| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
staging: sm750fb: fix division by zero in ps_to_hz()
ps_to_hz() is called from hw_sm750_crtc_set_mode() without validating
that pixclock is non-zero. A zero pixclock passed via FBIOPUT_VSCREENINFO
causes a division by zero.
Fix by rejecting zero pixclock in lynxfb_ops_check_var(), consistent
with other framebuffer drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix device leak on probe failure
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
This driver takes a reference to the USB device during probe but does
not to release it on all probe errors (e.g. when descriptor parsing
fails).
Drop the redundant device reference to fix the leak, reduce cargo
culting, make it easier to spot drivers where an extra reference is
needed, and reduce the risk of further memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: udlfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO
Much like commit 19f953e74356 ("fbdev: fb_pm2fb: Avoid potential divide
by zero error"), we also need to prevent that same crash from happening
in the udlfb driver as it uses pixclock directly when dividing, which
will crash. |
| In the Linux kernel, the following vulnerability has been resolved:
usbip: validate number_of_packets in usbip_pack_ret_submit()
When a USB/IP client receives a RET_SUBMIT response,
usbip_pack_ret_submit() unconditionally overwrites
urb->number_of_packets from the network PDU. This value is
subsequently used as the loop bound in usbip_recv_iso() and
usbip_pad_iso() to iterate over urb->iso_frame_desc[], a flexible
array whose size was fixed at URB allocation time based on the
*original* number_of_packets from the CMD_SUBMIT.
A malicious USB/IP server can set number_of_packets in the response
to a value larger than what was originally submitted, causing a heap
out-of-bounds write when usbip_recv_iso() writes to
urb->iso_frame_desc[i] beyond the allocated region.
KASAN confirmed this with kernel 7.0.0-rc5:
BUG: KASAN: slab-out-of-bounds in usbip_recv_iso+0x46a/0x640
Write of size 4 at addr ffff888106351d40 by task vhci_rx/69
The buggy address is located 0 bytes to the right of
allocated 320-byte region [ffff888106351c00, ffff888106351d40)
The server side (stub_rx.c) and gadget side (vudc_rx.c) already
validate number_of_packets in the CMD_SUBMIT path since commits
c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle
malicious input") and b78d830f0049 ("usbip: fix vudc_rx: harden
CMD_SUBMIT path to handle malicious input"). The server side validates
against USBIP_MAX_ISO_PACKETS because no URB exists yet at that point.
On the client side we have the original URB, so we can use the tighter
bound: the response must not exceed the original number_of_packets.
This mirrors the existing validation of actual_length against
transfer_buffer_length in usbip_recv_xbuff(), which checks the
response value against the original allocation size.
Kelvin Mbogo's series ("usb: usbip: fix integer overflow in
usbip_recv_iso()", v2) hardens the receive-side functions themselves;
this patch complements that work by catching the bad value at its
source -- in usbip_pack_ret_submit() before the overwrite -- and
using the tighter per-URB allocation bound rather than the global
USBIP_MAX_ISO_PACKETS limit.
Fix this by checking rpdu->number_of_packets against
urb->number_of_packets in usbip_pack_ret_submit() before the
overwrite. On violation, clamp to zero so that usbip_recv_iso() and
usbip_pad_iso() safely return early. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: avoid double-free in smb_direct_free_sendmsg after smb_direct_flush_send_list()
smb_direct_flush_send_list() already calls smb_direct_free_sendmsg(),
so we should not call it again after post_sendmsg()
moved it to the batch list. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid double-free in smbd_free_send_io() after smbd_send_batch_flush()
smbd_send_batch_flush() already calls smbd_free_send_io(),
so we should not call it again after smbd_post_send()
moved it to the batch list. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
The GET_STATUS and SET/CLEAR_FEATURE handlers extract the endpoint
number from the host-supplied wIndex without any sort of validation.
Fix this up by validating the number of endpoints actually match up with
the number the device has before attempting to dereference a pointer
based on this math.
This is just like what was done in commit ee0d382feb44 ("usb: gadget:
aspeed_udc: validate endpoint index for ast udc") for the aspeed driver. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
The block_len read from the host-supplied NTB header is checked against
ntb_max but has no lower bound. When block_len is smaller than
opts->ndp_size, the bounds check of:
ndp_index > (block_len - opts->ndp_size)
will underflow producing a huge unsigned value that ndp_index can never
exceed, defeating the check entirely.
The same underflow occurs in the datagram index checks against block_len
- opts->dpe_size. With those checks neutered, a malicious USB host can
choose ndp_index and datagram offsets that point past the actual
transfer, and the skb_put_data() copies adjacent kernel memory into the
network skb.
Fix this by rejecting block lengths that cannot hold at least the NTB
header plus one NDP. This will make block_len - opts->ndp_size and
block_len - opts->dpe_size both well-defined.
Commit 8d2b1a1ec9f5 ("CDC-NCM: avoid overflow in sanity checking") fixed
a related class of issues on the host side of NCM. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: fireworks: bound device-supplied status before string array lookup
The status field in an EFW response is a 32-bit value supplied by the
firewire device. efr_status_names[] has 17 entries so a status value
outside that range goes off into the weeds when looking at the %s value.
Even worse, the status could return EFR_STATUS_INCOMPLETE which is
0x80000000, and is obviously not in that array of potential strings.
Fix this up by properly bounding the index against the array size and
printing "unknown" if it's not recognized. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: us144mkii: fix NULL deref on missing interface 0
A malicious USB device with the TASCAM US-144MKII device id can have a
configuration containing bInterfaceNumber=1 but no interface 0. USB
configuration descriptors are not required to assign interface numbers
sequentially, so usb_ifnum_to_if(dev, 0) returns will NULL, which will
then be dereferenced directly.
Fix this up by checking the return value properly. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: digital: Bounds check NFC-A cascade depth in SDD response handler
The NFC-A anti-collision cascade in digital_in_recv_sdd_res() appends 3
or 4 bytes to target->nfcid1 on each round, but the number of cascade
rounds is controlled entirely by the peer device. The peer sets the
cascade tag in the SDD_RES (deciding 3 vs 4 bytes) and the
cascade-incomplete bit in the SEL_RES (deciding whether another round
follows).
ISO 14443-3 limits NFC-A to three cascade levels and target->nfcid1 is
sized accordingly (NFC_NFCID1_MAXSIZE = 10), but nothing in the driver
actually enforces this. This means a malicious peer can keep the
cascade running, writing past the heap-allocated nfc_target with each
round.
Fix this by rejecting the response when the accumulated UID would exceed
the buffer.
Commit e329e71013c9 ("NFC: nci: Bounds check struct nfc_target arrays")
fixed similar missing checks against the same field on the NCI path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
A malicious USB device claiming to be a CDC Phonet modem can overflow
the skb_shared_info->frags[] array by sending an unbounded sequence of
full-page bulk transfers.
Drop the skb and increment the length error when the frag limit is
reached. This matches the same fix that commit f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") did for the
t7xx driver. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: fix NULL pointer dereference in alps_raw_event()
Commit ecfa6f34492c ("HID: Add HID_CLAIMED_INPUT guards in raw_event
callbacks missing them") attempted to fix up the HID drivers that had
missed the previous fix that was done in 2ff5baa9b527 ("HID: appleir:
Fix potential NULL dereference at raw event handle"), but the alps
driver was missed.
Fix this up by properly checking in the hid-alps driver that it had been
claimed correctly before attempting to process the raw event. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: initialize le_tmp64 in rtw_BIP_verify()
Initialize le_tmp64 to zero in rtw_BIP_verify() to prevent using
uninitialized data.
Smatch warns that only 6 bytes are copied to this 8-byte (u64)
variable, leaving the last two bytes uninitialized:
drivers/staging/rtl8723bs/core/rtw_security.c:1308 rtw_BIP_verify()
warn: not copying enough bytes for '&le_tmp64' (8 vs 6 bytes)
Initializing the variable at the start of the function fixes this
warning and ensures predictable behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: add missing return after LLCP_CLOSED checks
In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket
state is LLCP_CLOSED, the code correctly calls release_sock() and
nfc_llcp_sock_put() but fails to return. Execution falls through to
the remainder of the function, which calls release_sock() and
nfc_llcp_sock_put() again. This results in a double release_sock()
and a refcount underflow via double nfc_llcp_sock_put(), leading to
a use-after-free.
Add the missing return statements after the LLCP_CLOSED branches
in both functions to prevent the fall-through. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: proc: size address buffers for %pISpc output
The AF_RXRPC procfs helpers format local and remote socket addresses into
fixed 50-byte stack buffers with "%pISpc".
That is too small for the longest current-tree IPv6-with-port form the
formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a
dotted-quad tail not only for v4mapped addresses, but also for ISATAP
addresses via ipv6_addr_is_isatap().
As a result, a case such as
[ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535
is possible with the current formatter. That is 50 visible characters, so
51 bytes including the trailing NUL, which does not fit in the existing
char[50] buffers used by net/rxrpc/proc.c.
Size the buffers from the formatter's maximum textual form and switch the
call sites to scnprintf().
Changes since v1:
- correct the changelog to cite the actual maximum current-tree case
explicitly
- frame the proof around the ISATAP formatting path instead of the earlier
mapped-v4 example |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
Fix rxgk_do_verify_authenticator() to check the buffer size before checking
the nonce. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix integer overflow in rxgk_verify_response()
In rxgk_verify_response(), there's a potential integer overflow due to
rounding up token_len before checking it, thereby allowing the length check to
be bypassed.
Fix this by checking the unrounded value against len too (len is limited as
the response must fit in a single UDP packet). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix oversized RESPONSE authenticator length check
rxgk_verify_response() decodes auth_len from the packet and is supposed
to verify that it fits in the remaining bytes. The existing check is
inverted, so oversized RESPONSE authenticators are accepted and passed
to rxgk_decrypt_skb(), which can later reach skb_to_sgvec() with an
impossible length and hit BUG_ON(len).
Decoded from the original latest-net reproduction logs with
scripts/decode_stacktrace.sh:
RIP: __skb_to_sgvec()
[net/core/skbuff.c:5285 (discriminator 1)]
Call Trace:
skb_to_sgvec() [net/core/skbuff.c:5305]
rxgk_decrypt_skb() [net/rxrpc/rxgk_common.h:81]
rxgk_verify_response() [net/rxrpc/rxgk.c:1268]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
process_one_work() [kernel/workqueue.c:3281]
worker_thread()
[kernel/workqueue.c:3353 kernel/workqueue.c:3440]
kthread() [kernel/kthread.c:436]
ret_from_fork() [arch/x86/kernel/process.c:164]
Reject authenticator lengths that exceed the remaining packet payload. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: reject undecryptable rxkad response tickets
rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then
parses the buffer as plaintext without checking whether
crypto_skcipher_decrypt() succeeded.
A malformed RESPONSE can therefore use a non-block-aligned ticket
length, make the decrypt operation fail, and still drive the ticket
parser with attacker-controlled bytes.
Check the decrypt result and abort the connection with RXKADBADTICKET
when ticket decryption fails. |
