| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix missing cleanup on rollforward recovery error
In an error injection test of a routine for mount-time recovery, KASAN
found a use-after-free bug.
It turned out that if data recovery was performed using partial logs
created by dsync writes, but an error occurred before starting the log
writer to create a recovered checkpoint, the inodes whose data had been
recovered were left in the ns_dirty_files list of the nilfs object and
were not freed.
Fix this issue by cleaning up inodes that have read the recovery data if
the recovery routine fails midway before the log writer starts. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: protect references to superblock parameters exposed in sysfs
The superblock buffers of nilfs2 can not only be overwritten at runtime
for modifications/repairs, but they are also regularly swapped, replaced
during resizing, and even abandoned when degrading to one side due to
backing device issues. So, accessing them requires mutual exclusion using
the reader/writer semaphore "nilfs->ns_sem".
Some sysfs attribute show methods read this superblock buffer without the
necessary mutual exclusion, which can cause problems with pointer
dereferencing and memory access, so fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Avoid excessive partition lengths
Avoid mounting filesystems where the partition would overflow the
32-bits used for block number. Also refuse to mount filesystems where
the partition length is so large we cannot safely index bits in a
block bitmap. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check denominator pbn_div before used
[WHAT & HOW]
A denominator cannot be 0, and is checked before used.
This fixes 1 DIVIDE_BY_ZERO issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: Remove proc entry when dev is unregistered.
syzkaller reported a warning in bcm_connect() below. [0]
The repro calls connect() to vxcan1, removes vxcan1, and calls
connect() with ifindex == 0.
Calling connect() for a BCM socket allocates a proc entry.
Then, bcm_sk(sk)->bound is set to 1 to prevent further connect().
However, removing the bound device resets bcm_sk(sk)->bound to 0
in bcm_notify().
The 2nd connect() tries to allocate a proc entry with the same
name and sets NULL to bcm_sk(sk)->bcm_proc_read, leaking the
original proc entry.
Since the proc entry is available only for connect()ed sockets,
let's clean up the entry when the bound netdev is unregistered.
[0]:
proc_dir_entry 'can-bcm/2456' already registered
WARNING: CPU: 1 PID: 394 at fs/proc/generic.c:376 proc_register+0x645/0x8f0 fs/proc/generic.c:375
Modules linked in:
CPU: 1 PID: 394 Comm: syz-executor403 Not tainted 6.10.0-rc7-g852e42cc2dd4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:proc_register+0x645/0x8f0 fs/proc/generic.c:375
Code: 00 00 00 00 00 48 85 ed 0f 85 97 02 00 00 4d 85 f6 0f 85 9f 02 00 00 48 c7 c7 9b cb cf 87 48 89 de 4c 89 fa e8 1c 6f eb fe 90 <0f> 0b 90 90 48 c7 c7 98 37 99 89 e8 cb 7e 22 05 bb 00 00 00 10 48
RSP: 0018:ffa0000000cd7c30 EFLAGS: 00010246
RAX: 9e129be1950f0200 RBX: ff1100011b51582c RCX: ff1100011857cd80
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002
RBP: 0000000000000000 R08: ffd400000000000f R09: ff1100013e78cac0
R10: ffac800000cd7980 R11: ff1100013e12b1f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ff1100011a99a2ec
FS: 00007fbd7086f740(0000) GS:ff1100013fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200071c0 CR3: 0000000118556004 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
proc_create_net_single+0x144/0x210 fs/proc/proc_net.c:220
bcm_connect+0x472/0x840 net/can/bcm.c:1673
__sys_connect_file net/socket.c:2049 [inline]
__sys_connect+0x5d2/0x690 net/socket.c:2066
__do_sys_connect net/socket.c:2076 [inline]
__se_sys_connect net/socket.c:2073 [inline]
__x64_sys_connect+0x8f/0x100 net/socket.c:2073
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fbd708b0e5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007fff8cd33f08 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fbd708b0e5d
RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000040 R09: 0000000000000040
R10: 0000000000000040 R11: 0000000000000246 R12: 00007fff8cd34098
R13: 0000000000401280 R14: 0000000000406de8 R15: 00007fbd70ab9000
</TASK>
remove_proc_entry: removing non-empty directory 'net/can-bcm', leaking at least '2456' |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Add netif_device_attach/detach into PF reset flow
Ethtool callbacks can be executed while reset is in progress and try to
access deleted resources, e.g. getting coalesce settings can result in a
NULL pointer dereference seen below.
Reproduction steps:
Once the driver is fully initialized, trigger reset:
# echo 1 > /sys/class/net/<interface>/device/reset
when reset is in progress try to get coalesce settings using ethtool:
# ethtool -c <interface>
BUG: kernel NULL pointer dereference, address: 0000000000000020
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 11 PID: 19713 Comm: ethtool Tainted: G S 6.10.0-rc7+ #7
RIP: 0010:ice_get_q_coalesce+0x2e/0xa0 [ice]
RSP: 0018:ffffbab1e9bcf6a8 EFLAGS: 00010206
RAX: 000000000000000c RBX: ffff94512305b028 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9451c3f2e588 RDI: ffff9451c3f2e588
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff9451c3f2e580 R11: 000000000000001f R12: ffff945121fa9000
R13: ffffbab1e9bcf760 R14: 0000000000000013 R15: ffffffff9e65dd40
FS: 00007faee5fbe740(0000) GS:ffff94546fd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000020 CR3: 0000000106c2e005 CR4: 00000000001706f0
Call Trace:
<TASK>
ice_get_coalesce+0x17/0x30 [ice]
coalesce_prepare_data+0x61/0x80
ethnl_default_doit+0xde/0x340
genl_family_rcv_msg_doit+0xf2/0x150
genl_rcv_msg+0x1b3/0x2c0
netlink_rcv_skb+0x5b/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x19c/0x290
netlink_sendmsg+0x222/0x490
__sys_sendto+0x1df/0x1f0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x82/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7faee60d8e27
Calling netif_device_detach() before reset makes the net core not call
the driver when ethtool command is issued, the attempt to execute an
ethtool command during reset will result in the following message:
netlink error: No such device
instead of NULL pointer dereference. Once reset is done and
ice_rebuild() is executing, the netif_device_attach() is called to allow
for ethtool operations to occur again in a safe manner. |
| In the Linux kernel, the following vulnerability has been resolved:
fou: Fix null-ptr-deref in GRO.
We observed a null-ptr-deref in fou_gro_receive() while shutting down
a host. [0]
The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol
in struct fou.
When fou_release() is called due to netns dismantle or explicit tunnel
teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data.
Then, the tunnel socket is destroyed after a single RCU grace period.
So, in-flight udp4_gro_receive() could find the socket and execute the
FOU GRO handler, where sk->sk_user_data could be NULL.
Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL
checks in FOU GRO handlers.
[0]:
BUG: kernel NULL pointer dereference, address: 0000000000000008
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0
SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1
Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017
RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou]
Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42
RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010
RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08
RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002
R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400
R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0
FS: 0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259)
? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420)
? no_context (arch/x86/mm/fault.c:752)
? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483)
? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571)
? fou_gro_receive (net/ipv4/fou.c:233) [fou]
udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559)
udp4_gro_receive (net/ipv4/udp_offload.c:604)
inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7))
dev_gro_receive (net/core/dev.c:6035 (discriminator 4))
napi_gro_receive (net/core/dev.c:6170)
ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena]
ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena]
napi_poll (net/core/dev.c:6847)
net_rx_action (net/core/dev.c:6917)
__do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299)
asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809)
</IRQ>
do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77)
irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435)
common_interrupt (arch/x86/kernel/irq.c:239)
asm_common_interrupt (arch/x86/include/asm/idtentry.h:626)
RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575)
Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 <fa> c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00
RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246
RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900
RDX: ffff93daee800000 RSI: ffff93d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv
The hotplug driver for powerpc (pci/hotplug/pnv_php.c) causes a kernel
crash when we try to hot-unplug/disable the PCIe switch/bridge from
the PHB.
The crash occurs because although the MSI data structure has been
released during disable/hot-unplug path and it has been assigned
with NULL, still during unregistration the code was again trying to
explicitly disable the MSI which causes the NULL pointer dereference and
kernel crash.
The patch fixes the check during unregistration path to prevent invoking
pci_disable_msi/msix() since its data structure is already freed. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (adc128d818) Fix underflows seen when writing limit attributes
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Do not return unused priv in mwifiex_get_priv_by_id()
mwifiex_get_priv_by_id() returns the priv pointer corresponding to
the bss_num and bss_type, but without checking if the priv is actually
currently in use.
Unused priv pointers do not have a wiphy attached to them which can
lead to NULL pointer dereferences further down the callstack. Fix
this by returning only used priv pointers which have priv->bss_mode
set to something else than NL80211_IFTYPE_UNSPECIFIED.
Said NULL pointer dereference happened when an Accesspoint was started
with wpa_supplicant -i mlan0 with this config:
network={
ssid="somessid"
mode=2
frequency=2412
key_mgmt=WPA-PSK WPA-PSK-SHA256
proto=RSN
group=CCMP
pairwise=CCMP
psk="12345678"
}
When waiting for the AP to be established, interrupting wpa_supplicant
with <ctrl-c> and starting it again this happens:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000140
| Mem abort info:
| ESR = 0x0000000096000004
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
| CM = 0, WnR = 0, TnD = 0, TagAccess = 0
| GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
| user pgtable: 4k pages, 48-bit VAs, pgdp=0000000046d96000
| [0000000000000140] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
| Modules linked in: caam_jr caamhash_desc spidev caamalg_desc crypto_engine authenc libdes mwifiex_sdio
+mwifiex crct10dif_ce cdc_acm onboard_usb_hub fsl_imx8_ddr_perf imx8m_ddrc rtc_ds1307 lm75 rtc_snvs
+imx_sdma caam imx8mm_thermal spi_imx error imx_cpufreq_dt fuse ip_tables x_tables ipv6
| CPU: 0 PID: 8 Comm: kworker/0:1 Not tainted 6.9.0-00007-g937242013fce-dirty #18
| Hardware name: somemachine (DT)
| Workqueue: events sdio_irq_work
| pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : mwifiex_get_cfp+0xd8/0x15c [mwifiex]
| lr : mwifiex_get_cfp+0x34/0x15c [mwifiex]
| sp : ffff8000818b3a70
| x29: ffff8000818b3a70 x28: ffff000006bfd8a5 x27: 0000000000000004
| x26: 000000000000002c x25: 0000000000001511 x24: 0000000002e86bc9
| x23: ffff000006bfd996 x22: 0000000000000004 x21: ffff000007bec000
| x20: 000000000000002c x19: 0000000000000000 x18: 0000000000000000
| x17: 000000040044ffff x16: 00500072b5503510 x15: ccc283740681e517
| x14: 0201000101006d15 x13: 0000000002e8ff43 x12: 002c01000000ffb1
| x11: 0100000000000000 x10: 02e8ff43002c0100 x9 : 0000ffb100100157
| x8 : ffff000003d20000 x7 : 00000000000002f1 x6 : 00000000ffffe124
| x5 : 0000000000000001 x4 : 0000000000000003 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : 0001000000011001 x0 : 0000000000000000
| Call trace:
| mwifiex_get_cfp+0xd8/0x15c [mwifiex]
| mwifiex_parse_single_response_buf+0x1d0/0x504 [mwifiex]
| mwifiex_handle_event_ext_scan_report+0x19c/0x2f8 [mwifiex]
| mwifiex_process_sta_event+0x298/0xf0c [mwifiex]
| mwifiex_process_event+0x110/0x238 [mwifiex]
| mwifiex_main_process+0x428/0xa44 [mwifiex]
| mwifiex_sdio_interrupt+0x64/0x12c [mwifiex_sdio]
| process_sdio_pending_irqs+0x64/0x1b8
| sdio_irq_work+0x4c/0x7c
| process_one_work+0x148/0x2a0
| worker_thread+0x2fc/0x40c
| kthread+0x110/0x114
| ret_from_fork+0x10/0x20
| Code: a94153f3 a8c37bfd d50323bf d65f03c0 (f940a000)
| ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: replace BUG_ON() with error handling at update_ref_for_cow()
Instead of a BUG_ON() just return an error, log an error message and
abort the transaction in case we find an extent buffer belonging to the
relocation tree that doesn't have the full backref flag set. This is
unexpected and should never happen (save for bugs or a potential bad
memory). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Add missing bridge lock to pci_bus_lock()
One of the true positives that the cfg_access_lock lockdep effort
identified is this sequence:
WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70
RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70
Call Trace:
<TASK>
? __warn+0x8c/0x190
? pci_bridge_secondary_bus_reset+0x5d/0x70
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? pci_bridge_secondary_bus_reset+0x5d/0x70
pci_reset_bus+0x1d8/0x270
vmd_probe+0x778/0xa10
pci_device_probe+0x95/0x120
Where pci_reset_bus() users are triggering unlocked secondary bus resets.
Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses
pci_bus_lock() before issuing the reset which locks everything *but* the
bridge itself.
For the same motivation as adding:
bridge = pci_upstream_bridge(dev);
if (bridge)
pci_dev_lock(bridge);
to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add
pci_dev_lock() for @bus->self to pci_bus_lock().
[bhelgaas: squash in recursive locking deadlock fix from Keith Busch:
https://lore.kernel.org/r/20240711193650.701834-1-kbusch@meta.com] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: cougar: fix slab-out-of-bounds Read in cougar_report_fixup
report_fixup for the Cougar 500k Gaming Keyboard was not verifying
that the report descriptor size was correct before accessing it |
| In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: free driver_data after destroying hid device
HID driver callbacks aren't called anymore once hid_destroy_device() has
been called. Hence, hid driver_data should be freed only after the
hid_destroy_device() function returned as driver_data is used in several
callbacks.
I observed a crash with kernel 6.10.0 on my T14s Gen 3, after enabling
KASAN to debug memory allocation, I got this output:
[ 13.050438] ==================================================================
[ 13.054060] BUG: KASAN: slab-use-after-free in amd_sfh_get_report+0x3ec/0x530 [amd_sfh]
[ 13.054809] psmouse serio1: trackpoint: Synaptics TrackPoint firmware: 0x02, buttons: 3/3
[ 13.056432] Read of size 8 at addr ffff88813152f408 by task (udev-worker)/479
[ 13.060970] CPU: 5 PID: 479 Comm: (udev-worker) Not tainted 6.10.0-arch1-2 #1 893bb55d7f0073f25c46adbb49eb3785fefd74b0
[ 13.063978] Hardware name: LENOVO 21CQCTO1WW/21CQCTO1WW, BIOS R22ET70W (1.40 ) 03/21/2024
[ 13.067860] Call Trace:
[ 13.069383] input: TPPS/2 Synaptics TrackPoint as /devices/platform/i8042/serio1/input/input8
[ 13.071486] <TASK>
[ 13.071492] dump_stack_lvl+0x5d/0x80
[ 13.074870] snd_hda_intel 0000:33:00.6: enabling device (0000 -> 0002)
[ 13.078296] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.082199] print_report+0x174/0x505
[ 13.085776] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 13.089367] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.093255] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.097464] kasan_report+0xc8/0x150
[ 13.101461] ? amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.105802] amd_sfh_get_report+0x3ec/0x530 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.110303] amdtp_hid_request+0xb8/0x110 [amd_sfh 05f43221435b5205f734cd9da29399130f398a38]
[ 13.114879] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.119450] sensor_hub_get_feature+0x1d3/0x540 [hid_sensor_hub 3f13be3016ff415bea03008d45d99da837ee3082]
[ 13.124097] hid_sensor_parse_common_attributes+0x4d0/0xad0 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5]
[ 13.127404] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.131925] ? __pfx_hid_sensor_parse_common_attributes+0x10/0x10 [hid_sensor_iio_common c3a5cbe93969c28b122609768bbe23efe52eb8f5]
[ 13.136455] ? _raw_spin_lock_irqsave+0x96/0xf0
[ 13.140197] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 13.143602] ? devm_iio_device_alloc+0x34/0x50 [industrialio 3d261d5e5765625d2b052be40e526d62b1d2123b]
[ 13.147234] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.150446] ? __devm_add_action+0x167/0x1d0
[ 13.155061] hid_gyro_3d_probe+0x120/0x7f0 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172]
[ 13.158581] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.161814] platform_probe+0xa2/0x150
[ 13.165029] really_probe+0x1e3/0x8a0
[ 13.168243] __driver_probe_device+0x18c/0x370
[ 13.171500] driver_probe_device+0x4a/0x120
[ 13.175000] __driver_attach+0x190/0x4a0
[ 13.178521] ? __pfx___driver_attach+0x10/0x10
[ 13.181771] bus_for_each_dev+0x106/0x180
[ 13.185033] ? __pfx__raw_spin_lock+0x10/0x10
[ 13.188229] ? __pfx_bus_for_each_dev+0x10/0x10
[ 13.191446] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.194382] bus_add_driver+0x29e/0x4d0
[ 13.197328] driver_register+0x1a5/0x360
[ 13.200283] ? __pfx_hid_gyro_3d_platform_driver_init+0x10/0x10 [hid_sensor_gyro_3d 63da36a143b775846ab2dbb86c343b401b5e3172]
[ 13.203362] do_one_initcall+0xa7/0x380
[ 13.206432] ? __pfx_do_one_initcall+0x10/0x10
[ 13.210175] ? srso_alias_return_thunk+0x5/0xfbef5
[ 13.213211] ? kasan_unpoison+0x44/0x70
[ 13.216688] do_init_module+0x238/0x750
[ 13.2196
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Input: uinput - reject requests with unreasonable number of slots
When exercising uinput interface syzkaller may try setting up device
with a really large number of slots, which causes memory allocation
failure in input_mt_init_slots(). While this allocation failure is
handled properly and request is rejected, it results in syzkaller
reports. Additionally, such request may put undue burden on the
system which will try to free a lot of memory for a bogus request.
Fix it by limiting allowed number of slots to 100. This can easily
be extended if we see devices that can track more than 100 contacts. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: sanity check symbolic link size
Syzkiller reports a "KMSAN: uninit-value in pick_link" bug.
This is caused by an uninitialised page, which is ultimately caused
by a corrupted symbolic link size read from disk.
The reason why the corrupted symlink size causes an uninitialised
page is due to the following sequence of events:
1. squashfs_read_inode() is called to read the symbolic
link from disk. This assigns the corrupted value
3875536935 to inode->i_size.
2. Later squashfs_symlink_read_folio() is called, which assigns
this corrupted value to the length variable, which being a
signed int, overflows producing a negative number.
3. The following loop that fills in the page contents checks that
the copied bytes is less than length, which being negative means
the loop is skipped, producing an uninitialised page.
This patch adds a sanity check which checks that the symbolic
link size is not larger than expected.
--
V2: fix spelling mistake. |
| In the Linux kernel, the following vulnerability has been resolved:
of/irq: Prevent device address out-of-bounds read in interrupt map walk
When of_irq_parse_raw() is invoked with a device address smaller than
the interrupt parent node (from #address-cells property), KASAN detects
the following out-of-bounds read when populating the initial match table
(dyndbg="func of_irq_parse_* +p"):
OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0
OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2
OF: intspec=4
OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2
OF: -> addrsize=3
==================================================================
BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0
Read of size 4 at addr ffffff81beca5608 by task bash/764
CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1
Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023
Call trace:
dump_backtrace+0xdc/0x130
show_stack+0x1c/0x30
dump_stack_lvl+0x6c/0x84
print_report+0x150/0x448
kasan_report+0x98/0x140
__asan_load4+0x78/0xa0
of_irq_parse_raw+0x2b8/0x8d0
of_irq_parse_one+0x24c/0x270
parse_interrupts+0xc0/0x120
of_fwnode_add_links+0x100/0x2d0
fw_devlink_parse_fwtree+0x64/0xc0
device_add+0xb38/0xc30
of_device_add+0x64/0x90
of_platform_device_create_pdata+0xd0/0x170
of_platform_bus_create+0x244/0x600
of_platform_notify+0x1b0/0x254
blocking_notifier_call_chain+0x9c/0xd0
__of_changeset_entry_notify+0x1b8/0x230
__of_changeset_apply_notify+0x54/0xe4
of_overlay_fdt_apply+0xc04/0xd94
...
The buggy address belongs to the object at ffffff81beca5600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffffff81beca5600, ffffff81beca5680)
The buggy address belongs to the physical page:
page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4
head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
==================================================================
OF: -> got it !
Prevent the out-of-bounds read by copying the device address into a
buffer of sufficient size. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix UAF caused by offsets overwrite
Binder objects are processed and copied individually into the target
buffer during transactions. Any raw data in-between these objects is
copied as well. However, this raw data copy lacks an out-of-bounds
check. If the raw data exceeds the data section size then the copy
overwrites the offsets section. This eventually triggers an error that
attempts to unwind the processed objects. However, at this point the
offsets used to index these objects are now corrupted.
Unwinding with corrupted offsets can result in decrements of arbitrary
nodes and lead to their premature release. Other users of such nodes are
left with a dangling pointer triggering a use-after-free. This issue is
made evident by the following KASAN report (trimmed):
==================================================================
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c
Write of size 4 at addr ffff47fc91598f04 by task binder-util/743
CPU: 9 UID: 0 PID: 743 Comm: binder-util Not tainted 6.11.0-rc4 #1
Hardware name: linux,dummy-virt (DT)
Call trace:
_raw_spin_lock+0xe4/0x19c
binder_free_buf+0x128/0x434
binder_thread_write+0x8a4/0x3260
binder_ioctl+0x18f0/0x258c
[...]
Allocated by task 743:
__kmalloc_cache_noprof+0x110/0x270
binder_new_node+0x50/0x700
binder_transaction+0x413c/0x6da8
binder_thread_write+0x978/0x3260
binder_ioctl+0x18f0/0x258c
[...]
Freed by task 745:
kfree+0xbc/0x208
binder_thread_read+0x1c5c/0x37d4
binder_ioctl+0x16d8/0x258c
[...]
==================================================================
To avoid this issue, let's check that the raw data copy is within the
boundaries of the data section. |
| In the Linux kernel, the following vulnerability has been resolved:
uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind
For primary VM Bus channels, primary_channel pointer is always NULL. This
pointer is valid only for the secondary channels. Also, rescind callback
is meant for primary channels only.
Fix NULL pointer dereference by retrieving the device_obj from the parent
for the primary channel. |
| In the Linux kernel, the following vulnerability has been resolved:
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
When removing a resource from vmci_resource_table in
vmci_resource_remove(), the search is performed using the resource
handle by comparing context and resource fields.
It is possible though to create two resources with different types
but same handle (same context and resource fields).
When trying to remove one of the resources, vmci_resource_remove()
may not remove the intended one, but the object will still be freed
as in the case of the datagram type in vmci_datagram_destroy_handle().
vmci_resource_table will still hold a pointer to this freed resource
leading to a use-after-free vulnerability.
BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106
print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239
__kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425
kasan_report+0x38/0x51 mm/kasan/report.c:442
vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182
ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444
kref_put include/linux/kref.h:65 [inline]
vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline]
vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195
vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143
__fput+0x261/0xa34 fs/file_table.c:282
task_work_run+0xf0/0x194 kernel/task_work.c:164
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187
exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220
__syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline]
syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313
do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x6e/0x0
This change ensures the type is also checked when removing
the resource from vmci_resource_table in vmci_resource_remove(). |
