| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Fix deadlock if uvc_status_stop is called from async_ctrl.work
If a UVC camera has an asynchronous control, uvc_status_stop may be
called from async_ctrl.work:
uvc_ctrl_status_event_work()
uvc_ctrl_status_event()
uvc_ctrl_clear_handle()
uvc_pm_put()
uvc_status_put()
uvc_status_stop()
cancel_work_sync()
This will cause a deadlock, since cancel_work_sync will wait for
uvc_ctrl_status_event_work to complete before returning.
Fix this by returning early from uvc_status_stop if we are currently in
the work function. flush_status now remains false until uvc_status_start
is called again, ensuring that uvc_ctrl_status_event_work won't resubmit
the URB. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: bound DMA command body size against suffix pointer
vmw_cmd_dma() locates the DMA suffix at
(unsigned long) &cmd->body + header->size - sizeof(*suffix)
without checking that header->size is large enough to contain both
cmd->body and the suffix. An undersized header makes the suffix
pointer underflow back into the previous command in the bounce
buffer. The verifier later writes suffix->maximumOffset, clobbering
verified fields of an already-relocated earlier command -- a TOCTOU
on the device-visible command stream that lets one command rewrite
another's GMR id, surface id, or other authenticated fields.
Reject the command if the body is too small for the suffix to fit. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: hold event_mutex while checkpointing CRIU events
kfd_criu_checkpoint_events() counts the entries in p->event_idr via
kfd_get_num_events(), allocates an array sized to that count, and then
walks the same IDR to fill it. Neither the count nor the walk holds
p->event_mutex.
The CRIU checkpoint caller holds only p->mutex. Event create and destroy
(kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not
take p->mutex, so a second thread in the same process can insert or remove
events between the count and the walk. If an event is inserted, the walk
iterates more entries than were counted and writes past the end of the
ev_privs allocation; if an event is removed, the walk dereferences an
entry that is being freed.
Hold p->event_mutex across the count and the walk so both observe a
consistent view of p->event_idr. The lock is released before
copy_to_user(), which only touches the local buffer. The caller already
holds p->mutex and the create/destroy paths never take p->mutex, so the
p->mutex -> p->event_mutex order is not inverted and no deadlock is
introduced.
(cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix uint32_t overflow in EOP ring buffer size alignment
eop_ring_buffer_size in struct queue_properties is a u32. In
kfd_queue_acquire_buffers() the expected EOP buffer size is computed as
ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the
addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to
0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on
size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD
cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB
BO, so CP EOP writes can land past the buffer and fault the GPU.
Cast the operand to u64 so the alignment is computed in 64-bit; the size
check in kfd_queue_buffer_get() then rejects the oversized request.
(cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix QID bit leak in pqm_create_queue()
When MES is enabled and amdgpu_amdkfd_alloc_kernel_mem() fails during
the first queue creation for a process, pqm_create_queue() returns
early via 'return retval' without going through the err_create_queue
cleanup label.
This means clear_bit(*qid, pqm->queue_slot_bitmap) is never called,
leaving the reserved QID bit permanently set in queue_slot_bitmap.
Over time this leaks QID slots, potentially exhausting all available
queue slots.
Fix this by replacing 'return retval' with 'goto err_allocate_pqn'
so that clear_bit() is always called on the error path without
touching the uninitialized pqn pointer.
AILIKFD-813
(cherry picked from commit a107f74c38edbb80d6ab64dcaeeb292c14e9779f) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport
If a plane reaches calculate_mcache_setting with a zero-area viewport,
calculate_mcache_setting exits early with num_mcaches == 0 and
mvmpg_width/height == 0. This will cause a divide-by-zero panic and can
also cause an underflow on num_mcaches.
Fix this by changing calculate_mcache_setting to bool and adding guards
after each calculate_mcache_row_bytes call. If num_mcaches or
mvmpg_width/height is zero, return a false. Callers will propagate the
failure as a rejected mode, which prevents the panic.
(cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size
vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB
binner BO, but writes the size of the whole BO to BPOS. On every binner
out-of-memory event the PTB is therefore authorized to write tile lists
across all the other slots (which may hold the tile state, tile alloc and
overflow memory of in-flight jobs) and, for any slot but the first, past
the end of the binner BO into unrelated CMA memory.
Since CMA pages are recycled into page cache and user allocations, this
is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU
hangs with corrupted control list pointers, userspace heap corruption, a
GPU that stays permanently wedged after the first hang, and occasional
full system crashes, whenever a job overflows the initial binner slot.
The bug dates back to the conversion from a dedicated overflow BO (where
writing the full BO size was correct) to the slotted binner BO. |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error
In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc()
and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also
frees the transfer buffer.
If usb_submit_urb() fails, the error path frees the buffer explicitly with
kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set,
usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double
free of the transfer buffer.
BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0
Free of addr ffff8881069ccb80 by task trigger.sh/285
Call Trace:
kfree+0x113/0x3c0
usb_free_urb.part.0+0x91/0xb0
Drop the redundant kfree(buf); usb_free_urb() already releases the transfer
buffer. This mirrors commit 03819abbeb11 ("net: usb: lan78xx: Fix double free
issue with interrupt buffer allocation"). |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix socket use-after-free during link group termination
__smc_lgr_terminate() drops conns_lock after finding a connection in
lgr->conns_all, but before taking a reference on its socket. The connection
is embedded in the socket, and its registration reference protects it only
while the connection remains in the tree.
A concurrent close can unregister the connection and drop that reference,
freeing the socket before the termination worker reaches sock_hold().
The race is reachable when close overlaps link group termination.
Local stress testing reproduced the use-after-free and KASAN reported:
BUG: KASAN: slab-use-after-free in __smc_lgr_terminate.part.0 [smc]
Write of size 4 by task kworker/3:3
Workqueue: events smc_lgr_terminate_work [smc]
__smc_lgr_terminate.part.0 [smc]
The socket was allocated by smc_create(), freed through
slab_free_after_rcu_debug(), and was followed by:
refcount_t: addition on 0; use-after-free.
__smc_lgr_terminate.part.0 [smc]
Take the socket reference while conns_lock still protects the tree entry.
The unregister path then cannot drop the last reference until termination
has finished using the socket. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject repeated SMB2 NEGOTIATE requests
Unauthenticated client can send multiple successful SMB2 NEGOTIATE
requests on one connection before SESSION_SETUP. While the connection is
in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another
SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation.
Only the final allocation is freed when the connection is released, leaking
one object for every additional successful request.
A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol
violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect
without replying in this case. Set the connection exiting when rejecting
the request, in addition to suppressing the response.
Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the
SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize
both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they
update connection-wide dialect and negotiation state.
Move the locking contract to ksmbd_smb_negotiate_common(), where the state
and dialect are selected, and add ksmbd_conn_new() for consistent state
access. |
| In the Linux kernel, the following vulnerability has been resolved:
igbvf: Fix leak in TX DMA error cleanup
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented before each frag mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping (the head) would leak.
This bug was introduced by a 2010 fix for an endless loop in dma_error.
All other affected drivers have already been fixed. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set
When a USB audio endpoint requests full packet transfers via the fill_max
descriptor flag, data_ep_set_params() promotes ep->curpacksize to
ep->maxpacksize. However, maxsize is left at the original sample-rate
derived value.
Since u->buffer_size is allocated as maxsize * packets, the resulting
DMA buffer is far too small for the requested transfer length. When the
USB host controller streams up to curpacksize bytes per packet, it writes
past the end of the buffer via DMA, corrupting kernel heap memory.
Update maxsize to curpacksize when fill_max is set so that the allocated
DMA buffer size matches the actual transfer request size.
[ changed to reassign maxsize only when ep->fill_max is set -- tiwai ] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero
hci_conn::iso_data is accessed and modified without lock or RCU.
This leads to a race
[Task hdev->workqueue] [Task 2]
iso_recv iso_conn_put(conn)
conn = LOAD hcon->iso_data iso_conn_free(conn)
iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL
kfree(conn)
kref_get_unless_zero(&conn->ref) /* UAF */
and also to races in iso_conn_add() vs. iso_conn_free().
Fix by adding spinlock hci_conn::proto_lock and using it to guard
hci_conn::iso_data. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix refcounting of iso_conn
iso_conn_del() and iso_chan_del() have a race that results to double-put
of iso_conn:
[Task hdev->workqueue] [Task 2]
iso_conn_del iso_chan_del
iso_conn_hold_unless_zero iso_conn_lock
iso_conn_lock conn->sk = NULL
iso_conn_unlock
sk = iso_sock_hold(conn) <---------ยด
if (!sk) iso_conn_put iso_conn_put
iso_conn_put /* UAF */
The extra put for !sk in iso_conn_del() is currently required since
failing iso_chan_add() may leave iso_conn not associated with any sk.
Fix by having iso_pi(sk)->conn own refcount when non-NULL, so
iso_conn_del does not need to put it. Adjust the iso_conn_add()
refcounting so that conn is put if it does not get associated with an
sk. |
| A vulnerability was found in VictoriaMetrics up to 1.146.0. Impacted is the function requestHandler of the file app/vmauth/main.go of the component VMAuth Authentication Endpoint. Performing a manipulation results in improper restriction of excessive authentication attempts. The attack is possible to be carried out remotely. The complexity of an attack is rather high. The exploitability is considered difficult. The exploit has been made public and could be used. Upgrading to version 1.147.0 is recommended to address this issue. The patch is named 119ba0fb5be8024d50c5ba946599b2e69e8803ea. Upgrading the affected component is recommended. |
| In the Linux kernel, the following vulnerability has been resolved:
can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure
es58x_read_bulk_callback() resubmits the RX URB after processing a received
packet. If the resubmit succeeds, the URB remains anchored and will be
handled by the normal RX path or by teardown.
However, if usb_submit_urb() fails, the callback unanchors the URB and then
returns directly. This skips the existing free_urb path, so the coherent
transfer buffer allocated with usb_alloc_coherent() is not released.
Reuse the existing free_urb path after a resubmit failure so that the RX
coherent buffer is freed before leaving the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock
Fix a severe AB/BA deadlock between the Common Clock Framework (CCF)
and the I2C adapter lock, which triggers when an I2C-controlled clock
generator client (like the Si5351) is registered or modified under the CCF.
During an i2c client clock (generator) frequency change, the CCF acquires its global
'prepare_lock' mutex and the driver calls i2c_transfer() to update the client's
chip registers, stalling for the adapter's I2C bus lock.
Concurrently, an independent, parallel transfer on the same bus (e.g., a GPIO
expander handling LEDs) can hold the I2C adapter lock. Inside this parallel
transfer path, jz4780_i2c_set_speed() calls clk_get_rate() on the host
controller's input clock to calculate bus timings. This call attempts to acquire
the blocked CCF 'prepare_lock', creating a circular dependency that freezes
the system.
The jz4780 host controller clock itself is static and never changes at runtime.
However, calling clk_get_rate() inside the active transfer path introduces
an unnecessary dependency on the CCF internal locks.
Eliminate this synchronous clk_get_rate() call from the active transfer
path by caching the static host peripheral clock rate once - inside the private
jz4780_i2c structure during jz4780_i2c_probe(). Update jz4780_i2c_set_speed()
to use this cached value, safely decoupling active I2C transactions from the
CCF internal locks without any risk of stale timings.
Assisted-by web based Google AI (pinpointing the bug and writing the message). |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: use pskb_network_may_pull() in route_shortcircuit()
route_shortcircuit() currently calls pskb_may_pull(skb, sizeof(struct iphdr))
(or ipv6hdr), which checks if bytes are available starting from skb->data.
However, in vxlan_xmit(), skb->data points to the MAC header, so
skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, 20)
only checks 20 bytes from skb->data (which is 14 bytes MAC header + 6 bytes of
IP header), leaving the rest of the IP header potentially un-pulled in non-linear
frags. Subsequent dereferences of ip_hdr(skb)->daddr can read beyond the pulled
linear buffer length.
Fix this by using pskb_network_may_pull(), which adds skb_network_offset(skb) to
the length check to ensure the full network header is present in the linear buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes: Fix NULL pointer dereference in hprobe_expire()
Forking a task that has a pending uretprobe can oops the kernel with a
NULL pointer dereference in the clone() path:
BUG: kernel NULL pointer dereference, address: 0000000000000018
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:hprobe_expire
CR2: 0000000000000018
Call Trace:
uprobe_copy_process
copy_process
kernel_clone
__x64_sys_clone
do_syscall_64
entry_SYSCALL_64_after_hwframe
This was found on real hosts on Meta fleet.
I've got the impression that this is what is happening:
CPU 1 CPU 2 (traced task)
----- -------------------
hit uprobe, prepare_uretprobe():
hprobe LEASED, refcount >= 1
uprobe_unregister()
put_uprobe(): refcount -> 0
fork() -> dup_utask()
hprobe_expire(hprobe, true)
try_get_uprobe() -> NULL
get_uprobe(NULL) <-- Oops
Only take the extra reference when the uprobe is non-NULL; a NULL means
it is gone and is the correct value to return. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: stop fast-leave after deleting a port group
br_multicast_leave_group() iterates mp->ports with pp = &p->next in
its fast-leave path. After br_multicast_del_pg() removes p,
continuing the loop advances pp through the deleted entry.
If multicast-to-unicast was enabled, the bridge can hold multiple port
groups for the same port and group with different source MAC
addresses. Once multicast-to-unicast is disabled,
br_port_group_equal() matches those entries by port only. A fast leave
can then delete one entry and continue from its stale next pointer,
leaving mp->ports pointing at a deleted port group.
Fast leave only needs to remove one matching port group. Break after
br_multicast_del_pg() so the loop stops before dereferencing the
removed entry. |
