| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: fix u-a-f in luo_file_unpreserve_files() and luo_file_finish()
In luo_file_unpreserve_files() and luo_file_finish(), reorder
module_put() and xa_erase() to ensure the file handler module remains
pinned while its operations are being accessed.
Specifically, luo_get_id() dereferences fh->ops->get_id, so the module
reference must be held until after xa_erase() (which calls luo_get_id)
completes.
For luo_file_finish(), this requires moving the module_put() call out of
the luo_file_finish_one() helper and into the main loop of
luo_file_finish() itself. |
| In the Linux kernel, the following vulnerability has been resolved:
dax/kmem: account for partial discontiguous resource upon removal
When dev_dax_kmem_probe() partially succeeds (at least one range is
mapped) but a subsequent range fails request_mem_region() or
add_memory_driver_managed(), the probe silently continues, ultimately
returning success, but with the corresponding range resource NULL'ed out.
dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if
the underlying resource exists. When remove_memory() is called later, it
returns 0 because the memory was never added which causes
dev_dax_kmem_remove() to incorrectly assume the (nonexistent) resource can
be removed and attempts cleanup on a NULL pointer.
Fix this by skipping these ranges altogether, noting that these cases are
considered success, such that the cleanup is still reached when all
actually-added ranges are successfully removed. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Allow entries in BO caches to be freed
When a buffer object is pinned via host1x_bo_pin() with a cache, the
resulting mapping is kept in the cache so it can be reused on subsequent
pins. Each mapping held a reference to the underlying host1x_bo (taken
in tegra_bo_pin / gather_bo_pin), so as long as a mapping was cached,
the bo itself could not be freed.
However, the only way to remove the cached mapping was through the free
path of the buffer object. This meant that if a bo got cached, it could
never get freed again.
Resolve the circularity by holding a weak reference to the bo from the
cache side. This is done by having the .pin callbacks not bump the bo's
refcount -- instead the common Host1x bo code does so, except for the
cache reference.
Also move the remove-cache-mapping-on-free code into a common function
inside Host1x code. This is only called from the TegraDRM GEM buffers
since those are the only ones that can be cached at the moment. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_bpf: prevent unbounded recursion in offload rollback
Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd().
Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the
bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace
calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then
swaps prog/oldprog and recursively calls itself to roll back. But
bpf_tc_accept=0 makes the rollback fail too, which triggers yet another
rollback frame with the same arguments, and so on until the stack is
exhausted.
bpf_tc_accept is just a convenient knob for the reproducer. Any driver
whose tc_setup_cb_replace() fails twice in a row can hit the same loop,
so this is not a netdevsim-only issue.
Two ways to fix it:
1) Have the rollback call tc_setup_cb_add() on oldprog instead of
re-entering cls_bpf_offload_cmd().
2) Mark the rollback frame with a flag and skip a second-level
rollback from inside it.
Go with (2). It is the smaller change and keeps the original behaviour:
the rollback still goes through tc_setup_cb_replace(), so the driver
gets one real chance to restore its state. If that attempt also fails,
we just return the original error instead of recursing.
[1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Bound synthetic-field strings with seq_buf
The synthetic field helpers build a prefixed synthetic variable name and
a generated hist command in fixed MAX_FILTER_STR_VAL buffers. The
current code appends those strings with raw strcat(), so long key lists,
field names, or saved filters can run past the end of the staging
buffers.
Build both strings with seq_buf and propagate -E2BIG if either the
synthetic variable name or the generated command exceeds
MAX_FILTER_STR_VAL. This keeps the existing tracing-side limit while
using the helper intended for bounded command construction.
[ sdr: Moved struct seq_buf *s for upside-down x-mas tree formatting ] |
| In the Linux kernel, the following vulnerability has been resolved:
udmabuf: Set the DMA mask for the udmabuf device (v2)
If the DMA mask is not set explicitly, the following warning occurs
when the userspace tries to access the dma-buf via the CPU as
reported by syzbot here:
WARNING: CPU: 1 PID: 3595 at kernel/dma/mapping.c:188
__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188
Modules linked in:
CPU: 0 PID: 3595 Comm: syz-executor249 Not tainted
5.17.0-rc2-syzkaller-00316-g0457e5153e0e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188
Code: 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 75 71 4c 8b 3d c0
83 b5 0d e9 db fe ff ff e8 b6 0f 13 00 0f 0b e8 af 0f 13 00 <0f> 0b 45
31 e4 e9 54 ff ff ff e8 a0 0f 13 00 49 8d 7f 50 48 b8 00
RSP: 0018:ffffc90002a07d68 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88807e25e2c0 RSI: ffffffff81649e91 RDI: ffff88801b848408
RBP: ffff88801b848000 R08: 0000000000000002 R09: ffff88801d86c74f
R10: ffffffff81649d72 R11: 0000000000000001 R12: 0000000000000002
R13: ffff88801d86c680 R14: 0000000000000001 R15: 0000000000000000
FS: 0000555556e30300(0000) GS:ffff8880b9d00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200000cc CR3: 000000001d74a000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
dma_map_sgtable+0x70/0xf0 kernel/dma/mapping.c:264
get_sg_table.isra.0+0xe0/0x160 drivers/dma-buf/udmabuf.c:72
begin_cpu_udmabuf+0x130/0x1d0 drivers/dma-buf/udmabuf.c:126
dma_buf_begin_cpu_access+0xfd/0x1d0 drivers/dma-buf/dma-buf.c:1164
dma_buf_ioctl+0x259/0x2b0 drivers/dma-buf/dma-buf.c:363
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f62fcf530f9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe3edab9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f62fcf530f9
RDX: 0000000020000200 RSI: 0000000040086200 RDI: 0000000000000006
RBP: 00007f62fcf170e0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f62fcf17170
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
v2: Dont't forget to deregister if DMA mask setup fails. |
| In the Linux kernel, the following vulnerability has been resolved:
media: venus: hfi: avoid null dereference in deinit
If venus_probe fails at pm_runtime_put_sync the error handling first
calls hfi_destroy and afterwards hfi_core_deinit. As hfi_destroy sets
core->ops to NULL, hfi_core_deinit cannot call the core_deinit function
anymore.
Avoid this null pointer derefence by skipping the call when necessary. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix deadlock waiting for ticket during data relocation
When performing data relocation on a zoned filesystem, BTRFS can deadlock
in handle_reserve_tickets(). The relocation process is waiting on a space
reservation ticket that can never be fulfilled, because the relocation
itself is the operation responsible for freeing up that space.
Fix this by introducing a new flush state,
BTRFS_RESERVE_FLUSH_ZONED_RELOCATION, specifically for data chunk
allocation during zoned relocation. Like
BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE, this state uses
priority_reclaim_data_space() instead of the normal flushing path, which
avoids re-entering the relocation code and breaking the deadlock cycle.
In btrfs_alloc_data_chunk_ondemand(), select this new flush state when the
inode belongs to a data relocation root on a zoned filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix resource leak in probe error path
When pcim_iomap_region() or devm_kmemdup() fail, the code returns
directly without cleaning up previously allocated resources:
- mt76_device allocated by mt76_alloc_device()
- pci irq vectors allocated by pci_alloc_irq_vectors()
Fix this by jumping to the existing error cleanup path instead of
returning directly. |
| In the Linux kernel, the following vulnerability has been resolved:
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
find_vm_area() can return NULL if the given address is not a valid vmalloc
area. Check the return value before dereferencing it to avoid a kernel
crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Clear variable event pointer on read
snd_seq_read() copies a queued variable-length event header to userspace
before expanding the payload. Queued variable-length events use
SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first
extension cell.
The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the
copy, but it leaves data.ext.ptr untouched. A userspace sequencer client
can therefore write a direct variable event to itself and read back the
extension-cell kernel address from the returned header.
Clear the temporary header pointer before copy_to_user(). The original
queued event remains unchanged and is still passed to
snd_seq_expand_var_event(), so payload expansion keeps using the
internal chain. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: rebase copied fsdlm LVB pointers in locking_state
The locking_state debugfs iterator snapshots struct ocfs2_lock_res by
value under ocfs2_dlm_tracking_lock and later formats that copy in
ocfs2_dlm_seq_show(). That is fine for the inline fields, but the
userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once
the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still
points into the original lockres owner, so teardown can free that
container before the debugfs dump walks the raw LVB bytes.
Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw
LVB. The seq snapshot already carries the inline LVB storage reserved in
struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes
without borrowing the original lockres lifetime.
The buggy scenario involves two paths, with each column showing the order
within that path:
locking_state reader: lockres teardown:
1. ocfs2_dlm_seq_start()/next() 1. file release or another owner
copies struct ocfs2_lock_res teardown reaches
2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free()
the copied row 2. the lockres is removed from the
3. ocfs2_dlm_lvb() follows the tracking list
copied sb_lvbptr 3. the owner frees the original
lockres container
Validation reproduced this kernel report:
KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430
RIP: 0033:0x7f8ec4b1e29d
The buggy address belongs to the object at ffff88810a1e0800 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 368 bytes inside of freed 1024-byte region
[ffff88810a1e0800, ffff88810a1e0c00)
Read of size 1
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
seq_read_iter+0x29d/0x790
seq_read+0x20a/0x280
find_held_lock+0x2b/0x80
rcu_read_unlock+0x18/0x70
full_proxy_read+0x9e/0xd0
vfs_read+0x12c/0x590
ksys_read+0xd2/0x170
do_user_addr_fault+0x65a/0x890
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
ocfs2_file_open+0x13e/0x300
do_dentry_open+0x233/0x7f0
vfs_open+0x5a/0x1b0
path_openat+0x66d/0x1540
do_file_open+0x186/0x2b0
do_sys_openat2+0xce/0x150
__x64_sys_openat+0xd0/0x140
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
ocfs2_file_release+0x138/0x260
__fput+0x1df/0x4b0
fput_close_sync+0xd2/0x170
__x64_sys_close+0x55/0x90
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
of: reserved_mem: avoid post-init UAF when alloc_reserved_mem_array() fails
The global pointer 'reserved_mem' continues to reference the
reserved_mem_array which lives in __initdata if
alloc_reserved_mem_array() fails. of_reserved_mem_lookup() is
exported for post-init use, that would dereference freed memory
and trigger a use-after-free.
So reset reserved_mem_count to 0 when alloc_reserved_mem_array()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject exclusive maps for bpf_map_elem iterators
Exclusive maps (aka excl_prog_hash) are meant to be reachable only
from the single program whose hash matches. This is enforced by
check_map_prog_compatibility() when the map is referenced from a
program such as signed BPF loaders.
A bpf_map_elem iterator, however, binds its target map at attach
time in bpf_iter_attach_map() instead of referencing it from the
program, so the exclusivity check is never reached. On top of that,
the iterator exposes the map value as a writable buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: fix ignored return value of generic_write_sync()
Fix ext2_dio_write_iter() to propagate the error returned by
generic_write_sync() instead of silently discarding it, which could
cause write(2) to return success to userspace on O_SYNC/O_DSYNC files
even when the sync failed.
The correct pattern, already used in ext2_dax_write_iter() in the same
file and in ext4, xfs, f2fs among others, is:
if (ret > 0)
ret = generic_write_sync(iocb, ret);
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[JK: Reflect also filemap_write_and_wait() return value] |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: core: fix supplied_from allocations
If dts property power-supplies has multiple values, then accessing to
psy->supplied_from[i-1] in __power_supply_populate_supplied_from will
overrun supplied_from array. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: xilinx: use FIFO occupancy register to determine buffer size
The method the driver uses to determine the size of the FIFO has a
problem. What it currently does is this:
It stops the SPI hardware and writes to the TX FIFO register until TX
FIFO FULL asserts in the status register. But the hardware does not only
have the FIFO, it also has a shift register which can hold a byte. This
can be seen, when writing a byte to the FIFO (while the SPI hardware is
stopped,) the TX FIFO EMPTY is still empty. So, if we have a FIFO size
of 16 for example, the current method returns a 17.
This is a problem, at least when using the driver in irq mode. The same
size determined for the TX FIFO is also assumed for the RX FIFO. When a
SPI transaction wants to write the amount of the FIFO size or more
bytes, the following happens, for example with 16 bytes FIFO size:
The driver stops the SPI hardware and writes 17 bytes to the TX FIFO and
starts the SPI hardware and goes sleep.
The hardware then shifts out 17 bytes (FIFO + shift register) and
simultaneously reads bytes into the RX FIFO, but it only has 16 places,
so it looses one byte. Then TX FIFO empty asserts, wakes the driver
again, which has a fast path and reads 16 bytes from the RX FIFO, but
before reading the last 17th byte (which is lost) it does this:
sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
if (!(sr & XSPI_SR_RX_EMPTY_MASK)) {
xilinx_spi_rx(xspi);
rx_words--;
}
It reads the status register and checks if the RX FIFO is not empty.
But it is empty in our case. So this check spins in a while loop
forever locking the driver.
This patch fixes the logic to determine the FIFO size. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: topology: Check PCM and DAI name strings before use
Topology objects store several PCM and DAI names in fixed-size UAPI
arrays. Other topology parser paths validate these fields with bounded
strnlen() checks before using them as C strings, but the PCM and DAI
paths still pass some fixed-size arrays directly to strlen(),
devm_kstrdup(), DAI lookup, and diagnostic prints.
A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream
capability name can therefore make the parser read past the end of the
fixed-size field.
Reject unterminated PCM and DAI name fields before consuming them as C
strings. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: mma8452: handle I2C read error(s) in mma8452_read()
Currently, If i2c_smbus_read_i2c_block_data() fails but
mma8452_set_runtime_pm_state() succeeds, mma8452_read() returns 0.
As a result, the caller mma8452_read_raw() assumes the read was
successful and proceeds to use a buffer containing uninitialized
stack memory.
Add proper checking of the I2C read return value and propagate errors
to the caller. |
