf_parse_configure_security.isra.0+0x2a0/0x2a0
[ 46.620818][ T7] ? __lock_acquire+0x181f/0x5790
[ 46.621462][ T7] brcmf_notify_connect_status+0x448/0x1950
[ 46.622134][ T7] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 46.622736][ T7] ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0
[ 46.623390][ T7] ? find_held_lock+0x2d/0x110
[ 46.623962][ T7] ? brcmf_fweh_event_worker+0x19f/0xc60
[ 46.624603][ T7] ? mark_held_locks+0x9f/0xe0
[ 46.625145][ T7] ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
[ 46.625871][ T7] ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0
[ 46.626545][ T7] brcmf_fweh_call_event_handler.isra.0+0x90/0x100
[ 46.627338][ T7] brcmf_fweh_event_worker+0x557/0xc60
[ 46.627962][ T7] ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100
[ 46.628736][ T7] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 46.629396][ T7] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 46.629970][ T7] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 46.630649][ T7] process_one_work+0x92b/0x1460
[ 46.631205][ T7] ? pwq_dec_nr_in_flight+0x330/0x330
[ 46.631821][ T7] ? rwlock_bug.part.0+0x90/0x90
[ 46.632347][ T7] worker_thread+0x95/0xe00
[ 46.632832][ T7] ? __kthread_parkme+0x115/0x1e0
[ 46.633393][ T7] ? process_one_work+0x1460/0x1460
[ 46.633957][ T7] kthread+0x3a1/0x480
[ 46.634369][ T7] ? set_kthread_struct+0x120/0x120
[ 46.634933][ T7] ret_from_fork+0x1f/0x30
[ 46.635431][ T7]
[ 46.635687][ T7] Allocated by task 7:
[ 46.636151][ T7] kasan_save_stack+0x1b/0x40
[ 46.636628][ T7] __kasan_kmalloc+0x7c/0x90
[ 46.637108][ T7] kmem_cache_alloc_trace+0x19e/0x330
[ 46.637696][ T7] brcmf_cfg80211_attach+0x4a0/0x4040
[ 46.638275][ T7] brcmf_attach+0x389/0xd40
[ 46.638739][ T7] brcmf_usb_probe+0x12de/0x1690
[ 46.639279][ T7] usb_probe_interface+0x2aa/0x760
[ 46.639820][ T7] really_probe+0x205/0xb70
[ 46.640342][ T7] __driver_probe_device+0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211_hwsim: Fix possible NULL dereference
In a call to mac80211_hwsim_select_tx_link() the sta pointer might
be NULL, thus need to check that it is not NULL before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: uhci: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Avoid undefined behavior: applying zero offset to null pointer
ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e
Before this change we see the following UBSAN stack trace in Fuchsia:
#0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302
#1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f
#1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f
#1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f
#2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d
#3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d
#4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302
#5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369
#6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac
#7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2
#8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052
#9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8
#10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98
#11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac
#12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d
#13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603
Add a simple check that avoids incrementing a pointer by zero, but
otherwise behaves as before. Note that our findings are against ACPICA
20221020, but the same code exists on master. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: Reinit port->pm on port specific driver unbind
When we unbind a serial port hardware specific 8250 driver, the generic
serial8250 driver takes over the port. After that we see an oops about 10
seconds later. This can produce the following at least on some TI SoCs:
Unhandled fault: imprecise external abort (0x1406)
Internal error: : 1406 [#1] SMP ARM
Turns out that we may still have the serial port hardware specific driver
port->pm in use, and serial8250_pm() tries to call it after the port
specific driver is gone:
serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base]
uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base]
uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c
__tty_hangup.part.0 from disassociate_ctty+0x154/0x20c
disassociate_ctty from do_exit+0x744/0xaac
do_exit from do_group_exit+0x40/0x8c
do_group_exit from __wake_up_parent+0x0/0x1c
Let's fix the issue by calling serial8250_set_defaults() in
serial8250_unregister_port(). This will set the port back to using
the serial8250 default functions, and sets the port->pm to point to
serial8250_pm. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: pcn_uart: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: prevent soft lockup while flush writes
Currently, there is no limit for raid1/raid10 plugged bio. While flushing
writes, raid1 has cond_resched() while raid10 doesn't, and too many
writes can cause soft lockup.
Follow up soft lockup can be triggered easily with writeback test for
raid10 with ramdisks:
watchdog: BUG: soft lockup - CPU#10 stuck for 27s! [md0_raid10:1293]
Call Trace:
<TASK>
call_rcu+0x16/0x20
put_object+0x41/0x80
__delete_object+0x50/0x90
delete_object_full+0x2b/0x40
kmemleak_free+0x46/0xa0
slab_free_freelist_hook.constprop.0+0xed/0x1a0
kmem_cache_free+0xfd/0x300
mempool_free_slab+0x1f/0x30
mempool_free+0x3a/0x100
bio_free+0x59/0x80
bio_put+0xcf/0x2c0
free_r10bio+0xbf/0xf0
raid_end_bio_io+0x78/0xb0
one_write_done+0x8a/0xa0
raid10_end_write_request+0x1b4/0x430
bio_endio+0x175/0x320
brd_submit_bio+0x3b9/0x9b7 [brd]
__submit_bio+0x69/0xe0
submit_bio_noacct_nocheck+0x1e6/0x5a0
submit_bio_noacct+0x38c/0x7e0
flush_pending_writes+0xf0/0x240
raid10d+0xac/0x1ed0
Fix the problem by adding cond_resched() to raid10 like what raid1 did.
Note that unlimited plugged bio still need to be optimized, for example,
in the case of lots of dirty pages writeback, this will take lots of
memory and io will spend a long time in plug, hence io latency is bad. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Pointer may be dereferenced
Klocwork tool reported pointer 'rport' returned from call to function
fc_bsg_to_rport() may be NULL and will be dereferenced.
Add a fix to validate rport before dereferencing. |
| In the Linux kernel, the following vulnerability has been resolved:
igb: Fix igb_down hung on surprise removal
In a setup where a Thunderbolt hub connects to Ethernet and a display
through USB Type-C, users may experience a hung task timeout when they
remove the cable between the PC and the Thunderbolt hub.
This is because the igb_down function is called multiple times when
the Thunderbolt hub is unplugged. For example, the igb_io_error_detected
triggers the first call, and the igb_remove triggers the second call.
The second call to igb_down will block at napi_synchronize.
Here's the call trace:
__schedule+0x3b0/0xddb
? __mod_timer+0x164/0x5d3
schedule+0x44/0xa8
schedule_timeout+0xb2/0x2a4
? run_local_timers+0x4e/0x4e
msleep+0x31/0x38
igb_down+0x12c/0x22a [igb 6615058754948bfde0bf01429257eb59f13030d4]
__igb_close+0x6f/0x9c [igb 6615058754948bfde0bf01429257eb59f13030d4]
igb_close+0x23/0x2b [igb 6615058754948bfde0bf01429257eb59f13030d4]
__dev_close_many+0x95/0xec
dev_close_many+0x6e/0x103
unregister_netdevice_many+0x105/0x5b1
unregister_netdevice_queue+0xc2/0x10d
unregister_netdev+0x1c/0x23
igb_remove+0xa7/0x11c [igb 6615058754948bfde0bf01429257eb59f13030d4]
pci_device_remove+0x3f/0x9c
device_release_driver_internal+0xfe/0x1b4
pci_stop_bus_device+0x5b/0x7f
pci_stop_bus_device+0x30/0x7f
pci_stop_bus_device+0x30/0x7f
pci_stop_and_remove_bus_device+0x12/0x19
pciehp_unconfigure_device+0x76/0xe9
pciehp_disable_slot+0x6e/0x131
pciehp_handle_presence_or_link_change+0x7a/0x3f7
pciehp_ist+0xbe/0x194
irq_thread_fn+0x22/0x4d
? irq_thread+0x1fd/0x1fd
irq_thread+0x17b/0x1fd
? irq_forced_thread_fn+0x5f/0x5f
kthread+0x142/0x153
? __irq_get_irqchip_state+0x46/0x46
? kthread_associate_blkcg+0x71/0x71
ret_from_fork+0x1f/0x30
In this case, igb_io_error_detected detaches the network interface
and requests a PCIE slot reset, however, the PCIE reset callback is
not being invoked and thus the Ethernet connection breaks down.
As the PCIE error in this case is a non-fatal one, requesting a
slot reset can be avoided.
This patch fixes the task hung issue and preserves Ethernet
connection by ignoring non-fatal PCIE errors. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dw2102: Fix null-ptr-deref in dw2102_i2c_transfer()
In dw2102_i2c_transfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach dw2102_i2c_transfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 950e252cb469
("[media] dw2102: limit messages to buffer size") |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
In btsdio_probe, the data->work is bound with btsdio_work. It will be
started in btsdio_send_frame.
If the btsdio_remove runs with a unfinished work, there may be a race
condition that hdev is freed but used in btsdio_work. Fix it by
canceling the work before do cleanup in btsdio_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: prevent out-of-bounds array speculation when closing a file descriptor
Google-Bug-Id: 114199369 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: zero i_disksize when initializing the bootloader inode
If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0. However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:
WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319
CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa
RIP: 0010:ext4_file_write_iter+0xbc7/0xd10
Call Trace:
vfs_write+0x3b1/0x5c0
ksys_write+0x77/0x160
__x64_sys_write+0x22/0x30
do_syscall_64+0x39/0x80
Reproducer:
1. create corrupted image and mount it:
mke2fs -t ext4 /tmp/foo.img 200
debugfs -wR "sif <5> size 25700" /tmp/foo.img
mount -t ext4 /tmp/foo.img /mnt
cd /mnt
echo 123 > file
2. Run the reproducer program:
posix_memalign(&buf, 1024, 1024)
fd = open("file", O_RDWR | O_DIRECT);
ioctl(fd, EXT4_IOC_SWAP_BOOT);
write(fd, buf, 1024);
Fix this by setting i_disksize as well as i_size to zero when
initiaizing the boot loader inode. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix WARNING in ext4_update_inline_data
Syzbot found the following issue:
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-aesni"
fscrypt: AES-256-XTS using implementation "xts-aes-aesni"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5071 at mm/page_alloc.c:5525 __alloc_pages+0x30a/0x560 mm/page_alloc.c:5525
Modules linked in:
CPU: 1 PID: 5071 Comm: syz-executor263 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:__alloc_pages+0x30a/0x560 mm/page_alloc.c:5525
RSP: 0018:ffffc90003c2f1c0 EFLAGS: 00010246
RAX: ffffc90003c2f220 RBX: 0000000000000014 RCX: 0000000000000000
RDX: 0000000000000028 RSI: 0000000000000000 RDI: ffffc90003c2f248
RBP: ffffc90003c2f2d8 R08: dffffc0000000000 R09: ffffc90003c2f220
R10: fffff52000785e49 R11: 1ffff92000785e44 R12: 0000000000040d40
R13: 1ffff92000785e40 R14: dffffc0000000000 R15: 1ffff92000785e3c
FS: 0000555556c0d300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f95d5e04138 CR3: 00000000793aa000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__alloc_pages_node include/linux/gfp.h:237 [inline]
alloc_pages_node include/linux/gfp.h:260 [inline]
__kmalloc_large_node+0x95/0x1e0 mm/slab_common.c:1113
__do_kmalloc_node mm/slab_common.c:956 [inline]
__kmalloc+0xfe/0x190 mm/slab_common.c:981
kmalloc include/linux/slab.h:584 [inline]
kzalloc include/linux/slab.h:720 [inline]
ext4_update_inline_data+0x236/0x6b0 fs/ext4/inline.c:346
ext4_update_inline_dir fs/ext4/inline.c:1115 [inline]
ext4_try_add_inline_entry+0x328/0x990 fs/ext4/inline.c:1307
ext4_add_entry+0x5a4/0xeb0 fs/ext4/namei.c:2385
ext4_add_nondir+0x96/0x260 fs/ext4/namei.c:2772
ext4_create+0x36c/0x560 fs/ext4/namei.c:2817
lookup_open fs/namei.c:3413 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x12ac/0x2dd0 fs/namei.c:3711
do_filp_open+0x264/0x4f0 fs/namei.c:3741
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_openat fs/open.c:1342 [inline]
__se_sys_openat fs/open.c:1337 [inline]
__x64_sys_openat+0x243/0x290 fs/open.c:1337
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Above issue happens as follows:
ext4_iget
ext4_find_inline_data_nolock ->i_inline_off=164 i_inline_size=60
ext4_try_add_inline_entry
__ext4_mark_inode_dirty
ext4_expand_extra_isize_ea ->i_extra_isize=32 s_want_extra_isize=44
ext4_xattr_shift_entries
->after shift i_inline_off is incorrect, actually is change to 176
ext4_try_add_inline_entry
ext4_update_inline_dir
get_max_inline_xattr_value_size
if (EXT4_I(inode)->i_inline_off)
entry = (struct ext4_xattr_entry *)((void *)raw_inode +
EXT4_I(inode)->i_inline_off);
free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size));
->As entry is incorrect, then 'free' may be negative
ext4_update_inline_data
value = kzalloc(len, GFP_NOFS);
-> len is unsigned int, maybe very large, then trigger warning when
'kzalloc()'
To resolve the above issue we need to update 'i_inline_off' after
'ext4_xattr_shift_entries()'. We do not need to set
EXT4_STATE_MAY_INLINE_DATA flag here, since ext4_mark_inode_dirty()
already sets this flag if needed. Setting EXT4_STATE_MAY_INLINE_DATA
when it is needed may trigger a BUG_ON in ext4_writepages(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: rc: gpio-ir-recv: add remove function
In case runtime PM is enabled, do runtime PM clean up to remove
cpu latency qos request, otherwise driver removal may have below
kernel dump:
[ 19.463299] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000048
[ 19.472161] Mem abort info:
[ 19.474985] ESR = 0x0000000096000004
[ 19.478754] EC = 0x25: DABT (current EL), IL = 32 bits
[ 19.484081] SET = 0, FnV = 0
[ 19.487149] EA = 0, S1PTW = 0
[ 19.490361] FSC = 0x04: level 0 translation fault
[ 19.495256] Data abort info:
[ 19.498149] ISV = 0, ISS = 0x00000004
[ 19.501997] CM = 0, WnR = 0
[ 19.504977] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000049f81000
[ 19.511432] [0000000000000048] pgd=0000000000000000,
p4d=0000000000000000
[ 19.518245] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 19.524520] Modules linked in: gpio_ir_recv(+) rc_core [last
unloaded: rc_core]
[ 19.531845] CPU: 0 PID: 445 Comm: insmod Not tainted
6.2.0-rc1-00028-g2c397a46d47c #72
[ 19.531854] Hardware name: FSL i.MX8MM EVK board (DT)
[ 19.531859] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[ 19.551777] pc : cpu_latency_qos_remove_request+0x20/0x110
[ 19.557277] lr : gpio_ir_recv_runtime_suspend+0x18/0x30
[gpio_ir_recv]
[ 19.557294] sp : ffff800008ce3740
[ 19.557297] x29: ffff800008ce3740 x28: 0000000000000000 x27:
ffff800008ce3d50
[ 19.574270] x26: ffffc7e3e9cea100 x25: 00000000000f4240 x24:
ffffc7e3f9ef0e30
[ 19.574284] x23: 0000000000000000 x22: ffff0061803820f4 x21:
0000000000000008
[ 19.574296] x20: ffffc7e3fa75df30 x19: 0000000000000020 x18:
ffffffffffffffff
[ 19.588570] x17: 0000000000000000 x16: ffffc7e3f9efab70 x15:
ffffffffffffffff
[ 19.595712] x14: ffff800008ce37b8 x13: ffff800008ce37aa x12:
0000000000000001
[ 19.602853] x11: 0000000000000001 x10: ffffcbe3ec0dff87 x9 :
0000000000000008
[ 19.609991] x8 : 0101010101010101 x7 : 0000000000000000 x6 :
000000000f0bfe9f
[ 19.624261] x5 : 00ffffffffffffff x4 : 0025ab8e00000000 x3 :
ffff006180382010
[ 19.631405] x2 : ffffc7e3e9ce8030 x1 : ffffc7e3fc3eb810 x0 :
0000000000000020
[ 19.638548] Call trace:
[ 19.640995] cpu_latency_qos_remove_request+0x20/0x110
[ 19.646142] gpio_ir_recv_runtime_suspend+0x18/0x30 [gpio_ir_recv]
[ 19.652339] pm_generic_runtime_suspend+0x2c/0x44
[ 19.657055] __rpm_callback+0x48/0x1dc
[ 19.660807] rpm_callback+0x6c/0x80
[ 19.664301] rpm_suspend+0x10c/0x640
[ 19.667880] rpm_idle+0x250/0x2d0
[ 19.671198] update_autosuspend+0x38/0xe0
[ 19.675213] pm_runtime_set_autosuspend_delay+0x40/0x60
[ 19.680442] gpio_ir_recv_probe+0x1b4/0x21c [gpio_ir_recv]
[ 19.685941] platform_probe+0x68/0xc0
[ 19.689610] really_probe+0xc0/0x3dc
[ 19.693189] __driver_probe_device+0x7c/0x190
[ 19.697550] driver_probe_device+0x3c/0x110
[ 19.701739] __driver_attach+0xf4/0x200
[ 19.705578] bus_for_each_dev+0x70/0xd0
[ 19.709417] driver_attach+0x24/0x30
[ 19.712998] bus_add_driver+0x17c/0x240
[ 19.716834] driver_register+0x78/0x130
[ 19.720676] __platform_driver_register+0x28/0x34
[ 19.725386] gpio_ir_recv_driver_init+0x20/0x1000 [gpio_ir_recv]
[ 19.731404] do_one_initcall+0x44/0x2ac
[ 19.735243] do_init_module+0x48/0x1d0
[ 19.739003] load_module+0x19fc/0x2034
[ 19.742759] __do_sys_finit_module+0xac/0x12c
[ 19.747124] __arm64_sys_finit_module+0x20/0x30
[ 19.751664] invoke_syscall+0x48/0x114
[ 19.755420] el0_svc_common.constprop.0+0xcc/0xec
[ 19.760132] do_el0_svc+0x38/0xb0
[ 19.763456] el0_svc+0x2c/0x84
[ 19.766516] el0t_64_sync_handler+0xf4/0x120
[ 19.770789] el0t_64_sync+0x190/0x194
[ 19.774460] Code: 910003fd a90153f3 aa0003f3 91204021 (f9401400)
[ 19.780556] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/iommu: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once. |
