Filtered by vendor Linux
Subscriptions
Total
12669 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-43035 | 3 Ibm, Linux, Microsoft | 6 Aix, Control Center, Linux On Ibm Z and 3 more | 2025-08-17 | 4 Medium |
| IBM Sterling Control Center 6.2.1, 6.3.1, and 6.4.0 allows web pages to be stored locally which can be read by another user on the system. | ||||
| CVE-2023-43039 | 3 Ibm, Linux, Microsoft | 3 Openpages With Watson, Linux Kernel, Windows | 2025-08-17 | 6.1 Medium |
| IBM OpenPages with Watson 9.0 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session | ||||
| CVE-2023-33861 | 2 Ibm, Linux | 2 Security Qradar Edr, Linux Kernel | 2025-08-16 | 6.5 Medium |
| IBM Security ReaQta EDR 3.12 could allow an attacker to spoof a trusted entity by interfering with the communication path between the host and client. | ||||
| CVE-2025-38407 | 1 Linux | 1 Linux Kernel | 2025-08-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: cpu_ops_sbi: Use static array for boot_data Since commit 6b9f29b81b15 ("riscv: Enable pcpu page first chunk allocator"), if NUMA is enabled, the page percpu allocator may be used on very sparse configurations, or when requested on boot with percpu_alloc=page. In that case, percpu data gets put in the vmalloc area. However, sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data, and simply assumes that __pa() would work. This causes the just started hart to immediately access an invalid address and hang. Fortunately, struct sbi_hart_boot_data is not too large, so we can simply allocate an array for boot_data statically, putting it in the kernel image. This fixes NUMA=y SMP boot on Sophgo SG2042. To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then run with: qemu-system-riscv64 -M virt -smp 2 -nographic \ -kernel arch/riscv/boot/Image \ -append "percpu_alloc=page" Kernel output: [ 0.000000] Booting Linux on hartid 0 [ 0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025 ... [ 0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712 ... [ 0.083192] smp: Bringing up secondary CPUs ... [ 0.086722] ------------[ cut here ]------------ [ 0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080) [ 0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8 [ 0.088376] Modules linked in: [ 0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE [ 0.088833] Hardware name: riscv-virtio,qemu (DT) [ 0.088948] epc : __virt_to_phys+0xae/0xe8 [ 0.089001] ra : __virt_to_phys+0xae/0xe8 [ 0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0 [ 0.089057] gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976 [ 0.089076] t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0 [ 0.089095] s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000 [ 0.089113] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.089131] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.089155] s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001 [ 0.089174] s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec [ 0.089193] s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000 [ 0.089211] s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7 [ 0.089960] t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8 [ 0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003 [ 0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8 [ 0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8 [ 0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c [ 0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258 [ 0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c [ 0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc [ 0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244 [ 0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90 [ 0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118 [ 0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8 [ 0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4 [ 0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c [ 0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0 [ 0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18 [ 0.090560] ---[ end trace 0000000000000000 ]--- [ 1.179875] CPU1: failed to come online [ 1.190324] smp: Brought up 1 node, 1 CPU | ||||
| CVE-2024-21803 | 1 Linux | 1 Linux Kernel | 2025-08-15 | 3.5 Low |
| Use After Free vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (bluetooth modules) allows Local Execution of Code. This vulnerability is associated with program files https://gitee.Com/anolis/cloud-kernel/blob/devel-5.10/net/bluetooth/af_bluetooth.C. This issue affects Linux kernel: from v2.6.12-rc2 before v6.8-rc1. | ||||
| CVE-2025-38500 | 1 Linux | 1 Linux Kernel | 2025-08-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: interface: fix use-after-free after changing collect_md xfrm interface collect_md property on xfrm interfaces can only be set on device creation, thus xfrmi_changelink() should fail when called on such interfaces. The check to enforce this was done only in the case where the xi was returned from xfrmi_locate() which doesn't look for the collect_md interface, and thus the validation was never reached. Calling changelink would thus errornously place the special interface xi in the xfrmi_net->xfrmi hash, but since it also exists in the xfrmi_net->collect_md_xfrmi pointer it would lead to a double free when the net namespace was taken down [1]. Change the check to use the xi from netdev_priv which is available earlier in the function to prevent changes in xfrm collect_md interfaces. [1] resulting oops: [ 8.516540] kernel BUG at net/core/dev.c:12029! [ 8.516552] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 8.516559] CPU: 0 UID: 0 PID: 12 Comm: kworker/u80:0 Not tainted 6.15.0-virtme #5 PREEMPT(voluntary) [ 8.516565] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 8.516569] Workqueue: netns cleanup_net [ 8.516579] RIP: 0010:unregister_netdevice_many_notify+0x101/0xab0 [ 8.516590] Code: 90 0f 0b 90 48 8b b0 78 01 00 00 48 8b 90 80 01 00 00 48 89 56 08 48 89 32 4c 89 80 78 01 00 00 48 89 b8 80 01 00 00 eb ac 90 <0f> 0b 48 8b 45 00 4c 8d a0 88 fe ff ff 48 39 c5 74 5c 41 80 bc 24 [ 8.516593] RSP: 0018:ffffa93b8006bd30 EFLAGS: 00010206 [ 8.516598] RAX: ffff98fe4226e000 RBX: ffffa93b8006bd58 RCX: ffffa93b8006bc60 [ 8.516601] RDX: 0000000000000004 RSI: 0000000000000000 RDI: dead000000000122 [ 8.516603] RBP: ffffa93b8006bdd8 R08: dead000000000100 R09: ffff98fe4133c100 [ 8.516605] R10: 0000000000000000 R11: 00000000000003d2 R12: ffffa93b8006be00 [ 8.516608] R13: ffffffff96c1a510 R14: ffffffff96c1a510 R15: ffffa93b8006be00 [ 8.516615] FS: 0000000000000000(0000) GS:ffff98fee73b7000(0000) knlGS:0000000000000000 [ 8.516619] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.516622] CR2: 00007fcd2abd0700 CR3: 000000003aa40000 CR4: 0000000000752ef0 [ 8.516625] PKRU: 55555554 [ 8.516627] Call Trace: [ 8.516632] <TASK> [ 8.516635] ? rtnl_is_locked+0x15/0x20 [ 8.516641] ? unregister_netdevice_queue+0x29/0xf0 [ 8.516650] ops_undo_list+0x1f2/0x220 [ 8.516659] cleanup_net+0x1ad/0x2e0 [ 8.516664] process_one_work+0x160/0x380 [ 8.516673] worker_thread+0x2aa/0x3c0 [ 8.516679] ? __pfx_worker_thread+0x10/0x10 [ 8.516686] kthread+0xfb/0x200 [ 8.516690] ? __pfx_kthread+0x10/0x10 [ 8.516693] ? __pfx_kthread+0x10/0x10 [ 8.516697] ret_from_fork+0x82/0xf0 [ 8.516705] ? __pfx_kthread+0x10/0x10 [ 8.516709] ret_from_fork_asm+0x1a/0x30 [ 8.516718] </TASK> | ||||
| CVE-2025-38335 | 1 Linux | 1 Linux Kernel | 2025-08-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT When enabling PREEMPT_RT, the gpio_keys_irq_timer() callback runs in hard irq context, but the input_event() takes a spin_lock, which isn't allowed there as it is converted to a rt_spin_lock(). [ 4054.289999] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 4054.290028] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/0 ... [ 4054.290195] __might_resched+0x13c/0x1f4 [ 4054.290209] rt_spin_lock+0x54/0x11c [ 4054.290219] input_event+0x48/0x80 [ 4054.290230] gpio_keys_irq_timer+0x4c/0x78 [ 4054.290243] __hrtimer_run_queues+0x1a4/0x438 [ 4054.290257] hrtimer_interrupt+0xe4/0x240 [ 4054.290269] arch_timer_handler_phys+0x2c/0x44 [ 4054.290283] handle_percpu_devid_irq+0x8c/0x14c [ 4054.290297] handle_irq_desc+0x40/0x58 [ 4054.290307] generic_handle_domain_irq+0x1c/0x28 [ 4054.290316] gic_handle_irq+0x44/0xcc Considering the gpio_keys_irq_isr() can run in any context, e.g. it can be threaded, it seems there's no point in requesting the timer isr to run in hard irq context. Relax the hrtimer not to use the hard context. | ||||
| CVE-2025-37925 | 1 Linux | 1 Linux Kernel | 2025-08-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jfs: reject on-disk inodes of an unsupported type Syzbot has reported the following BUG: kernel BUG at fs/inode.c:668! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 UID: 0 PID: 139 Comm: jfsCommit Not tainted 6.12.0-rc4-syzkaller-00085-g4e46774408d9 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 RIP: 0010:clear_inode+0x168/0x190 Code: 4c 89 f7 e8 ba fe e5 ff e9 61 ff ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 7c c1 4c 89 f7 e8 90 ff e5 ff eb b7 0b e8 01 5d 7f ff 90 0f 0b e8 f9 5c 7f ff 90 0f 0b e8 f1 5c 7f RSP: 0018:ffffc900027dfae8 EFLAGS: 00010093 RAX: ffffffff82157a87 RBX: 0000000000000001 RCX: ffff888104d4b980 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffffc900027dfc90 R08: ffffffff82157977 R09: fffff520004fbf38 R10: dffffc0000000000 R11: fffff520004fbf38 R12: dffffc0000000000 R13: ffff88811315bc00 R14: ffff88811315bda8 R15: ffff88811315bb80 FS: 0000000000000000(0000) GS:ffff888135f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005565222e0578 CR3: 0000000026ef0000 CR4: 00000000000006f0 Call Trace: <TASK> ? __die_body+0x5f/0xb0 ? die+0x9e/0xc0 ? do_trap+0x15a/0x3a0 ? clear_inode+0x168/0x190 ? do_error_trap+0x1dc/0x2c0 ? clear_inode+0x168/0x190 ? __pfx_do_error_trap+0x10/0x10 ? report_bug+0x3cd/0x500 ? handle_invalid_op+0x34/0x40 ? clear_inode+0x168/0x190 ? exc_invalid_op+0x38/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? clear_inode+0x57/0x190 ? clear_inode+0x167/0x190 ? clear_inode+0x168/0x190 ? clear_inode+0x167/0x190 jfs_evict_inode+0xb5/0x440 ? __pfx_jfs_evict_inode+0x10/0x10 evict+0x4ea/0x9b0 ? __pfx_evict+0x10/0x10 ? iput+0x713/0xa50 txUpdateMap+0x931/0xb10 ? __pfx_txUpdateMap+0x10/0x10 jfs_lazycommit+0x49a/0xb80 ? _raw_spin_unlock_irqrestore+0x8f/0x140 ? lockdep_hardirqs_on+0x99/0x150 ? __pfx_jfs_lazycommit+0x10/0x10 ? __pfx_default_wake_function+0x10/0x10 ? __kthread_parkme+0x169/0x1d0 ? __pfx_jfs_lazycommit+0x10/0x10 kthread+0x2f2/0x390 ? __pfx_jfs_lazycommit+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x4d/0x80 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> This happens when 'clear_inode()' makes an attempt to finalize an underlying JFS inode of unknown type. According to JFS layout description from https://jfs.sourceforge.net/project/pub/jfslayout.pdf, inode types from 5 to 15 are reserved for future extensions and should not be encountered on a valid filesystem. So add an extra check for valid inode type in 'copy_from_dinode()'. | ||||
| CVE-2022-43850 | 3 Ibm, Linux, Microsoft | 3 Aspera Console, Linux Kernel, Windows | 2025-08-15 | 5.4 Medium |
| IBM Aspera Console 3.4.0 through 3.4.4 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. | ||||
| CVE-2022-43847 | 3 Ibm, Linux, Microsoft | 3 Aspera Console, Linux Kernel, Windows | 2025-08-15 | 5.4 Medium |
| IBM Aspera Console 3.4.0 through 3.4.4 is vulnerable to HTTP header injection, caused by improper validation of input by the HOST headers. This could allow an attacker to conduct various attacks against the vulnerable system, including cross-site scripting, cache poisoning or session hijacking. | ||||
| CVE-2022-43851 | 3 Ibm, Linux, Microsoft | 3 Aspera Console, Linux Kernel, Windows | 2025-08-15 | 5.9 Medium |
| IBM Aspera Console 3.4.0 through 3.4.4 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. | ||||
| CVE-2022-43852 | 3 Ibm, Linux, Microsoft | 3 Aspera Console, Linux Kernel, Windows | 2025-08-15 | 5.3 Medium |
| IBM Aspera Console 3.4.0 through 3.4.4 could disclose sensitive information in HTTP headers that could be used in further attacks against the system. | ||||
| CVE-2024-49355 | 3 Ibm, Linux, Microsoft | 3 Openpages With Watson, Linux Kernel, Windows | 2025-08-15 | 5.3 Medium |
| IBM OpenPages with Watson 8.3 and 9.0 may write improperly neutralized data to server log files when the tracing is enabled per the System Tracing feature. | ||||
| CVE-2024-49779 | 3 Ibm, Linux, Microsoft | 3 Openpages With Watson, Linux Kernel, Windows | 2025-08-15 | 4.3 Medium |
| IBM OpenPages with Watson 8.3 and 9.0 IBM OpenPages could allow a remote attacker to bypass security restrictions, caused by improper validation and management of authentication cookies. By modifying the CSRF token and Session Id cookie parameters using the cookies of another user, a remote attacker could exploit this vulnerability to bypass security restrictions and gain unauthorized access to the vulnerable application. | ||||
| CVE-2024-49780 | 3 Ibm, Linux, Microsoft | 3 Openpages With Watson, Linux Kernel, Windows | 2025-08-15 | 5.3 Medium |
| IBM OpenPages with Watson 8.3 and 9.0 IBM OpenPages could allow a remote attacker to traverse directories on the system. An attacker with privileges to perform Import Configuration could send a specially crafted http request containing "dot dot" sequences (/../) in the file name parameter used in Import Configuration to write files to arbitrary locations outside of the specified directory and possibly overwrite arbitrary files. | ||||
| CVE-2024-49781 | 3 Ibm, Linux, Microsoft | 3 Openpages With Watson, Linux Kernel, Windows | 2025-08-15 | 7.1 High |
| IBM OpenPages with Watson 8.3 and 9.0 IBM OpenPages is vulnerable to an XML external entity injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. | ||||
| CVE-2024-49344 | 3 Ibm, Linux, Microsoft | 3 Openpages With Watson, Linux Kernel, Windows | 2025-08-15 | 4.3 Medium |
| IBM OpenPages with Watson 8.3 and 9.0 IBM OpenPages with Watson Assistant chat feature enabled the application establishes a session when a user logs in and uses chat, but the chat session is still left active after logout. | ||||
| CVE-2024-49782 | 3 Ibm, Linux, Microsoft | 3 Openpages With Watson, Linux Kernel, Windows | 2025-08-15 | 6.8 Medium |
| IBM OpenPages with Watson 8.3 and 9.0 could allow a remote attacker to spoof mail server identity when using SSL/TLS security. An attacker could exploit this vulnerability to gain access to sensitive information disclosed through email notifications generated by OpenPages or disrupt notification delivery. | ||||
| CVE-2024-49337 | 3 Ibm, Linux, Microsoft | 3 Openpages With Watson, Linux Kernel, Windows | 2025-08-15 | 5.4 Medium |
| IBM OpenPages with Watson 8.3 and 9.0 IBM OpenPages is vulnerable to HTML injection, caused by improper validation of user-supplied input of text fields used to construct workflow email notifications. A remote authenticated attacker could exploit this vulnerability using HTML tags in a text field of an object to inject malicious script into an email which would be executed in a victim's mail client within the security context of the OpenPages mail message. An attacker could use this for phishing or identity theft attacks. | ||||
| CVE-2024-56341 | 3 Ibm, Linux, Microsoft | 4 Aix, Content Navigator, Linux Kernel and 1 more | 2025-08-15 | 5.4 Medium |
| IBM Content Navigator 3.0.11, 3.0.15, and 3.1.0 is vulnerable to cross-site scripting. This vulnerability allows an authenticated user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. | ||||