| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix NULL i_assoc_inode dereference in nilfs_mdt_save_to_shadow_map
The DAT inode's btree node cache (i_assoc_inode) is initialized lazily
during btree operations. However, nilfs_mdt_save_to_shadow_map()
assumes i_assoc_inode is already initialized when copying dirty pages
to the shadow map during GC.
If NILFS_IOCTL_CLEAN_SEGMENTS is called immediately after mount before
any btree operation has occurred on the DAT inode, i_assoc_inode is
NULL leading to a general protection fault.
Fix this by calling nilfs_attach_btree_node_cache() on the DAT inode
in nilfs_dat_read() at mount time, ensuring i_assoc_inode is always
initialized before any GC operation can use it. |
| In the Linux kernel, the following vulnerability has been resolved:
media: as102: fix to not free memory after the device is registered in as102_usb_probe()
In as102_usb driver, the following race condition occurs:
```
CPU0 CPU1
as102_usb_probe()
kzalloc(); // alloc as102_dev_t
....
usb_register_dev();
fd = sys_open("/path/to/dev"); // open as102 fd
....
usb_deregister_dev();
....
kfree(); // free as102_dev_t
....
sys_close(fd);
as102_release() // UAF!!
as102_usb_release()
kfree(); // DFB!!
```
When a USB character device registered with usb_register_dev() is later
unregistered (via usb_deregister_dev() or disconnect), the device node is
removed so new open() calls fail. However, file descriptors that are
already open do not go away immediately: they remain valid until the last
reference is dropped and the driver's .release() is invoked.
In as102, as102_usb_probe() calls usb_register_dev() and then, on an
error path, does usb_deregister_dev() and frees as102_dev_t right away.
If userspace raced a successful open() before the deregistration, that
open FD will later hit as102_release() --> as102_usb_release() and access
or free as102_dev_t again, occur a race to use-after-free and
double-free vuln.
The fix is to never kfree(as102_dev_t) directly once usb_register_dev()
has succeeded. After deregistration, defer freeing memory to .release().
In other words, let release() perform the last kfree when the final open
FD is closed. |
| In the Linux kernel, the following vulnerability has been resolved:
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wg_netns_pre_exit() manually acquires rtnl_lock() inside the
pernet .pre_exit callback. This causes a hung task when another
thread holds rtnl_mutex - the cleanup_net workqueue (or the
setup_net failure rollback path) blocks indefinitely in
wg_netns_pre_exit() waiting to acquire the lock.
Convert to .exit_rtnl, introduced in commit 7a60d91c690b ("net:
Add ->exit_rtnl() hook to struct pernet_operations."), where the
framework already holds RTNL and batches all callbacks under a
single rtnl_lock()/rtnl_unlock() pair, eliminating the contention
window.
The rcu_assign_pointer(wg->creating_net, NULL) is safe to move
from .pre_exit to .exit_rtnl (which runs after synchronize_rcu())
because all RCU readers of creating_net either use maybe_get_net()
- which returns NULL for a dying namespace with zero refcount - or
access net->user_ns which remains valid throughout the entire
ops_undo_list sequence.
[ Jason: added __net_exit and __read_mostly annotations that were missing. ] |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: 6fire: fix use-after-free on disconnect
In usb6fire_chip_abort(), the chip struct is allocated as the card's
private data (via snd_card_new with sizeof(struct sfire_chip)). When
snd_card_free_when_closed() is called and no file handles are open, the
card and embedded chip are freed synchronously. The subsequent
chip->card = NULL write then hits freed slab memory.
Call trace:
usb6fire_chip_abort sound/usb/6fire/chip.c:59 [inline]
usb6fire_chip_disconnect+0x348/0x358 sound/usb/6fire/chip.c:182
usb_unbind_interface+0x1a8/0x88c drivers/usb/core/driver.c:458
...
hub_event+0x1a04/0x4518 drivers/usb/core/hub.c:5953
Fix by moving the card lifecycle out of usb6fire_chip_abort() and into
usb6fire_chip_disconnect(). The card pointer is saved in a local
before any teardown, snd_card_disconnect() is called first to prevent
new opens, URBs are aborted while chip is still valid, and
snd_card_free_when_closed() is called last so chip is never accessed
after the card may be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (powerz) Fix use-after-free on USB disconnect
After powerz_disconnect() frees the URB and releases the mutex, a
subsequent powerz_read() call can acquire the mutex and call
powerz_read_data(), which dereferences the freed URB pointer.
Fix by:
- Setting priv->urb to NULL in powerz_disconnect() so that
powerz_read_data() can detect the disconnected state.
- Adding a !priv->urb check at the start of powerz_read_data()
to return -ENODEV on a disconnected device.
- Moving usb_set_intfdata() before hwmon registration so the
disconnect handler can always find the priv pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
media: em28xx: fix use-after-free in em28xx_v4l2_open()
em28xx_v4l2_open() reads dev->v4l2 without holding dev->lock,
creating a race with em28xx_v4l2_init()'s error path and
em28xx_v4l2_fini(), both of which free the em28xx_v4l2 struct
and set dev->v4l2 to NULL under dev->lock.
This race leads to two issues:
- use-after-free in v4l2_fh_init() when accessing vdev->ctrl_handler,
since the video_device is embedded in the freed em28xx_v4l2 struct.
- NULL pointer dereference in em28xx_resolution_set() when accessing
v4l2->norm, since dev->v4l2 has been set to NULL.
Fix this by moving the mutex_lock() before the dev->v4l2 read and
adding a NULL check for dev->v4l2 under the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: fix use-after-free in encoder release path
The fops_vcodec_release() function frees the context structure (ctx)
without first cancelling any pending or running work in ctx->encode_work.
This creates a race window where the workqueue handler (mtk_venc_worker)
may still be accessing the context memory after it has been freed.
Race condition:
CPU 0 (release path) CPU 1 (workqueue)
--------------------- ------------------
fops_vcodec_release()
v4l2_m2m_ctx_release()
v4l2_m2m_cancel_job()
// waits for m2m job "done"
mtk_venc_worker()
v4l2_m2m_job_finish()
// m2m job "done"
// BUT worker still running!
// post-job_finish access:
other ctx dereferences
// UAF if ctx already freed
// returns (job "done")
kfree(ctx) // ctx freed
Root cause: The v4l2_m2m_ctx_release() only waits for the m2m job
lifecycle (via TRANS_RUNNING flag), not the workqueue lifecycle.
After v4l2_m2m_job_finish() is called, the m2m framework considers
the job complete and v4l2_m2m_ctx_release() returns, but the worker
function continues executing and may still access ctx.
The work is queued during encode operations via:
queue_work(ctx->dev->encode_workqueue, &ctx->encode_work)
The worker function accesses ctx->m2m_ctx, ctx->dev, and other ctx
fields even after calling v4l2_m2m_job_finish().
This vulnerability was confirmed with KASAN by running an instrumented
test module that widens the post-job_finish race window. KASAN detected:
BUG: KASAN: slab-use-after-free in mtk_venc_worker+0x159/0x180
Read of size 4 at addr ffff88800326e000 by task kworker/u8:0/12
Workqueue: mtk_vcodec_enc_wq mtk_venc_worker
Allocated by task 47:
__kasan_kmalloc+0x7f/0x90
fops_vcodec_open+0x85/0x1a0
Freed by task 47:
__kasan_slab_free+0x43/0x70
kfree+0xee/0x3a0
fops_vcodec_release+0xb7/0x190
Fix this by calling cancel_work_sync(&ctx->encode_work) before kfree(ctx).
This ensures the workqueue handler is both cancelled (if pending) and
synchronized (waits for any running handler to complete) before the
context is freed.
Placement rationale: The fix is placed after v4l2_ctrl_handler_free()
and before list_del_init(&ctx->list). At this point, all m2m operations
are done (v4l2_m2m_ctx_release() has returned), and we need to ensure
the workqueue is synchronized before removing ctx from the list and
freeing it.
Note: The open error path does NOT need cancel_work_sync() because
INIT_WORK() only initializes the work structure - it does not schedule
it. Work is only scheduled later during device_run() operations. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: fix nfeeds state corruption on start_streaming failure
syzbot reported a memory leak in vidtv_psi_service_desc_init [1].
When vidtv_start_streaming() fails inside vidtv_start_feed(), the
nfeeds counter is left incremented even though no feed was actually
started. This corrupts the driver state: subsequent start_feed calls
see nfeeds > 1 and skip starting the mux, while stop_feed calls
eventually try to stop a non-existent stream.
This state corruption can also lead to memory leaks, since the mux
and channel resources may be partially allocated during a failed
start_streaming but never cleaned up, as the stop path finds
dvb->streaming == false and returns early.
Fix by decrementing nfeeds back when start_streaming fails, keeping
the counter in sync with the actual number of active feeds.
[1]
BUG: memory leak
unreferenced object 0xffff888145b50820 (size 32):
comm "syz.0.17", pid 6068, jiffies 4294944486
backtrace (crc 90a0c7d4):
vidtv_psi_service_desc_init+0x74/0x1b0 drivers/media/test-drivers/vidtv/vidtv_psi.c:288
vidtv_channel_s302m_init+0xb1/0x2a0 drivers/media/test-drivers/vidtv/vidtv_channel.c:83
vidtv_channels_init+0x1b/0x40 drivers/media/test-drivers/vidtv/vidtv_channel.c:524
vidtv_mux_init+0x516/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:518
vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 [inline]
vidtv_start_feed+0x33e/0x4d0 drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: blk-cgroup: fix use-after-free in cgwb_release_workfn()
cgwb_release_workfn() calls css_put(wb->blkcg_css) and then later accesses
wb->blkcg_css again via blkcg_unpin_online(). If css_put() drops the last
reference, the blkcg can be freed asynchronously (css_free_rwork_fn ->
blkcg_css_free -> kfree) before blkcg_unpin_online() dereferences the
pointer to access blkcg->online_pin, resulting in a use-after-free:
BUG: KASAN: slab-use-after-free in blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367)
Write of size 4 at addr ff11000117aa6160 by task kworker/71:1/531
Workqueue: cgwb_release cgwb_release_workfn
Call Trace:
<TASK>
blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367)
cgwb_release_workfn (mm/backing-dev.c:629)
process_scheduled_works (kernel/workqueue.c:3278 kernel/workqueue.c:3385)
Freed by task 1016:
kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6246 mm/slub.c:6561)
css_free_rwork_fn (kernel/cgroup/cgroup.c:5542)
process_scheduled_works (kernel/workqueue.c:3302 kernel/workqueue.c:3385)
** Stack based on commit 66672af7a095 ("Add linux-next specific files
for 20260410")
I am seeing this crash sporadically in Meta fleet across multiple kernel
versions. A full reproducer is available at:
https://github.com/leitao/debug/blob/main/reproducers/repro_blkcg_uaf.sh
(The race window is narrow. To make it easily reproducible, inject a
msleep(100) between css_put() and blkcg_unpin_online() in
cgwb_release_workfn(). With that delay and a KASAN-enabled kernel, the
reproducer triggers the splat reliably in less than a second.)
Fix this by moving blkcg_unpin_online() before css_put(), so the
cgwb's CSS reference keeps the blkcg alive while blkcg_unpin_online()
accesses it. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Drop WARN on large size for KVM_MEMORY_ENCRYPT_REG_REGION
Drop the WARN in sev_pin_memory() on npages overflowing an int, as the
WARN is comically trivially to trigger from userspace, e.g. by doing:
struct kvm_enc_region range = {
.addr = 0,
.size = -1ul,
};
__vm_ioctl(vm, KVM_MEMORY_ENCRYPT_REG_REGION, &range);
Note, the checks in sev_mem_enc_register_region() that presumably exist to
verify the incoming address+size are completely worthless, as both "addr"
and "size" are u64s and SEV is 64-bit only, i.e. they _can't_ be greater
than ULONG_MAX. That wart will be cleaned up in the near future.
if (range->addr > ULONG_MAX || range->size > ULONG_MAX)
return -EINVAL;
Opportunistically add a comment to explain why the code calculates the
number of pages the "hard" way, e.g. instead of just shifting @ulen. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Lock all vCPUs when synchronzing VMSAs for SNP launch finish
Lock all vCPUs when synchronizing and encrypting VMSAs for SNP guests, as
allowing userspace to manipulate and/or run a vCPU while its state is being
synchronized would at best corrupt vCPU state, and at worst crash the host
kernel.
Opportunistically assert that vcpu->mutex is held when synchronizing its
VMSA (the SEV-ES path already locks vCPUs). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-epf-vntb: Remove duplicate resource teardown
epf_ntb_epc_destroy() duplicates the teardown that the caller is
supposed to perform later. This leads to an oops when .allow_link fails
or when .drop_link is performed. The following is an example oops of the
former case:
Unable to handle kernel paging request at virtual address dead000000000108
[...]
[dead000000000108] address between user and kernel address ranges
Internal error: Oops: 0000000096000044 [#1] SMP
[...]
Call trace:
pci_epc_remove_epf+0x78/0xe0 (P)
pci_primary_epc_epf_link+0x88/0xa8
configfs_symlink+0x1f4/0x5a0
vfs_symlink+0x134/0x1d8
do_symlinkat+0x88/0x138
__arm64_sys_symlinkat+0x74/0xe0
[...]
Remove the helper, and drop pci_epc_put(). EPC device refcounting is
tied to the configfs EPC group lifetime, and pci_epc_put() in the
.drop_link path is sufficient. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: handle invalid dinode in ocfs2_group_extend
[BUG]
kernel BUG at fs/ocfs2/resize.c:308!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ocfs2_group_extend+0x10aa/0x1ae0 fs/ocfs2/resize.c:308
Code: 8b8520ff ffff83f8 860f8580 030000e8 5cc3c1fe
Call Trace:
...
ocfs2_ioctl+0x175/0x6e0 fs/ocfs2/ioctl.c:869
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
[CAUSE]
ocfs2_group_extend() assumes that the global bitmap inode block
returned from ocfs2_inode_lock() has already been validated and
BUG_ONs when the signature is not a dinode. That assumption is too
strong for crafted filesystems because the JBD2-managed buffer path
can bypass structural validation and return an invalid dinode to the
resize ioctl.
[FIX]
Validate the dinode explicitly in ocfs2_group_extend(). If the global
bitmap buffer does not contain a valid dinode, report filesystem
corruption with ocfs2_error() and fail the resize operation instead of
crashing the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY
filemap_fault() may drop the mmap_lock before returning VM_FAULT_RETRY,
as documented in mm/filemap.c:
"If our return value has VM_FAULT_RETRY set, it's because the mmap_lock
may be dropped before doing I/O or by lock_folio_maybe_drop_mmap()."
When this happens, a concurrent munmap() can call remove_vma() and free
the vm_area_struct via RCU. The saved 'vma' pointer in ocfs2_fault() then
becomes a dangling pointer, and the subsequent trace_ocfs2_fault() call
dereferences it -- a use-after-free.
Fix this by saving ip_blkno as a plain integer before calling
filemap_fault(), and removing vma from the trace event. Since
ip_blkno is copied by value before the lock can be dropped, it
remains valid regardless of what happens to the vma or inode
afterward. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix possible deadlock between unlink and dio_end_io_write
ocfs2_unlink takes orphan dir inode_lock first and then ip_alloc_sem,
while in ocfs2_dio_end_io_write, it acquires these locks in reverse order.
This creates an ABBA lock ordering violation on lock classes
ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] and
ocfs2_file_ip_alloc_sem_key.
Lock Chain #0 (orphan dir inode_lock -> ip_alloc_sem):
ocfs2_unlink
ocfs2_prepare_orphan_dir
ocfs2_lookup_lock_orphan_dir
inode_lock(orphan_dir_inode) <- lock A
__ocfs2_prepare_orphan_dir
ocfs2_prepare_dir_for_insert
ocfs2_extend_dir
ocfs2_expand_inline_dir
down_write(&oi->ip_alloc_sem) <- Lock B
Lock Chain #1 (ip_alloc_sem -> orphan dir inode_lock):
ocfs2_dio_end_io_write
down_write(&oi->ip_alloc_sem) <- Lock B
ocfs2_del_inode_from_orphan()
inode_lock(orphan_dir_inode) <- Lock A
Deadlock Scenario:
CPU0 (unlink) CPU1 (dio_end_io_write)
------ ------
inode_lock(orphan_dir_inode)
down_write(ip_alloc_sem)
down_write(ip_alloc_sem)
inode_lock(orphan_dir_inode)
Since ip_alloc_sem is to protect allocation changes, which is unrelated
with operations in ocfs2_del_inode_from_orphan. So move
ocfs2_del_inode_from_orphan out of ip_alloc_sem to fix the deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: fix NULL pointer dereference in vidtv_channel_pmt_match_sections
syzbot reported a general protection fault in vidtv_psi_desc_assign [1].
vidtv_psi_pmt_stream_init() can return NULL on memory allocation
failure, but vidtv_channel_pmt_match_sections() does not check for
this. When tail is NULL, the subsequent call to
vidtv_psi_desc_assign(&tail->descriptor, desc) dereferences a NULL
pointer offset, causing a general protection fault.
Add a NULL check after vidtv_psi_pmt_stream_init(). On failure, clean
up the already-allocated stream chain and return.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:vidtv_psi_desc_assign+0x24/0x90 drivers/media/test-drivers/vidtv/vidtv_psi.c:629
Call Trace:
<TASK>
vidtv_channel_pmt_match_sections drivers/media/test-drivers/vidtv/vidtv_channel.c:349 [inline]
vidtv_channel_si_init+0x1445/0x1a50 drivers/media/test-drivers/vidtv/vidtv_channel.c:479
vidtv_mux_init+0x526/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:519
vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 [inline]
vidtv_start_feed+0x33e/0x4d0 drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Limit PTP to a single page
Commit 391e69143d0a increased CT_PTP_NUM from 1 to 4 to support 256
playback streams, but the additional pages are not used by the card
correctly. The CT20K2 hardware already has multiple VMEM_PTPAL
registers, but using them separately would require refactoring the
entire virtual memory allocation logic.
ct_vm_map() always uses PTEs in vm->ptp[0].area regardless of
CT_PTP_NUM. On AMD64 systems, a single PTP covers 512 PTEs (2M). When
aggregate memory allocations exceed this limit, ct_vm_map() tries to
access beyond the allocated space and causes a page fault:
BUG: unable to handle page fault for address: ffffd4ae8a10a000
Oops: Oops: 0002 [#1] SMP PTI
RIP: 0010:ct_vm_map+0x17c/0x280 [snd_ctxfi]
Call Trace:
atc_pcm_playback_prepare+0x225/0x3b0
ct_pcm_playback_prepare+0x38/0x60
snd_pcm_do_prepare+0x2f/0x50
snd_pcm_action_single+0x36/0x90
snd_pcm_action_nonatomic+0xbf/0xd0
snd_pcm_ioctl+0x28/0x40
__x64_sys_ioctl+0x97/0xe0
do_syscall_64+0x81/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Revert CT_PTP_NUM to 1. The 256 SRC_RESOURCE_NUM and playback_count
remain unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: sm750fb: fix division by zero in ps_to_hz()
ps_to_hz() is called from hw_sm750_crtc_set_mode() without validating
that pixclock is non-zero. A zero pixclock passed via FBIOPUT_VSCREENINFO
causes a division by zero.
Fix by rejecting zero pixclock in lynxfb_ops_check_var(), consistent
with other framebuffer drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix device leak on probe failure
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
This driver takes a reference to the USB device during probe but does
not to release it on all probe errors (e.g. when descriptor parsing
fails).
Drop the redundant device reference to fix the leak, reduce cargo
culting, make it easier to spot drivers where an extra reference is
needed, and reduce the risk of further memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: udlfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO
Much like commit 19f953e74356 ("fbdev: fb_pm2fb: Avoid potential divide
by zero error"), we also need to prevent that same crash from happening
in the udlfb driver as it uses pixclock directly when dividing, which
will crash. |
