| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Rack::Session is a session management implementation for Rack. In versions starting from 2.0.0 to before 2.1.1, when using the Rack::Session::Pool middleware, and provided the attacker can acquire a session cookie (already a major issue), the session may be restored if the attacker can trigger a long running request (within that same session) adjacent to the user logging out, in order to retain illicit access even after a user has attempted to logout. This issue has been patched in version 2.1.1. |
| A path traversal vulnerability has been reported to affect several product versions. If a local attacker gains a user account, they can then exploit the vulnerability to read the contents of unexpected files or system data.
We have already fixed the vulnerability in the following versions:
Qfinder Pro Mac 7.13.0 and later
Qsync for Mac 5.1.5 and later
QVPN Device Client for Mac 2.2.8 and later |
| Time-of-check time-of-use race condition for some Intel Ethernet Adapter Complete Driver Pack software before version 1.5.1.0 within Ring 3: User Applications may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires active user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Race condition in BIOS firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access. |
| Time-of-check time-of-use race condition for some ACAT before version 3.13 within Ring 3: User Applications may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires active user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A race condition vulnerability exists where an authenticated, local attacker on a Windows Nessus host could modify installation parameters at installation time, which could lead to the execution of arbitrary code on the Nessus host |
| MSI Center before 2.0.52.0 allows TOCTOU Local Privilege Escalation. |
| Time-of-check time-of-use race condition in the UEFI firmware SmiVariable driver for the Intel(R) Server D50DNP and M50FCP boards may allow a privileged user to enable escalation of privilege via local access. |
| Link Following Local Privilege Escalation Vulnerability in TuneUp Service in AVG TuneUp Version 23.4 (build 15592) on Windows 10 allows local attackers to escalate privileges and execute arbitrary code in the context of SYSTEM via creating a symbolic link and leveraging a TOCTTOU (time-of-check to time-of-use) attack. |
| OpenClaw before 2026.3.22 contains a policy bypass vulnerability where queued node actions are not revalidated against current command policy when delivered. Attackers can exploit stale allowlists or declarations that survive policy tightening to execute unauthorized commands. |
| The Intel EPT paging code uses an optimization to defer flushing of any cached
EPT state until the p2m lock is dropped, so that multiple modifications done
under the same locked region only issue a single flush.
Freeing of paging structures however is not deferred until the flushing is
done, and can result in freed pages transiently being present in cached state.
Such stale entries can point to memory ranges not owned by the guest, thus
allowing access to unintended memory regions. |
| Homarr is an open-source dashboard. Prior to 1.57.0, the user registration endpoint (/api/trpc/user.register) is vulnerable to a race condition that allows an attacker to create multiple user accounts from a single-use invite token. The registration flow performs three sequential database operations without a transaction: CHECK, CREATE, and DELETE. Because these operations are not atomic, concurrent requests can all pass the validation step (1) before any of them reaches the deletion step (3). This allows multiple accounts to be registered using a single invite token that was intended to be single-use. This vulnerability is fixed in 1.57.0. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: fix multishot recv missing EOF on wakeup race
When a socket send and shutdown() happen back-to-back, both fire
wake-ups before the receiver's task_work has a chance to run. The first
wake gets poll ownership (poll_refs=1), and the second bumps it to 2.
When io_poll_check_events() runs, it calls io_poll_issue() which does a
recv that reads the data and returns IOU_RETRY. The loop then drains all
accumulated refs (atomic_sub_return(2) -> 0) and exits, even though only
the first event was consumed. Since the shutdown is a persistent state
change, no further wakeups will happen, and the multishot recv can hang
forever.
Check specifically for HUP in the poll loop, and ensure that another
loop is done to check for status if more than a single poll activation
is pending. This ensures we don't lose the shutdown event. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting
PLIC ignores interrupt completion message for disabled interrupt, explained
by the specification:
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the
claim/complete register. The PLIC does not check whether the completion
ID is the same as the last claim ID for that target. If the completion
ID does not match an interrupt source that is currently enabled for
the target, the completion is silently ignored.
This caused problems in the past, because an interrupt can be disabled
while still being handled and plic_irq_eoi() had no effect. That was fixed
by checking if the interrupt is disabled, and if so enable it, before
sending the completion message. That check is done with irqd_irq_disabled().
However, that is not sufficient because the enable bit for the handling
hart can be zero despite irqd_irq_disabled(d) being false. This can happen
when affinity setting is changed while a hart is still handling the
interrupt.
This problem is easily reproducible by dumping a large file to uart (which
generates lots of interrupts) and at the same time keep changing the uart
interrupt's affinity setting. The uart port becomes frozen almost
instantaneously.
Fix this by checking PLIC's enable bit instead of irqd_irq_disabled(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: unconditionally bump set->nelems before insertion
In case that the set is full, a new element gets published then removed
without waiting for the RCU grace period, while RCU reader can be
walking over it already.
To address this issue, add the element transaction even if set is full,
but toggle the set_full flag to report -ENFILE so the abort path safely
unwinds the set to its previous state.
As for element updates, decrement set->nelems to restore it.
A simpler fix is to call synchronize_rcu() in the error path.
However, with a large batch adding elements to already maxed-out set,
this could cause noticeable slowdown of such batches. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix __perf_event_overflow() vs perf_remove_from_context() race
Make sure that __perf_event_overflow() runs with IRQs disabled for all
possible callchains. Specifically the software events can end up running
it with only preemption disabled.
This opens up a race vs perf_event_exit_event() and friends that will go
and free various things the overflow path expects to be present, like
the BPF program. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics - fix crash when enabling pass-through port
When enabling a pass-through port an interrupt might come before psmouse
driver binds to the pass-through port. However synaptics sub-driver
tries to access psmouse instance presumably associated with the
pass-through port to figure out if only 1 byte of response or entire
protocol packet needs to be forwarded to the pass-through port and may
crash if psmouse instance has not been attached to the port yet.
Fix the crash by introducing open() and close() methods for the port and
check if the port is open before trying to access psmouse instance.
Because psmouse calls serio_open() only after attaching psmouse instance
to serio port instance this prevents the potential crash. |
| A Time-of-Check to Time-of-Use (TOCTOU) race condition vulnerability in Balena Etcher for Windows prior to v2.1.4 allows attackers to escalate privileges and execute arbitrary code via replacing a legitimate script with a crafted payload during the flashing process. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to versions 8.6.64 and 9.7.0-alpha.8, an attacker who possesses a valid authentication provider token and a single MFA recovery code or SMS one-time password can create multiple authenticated sessions by sending concurrent login requests via the authData login endpoint. This defeats the single-use guarantee of MFA recovery codes and SMS one-time passwords, allowing session persistence even after the legitimate user revokes detected sessions. This issue has been patched in versions 8.6.64 and 9.7.0-alpha.8. |
| OpenClaw before 2026.3.8 contains an approval bypass vulnerability in system.run where mutable script operands are not bound across approval and execution phases. Attackers can obtain approval for script execution, modify the approved script file before execution, and execute different content while maintaining the same approved command shape. |
