| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Unified Threat Defense (UTD) configuration CLI of Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary commands as root on the underlying host operating system. To exploit this vulnerability, an attacker must have level 15 privileges on the affected device.
This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by submitting a crafted CLI command to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as root on the underlying operating system. |
| A vulnerability in auxiliary asynchronous port (AUX) functions of Cisco IOS XE Software could allow an authenticated, local attacker to cause an affected device to reload or stop responding.
This vulnerability is due to the incorrect handling of specific ingress traffic when flow control hardware is enabled on the AUX port. An attacker could exploit this vulnerability by reverse telnetting to the AUX port and sending specific data after connecting. A successful exploit could allow the attacker to cause the device to reset or stop responding, resulting in a denial of service (DoS) condition. |
| A vulnerability in the Locator ID Separation Protocol (LISP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload.
This vulnerability is due to the incorrect handling of LISP packets. An attacker could exploit this vulnerability by sending a crafted LISP packet to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.
Note: This vulnerability could be exploited over either IPv4 or IPv6 transport. |
| A vulnerability in the IPv4 Software-Defined Access (SD-Access) fabric edge node feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause high CPU utilization and stop all traffic processing, resulting in a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of certain IPv4 packets. An attacker could exploit this vulnerability by sending certain IPv4 packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition. |
| A vulnerability in the data model interface (DMI) services of Cisco IOS XE Software could allow an unauthenticated, remote attacker to access resources that should have been protected by a configured IPv4 access control list (ACL).
This vulnerability is due to improper handling of error conditions when a successfully authorized device administrator updates an IPv4 ACL using the NETCONF or RESTCONF protocol, and the update would reorder access control entries (ACEs) in the updated ACL. An attacker could exploit this vulnerability by accessing resources that should have been protected across an affected device. |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, low-privileged, local attacker to access WLAN configuration details including passwords.
This vulnerability is due to improper privilege checks. An attacker could exploit this vulnerability by using the show and show tech wireless CLI commands to access configuration details, including passwords. A successful exploit could allow the attacker to access configuration details that they are not authorized to access. |
| A vulnerability in the IKEv1 fragmentation code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a heap overflow, resulting in an affected device reloading.
This vulnerability exists because crafted, fragmented IKEv1 packets are not properly reassembled. An attacker could exploit this vulnerability by sending crafted UDP packets to an affected system. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
Note: Only traffic that is directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered by IPv4 and IPv6 traffic. |
| A vulnerability in the Internet Key Exchange version 1 (IKEv1) implementation of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The attacker must have valid IKEv1 VPN credentials to exploit this vulnerability.
This vulnerability is due to improper validation of IKEv1 phase 2 parameters before the IPsec security association creation request is handed off to the hardware cryptographic accelerator of an affected device. An attacker could exploit this vulnerability by sending crafted IKEv1 messages to the affected device. A successful exploit could allow the attacker to cause the device to reload. |
| A vulnerability in the Layer 2 Ethernet services of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the line card network processor to reset, resulting in a denial of service (DoS) condition.
This vulnerability is due to the incorrect handling of specific Ethernet frames that are received on line cards that have the Layer 2 services feature enabled. An attacker could exploit this vulnerability by sending specific Ethernet frames through an affected device. A successful exploit could allow the attacker to cause the ingress interface network processor to reset, resulting in a loss of traffic over the interfaces that are supported by the network processor. Multiple resets of the network processor would cause the line card to reset, resulting in a DoS condition. |
| A vulnerability in the Secure Copy Protocol (SCP) and SFTP feature of Cisco IOS XR Software could allow an authenticated, local attacker to create or overwrite files in a system directory, which could lead to a denial of service (DoS) condition. The attacker would require valid user credentials to perform this attack.
This vulnerability is due to a lack of proper validation of SCP and SFTP CLI input parameters. An attacker could exploit this vulnerability by authenticating to the device and issuing SCP or SFTP CLI commands with specific parameters. A successful exploit could allow the attacker to impact the functionality of the device, which could lead to a DoS condition. The device may need to be manually rebooted to recover.
Note: This vulnerability is exploitable only when a local user invokes SCP or SFTP commands at the Cisco IOS XR CLI. A local user with administrative privileges could exploit this vulnerability remotely. |
| A vulnerability in the DHCP version 4 (DHCPv4) server feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to trigger a crash of the dhcpd process, resulting in a denial of service (DoS) condition.
This vulnerability exists because certain DHCPv4 messages are improperly validated when they are processed by an affected device. An attacker could exploit this vulnerability by sending a malformed DHCPv4 message to an affected device. A successful exploit could allow the attacker to cause a crash of the dhcpd process. While the dhcpd process is restarting, which may take approximately two minutes, DHCPv4 server services are unavailable on the affected device. This could temporarily prevent network access to clients that join the network during that time period and rely on the DHCPv4 server of the affected device.
Notes:
Only the dhcpd process crashes and eventually restarts automatically. The router does not reload.
This vulnerability only applies to DHCPv4. DHCP version 6 (DHCPv6) is not affected. |
| A vulnerability in the DHCP snooping security feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a full interface queue wedge, which could result in a denial of service (DoS) condition.
This vulnerability is due to improper handling of DHCP request packets. An attacker could exploit this vulnerability by sending DHCP request packets to an affected device. A successful exploit could allow the attacker to cause packets to wedge in the queue, creating a DoS condition for downstream devices of the affected system and requiring that the system restart to drain the queue.
Note: This vulnerability can be exploited with either unicast or broadcast DHCP packets on a VLAN that does not have DHCP snooping enabled. |
| A vulnerability in the web-based management interface of Cisco IOS XE Software could allow an authenticated, low-privileged, remote attacker to perform an injection attack against an affected device.r
This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web-based management interface. A successful exploit could allow the attacker to read files from the underlying operating system. |
| A vulnerability in the web-based management interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform a CSRF attack and execute commands on the CLI of an affected device.
This vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading an already authenticated user to follow a crafted link. A successful exploit could allow the attacker to clear the syslog, parser, and licensing logs on the affected device if the targeted user has privileges to clear those logs. |
| A vulnerability in the Cisco IOx application hosting environment of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the Cisco IOx application hosting environment to stop responding, resulting in a denial of service (DoS) condition.
This vulnerability is due to the improper handling of HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to cause the Cisco IOx application hosting environment to stop responding. The IOx process will need to be manually restarted to recover services. |
| A vulnerability in the packet filtering features of Cisco IOS XE SD-WAN Software could allow an unauthenticated, remote attacker to bypass Layer 3 and Layer 4 traffic filters.
This vulnerability is due to improper traffic filtering conditions on an affected device. An attacker could exploit this vulnerability by sending a crafted packet to the affected device. A successful exploit could allow the attacker to bypass the Layer 3 and Layer 4 traffic filters and inject a crafted packet into the network. |
| A vulnerability in Cisco IOS XE Wireless Controller Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to insufficient input validation of access point (AP) Cisco Discovery Protocol (CDP) neighbor reports when they are processed by the wireless controller. An attacker could exploit this vulnerability by sending a crafted CDP packet to an AP. A successful exploit could allow the attacker to cause an unexpected reload of the wireless controller that is managing the AP, resulting in a DoS condition that affects the wireless network. |
| A vulnerability in the UDP forwarding code of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to bypass configured management plane protection policies and access the Simple Network Management Plane (SNMP) server of an affected device.
This vulnerability is due to incorrect UDP forwarding programming when using SNMP with management plane protection. An attacker could exploit this vulnerability by attempting to perform an SNMP operation using broadcast as the destination address that could be processed by an affected device that is configured with an SNMP server. A successful exploit could allow the attacker to communicate to the device on the configured SNMP ports. Although an unauthenticated attacker could send UDP datagrams to the configured SNMP port, only an authenticated user can retrieve or modify data using SNMP requests. |
| A vulnerability in the SNMP subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause a DoS condition on an affected device.
This vulnerability is due to improper error handling when parsing SNMP requests. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMP v2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMP v3, the attacker must have valid SNMP user credentials for the affected system. |
| A vulnerability in the SNMP subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause a DoS condition on an affected device.
This vulnerability is due to improper error handling when parsing SNMP requests. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMP v2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMP v3, the attacker must have valid SNMP user credentials for the affected system. |
