| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: nxp-nci: allow GPIOs to sleep
Allow the firmware and enable GPIOs to sleep.
This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.
-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 -- |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix trace_marker copy link list updates
When the "copy_trace_marker" option is enabled for an instance, anything
written into /sys/kernel/tracing/trace_marker is also copied into that
instances buffer. When the option is set, that instance's trace_array
descriptor is added to the marker_copies link list. This list is protected
by RCU, as all iterations uses an RCU protected list traversal.
When the instance is deleted, all the flags that were enabled are cleared.
This also clears the copy_trace_marker flag and removes the trace_array
descriptor from the list.
The issue is after the flags are called, a direct call to
update_marker_trace() is performed to clear the flag. This function
returns true if the state of the flag changed and false otherwise. If it
returns true here, synchronize_rcu() is called to make sure all readers
see that its removed from the list.
But since the flag was already cleared, the state does not change and the
synchronization is never called, leaving a possible UAF bug.
Move the clearing of all flags below the updating of the copy_trace_marker
option which then makes sure the synchronization is performed.
Also use the flag for checking the state in update_marker_trace() instead
of looking at if the list is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bonding: fix NULL deref in bond_debug_rlb_hash_show
rlb_clear_slave intentionally keeps RLB hash-table entries on
the rx_hashtbl_used_head list with slave set to NULL when no
replacement slave is available. However, bond_debug_rlb_hash_show
visites client_info->slave without checking if it's NULL.
Other used-list iterators in bond_alb.c already handle this NULL-slave
state safely:
- rlb_update_client returns early on !client_info->slave
- rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalance
compare slave values before visiting
- lb_req_update_subnet_clients continues if slave is NULL
The following NULL deref crash can be trigger in
bond_debug_rlb_hash_show:
[ 1.289791] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 1.292058] RIP: 0010:bond_debug_rlb_hash_show (drivers/net/bonding/bond_debugfs.c:41)
[ 1.293101] RSP: 0018:ffffc900004a7d00 EFLAGS: 00010286
[ 1.293333] RAX: 0000000000000000 RBX: ffff888102b48200 RCX: ffff888102b48204
[ 1.293631] RDX: ffff888102b48200 RSI: ffffffff839daad5 RDI: ffff888102815078
[ 1.293924] RBP: ffff888102815078 R08: ffff888102b4820e R09: 0000000000000000
[ 1.294267] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100f929c0
[ 1.294564] R13: ffff888100f92a00 R14: 0000000000000001 R15: ffffc900004a7ed8
[ 1.294864] FS: 0000000001395380(0000) GS:ffff888196e75000(0000) knlGS:0000000000000000
[ 1.295239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.295480] CR2: 0000000000000000 CR3: 0000000102adc004 CR4: 0000000000772ef0
[ 1.295897] Call Trace:
[ 1.296134] seq_read_iter (fs/seq_file.c:231)
[ 1.296341] seq_read (fs/seq_file.c:164)
[ 1.296493] full_proxy_read (fs/debugfs/file.c:378 (discriminator 1))
[ 1.296658] vfs_read (fs/read_write.c:572)
[ 1.296981] ksys_read (fs/read_write.c:717)
[ 1.297132] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
[ 1.297325] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Add a NULL check and print "(none)" for entries with no assigned slave. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix missing runtime PM reference in ccs_mode_store
ccs_mode_store() calls xe_gt_reset() which internally invokes
xe_pm_runtime_get_noresume(). That function requires the caller
to already hold an outer runtime PM reference and warns if none
is held:
[46.891177] xe 0000:03:00.0: [drm] Missing outer runtime PM protection
[46.891178] WARNING: drivers/gpu/drm/xe/xe_pm.c:885 at
xe_pm_runtime_get_noresume+0x8b/0xc0
Fix this by protecting xe_gt_reset() with the scope-based
guard(xe_pm_runtime)(xe), which is the preferred form when
the reference lifetime matches a single scope.
v2:
- Use scope-based guard(xe_pm_runtime)(xe) (Shuicheng)
- Update commit message accordingly
(cherry picked from commit 7937ea733f79b3f25e802a0c8360bf7423856f36) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down
When the nl80211 socket that originated a PMSR request is
closed, cfg80211_release_pmsr() sets the request's nl_portid
to zero and schedules pmsr_free_wk to process the abort
asynchronously. If the interface is concurrently torn down
before that work runs, cfg80211_pmsr_wdev_down() calls
cfg80211_pmsr_process_abort() directly. However, the already-
scheduled pmsr_free_wk work item remains pending and may run
after the interface has been removed from the driver. This
could cause the driver's abort_pmsr callback to operate on a
torn-down interface, leading to undefined behavior and
potential crashes.
Cancel pmsr_free_wk synchronously in cfg80211_pmsr_wdev_down()
before calling cfg80211_pmsr_process_abort(). This ensures any
pending or in-progress work is drained before interface teardown
proceeds, preventing the work from invoking the driver abort
callback after the interface is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: bcm: bcm2835-power: Increase ASB control timeout
The bcm2835_asb_control() function uses a tight polling loop to wait
for the ASB bridge to acknowledge a request. During intensive workloads,
this handshake intermittently fails for V3D's master ASB on BCM2711,
resulting in "Failed to disable ASB master for v3d" errors during
runtime PM suspend. As a consequence, the failed power-off leaves V3D in
a broken state, leading to bus faults or system hangs on later accesses.
As the timeout is insufficient in some scenarios, increase the polling
timeout from 1us to 5us, which is still negligible in the context of a
power domain transition. Also, replace the open-coded ktime_get_ns()/
cpu_relax() polling loop with readl_poll_timeout_atomic(). |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Require sys_futex_requeue() to have identical flags
Nicholas reported that his LLM found it was possible to create a UaF
when sys_futex_requeue() is used with different flags. The initial
motivation for allowing different flags was the variable sized futex,
but since that hasn't been merged (yet), simply mandate the flags are
identical, as is the case for the old style sys_futex() requeue
operations. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Clear stale exiting pointer in futex_lock_pi() retry path
Fuzzying/stressing futexes triggered:
WARNING: kernel/futex/core.c:825 at wait_for_owner_exiting+0x7a/0x80, CPU#11: futex_lock_pi_s/524
When futex_lock_pi_atomic() sees the owner is exiting, it returns -EBUSY
and stores a refcounted task pointer in 'exiting'.
After wait_for_owner_exiting() consumes that reference, the local pointer
is never reset to nil. Upon a retry, if futex_lock_pi_atomic() returns a
different error, the bogus pointer is passed to wait_for_owner_exiting().
CPU0 CPU1 CPU2
futex_lock_pi(uaddr)
// acquires the PI futex
exit()
futex_cleanup_begin()
futex_state = EXITING;
futex_lock_pi(uaddr)
futex_lock_pi_atomic()
attach_to_pi_owner()
// observes EXITING
*exiting = owner; // takes ref
return -EBUSY
wait_for_owner_exiting(-EBUSY, owner)
put_task_struct(); // drops ref
// exiting still points to owner
goto retry;
futex_lock_pi_atomic()
lock_pi_update_atomic()
cmpxchg(uaddr)
*uaddr ^= WAITERS // whatever
// value changed
return -EAGAIN;
wait_for_owner_exiting(-EAGAIN, exiting) // stale
WARN_ON_ONCE(exiting)
Fix this by resetting upon retry, essentially aligning it with requeue_pi. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Make kvm_get_vcpu_by_cpuid() more robust
kvm_get_vcpu_by_cpuid() takes a cpuid parameter whose type is int, so
cpuid can be negative. Let kvm_get_vcpu_by_cpuid() return NULL for this
case so as to make it more robust.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: dsi: Store driver data before invoking mipi_dsi_host_register
The call to mipi_dsi_host_register triggers a callback to mtk_dsi_bind,
which uses dev_get_drvdata to retrieve the mtk_dsi struct, so this
structure needs to be stored inside the driver data before invoking it.
As drvdata is currently uninitialized it leads to a crash when
registering the DSI DRM encoder right after acquiring
the mode_config.idr_mutex, blocking all subsequent DRM operations.
Fixes the following crash during mediatek-drm probe (tested on Xiaomi
Smart Clock x04g):
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000040
[...]
Modules linked in: mediatek_drm(+) drm_display_helper cec drm_client_lib
drm_dma_helper drm_kms_helper panel_simple
[...]
Call trace:
drm_mode_object_add+0x58/0x98 (P)
__drm_encoder_init+0x48/0x140
drm_encoder_init+0x6c/0xa0
drm_simple_encoder_init+0x20/0x34 [drm_kms_helper]
mtk_dsi_bind+0x34/0x13c [mediatek_drm]
component_bind_all+0x120/0x280
mtk_drm_bind+0x284/0x67c [mediatek_drm]
try_to_bring_up_aggregate_device+0x23c/0x320
__component_add+0xa4/0x198
component_add+0x14/0x20
mtk_dsi_host_attach+0x78/0x100 [mediatek_drm]
mipi_dsi_attach+0x2c/0x50
panel_simple_dsi_probe+0x4c/0x9c [panel_simple]
mipi_dsi_drv_probe+0x1c/0x28
really_probe+0xc0/0x3dc
__driver_probe_device+0x80/0x160
driver_probe_device+0x40/0x120
__device_attach_driver+0xbc/0x17c
bus_for_each_drv+0x88/0xf0
__device_attach+0x9c/0x1cc
device_initial_probe+0x54/0x60
bus_probe_device+0x34/0xa0
device_add+0x5b0/0x800
mipi_dsi_device_register_full+0xdc/0x16c
mipi_dsi_host_register+0xc4/0x17c
mtk_dsi_probe+0x10c/0x260 [mediatek_drm]
platform_probe+0x5c/0xa4
really_probe+0xc0/0x3dc
__driver_probe_device+0x80/0x160
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1f8
bus_for_each_dev+0x7c/0xe0
driver_attach+0x24/0x30
bus_add_driver+0x11c/0x240
driver_register+0x68/0x130
__platform_register_drivers+0x64/0x160
mtk_drm_init+0x24/0x1000 [mediatek_drm]
do_one_initcall+0x60/0x1d0
do_init_module+0x54/0x240
load_module+0x1838/0x1dc0
init_module_from_file+0xd8/0xf0
__arm64_sys_finit_module+0x1b4/0x428
invoke_syscall.constprop.0+0x48/0xc8
do_el0_svc+0x3c/0xb8
el0_svc+0x34/0xe8
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800022 941004ab 2a0003f3 37f80040 (29005a80) |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: Use dev_consume_skb_any() to free TX SKBs
The napi_consume_skb() function is not intended to be called in an IRQ
disabled context. However, after commit 6bc8a5098bf4 ("net: macb: Fix
tx_ptr_lock locking"), the freeing of TX SKBs is performed with IRQs
disabled. To resolve the following call trace, use dev_consume_skb_any()
for freeing TX SKBs:
WARNING: kernel/softirq.c:430 at __local_bh_enable_ip+0x174/0x188, CPU#0: ksoftirqd/0/15
Modules linked in:
CPU: 0 UID: 0 PID: 15 Comm: ksoftirqd/0 Not tainted 7.0.0-rc4-next-20260319-yocto-standard-dirty #37 PREEMPT
Hardware name: ZynqMP ZCU102 Rev1.1 (DT)
pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __local_bh_enable_ip+0x174/0x188
lr : local_bh_enable+0x24/0x38
sp : ffff800082b3bb10
x29: ffff800082b3bb10 x28: ffff0008031f3c00 x27: 000000000011ede0
x26: ffff000800a7ff00 x25: ffff800083937ce8 x24: 0000000000017a80
x23: ffff000803243a78 x22: 0000000000000040 x21: 0000000000000000
x20: ffff000800394c80 x19: 0000000000000200 x18: 0000000000000001
x17: 0000000000000001 x16: ffff000803240000 x15: 0000000000000000
x14: ffffffffffffffff x13: 0000000000000028 x12: ffff000800395650
x11: ffff8000821d1528 x10: ffff800081c2bc08 x9 : ffff800081c1e258
x8 : 0000000100000301 x7 : ffff8000810426ec x6 : 0000000000000000
x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000
x2 : 0000000000000008 x1 : 0000000000000200 x0 : ffff8000810428dc
Call trace:
__local_bh_enable_ip+0x174/0x188 (P)
local_bh_enable+0x24/0x38
skb_attempt_defer_free+0x190/0x1d8
napi_consume_skb+0x58/0x108
macb_tx_poll+0x1a4/0x558
__napi_poll+0x50/0x198
net_rx_action+0x1f4/0x3d8
handle_softirqs+0x16c/0x560
run_ksoftirqd+0x44/0x80
smpboot_thread_fn+0x1d8/0x338
kthread+0x120/0x150
ret_from_fork+0x10/0x20
irq event stamp: 29751
hardirqs last enabled at (29750): [<ffff8000813be184>] _raw_spin_unlock_irqrestore+0x44/0x88
hardirqs last disabled at (29751): [<ffff8000813bdf60>] _raw_spin_lock_irqsave+0x38/0x98
softirqs last enabled at (29150): [<ffff8000800f1aec>] handle_softirqs+0x504/0x560
softirqs last disabled at (29153): [<ffff8000800f2fec>] run_ksoftirqd+0x44/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix base address calculation in kvm_eiointc_regs_access()
In function kvm_eiointc_regs_access(), the register base address is
caculated from array base address plus offset, the offset is absolute
value from the base address. The data type of array base address is
u64, it should be converted into the "void *" type and then plus the
offset. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix deadlock during netdev reset with active connections
Resolve deadlock that occurs when user executes netdev reset while RDMA
applications (e.g., rping) are active. The netdev reset causes ice
driver to remove irdma auxiliary driver, triggering device_delete and
subsequent client removal. During client removal, uverbs_client waits
for QP reference count to reach zero while cma_client holds the final
reference, creating circular dependency and indefinite wait in iWARP
mode. Skip QP reference count wait during device reset to prevent
deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix fence put before wait in amdgpu_amdkfd_submit_ib
amdgpu_amdkfd_submit_ib() submits a GPU job and gets a fence
from amdgpu_ib_schedule(). This fence is used to wait for job
completion.
Currently, the code drops the fence reference using dma_fence_put()
before calling dma_fence_wait().
If dma_fence_put() releases the last reference, the fence may be
freed before dma_fence_wait() is called. This can lead to a
use-after-free.
Fix this by waiting on the fence first and releasing the reference
only after dma_fence_wait() completes.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696)
(cherry picked from commit 8b9e5259adc385b61a6590a13b82ae0ac2bd3482) |
| In the Linux kernel, the following vulnerability has been resolved:
PM: sleep: Drop spurious WARN_ON() from pm_restore_gfp_mask()
Commit 35e4a69b2003f ("PM: sleep: Allow pm_restrict_gfp_mask()
stacking") introduced refcount-based GFP mask management that warns
when pm_restore_gfp_mask() is called with saved_gfp_count == 0.
Some hibernation paths call pm_restore_gfp_mask() defensively where
the GFP mask may or may not be restricted depending on the execution
path. For example, the uswsusp interface invokes it in
SNAPSHOT_CREATE_IMAGE, SNAPSHOT_UNFREEZE, and snapshot_release().
Before the stacking change this was a silent no-op; it now triggers
a spurious WARNING.
Remove the WARN_ON() wrapper from the !saved_gfp_count check while
retaining the check itself, so that defensive calls remain harmless
without producing false warnings.
[ rjw: Subject tweak ] |
| In the Linux kernel, the following vulnerability has been resolved:
s390/mm: Add missing secure storage access fixups for donated memory
There are special cases where secure storage access exceptions happen
in a kernel context for pages that don't have the PG_arch_1 bit
set. That bit is set for non-exported guest secure storage (memory)
but is absent on storage donated to the Ultravisor since the kernel
isn't allowed to export donated pages.
Prior to this patch we would try to export the page by calling
arch_make_folio_accessible() which would instantly return since the
arch bit is absent signifying that the page was already exported and
no further action is necessary. This leads to secure storage access
exception loops which can never be resolved.
With this patch we unconditionally try to export and if that fails we
fixup. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Handle the case that EIOINTC's coremap is empty
EIOINTC's coremap in eiointc_update_sw_coremap() can be empty, currently
we get a cpuid with -1 in this case, but we actually need 0 because it's
similar as the case that cpuid >= 4.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Unlink NV12 planes earlier
unlink_nv12_plane() will clobber parts of the plane state
potentially already set up by plane_atomic_check(), so we
must make sure not to call the two in the wrong order.
The problem happens when a plane previously selected as
a Y plane is now configured as a normal plane by user space.
plane_atomic_check() will first compute the proper plane
state based on the userspace request, and unlink_nv12_plane()
later clears some of the state.
This used to work on account of unlink_nv12_plane() skipping
the state clearing based on the plane visibility. But I removed
that check, thinking it was an impossible situation. Now when
that situation happens unlink_nv12_plane() will just WARN
and proceed to clobber the state.
Rather than reverting to the old way of doing things, I think
it's more clear if we unlink the NV12 planes before we even
compute the new plane state.
(cherry picked from commit 017ecd04985573eeeb0745fa2c23896fb22ee0cc) |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: designware: amdisp: Fix resume-probe race condition issue
Identified resume-probe race condition in kernel v7.0 with the commit
38fa29b01a6a ("i2c: designware: Combine the init functions"),but this
issue existed from the beginning though not detected.
The amdisp i2c device requires ISP to be in power-on state for probe
to succeed. To meet this requirement, this device is added to genpd
to control ISP power using runtime PM. The pm_runtime_get_sync() called
before i2c_dw_probe() triggers PM resume, which powers on ISP and also
invokes the amdisp i2c runtime resume before the probe completes resulting
in this race condition and a NULL dereferencing issue in v7.0
Fix this race condition by using the genpd APIs directly during probe:
- Call dev_pm_genpd_resume() to Power ON ISP before probe
- Call dev_pm_genpd_suspend() to Power OFF ISP after probe
- Set the device to suspended state with pm_runtime_set_suspended()
- Enable runtime PM only after the device is fully initialized |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: Fix kernel panic due to __initconst misuse
Fix a kernel panic when probing the driver as a module:
Unable to handle kernel paging request at virtual address
ffffd9c18eb05000
of_find_matching_node_and_match+0x5c/0x1a0
hantro_probe+0x2f4/0x7d0 [hantro_vpu]
The imx8mq_vpu_shared_resources array is referenced by variant
structures through their shared_devices field. When built as a
module, __initconst causes this data to be freed after module
init, but it's later accessed during probe, causing a page fault.
The imx8mq_vpu_shared_resources is referenced from non-init code,
so keeping __initconst or __initconst_or_module here is wrong.
Drop the __initconst annotation and let it live in the normal .rodata
section.
A bug of __initconst called from regular non-init probe code
leading to bugs during probe deferrals or during unbind-bind cycles. |
