| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An high privileged remote attacker can exploit an authenticated OS command injection vulnerability in the system_certificates view due to improper neutralization of special elements in an OS command. This can result in a total loss of confidentiality, availability and integrity. |
| oras-go is a Go library for managing OCI artifacts. Prior to 2.6.1, registry/remote/repository.go in blobStore.completePushAfterInitialPost follows a registry-controlled Location header during monolithic blob upload and reuses the Authorization header from the initial POST request for the subsequent PUT request, allowing a malicious registry to return a cross-host Location and receive the caller's credentials at an attacker-controlled endpoint. This issue is fixed in version 2.6.1. |
| css_parser is a Ruby CSS parser. From 2.2.0 until 3.0.0, CssParser::Parser#read_remote_file in lib/css_parser/parser.rb, and therefore load_uri! and the @import-following branch of add_block!, issued HTTP and HTTPS requests against any host, port, and URI without a scheme allowlist, host or IP filtering, or protection against link-local, loopback, or RFC-1918 addresses. Location: redirects were followed recursively back into the same function, which also serviced file:// URIs, so a single attacker-controlled HTTP redirect could upgrade the bug from SSRF to arbitrary local file disclosure. Any consumer of css_parser that hands it attacker-influenced CSS together with a base_uri: option is exposed. This issue is fixed in version 3.0.0. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.9 and 6.9.4.2, all implementations of FHIRPathEngine accept arbitrary FHIRPath expressions and evaluate them without input validation, and the FHIRPath functions matches(), matchesFull(), and replaceMatches() pass user-controlled regular expressions to Java's Pattern.compile() and String.replaceAll() through an incomplete timeout utility. An attacker can send a resource containing an evil regex pattern that causes catastrophic backtracking, exhausting CPU resources and causing denial of service in the FHIR Validator HTTP endpoint and affected org.hl7.fhir.* modules. This issue is fixed in versions 6.9.9 and 6.9.4.2. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix __vm_normal_page() to handle missing support for pmd_special()/pud_special()
On x86 32-bit with THP enabled, zap_huge_pmd() is seen to generate a
"WARNING: mm/memory.c:735 at __vm_normal_page+0x6a/0x7d", from the
VM_WARN_ON_ONCE(is_zero_pfn(pfn) || is_huge_zero_pfn(pfn)); followed by
"BUG: Bad rss-counter state"s, then later "BUG: Bad page state"s when
reclaim gets to call shrink_huge_zero_folio_scan().
It's as if the _PAGE_SPECIAL bit never got set in the huge_zero pmd: and
indeed, whereas pte_special() and pte_mkspecial() are subject to a
dedicated CONFIG_ARCH_HAS_PTE_SPECIAL, pmd_special() and pmd_mkspecial()
are subject to CONFIG_ARCH_SUPPORTS_PMD_PFNMAP, which is never enabled on
any 32-bit architecture.
While the problem was exposed through commit d80a9cb1a64a
("mm/huge_memory: add and use normal_or_softleaf_folio_pmd()"), it was an
oversight in commit af38538801c6 ("mm/memory: factor out common code from
vm_normal_page_*()") and would result in other problems:
* huge zero folio accounted in smaps, pagemap (PAGE_IS_FILE) and
numamaps as file-backed THP
* folio_walk_start() returning the folio even without FW_ZEROPAGE set.
Callers seem to tolerate that, though.
... and triggering the VM_WARN_ON_ONE(), although never reported so far.
To fix it, teach vm_normal_page_pmd()/vm_normal_page_pud() to consider
whether pmd_special/pud_special is actually implemented. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: Fix UAF read of dev->name
bnep_add_connection() needs to keep holding the bnep_session_sem while
reading dev->name (just like bnep_get_connlist() does); otherwise the
bnep_session() thread can concurrently free the net_device, which can for
example be triggered by a concurrent bnep_del_connection().
(This UAF is fairly uninteresting from a security perspective;
calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN)
check. It also requires completely tearing down a netdev during a fairly
tight race window.) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix driver-set TX rates on old devices
On old devices such as 7265D, rates are still encoded in version 1
format, which doesn't use the CCK/OFDM rate index (0-3/0-7) but
rather their PLCP value (e.g. 10 for 1 Mbps CCK rate.)
While introducing v3 rates, I changed the driver from internally
handling v1 rates and converting to v2, to internally handling v3
and converting to v1 or v2 according to the firmware. I accordingly
changed the code in iwl_mvm_mac80211_idx_to_hwrate() to no longer
have different values for different APIs. This was correct.
However, I later reverted this part of the change, because it was
reported that I had broken beacon rates, causing a FW assert/crash.
This caused TX_CMD rates to be set incorrectly, potentially causing
a warning when reported back from the device as having been used.
Fix this (hopefully correctly now) by handling beacon rates in the
TX_CMD that's embedded in the beacon template command separately.
Restore iwl_mvm_mac80211_idx_to_hwrate() to return only the rate
index, not PLCP value, fixing the real TX_CMD. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: stop TX during firmware restart
When iwlwifi firmware crashes (e.g., NMI_INTERRUPT_UNKNOWN on Intel
BE201/Wi-Fi 7), iwl_mld_nic_error() sets mld->fw_status.in_hw_restart
to true. However, iwl_mld_tx_from_txq() does not check this flag before
dequeuing frames from mac80211 and pushing them to the transport layer.
Since the firmware is dead, iwl_trans_tx() returns -EIO for each frame,
which then gets freed immediately. Under high-throughput conditions
(e.g., Tailscale UDP traffic or active SSH sessions), this creates a
tight dequeue-send-fail-free loop that wastes CPU cycles and generates
rapid skb allocation churn, leading to memory pressure from slab
fragmentation.
The RX path already has this guard (iwl_mld_rx_mpdu checks
in_hw_restart at rx.c:1906), and so does the TXQ allocation worker
(iwl_mld_add_txqs_wk at tx.c:156). Add the same guard to
iwl_mld_tx_from_txq() to stop all TX during firmware restart.
Frames left in mac80211's TXQs are naturally drained after restart
completes, when queue reallocation triggers iwl_mld_tx_from_txq()
via iwl_mld_add_txq_list(), or when new upper-layer traffic invokes
wake_tx_queue.
Tested on ASUS Zenbook 14 UX3405CA with Intel BE201 (Wi-Fi 7) on
kernel 6.19.5 where the firmware crashes approximately every 10-15
minutes under Tailscale traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Disable AVIC IPI virtualization on Hygon Family 18h (erratum #1235)
Hygon Family 18h CPUs are derived from AMD Family 17h (Zen1) silicon and
share the same erratum #1235: hardware may read a stale IsRunning=1 bit
during ICR write emulation and silently fail to generate an
AVIC_IPI_FAILURE_TARGET_NOT_RUNNING VM-Exit on the sending vCPU.
The absence of the VM-Exit causes KVM to miss the required wakeup of
blocking target vCPUs, leading to hung vCPUs and unbounded delays in
guest execution.
Extend the existing AMD Family 17h erratum #1235 workaround to also cover
Hygon Family 18h. With IPI virtualization disabled, KVM never sets
IsRunning=1 in the Physical ID table, so every non-self IPI generates a
VM-Exit and is correctly emulated. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix write streaming disablement if fd open O_RDWR
In netfs_perform_write(), "write streaming" (the caching of dirty data in
dirty but !uptodate folios) is performed to avoid the need to read data
that is just going to get immediately overwritten. However, this is/will
be disabled in three circumstances: if the fd is open O_RDWR, if fscache is
in use (as we need to round out the blocks for DIO) or if content
encryption is enabled (again for rounding out purposes).
The idea behind disabling it if the fd is open O_RDWR is that we'd need to
flush the write-streaming page before we could read the data, particularly
through mmap. But netfs now fills in the gaps if ->read_folio() is called
on the page, so that is unnecessary. Further, this doesn't actually work
if a separate fd is open for reading.
Fix this by removing the check for O_RDWR, thereby allowing streaming
writes even when we might read.
This caused a number of problems with the generic/522 xfstest, but those
are now fixed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix iommu_map_sgtable() return value check and avoid WARN
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
Store the return value in the appropriate type and in case of error,
return it rather than WARNing.
Patchwork: https://patchwork.freedesktop.org/patch/719685/ |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Handle unmap error when iommu_debug is enabled
Sashiko noticed a latent bug where the map error flow called iommu_unmap()
which calls iommu_debug_unmap_begin()/iommu_debug_unmap_end() however
since this is an error path the map flow never actually established the
original iommu_debug_map() it will malfunction.
Lift the unmap error handling into iommu_map_nosync() and reorder it so
the trace_map()/iommu_debug_map() records the partial mapping and then
immediately unmaps it. This avoid creating the unbalanced tracking and
provides saner tracing instead of a unmap unmatched to any map. |
| In the Linux kernel, the following vulnerability has been resolved:
iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap
Sashiko pointed out that the driver could drop PAGE_SIZE from the
pgsize_bitmap. That is technically allowed but nothing does it, and
such an iommu_domain would not be used with the DMA API today.
Still, it is against the design and it is trivial to fix up. Lift
the PT_WARN_ON to the if branch and just skip the fast path. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix error handling in pdsc_devcmd_wait
Fix two cases where pdsc_devcmd_wait() returns stale success from
the completion register instead of an error:
1. FW crash: If firmware stops running, the wait loop breaks early with
running=false. The condition "if ((!done || timeout) && running)" is
false, so error handling is bypassed and stale status is returned.
Check !running first and return -ENXIO.
2. Timeout: If a command times out, err is set to -ETIMEDOUT but then
overwritten by pdsc_err_to_errno(status) which reads stale status.
Return -ETIMEDOUT immediately after cleaning up.
Both errors now propagate to pdsc_devcmd_locked() which queues
health_work for recovery. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in compare_guid_key()
session_fd_check() walks the per-inode m_op_list during durable-handle
session teardown and sets op->conn = NULL for every opinfo whose conn
matched the closing session's connection. The matching opinfo, however,
stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list
because destroy_lease_table() only runs on full TCP-connection teardown,
not on SESSION_LOGOFF.
If the same TCP connection then negotiates a fresh session with the
same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and
is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a
lease context on a different inode, find_same_lease_key() walks
lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(),
which unconditionally dereferences opinfo->conn->ClientGUID. The conn
pointer is NULL and the kernel panics.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000069: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f]
Workqueue: ksmbd-io handle_ksmbd_work
RIP: 0010:bcmp+0x5b/0x230
Call Trace:
compare_guid_key+0x4b/0xd0
find_same_lease_key+0x324/0x690
smb2_open+0x6aea/0x8e60
handle_ksmbd_work+0x796/0xee0
...
Faulting address 0x348 is the offset of ClientGUID within struct
ksmbd_conn, confirming opinfo->conn was NULL.
Read opinfo->conn once and bail out if it has been cleared by a
concurrent session_fd_check(). A half-detached opinfo cannot be the
owner of an active lease, so returning 0 is the correct match result. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in proc_show_files()
When a SMB2 client opens a file with a durable v2 handle and then issues
SMB2 SESSION_LOGOFF, session_fd_check() clears fp->tcon = NULL on the
reconnectable file pointer but leaves the fp registered in global_ft.idr
until the durable scavenger fires (up to fp->durable_timeout seconds
later).
During that window any read of /proc/fs/ksmbd/files (mode 0400) panics
the kernel because proc_show_files() walks global_ft.idr and
unconditionally dereferences fp->tcon->id with no NULL guard.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:proc_show_files+0x118/0x740
Call Trace:
proc_show_files+0x118/0x740
seq_read_iter+0x4ef/0xe10
proc_reg_read_iter+0x1b7/0x280
...
Guard the dereference. A durable-disconnected fp legitimately has no
tcon; report its tree id as 0 rather than oopsing. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: require net admin for CIFS SWN netlink
CIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. The
intended sender is the cifs.witness helper, but the generic-netlink
operation currently has no capability flag, so any local process can send
RESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witness
handler.
The same family exposes CIFS_GENL_MCGRP_SWN without multicast-group
capability flags. Register messages sent to that group include the witness
registration id and, for NTLM-authenticated mounts, the username, domain,
and password attributes copied from the CIFS session. An unprivileged
local process should not be able to join that group and receive those
messages.
Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands with
GENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace for
joining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. The
cifs.witness service runs with the privileges needed for both operations. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Don't setup bogus iov_iter for silencing
At transition to the iov_iter for PCM data transfer, we blindly
applied the iov_iter setup also for silencing (i.e. data = NULL), and
it leads to a calculation of bogus iov_iter. Fortunately this didn't
cause troubles on most of architectures but it goes wrong on RISC-V
now, causing a NULL dereference.
Handle the NULL data case to treat the silencing in interleaved_copy()
for addressing the bug above. noninterleaved_copy() has already the
NULL data handling, so it doesn't need changes. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: asihpi: Fix potential OOB array access at reading cache
find_control() to retrieve a cached info accesses the array with the
given index blindly, which may lead to an OOB array access.
Add a sanity check for avoiding it. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate Add Extended Advertising Data length
MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command,
with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler
then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy
cp->data, but it never checks that those bytes are part of the mgmt
command payload.
A short command can therefore make add_ext_adv_data() pass an
out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond
the command buffer are addressable, they can also be copied into the
advertising instance as scan response data, where the caller can read
them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires
CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte
slab-out-of-bounds read.
Reject commands whose length does not match the fixed header plus both
advertising data lengths before parsing cp->data. |
