| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
blk-wbt: remove WARN_ON_ONCE from wbt_init_enable_default()
wbt_init_enable_default() uses WARN_ON_ONCE to check for failures from
wbt_alloc() and wbt_init(). However, both are expected failure paths:
- wbt_alloc() can return NULL under memory pressure (-ENOMEM)
- wbt_init() can fail with -EBUSY if wbt is already registered
syzbot triggers this by injecting memory allocation failures during MTD
partition creation via ioctl(BLKPG), causing a spurious warning.
wbt_init_enable_default() is a best-effort initialization called from
blk_register_queue() with a void return type. Failure simply means the
disk operates without writeback throttling, which is harmless.
Replace WARN_ON_ONCE with plain if-checks, consistent with how
wbt_set_lat() in the same file already handles these failures. Add a
pr_warn() for the wbt_init() failure to retain diagnostic information
without triggering a full stack trace. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: remove redundant netdev_lock_ops() from conduit ethtool ops
DSA replaces the conduit (master) device's ethtool_ops with its own
wrappers that aggregate stats from both the conduit and DSA switch
ports. Taking the lock again inside the DSA wrappers causes a deadlock.
Stumbled upon this when booting qemu with fbnic and CONFIG_NET_DSA_LOOP=y
(which looks like some kind of testing device that auto-populates the ports
of eth0). `ethtool -i` is enough to deadlock. This means we have basically zero
coverage for DSA stuff with real ops locked devs.
Remove the redundant netdev_lock_ops()/netdev_unlock_ops() calls from
the DSA conduit ethtool wrappers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
[Why]
dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with
DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),
which disables local softirqs.
The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to
allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,
which calls BUG_ON(in_interrupt()) because it's invoked within the
FPU-enabled (softirq disabled) region, leading to a kernel crash.
[How]
Wrap the dc_state_create_phantom_plane() call with the
DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during
this memory allocation.
(cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) |
| A vulnerability was detected in CherryHQ cherry-studio up to 1.9.7. This affects the function sha256 of the file src/main/services/memory/MemoryService.ts of the component CherryIN Preload API. Performing a manipulation of the argument state results in authorization bypass. The attack can be initiated remotely. The attack's complexity is rated as high. It is indicated that the exploitability is difficult. The exploit is now public and may be used. The vendor explains, that "[m]emory is planned to be removed in v2 version." |
| OpenProject is open-source, web-based project management software. Prior to 17.3.2 and 17.4.0, the web application's meetings filter feature leaks whether a given user ID corresponds to a valid account and discloses the user's full name, allowing an attacker to enumerate all existing user accounts by probing user IDs and observing differences in the server response. This vulnerability is fixed in 17.3.2 and 17.4.0. |
| OpenProject is open-source, web-based project management software. Prior to 17.3.2 and 17.4.0, Business Logic Error on OpenProject through PATCH request to /api/v3/users/me permits to bypass password requirements. A password validation flaw in the change password behavior allows attackers to change a user's password only with an active session takeover. This vulnerability is fixed in 17.3.2 and 17.4.0. |
| dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS). |
| A weakness has been identified in 78 xiaozhi-esp32 up to 2.2.6. Affected by this issue is the function ParseMessage of the file main/mcp_server.cc of the component MCP Response Handler. This manipulation causes improper synchronization. Remote exploitation of the attack is possible. The attack's complexity is rated as high. The exploitation is known to be difficult. The exploit has been made available to the public and could be used for attacks. The pull request to fix this issue awaits acceptance. |
| OpenProject is open-source, web-based project management software. Prior to 17.3.2 and 17.4.0, OpenProject exposes a document update endpoint used to modify existing documents. The target document is loaded with visibility checks and then updated. During update, attacker-controlled attributes are applied to the persisted record before authorization is enforced. As a result, a user without :manage_documents in the source project can move and modify foreign project documents by setting project_id in a single PATCH request. This vulnerability is fixed in 17.3.2 and 17.4.0. |
| OpenProject is open-source, web-based project management software. Prior to 17.4.0, `GET /api/v3/meetings/:meeting_id/agenda_items/:agenda_item_id` discloses private work package data from a linked work package that belongs to a private/inaccessible project. This vulnerability is fixed in 17.4.0. |
| OpenProject is open-source, web-based project management software. Prior to 17.3.3 and 17.4.1, there is an IDOR through /projects/<A>/settings/project_storages/<A_ps_id> via PATCH parameter "storages_project_storage[project_folder_id]" leads to Access to Unauthorized Resources. A project-admin in one project can hijack the managed Nextcloud or OneDrive folder of another project on the same storage by writing the victim project's project_folder_id into the attacker's Storages::ProjectStorage row. The next managed-folder sync overwrites the ACL on the referenced folder with the attacker project's user list. This vulnerability is fixed in 17.3.3 and 17.4.1. |
| A security flaw has been discovered in CodeAstro Complaint Management System 1.0. The affected element is the function deletereport of the file application/controllers/Report.php of the component Report Endpoint. The manipulation results in authorization bypass. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in
send_sigio() and send_sigurg() when a process group receives a signal.
When FASYNC is configured for a process group (PIDTYPE_PGID), both
functions use read_lock(&tasklist_lock) to traverse the task list.
However, they are frequently called from softirq context:
- send_sigio() via input_inject_event -> kill_fasync
- send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ)
The deadlock is caused by the rwlock writer fairness mechanism:
1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait().
2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in
fork() or exit() and spins, which blocks all new readers.
3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception).
4. The softirq calls send_sigurg() and attempts to acquire
read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting.
Since PID hashing and do_each_pid_task() traversals are already
RCU-protected, the read_lock on tasklist_lock is no longer strictly
required for safe traversal. Fix this by replacing tasklist_lock with
rcu_read_lock(), aligning the process group signaling path with the
single-PID path. This also mitigates a potential remote denial of
service vector via TCP URG packets.
Lockdep splat:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[...]
Chain exists of:
&dev->event_lock --> &f_owner->lock --> tasklist_lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(tasklist_lock);
local_irq_disable();
lock(&dev->event_lock);
lock(&f_owner->lock);
<Interrupt>
lock(&dev->event_lock);
*** DEADLOCK *** |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/xe: Skip exec queue schedule toggle if queue is idle during suspend"
This reverts commit 8533051ce92015e9cc6f75e0d52119b9d91610b6.
The idle-skip optimization bypasses GuC suspend, so the GPU may not
perform the context switch that flushes TLB entries for invalidated
userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB
invalidation and page faults during userptr invalidation tests.
Restore unconditional schedule toggling on suspend so the context-switch
TLB flush is always performed.
This optimization will be reintroduced with a fix that does not skip
suspend in LR/preempt-fence VM mode.
(cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: bail out on template ct in get eval
I noticed this issue while looking at a historic syzbot report [1].
A rule like the one below is enough to trigger the bug:
table ip t {
chain pre {
type filter hook prerouting priority raw;
ct zone set 1
ct original saddr 1.2.3.4 accept
}
}
The first expression attaches a per-cpu template ct via
nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all
zero, nf_ct_l3num(ct) == 0). The next expression then calls
nft_ct_get_eval() on the same skb, treats the template as a real ct
and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this
overflows past struct nft_regs on the kernel stack; with smaller
dreg values it silently clobbers adjacent registers.
Reject template ct at the eval entry and in nft_ct_get_fast_eval(),
mirroring the check nft_ct_set_eval() already has. Additionally,
bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len
instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple
before pkt_to_tuple() fills in only the protocol-relevant leading
bytes, so the trailing bytes of tuple->{src,dst}.u3.all are
well-defined zero. priv->len is validated at rule load, so the
copy size is now bounded by the destination register rather than
by an untrusted field on the conntrack.
[1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: handle rbtree insertion error in decode_choose_args()
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. The received CRUSH map may optionally contain
choose_args that get decoded in decode_choose_args(). In this function,
num_choose_arg_maps is read from the message, and a corresponding number
of crush_choose_arg_maps gets decoded afterwards. Each
crush_choose_arg_map has a choose_args_index, which serves as the key
when inserting it into the choose_args rbtree of the decoded crush_map.
If a (potentially corrupted) message contains two crush_choose_arg_maps
with the same index, the assertion in insert_choose_arg_map() triggers a
kernel BUG when trying to insert the second crush_choose_arg_map.
This patch fixes the issue by switching to the non-asserting rbtree
insertion function and rejecting the message if the insertion fails.
[ idryomov: changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix clone_alias() to use the original device's devid
Currently clone_alias() assumes first argument (pdev) is always the
original device pointer. This function is called by
pci_for_each_dma_alias() which based on topology decides to send
original or alias device details in first argument.
This meant that the source devid used to look up and copy the DTE
may be incorrect, leading to wrong or stale DTE entries being
propagated to alias device.
Fix this by passing the original pdev as the opaque data argument to
both the direct clone_alias() call and pci_for_each_dma_alias(). Inside
clone_alias(), retrieve the original device from data and compute devid
from it. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Take the SRCU lock for page table walks in fault injection and AT emulation
walk_s1() and kvm_walk_nested_s2() expect to be called while holding
kvm->srcu to guard against memslot changes. While this is generally
the case, __kvm_at_s12() and __kvm_find_s1_desc_level() call into the
respective walkers without taking kvm->srcu.
Fix by acquiring kvm->srcu prior to the table walk in both instances. |
| In the Linux kernel, the following vulnerability has been resolved:
timers/migration: Fix livelock in tmigr_handle_remote_up()
tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu ==
smp_processor_id(), assuming the local softirq path already handled this
CPU's timers.
This assumption is wrong because jiffies can advance after the handling of
the CPU's global timers in run_timer_base(BASE_GLOBAL) and before
tmigr_handle_remote() evaluates the expiry times.
As a consequence a timer which expires after the CPU local timer wheel
advanced and becomes expired in the remote handling is ignored and the
callback is never invoked and removed from the timer wheel.
What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it
as expired, and the event is re-queued with expires == now on each
iteration. The goto-again loop spins indefinitely.
Fix this by calling timer_expire_remote() unconditionally. That's minimal
overhead for the common case as __run_timer_base() returns immediately if
there is nothing to expire in the local wheel.
[ tglx: Amend change log and add a comment ] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umem: Fix truncation for block sizes >= 4G
When the iommu is used the linearization of the mapping can give a single
block that is very large split across multiple SG entries.
When __rdma_block_iter_next() reassembles the split SG entries it is
overflowing the 32 bit stack values and computed the wrong DMA addresses
for blocks after the truncation.
Use the right types to hold DMA addresses. |
