| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix use-after-free and leak in lan966x_fdma_reload()
When lan966x_fdma_reload() fails to allocate new RX buffers, the restore
path restarts DMA using old descriptors whose pages were already freed
via lan966x_fdma_rx_free_pages(). Since page_pool_put_full_page() can
release pages back to the buddy allocator, the hardware may DMA into
memory now owned by other kernel subsystems.
Additionally, on the restore path, the newly created page pool (if
allocation partially succeeded) is overwritten without being destroyed,
leaking it.
Fix both issues by deferring the release of old pages until after the
new allocation succeeds. Save the old page array before the allocation
so old pages can be freed on the success path. On the failure path, the
old descriptors, pages and page pool are all still valid, making the
restore safe. Also ensure the restore path re-enables NAPI and wakes
the netdev, matching the success path. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix key parsing memleak
In rxrpc_preparse_xdr_yfs_rxgk(), the memory attached to token->rxgk can be
leaked in a few error paths after it's allocated.
Fix this by freeing it in the "reject_token:" case. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix call removal to use RCU safe deletion
Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu()
rather than list_del_init() to prevent stuffing up reading
/proc/net/rxrpc/calls from potentially getting into an infinite loop.
This, however, means that list_empty() no longer works on an entry that's
been deleted from the list, making it harder to detect prior deletion. Fix
this by:
Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that
are unexpectedly still on the list. Limiting the number of steps means
there's no need to call cond_resched() or to remove calls from the list
here, thereby eliminating the need for rxrpc_put_call() to check for that.
rxrpc_put_call() can then be fixed to unconditionally delete the call from
the list as it is the only place that the deletion occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix RxGK token loading to check bounds
rxrpc_preparse_xdr_yfs_rxgk() reads the raw key length and ticket length
from the XDR token as u32 values and passes each through round_up(x, 4)
before using the rounded value for validation and allocation. When the raw
length is >= 0xfffffffd, round_up() wraps to 0, so the bounds check and
kzalloc both use 0 while the subsequent memcpy still copies the original
~4 GiB value, producing a heap buffer overflow reachable from an
unprivileged add_key() call.
Fix this by:
(1) Rejecting raw key lengths above AFSTOKEN_GK_KEY_MAX and raw ticket
lengths above AFSTOKEN_GK_TOKEN_MAX before rounding, consistent with
the caps that the RxKAD path already enforces via AFSTOKEN_RK_TIX_MAX.
(2) Sizing the flexible-array allocation from the validated raw key
length via struct_size_t() instead of the rounded value.
(3) Caching the raw lengths so that the later field assignments and
memcpy calls do not re-read from the token, eliminating a class of
TOCTOU re-parse.
The control path (valid token with lengths within bounds) is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix use of wrong skb when comparing queued RESP challenge serial
In rxrpc_post_response(), the code should be comparing the challenge serial
number from the cached response before deciding to switch to a newer
response, but looks at the newer packet private data instead, rendering the
comparison always false.
Fix this by switching to look at the older packet.
Fix further[1] to substitute the new packet in place of the old one if
newer and also to release whichever we don't use. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix key reference count leak from call->key
When creating a client call in rxrpc_alloc_client_call(), the code obtains
a reference to the key. This is never cleaned up and gets leaked when the
call is destroyed.
Fix this by freeing call->key in rxrpc_destroy_call().
Before the patch, it shows the key reference counter elevated:
$ cat /proc/keys | grep afs@54321
1bffe9cd I--Q--i 8053480 4169w 3b010000 1000 1000 rxrpc afs@54321: ka
$
After the patch, the invalidated key is removed when the code exits:
$ cat /proc/keys | grep afs@54321
$ |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Only put the call ref if one was acquired
rxrpc_input_packet_on_conn() can process a to-client packet after the
current client call on the channel has already been torn down. In that
case chan->call is NULL, rxrpc_try_get_call() returns NULL and there is
no reference to drop.
The client-side implicit-end error path does not account for that and
unconditionally calls rxrpc_put_call(). This turns a protocol error
path into a kernel crash instead of rejecting the packet.
Only drop the call reference if one was actually acquired. Keep the
existing protocol error handling unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: reject undecryptable rxkad response tickets
rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then
parses the buffer as plaintext without checking whether
crypto_skcipher_decrypt() succeeded.
A malformed RESPONSE can therefore use a non-block-aligned ticket
length, make the decrypt operation fail, and still drive the ticket
parser with attacker-controlled bytes.
Check the decrypt result and abort the connection with RXKADBADTICKET
when ticket decryption fails. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix RESPONSE authenticator parser OOB read
rxgk_verify_authenticator() copies auth_len bytes into a temporary
buffer and then passes p + auth_len as the parser limit to
rxgk_do_verify_authenticator(). Since p is a __be32 *, that inflates the
parser end pointer by a factor of four and lets malformed RESPONSE
authenticators read past the kmalloc() buffer.
Decoded from the original latest-net reproduction logs with
scripts/decode_stacktrace.sh:
BUG: KASAN: slab-out-of-bounds in rxgk_verify_response()
Call Trace:
dump_stack_lvl() [lib/dump_stack.c:123]
print_report() [mm/kasan/report.c:379 mm/kasan/report.c:482]
kasan_report() [mm/kasan/report.c:597]
rxgk_verify_response()
[net/rxrpc/rxgk.c:1103 net/rxrpc/rxgk.c:1167
net/rxrpc/rxgk.c:1274]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
process_one_work() [kernel/workqueue.c:3281]
worker_thread()
[kernel/workqueue.c:3353 kernel/workqueue.c:3440]
kthread() [kernel/kthread.c:436]
ret_from_fork() [arch/x86/kernel/process.c:164]
Allocated by task 54:
rxgk_verify_response()
[include/linux/slab.h:954 net/rxrpc/rxgk.c:1155
net/rxrpc/rxgk.c:1274]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
Convert the byte count to __be32 units before constructing the parser
limit. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix oversized RESPONSE authenticator length check
rxgk_verify_response() decodes auth_len from the packet and is supposed
to verify that it fits in the remaining bytes. The existing check is
inverted, so oversized RESPONSE authenticators are accepted and passed
to rxgk_decrypt_skb(), which can later reach skb_to_sgvec() with an
impossible length and hit BUG_ON(len).
Decoded from the original latest-net reproduction logs with
scripts/decode_stacktrace.sh:
RIP: __skb_to_sgvec()
[net/core/skbuff.c:5285 (discriminator 1)]
Call Trace:
skb_to_sgvec() [net/core/skbuff.c:5305]
rxgk_decrypt_skb() [net/rxrpc/rxgk_common.h:81]
rxgk_verify_response() [net/rxrpc/rxgk.c:1268]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
process_one_work() [kernel/workqueue.c:3281]
worker_thread()
[kernel/workqueue.c:3353 kernel/workqueue.c:3440]
kthread() [kernel/kthread.c:436]
ret_from_fork() [arch/x86/kernel/process.c:164]
Reject authenticator lengths that exceed the remaining packet payload. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix integer overflow in rxgk_verify_response()
In rxgk_verify_response(), there's a potential integer overflow due to
rounding up token_len before checking it, thereby allowing the length check to
be bypassed.
Fix this by checking the unrounded value against len too (len is limited as
the response must fit in a single UDP packet). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix leak of rxgk context in rxgk_verify_response()
Fix rxgk_verify_response() to clean up the rxgk context it creates. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
Fix rxgk_do_verify_authenticator() to check the buffer size before checking
the nonce. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: proc: size address buffers for %pISpc output
The AF_RXRPC procfs helpers format local and remote socket addresses into
fixed 50-byte stack buffers with "%pISpc".
That is too small for the longest current-tree IPv6-with-port form the
formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a
dotted-quad tail not only for v4mapped addresses, but also for ISATAP
addresses via ipv6_addr_is_isatap().
As a result, a case such as
[ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535
is possible with the current formatter. That is 50 visible characters, so
51 bytes including the trailing NUL, which does not fit in the existing
char[50] buffers used by net/rxrpc/proc.c.
Size the buffers from the formatter's maximum textual form and switch the
call sites to scnprintf().
Changes since v1:
- correct the changelog to cite the actual maximum current-tree case
explicitly
- frame the proof around the ISATAP formatting path instead of the earlier
mapped-v4 example |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: add missing return after LLCP_CLOSED checks
In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket
state is LLCP_CLOSED, the code correctly calls release_sock() and
nfc_llcp_sock_put() but fails to return. Execution falls through to
the remainder of the function, which calls release_sock() and
nfc_llcp_sock_put() again. This results in a double release_sock()
and a refcount underflow via double nfc_llcp_sock_put(), leading to
a use-after-free.
Add the missing return statements after the LLCP_CLOSED branches
in both functions to prevent the fall-through. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: initialize le_tmp64 in rtw_BIP_verify()
Initialize le_tmp64 to zero in rtw_BIP_verify() to prevent using
uninitialized data.
Smatch warns that only 6 bytes are copied to this 8-byte (u64)
variable, leaving the last two bytes uninitialized:
drivers/staging/rtl8723bs/core/rtw_security.c:1308 rtw_BIP_verify()
warn: not copying enough bytes for '&le_tmp64' (8 vs 6 bytes)
Initializing the variable at the start of the function fixes this
warning and ensures predictable behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: fix NULL pointer dereference in alps_raw_event()
Commit ecfa6f34492c ("HID: Add HID_CLAIMED_INPUT guards in raw_event
callbacks missing them") attempted to fix up the HID drivers that had
missed the previous fix that was done in 2ff5baa9b527 ("HID: appleir:
Fix potential NULL dereference at raw event handle"), but the alps
driver was missed.
Fix this up by properly checking in the hid-alps driver that it had been
claimed correctly before attempting to process the raw event. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
A malicious USB device claiming to be a CDC Phonet modem can overflow
the skb_shared_info->frags[] array by sending an unbounded sequence of
full-page bulk transfers.
Drop the skb and increment the length error when the frag limit is
reached. This matches the same fix that commit f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") did for the
t7xx driver. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: digital: Bounds check NFC-A cascade depth in SDD response handler
The NFC-A anti-collision cascade in digital_in_recv_sdd_res() appends 3
or 4 bytes to target->nfcid1 on each round, but the number of cascade
rounds is controlled entirely by the peer device. The peer sets the
cascade tag in the SDD_RES (deciding 3 vs 4 bytes) and the
cascade-incomplete bit in the SEL_RES (deciding whether another round
follows).
ISO 14443-3 limits NFC-A to three cascade levels and target->nfcid1 is
sized accordingly (NFC_NFCID1_MAXSIZE = 10), but nothing in the driver
actually enforces this. This means a malicious peer can keep the
cascade running, writing past the heap-allocated nfc_target with each
round.
Fix this by rejecting the response when the accumulated UID would exceed
the buffer.
Commit e329e71013c9 ("NFC: nci: Bounds check struct nfc_target arrays")
fixed similar missing checks against the same field on the NCI path. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: us144mkii: fix NULL deref on missing interface 0
A malicious USB device with the TASCAM US-144MKII device id can have a
configuration containing bInterfaceNumber=1 but no interface 0. USB
configuration descriptors are not required to assign interface numbers
sequentially, so usb_ifnum_to_if(dev, 0) returns will NULL, which will
then be dereferenced directly.
Fix this up by checking the return value properly. |
