| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: smartpqi: Correct device removal for multi-actuator devices
Correct device count for multi-actuator drives which can cause kernel
panics. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: smscufx: Fix several use-after-free bugs
Several types of UAFs can occur when physically removing a USB device.
Adds ufx_ops_destroy() function to .fb_destroy of fb_ops, and
in this function, there is kref_put() that finally calls ufx_free().
This fix prevents multiple UAFs. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6/sit: use DEV_STATS_INC() to avoid data-races
syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error
concurrently.
This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit()
is not protected by a spinlock.
While original KCSAN report was about tx path, rx path has the same issue. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: vt6655: fix potential memory leak
In function device_init_td0_ring, memory is allocated for member
td_info of priv->apTD0Rings[i], with i increasing from 0. In case of
allocation failure, the memory is freed in reversed order, with i
decreasing to 0. However, the case i=0 is left out and thus memory is
leaked.
Modify the memory freeing loop to include the case i=0. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Avoid double brelse() in udf_rename()
syzbot reported a warning like below [1]:
VFS: brelse: Trying to free free buffer
WARNING: CPU: 2 PID: 7301 at fs/buffer.c:1145 __brelse+0x67/0xa0
...
Call Trace:
<TASK>
invalidate_bh_lru+0x99/0x150
smp_call_function_many_cond+0xe2a/0x10c0
? generic_remap_file_range_prep+0x50/0x50
? __brelse+0xa0/0xa0
? __mutex_lock+0x21c/0x12d0
? smp_call_on_cpu+0x250/0x250
? rcu_read_lock_sched_held+0xb/0x60
? lock_release+0x587/0x810
? __brelse+0xa0/0xa0
? generic_remap_file_range_prep+0x50/0x50
on_each_cpu_cond_mask+0x3c/0x80
blkdev_flush_mapping+0x13a/0x2f0
blkdev_put_whole+0xd3/0xf0
blkdev_put+0x222/0x760
deactivate_locked_super+0x96/0x160
deactivate_super+0xda/0x100
cleanup_mnt+0x222/0x3d0
task_work_run+0x149/0x240
? task_work_cancel+0x30/0x30
do_exit+0xb29/0x2a40
? reacquire_held_locks+0x4a0/0x4a0
? do_raw_spin_lock+0x12a/0x2b0
? mm_update_next_owner+0x7c0/0x7c0
? rwlock_bug.part.0+0x90/0x90
? zap_other_threads+0x234/0x2d0
do_group_exit+0xd0/0x2a0
__x64_sys_exit_group+0x3a/0x50
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The cause of the issue is that brelse() is called on both ofibh.sbh
and ofibh.ebh by udf_find_entry() when it returns NULL. However,
brelse() is called by udf_rename(), too. So, b_count on buffer_head
becomes unbalanced.
This patch fixes the issue by not calling brelse() by udf_rename()
when udf_find_entry() returns NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on summary info
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=216456
BUG: KASAN: use-after-free in recover_data+0x63ae/0x6ae0 [f2fs]
Read of size 4 at addr ffff8881464dcd80 by task mount/1013
CPU: 3 PID: 1013 Comm: mount Tainted: G W 6.0.0-rc4 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x5e
print_report.cold+0xf3/0x68d
kasan_report+0xa8/0x130
recover_data+0x63ae/0x6ae0 [f2fs]
f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs]
f2fs_fill_super+0x4665/0x61e0 [f2fs]
mount_bdev+0x2cf/0x3b0
legacy_get_tree+0xed/0x1d0
vfs_get_tree+0x81/0x2b0
path_mount+0x47e/0x19d0
do_mount+0xce/0xf0
__x64_sys_mount+0x12c/0x1a0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause is: in fuzzed image, SSA table is corrupted: ofs_in_node
is larger than ADDRS_PER_PAGE(), result in out-of-range access on 4k-size
page.
- recover_data
- do_recover_data
- check_index_in_prev_nodes
- f2fs_data_blkaddr
This patch adds sanity check on summary info in recovery and GC flow
in where the flows rely on them.
After patch:
[ 29.310883] F2FS-fs (loop0): Inconsistent ofs_in_node:65286 in summary, ino:0, nid:6, max:1018 |
| In the Linux kernel, the following vulnerability has been resolved:
acct: fix potential integer overflow in encode_comp_t()
The integer overflow is descripted with following codes:
> 317 static comp_t encode_comp_t(u64 value)
> 318 {
> 319 int exp, rnd;
......
> 341 exp <<= MANTSIZE;
> 342 exp += value;
> 343 return exp;
> 344 }
Currently comp_t is defined as type of '__u16', but the variable 'exp' is
type of 'int', so overflow would happen when variable 'exp' in line 343 is
greater than 65535. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs
During I/O and simultaneous cat of /sys/kernel/debug/lpfc/fnX/rx_monitor, a
hard lockup similar to the call trace below may occur.
The spin_lock_bh in lpfc_rx_monitor_report is not protecting from timer
interrupts as expected, so change the strength of the spin lock to _irq.
Kernel panic - not syncing: Hard LOCKUP
CPU: 3 PID: 110402 Comm: cat Kdump: loaded
exception RIP: native_queued_spin_lock_slowpath+91
[IRQ stack]
native_queued_spin_lock_slowpath at ffffffffb814e30b
_raw_spin_lock at ffffffffb89a667a
lpfc_rx_monitor_record at ffffffffc0a73a36 [lpfc]
lpfc_cmf_timer at ffffffffc0abbc67 [lpfc]
__hrtimer_run_queues at ffffffffb8184250
hrtimer_interrupt at ffffffffb8184ab0
smp_apic_timer_interrupt at ffffffffb8a026ba
apic_timer_interrupt at ffffffffb8a01c4f
[End of IRQ stack]
apic_timer_interrupt at ffffffffb8a01c4f
lpfc_rx_monitor_report at ffffffffc0a73c80 [lpfc]
lpfc_rx_monitor_read at ffffffffc0addde1 [lpfc]
full_proxy_read at ffffffffb83e7fc3
vfs_read at ffffffffb833fe71
ksys_read at ffffffffb83402af
do_syscall_64 at ffffffffb800430b
entry_SYSCALL_64_after_hwframe at ffffffffb8a000ad |
| In the Linux kernel, the following vulnerability has been resolved:
media: imx-jpeg: Disable useless interrupt to avoid kernel panic
There is a hardware bug that the interrupt STMBUF_HALF may be triggered
after or when disable interrupt.
It may led to unexpected kernel panic.
And interrupt STMBUF_HALF and STMBUF_RTND have no other effect.
So disable them and the unused interrupts.
meanwhile clear the interrupt status when disable interrupt. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add null pointer check for inode operations
This adds a sanity check for the i_op pointer of the inode which is
returned after reading Root directory MFT record. We should check the
i_op is valid before trying to create the root dentry, otherwise we may
encounter a NPD while mounting a image with a funny Root directory MFT
record.
[ 114.484325] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 114.484811] #PF: supervisor read access in kernel mode
[ 114.485084] #PF: error_code(0x0000) - not-present page
[ 114.485606] PGD 0 P4D 0
[ 114.485975] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 114.486570] CPU: 0 PID: 237 Comm: mount Tainted: G B 6.0.0-rc4 #28
[ 114.486977] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 114.488169] RIP: 0010:d_flags_for_inode+0xe0/0x110
[ 114.488816] Code: 24 f7 ff 49 83 3e 00 74 41 41 83 cd 02 66 44 89 6b 02 eb 92 48 8d 7b 20 e8 6d 24 f7 ff 4c 8b 73 20 49 8d 7e 08 e8 60 241
[ 114.490326] RSP: 0018:ffff8880065e7aa8 EFLAGS: 00000296
[ 114.490695] RAX: 0000000000000001 RBX: ffff888008ccd750 RCX: ffffffff84af2aea
[ 114.490986] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff87abd020
[ 114.491364] RBP: ffff8880065e7ac8 R08: 0000000000000001 R09: fffffbfff0f57a05
[ 114.491675] R10: ffffffff87abd027 R11: fffffbfff0f57a04 R12: 0000000000000000
[ 114.491954] R13: 0000000000000008 R14: 0000000000000000 R15: ffff888008ccd750
[ 114.492397] FS: 00007fdc8a627e40(0000) GS:ffff888058200000(0000) knlGS:0000000000000000
[ 114.492797] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 114.493150] CR2: 0000000000000008 CR3: 00000000013ba000 CR4: 00000000000006f0
[ 114.493671] Call Trace:
[ 114.493890] <TASK>
[ 114.494075] __d_instantiate+0x24/0x1c0
[ 114.494505] d_instantiate.part.0+0x35/0x50
[ 114.494754] d_make_root+0x53/0x80
[ 114.494998] ntfs_fill_super+0x1232/0x1b50
[ 114.495260] ? put_ntfs+0x1d0/0x1d0
[ 114.495499] ? vsprintf+0x20/0x20
[ 114.495723] ? set_blocksize+0x95/0x150
[ 114.495964] get_tree_bdev+0x232/0x370
[ 114.496272] ? put_ntfs+0x1d0/0x1d0
[ 114.496502] ntfs_fs_get_tree+0x15/0x20
[ 114.496859] vfs_get_tree+0x4c/0x130
[ 114.497099] path_mount+0x654/0xfe0
[ 114.497507] ? putname+0x80/0xa0
[ 114.497933] ? finish_automount+0x2e0/0x2e0
[ 114.498362] ? putname+0x80/0xa0
[ 114.498571] ? kmem_cache_free+0x1c4/0x440
[ 114.498819] ? putname+0x80/0xa0
[ 114.499069] do_mount+0xd6/0xf0
[ 114.499343] ? path_mount+0xfe0/0xfe0
[ 114.499683] ? __kasan_check_write+0x14/0x20
[ 114.500133] __x64_sys_mount+0xca/0x110
[ 114.500592] do_syscall_64+0x3b/0x90
[ 114.500930] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 114.501294] RIP: 0033:0x7fdc898e948a
[ 114.501542] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 114.502716] RSP: 002b:00007ffd793e58f8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
[ 114.503175] RAX: ffffffffffffffda RBX: 0000564b2228f060 RCX: 00007fdc898e948a
[ 114.503588] RDX: 0000564b2228f260 RSI: 0000564b2228f2e0 RDI: 0000564b22297ce0
[ 114.504925] RBP: 0000000000000000 R08: 0000564b2228f280 R09: 0000000000000020
[ 114.505484] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000564b22297ce0
[ 114.505823] R13: 0000564b2228f260 R14: 0000000000000000 R15: 00000000ffffffff
[ 114.506562] </TASK>
[ 114.506887] Modules linked in:
[ 114.507648] CR2: 0000000000000008
[ 114.508884] ---[ end trace 0000000000000000 ]---
[ 114.509675] RIP: 0010:d_flags_for_inode+0xe0/0x110
[ 114.510140] Code: 24 f7 ff 49 83 3e 00 74 41 41 83 cd 02 66 44 89 6b 02 eb 92 48 8d 7b 20 e8 6d 24 f7 ff 4c 8b 73 20 49 8d 7e 08 e8 60 241
[ 114.511762] RSP: 0018:ffff8880065e7aa8 EFLAGS: 00000296
[ 114.512401] RAX: 0000000000000001 RBX: ffff888008ccd750 RCX: ffffffff84af2aea
[ 114.51
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Validate index root when initialize NTFS security
This enhances the sanity check for $SDH and $SII while initializing NTFS
security, guarantees these index root are legit.
[ 162.459513] BUG: KASAN: use-after-free in hdr_find_e.isra.0+0x10c/0x320
[ 162.460176] Read of size 2 at addr ffff8880037bca99 by task mount/243
[ 162.460851]
[ 162.461252] CPU: 0 PID: 243 Comm: mount Not tainted 6.0.0-rc7 #42
[ 162.461744] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 162.462609] Call Trace:
[ 162.462954] <TASK>
[ 162.463276] dump_stack_lvl+0x49/0x63
[ 162.463822] print_report.cold+0xf5/0x689
[ 162.464608] ? unwind_get_return_address+0x3a/0x60
[ 162.465766] ? hdr_find_e.isra.0+0x10c/0x320
[ 162.466975] kasan_report+0xa7/0x130
[ 162.467506] ? _raw_spin_lock_irq+0xc0/0xf0
[ 162.467998] ? hdr_find_e.isra.0+0x10c/0x320
[ 162.468536] __asan_load2+0x68/0x90
[ 162.468923] hdr_find_e.isra.0+0x10c/0x320
[ 162.469282] ? cmp_uints+0xe0/0xe0
[ 162.469557] ? cmp_sdh+0x90/0x90
[ 162.469864] ? ni_find_attr+0x214/0x300
[ 162.470217] ? ni_load_mi+0x80/0x80
[ 162.470479] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 162.470931] ? ntfs_bread_run+0x190/0x190
[ 162.471307] ? indx_get_root+0xe4/0x190
[ 162.471556] ? indx_get_root+0x140/0x190
[ 162.471833] ? indx_init+0x1e0/0x1e0
[ 162.472069] ? fnd_clear+0x115/0x140
[ 162.472363] ? _raw_spin_lock_irqsave+0x100/0x100
[ 162.472731] indx_find+0x184/0x470
[ 162.473461] ? sysvec_apic_timer_interrupt+0x57/0xc0
[ 162.474429] ? indx_find_buffer+0x2d0/0x2d0
[ 162.474704] ? do_syscall_64+0x3b/0x90
[ 162.474962] dir_search_u+0x196/0x2f0
[ 162.475381] ? ntfs_nls_to_utf16+0x450/0x450
[ 162.475661] ? ntfs_security_init+0x3d6/0x440
[ 162.475906] ? is_sd_valid+0x180/0x180
[ 162.476191] ntfs_extend_init+0x13f/0x2c0
[ 162.476496] ? ntfs_fix_post_read+0x130/0x130
[ 162.476861] ? iput.part.0+0x286/0x320
[ 162.477325] ntfs_fill_super+0x11e0/0x1b50
[ 162.477709] ? put_ntfs+0x1d0/0x1d0
[ 162.477970] ? vsprintf+0x20/0x20
[ 162.478258] ? set_blocksize+0x95/0x150
[ 162.478538] get_tree_bdev+0x232/0x370
[ 162.478789] ? put_ntfs+0x1d0/0x1d0
[ 162.479038] ntfs_fs_get_tree+0x15/0x20
[ 162.479374] vfs_get_tree+0x4c/0x130
[ 162.479729] path_mount+0x654/0xfe0
[ 162.480124] ? putname+0x80/0xa0
[ 162.480484] ? finish_automount+0x2e0/0x2e0
[ 162.480894] ? putname+0x80/0xa0
[ 162.481467] ? kmem_cache_free+0x1c4/0x440
[ 162.482280] ? putname+0x80/0xa0
[ 162.482714] do_mount+0xd6/0xf0
[ 162.483264] ? path_mount+0xfe0/0xfe0
[ 162.484782] ? __kasan_check_write+0x14/0x20
[ 162.485593] __x64_sys_mount+0xca/0x110
[ 162.486024] do_syscall_64+0x3b/0x90
[ 162.486543] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 162.487141] RIP: 0033:0x7f9d374e948a
[ 162.488324] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 162.489728] RSP: 002b:00007ffe30e73d18 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
[ 162.490971] RAX: ffffffffffffffda RBX: 0000561cdb43a060 RCX: 00007f9d374e948a
[ 162.491669] RDX: 0000561cdb43a260 RSI: 0000561cdb43a2e0 RDI: 0000561cdb442af0
[ 162.492050] RBP: 0000000000000000 R08: 0000561cdb43a280 R09: 0000000000000020
[ 162.492459] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000561cdb442af0
[ 162.493183] R13: 0000561cdb43a260 R14: 0000000000000000 R15: 00000000ffffffff
[ 162.493644] </TASK>
[ 162.493908]
[ 162.494214] The buggy address belongs to the physical page:
[ 162.494761] page:000000003e38a3d5 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x37bc
[ 162.496064] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
[ 162.497278] raw: 000fffffc0000000 ffffea00000df1c8 ffffea00000df008 0000000000000000
[ 162.498928] raw: 0000000000000000 0000000000240000 0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: do not run mt76u_status_worker if the device is not running
Fix the following NULL pointer dereference avoiding to run
mt76u_status_worker thread if the device is not running yet.
KASAN: null-ptr-deref in range
[0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 98 Comm: kworker/u2:2 Not tainted 5.14.0+ #78 Hardware
name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: mt76 mt76u_tx_status_data
RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0
Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f>
b6
04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7
RSP: 0018:ffffc900005af988 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a
RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c
R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8
R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28
FS: 0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
mt76x02_send_tx_status+0x1d2/0xeb0
mt76x02_tx_status_data+0x8e/0xd0
mt76u_tx_status_data+0xe1/0x240
process_one_work+0x92b/0x1460
worker_thread+0x95/0xe00
kthread+0x3a1/0x480
ret_from_fork+0x1f/0x30
Modules linked in:
--[ end trace 8df5d20fc5040f65 ]--
RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0
Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f>
b6
04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7
RSP: 0018:ffffc900005af988 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a
RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c
R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8
R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28
FS: 0000000000000000(0000) GS:ffff88811aa00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0
PKRU: 55555554
Moreover move stat_work schedule out of the for loop. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: idmouse: fix an uninit-value in idmouse_open
In idmouse_create_image, if any ftip_command fails, it will
go to the reset label. However, this leads to the data in
bulk_in_buffer[HEADER..IMGSIZE] uninitialized. And the check
for valid image incurs an uninitialized dereference.
Fix this by moving the check before reset label since this
check only be valid if the data after bulk_in_buffer[HEADER]
has concrete data.
Note that this is found by KMSAN, so only kernel compilation
is tested. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/lcs: Fix return type of lcs_start_xmit()
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/s390/net/lcs.c:2090:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = lcs_start_xmit,
^~~~~~~~~~~~~~
drivers/s390/net/lcs.c:2097:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = lcs_start_xmit,
^~~~~~~~~~~~~~
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of lcs_start_xmit() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/apic: Don't disable x2APIC if locked
The APIC supports two modes, legacy APIC (or xAPIC), and Extended APIC
(or x2APIC). X2APIC mode is mostly compatible with legacy APIC, but
it disables the memory-mapped APIC interface in favor of one that uses
MSRs. The APIC mode is controlled by the EXT bit in the APIC MSR.
The MMIO/xAPIC interface has some problems, most notably the APIC LEAK
[1]. This bug allows an attacker to use the APIC MMIO interface to
extract data from the SGX enclave.
Introduce support for a new feature that will allow the BIOS to lock
the APIC in x2APIC mode. If the APIC is locked in x2APIC mode and the
kernel tries to disable the APIC or revert to legacy APIC mode a GP
fault will occur.
Introduce support for a new MSR (IA32_XAPIC_DISABLE_STATUS) and handle
the new locked mode when the LEGACY_XAPIC_DISABLED bit is set by
preventing the kernel from trying to disable the x2APIC.
On platforms with the IA32_XAPIC_DISABLE_STATUS MSR, if SGX or TDX are
enabled the LEGACY_XAPIC_DISABLED will be set by the BIOS. If
legacy APIC is required, then it SGX and TDX need to be disabled in the
BIOS.
[1]: https://aepicleak.com/aepicleak.pdf |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: line6: fix stack overflow in line6_midi_transmit
Correctly calculate available space including the size of the chunk
buffer. This fixes a buffer overflow when multiple MIDI sysex
messages are sent to a PODxt device. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: add bounds check on Transfer Tag
ttag is used as an index to get cmd in nvmet_tcp_handle_h2c_data_pdu(),
add a bounds check to avoid out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out
syzkaller reported use-after-free with the stack trace like below [1]:
[ 38.960489][ C3] ==================================================================
[ 38.963216][ C3] BUG: KASAN: use-after-free in ar5523_cmd_tx_cb+0x220/0x240
[ 38.964950][ C3] Read of size 8 at addr ffff888048e03450 by task swapper/3/0
[ 38.966363][ C3]
[ 38.967053][ C3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.0.0-09039-ga6afa4199d3d-dirty #18
[ 38.968464][ C3] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[ 38.969959][ C3] Call Trace:
[ 38.970841][ C3] <IRQ>
[ 38.971663][ C3] dump_stack_lvl+0xfc/0x174
[ 38.972620][ C3] print_report.cold+0x2c3/0x752
[ 38.973626][ C3] ? ar5523_cmd_tx_cb+0x220/0x240
[ 38.974644][ C3] kasan_report+0xb1/0x1d0
[ 38.975720][ C3] ? ar5523_cmd_tx_cb+0x220/0x240
[ 38.976831][ C3] ar5523_cmd_tx_cb+0x220/0x240
[ 38.978412][ C3] __usb_hcd_giveback_urb+0x353/0x5b0
[ 38.979755][ C3] usb_hcd_giveback_urb+0x385/0x430
[ 38.981266][ C3] dummy_timer+0x140c/0x34e0
[ 38.982925][ C3] ? notifier_call_chain+0xb5/0x1e0
[ 38.984761][ C3] ? rcu_read_lock_sched_held+0xb/0x60
[ 38.986242][ C3] ? lock_release+0x51c/0x790
[ 38.987323][ C3] ? _raw_read_unlock_irqrestore+0x37/0x70
[ 38.988483][ C3] ? __wake_up_common_lock+0xde/0x130
[ 38.989621][ C3] ? reacquire_held_locks+0x4a0/0x4a0
[ 38.990777][ C3] ? lock_acquire+0x472/0x550
[ 38.991919][ C3] ? rcu_read_lock_sched_held+0xb/0x60
[ 38.993138][ C3] ? lock_acquire+0x472/0x550
[ 38.994890][ C3] ? dummy_urb_enqueue+0x860/0x860
[ 38.996266][ C3] ? do_raw_spin_unlock+0x16f/0x230
[ 38.997670][ C3] ? dummy_urb_enqueue+0x860/0x860
[ 38.999116][ C3] call_timer_fn+0x1a0/0x6a0
[ 39.000668][ C3] ? add_timer_on+0x4a0/0x4a0
[ 39.002137][ C3] ? reacquire_held_locks+0x4a0/0x4a0
[ 39.003809][ C3] ? __next_timer_interrupt+0x226/0x2a0
[ 39.005509][ C3] __run_timers.part.0+0x69a/0xac0
[ 39.007025][ C3] ? dummy_urb_enqueue+0x860/0x860
[ 39.008716][ C3] ? call_timer_fn+0x6a0/0x6a0
[ 39.010254][ C3] ? cpuacct_percpu_seq_show+0x10/0x10
[ 39.011795][ C3] ? kvm_sched_clock_read+0x14/0x40
[ 39.013277][ C3] ? sched_clock_cpu+0x69/0x2b0
[ 39.014724][ C3] run_timer_softirq+0xb6/0x1d0
[ 39.016196][ C3] __do_softirq+0x1d2/0x9be
[ 39.017616][ C3] __irq_exit_rcu+0xeb/0x190
[ 39.019004][ C3] irq_exit_rcu+0x5/0x20
[ 39.020361][ C3] sysvec_apic_timer_interrupt+0x8f/0xb0
[ 39.021965][ C3] </IRQ>
[ 39.023237][ C3] <TASK>
In ar5523_probe(), ar5523_host_available() calls ar5523_cmd() as below
(there are other functions which finally call ar5523_cmd()):
ar5523_probe()
-> ar5523_host_available()
-> ar5523_cmd_read()
-> ar5523_cmd()
If ar5523_cmd() timed out, then ar5523_host_available() failed and
ar5523_probe() freed the device structure. So, ar5523_cmd_tx_cb()
might touch the freed structure.
This patch fixes this issue by canceling in-flight tx cmd if submitted
urb timed out. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: stop mdx_raid1 thread when raid1 array run failed
fail run raid1 array when we assemble array with the inactive disk only,
but the mdx_raid1 thread were not stop, Even if the associated resources
have been released. it will caused a NULL dereference when we do poweroff.
This causes the following Oops:
[ 287.587787] BUG: kernel NULL pointer dereference, address: 0000000000000070
[ 287.594762] #PF: supervisor read access in kernel mode
[ 287.599912] #PF: error_code(0x0000) - not-present page
[ 287.605061] PGD 0 P4D 0
[ 287.607612] Oops: 0000 [#1] SMP NOPTI
[ 287.611287] CPU: 3 PID: 5265 Comm: md0_raid1 Tainted: G U 5.10.146 #0
[ 287.619029] Hardware name: xxxxxxx/To be filled by O.E.M, BIOS 5.19 06/16/2022
[ 287.626775] RIP: 0010:md_check_recovery+0x57/0x500 [md_mod]
[ 287.632357] Code: fe 01 00 00 48 83 bb 10 03 00 00 00 74 08 48 89 ......
[ 287.651118] RSP: 0018:ffffc90000433d78 EFLAGS: 00010202
[ 287.656347] RAX: 0000000000000000 RBX: ffff888105986800 RCX: 0000000000000000
[ 287.663491] RDX: ffffc90000433bb0 RSI: 00000000ffffefff RDI: ffff888105986800
[ 287.670634] RBP: ffffc90000433da0 R08: 0000000000000000 R09: c0000000ffffefff
[ 287.677771] R10: 0000000000000001 R11: ffffc90000433ba8 R12: ffff888105986800
[ 287.684907] R13: 0000000000000000 R14: fffffffffffffe00 R15: ffff888100b6b500
[ 287.692052] FS: 0000000000000000(0000) GS:ffff888277f80000(0000) knlGS:0000000000000000
[ 287.700149] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 287.705897] CR2: 0000000000000070 CR3: 000000000320a000 CR4: 0000000000350ee0
[ 287.713033] Call Trace:
[ 287.715498] raid1d+0x6c/0xbbb [raid1]
[ 287.719256] ? __schedule+0x1ff/0x760
[ 287.722930] ? schedule+0x3b/0xb0
[ 287.726260] ? schedule_timeout+0x1ed/0x290
[ 287.730456] ? __switch_to+0x11f/0x400
[ 287.734219] md_thread+0xe9/0x140 [md_mod]
[ 287.738328] ? md_thread+0xe9/0x140 [md_mod]
[ 287.742601] ? wait_woken+0x80/0x80
[ 287.746097] ? md_register_thread+0xe0/0xe0 [md_mod]
[ 287.751064] kthread+0x11a/0x140
[ 287.754300] ? kthread_park+0x90/0x90
[ 287.757974] ret_from_fork+0x1f/0x30
In fact, when raid1 array run fail, we need to do
md_unregister_thread() before raid1_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
ice: set tx_tstamps when creating new Tx rings via ethtool
When the user changes the number of queues via ethtool, the driver
allocates new rings. This allocation did not initialize tx_tstamps. This
results in the tx_tstamps field being zero (due to kcalloc allocation), and
would result in a NULL pointer dereference when attempting a transmit
timestamp on the new ring. |
