| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid mapping wrong physical block for swapfile
Xiaolong Guo reported a f2fs bug in bugzilla [1]
[1] https://bugzilla.kernel.org/show_bug.cgi?id=220951
Quoted:
"When using stress-ng's swap stress test on F2FS filesystem with kernel 6.6+,
the system experiences data corruption leading to either:
1 dm-verity corruption errors and device reboot
2 F2FS node corruption errors and boot hangs
The issue occurs specifically when:
1 Using F2FS filesystem (ext4 is unaffected)
2 Swapfile size is less than F2FS section size (2MB)
3 Swapfile has fragmented physical layout (multiple non-contiguous extents)
4 Kernel version is 6.6+ (6.1 is unaffected)
The root cause is in check_swap_activate() function in fs/f2fs/data.c. When the
first extent of a small swapfile (< 2MB) is not aligned to section boundaries,
the function incorrectly treats it as the last extent, failing to map
subsequent extents. This results in incorrect swap_extent creation where only
the first extent is mapped, causing subsequent swap writes to overwrite wrong
physical locations (other files' data).
Steps to Reproduce
1 Setup a device with F2FS-formatted userdata partition
2 Compile stress-ng from https://github.com/ColinIanKing/stress-ng
3 Run swap stress test: (Android devices)
adb shell "cd /data/stressng; ./stress-ng-64 --metrics-brief --timeout 60
--swap 0"
Log:
1 Ftrace shows in kernel 6.6, only first extent is mapped during second
f2fs_map_blocks call in check_swap_activate():
stress-ng-swap-8990: f2fs_map_blocks: ino=11002, file offset=0, start
blkaddr=0x43143, len=0x1
(Only 4KB mapped, not the full swapfile)
2 in kernel 6.1, both extents are correctly mapped:
stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=0, start
blkaddr=0x13cd4, len=0x1
stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=1, start
blkaddr=0x60c84b, len=0xff
The problematic code is in check_swap_activate():
if ((pblock - SM_I(sbi)->main_blkaddr) % blks_per_sec ||
nr_pblocks % blks_per_sec ||
!f2fs_valid_pinned_area(sbi, pblock)) {
bool last_extent = false;
not_aligned++;
nr_pblocks = roundup(nr_pblocks, blks_per_sec);
if (cur_lblock + nr_pblocks > sis->max)
nr_pblocks -= blks_per_sec;
/* this extent is last one */
if (!nr_pblocks) {
nr_pblocks = last_lblock - cur_lblock;
last_extent = true;
}
ret = f2fs_migrate_blocks(inode, cur_lblock, nr_pblocks);
if (ret) {
if (ret == -ENOENT)
ret = -EINVAL;
goto out;
}
if (!last_extent)
goto retry;
}
When the first extent is unaligned and roundup(nr_pblocks, blks_per_sec)
exceeds sis->max, we subtract blks_per_sec resulting in nr_pblocks = 0. The
code then incorrectly assumes this is the last extent, sets nr_pblocks =
last_lblock - cur_lblock (entire swapfile), and performs migration. After
migration, it doesn't retry mapping, so subsequent extents are never processed.
"
In order to fix this issue, we need to lookup block mapping info after
we migrate all blocks in the tail of swapfile. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid UAF in f2fs_write_end_io()
As syzbot reported an use-after-free issue in f2fs_write_end_io().
It is caused by below race condition:
loop device umount
- worker_thread
- loop_process_work
- do_req_filebacked
- lo_rw_aio
- lo_rw_aio_complete
- blk_mq_end_request
- blk_update_request
- f2fs_write_end_io
- dec_page_count
- folio_end_writeback
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: free(sbi)
: get_pages(, F2FS_WB_CP_DATA)
accessed sbi which is freed
In kill_f2fs_super(), we will drop all page caches of f2fs inodes before
call free(sbi), it guarantee that all folios should end its writeback, so
it should be safe to access sbi before last folio_end_writeback().
Let's relocate ckpt thread wakeup flow before folio_end_writeback() to
resolve this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix out-of-bounds access in sysfs attribute read/write
Some f2fs sysfs attributes suffer from out-of-bounds memory access and
incorrect handling of integer values whose size is not 4 bytes.
For example:
vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out
vm:~# cat /sys/fs/f2fs/vde/carve_out
65537
vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold
vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold
1
carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit
integer. However, the sysfs interface allows setting it to a value
larger than 255, resulting in an out-of-range update.
atgc_age_threshold maps to {struct atgc_management}->age_threshold,
which is a 64-bit integer, but its sysfs interface cannot correctly set
values larger than UINT_MAX.
The root causes are:
1. __sbi_store() treats all default values as unsigned int, which
prevents updating integers larger than 4 bytes and causes out-of-bounds
writes for integers smaller than 4 bytes.
2. f2fs_sbi_show() also assumes all default values are unsigned int,
leading to out-of-bounds reads and incorrect access to integers larger
than 4 bytes.
This patch introduces {struct f2fs_attr}->size to record the actual size
of the integer associated with each sysfs attribute. With this
information, sysfs read and write operations can correctly access and
update values according to their real data size, avoiding memory
corruption and truncation. |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: Fix race condition in espintcp_close()
This issue was discovered during a code audit.
After cancel_work_sync() is called from espintcp_close(),
espintcp_tx_work() can still be scheduled from paths such as
the Delayed ACK handler or ksoftirqd.
As a result, the espintcp_tx_work() worker may dereference a
freed espintcp ctx or sk.
The following is a simple race scenario:
cpu0 cpu1
espintcp_close()
cancel_work_sync(&ctx->work);
espintcp_write_space()
schedule_work(&ctx->work);
To prevent this race condition, cancel_work_sync() is
replaced with disable_work_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
tls: Fix race condition in tls_sw_cancel_work_tx()
This issue was discovered during a code audit.
After cancel_delayed_work_sync() is called from tls_sk_proto_close(),
tx_work_handler() can still be scheduled from paths such as the
Delayed ACK handler or ksoftirqd.
As a result, the tx_work_handler() worker may dereference a freed
TLS object.
The following is a simple race scenario:
cpu0 cpu1
tls_sk_proto_close()
tls_sw_cancel_work_tx()
tls_write_space()
tls_sw_write_space()
if (!test_and_set_bit(BIT_TX_SCHEDULED, &tx_ctx->tx_bitmask))
set_bit(BIT_TX_SCHEDULED, &ctx->tx_bitmask);
cancel_delayed_work_sync(&ctx->tx_work.work);
schedule_delayed_work(&tx_ctx->tx_work.work, 0);
To prevent this race condition, cancel_delayed_work_sync() is
replaced with disable_delayed_work_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
regmap: maple: free entry on mas_store_gfp() failure
regcache_maple_write() allocates a new block ('entry') to merge
adjacent ranges and then stores it with mas_store_gfp().
When mas_store_gfp() fails, the new 'entry' remains allocated and
is never freed, leaking memory.
Free 'entry' on the failure path; on success continue freeing the
replaced neighbor blocks ('lower', 'upper'). |
| Improper certificate validation in the identity provider connection components in Amazon Athena ODBC driver before 2.1.0.0 might allow a man-in-the-middle threat actor to intercept authentication credentials due to insufficient default transport security when connecting to identity providers. This only applies to connections with external identity providers and does not apply to connections with Athena.
To remediate this issue, users should upgrade to version 2.1.0.0. |
| Insufficient authentication security controls in the browser-based authentication components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to intercept or hijack authentication sessions due to insufficient protections in the browser-based authentication flows.
To remediate this issue, users should upgrade to version 2.1.0.0. |
| Allocation of resources without limits in the parsing components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to cause a denial of service by delivering crafted input that triggers excessive resource consumption during the driver's parsing operations.
To remediate this issue, users should upgrade to version 2.1.0.0. |
| OS command injection in the browser-based authentication component in Amazon Athena ODBC driver before 2.0.5.1 on Linux might allow a threat actor to execute arbitrary code by using specially crafted connection parameters that are loaded by the driver during a local user-initiated connection.
To remediate this issue, users should upgrade to version 2.0.5.1 or later. |
| Out-of-bounds write in the query processing components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to crash the driver by using specially crafted data that is processed by the driver during query operations.
To remediate this issue, users should upgrade to version 2.1.0.0. |
| Improper neutralization of special elements in the authentication components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to execute arbitrary code or redirect authentication flows by using specially crafted connection parameters that are processed by the driver during user-initiated authentication.
To remediate this issue, users should upgrade to version 2.1.0.0. |
| Use after free in Navigation in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Incorrect security UI in Blink in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient policy enforcement in browser UI in Google Chrome prior to 147.0.7727.55 allowed a remote attacker who had compromised the renderer process to spoof the contents of the Omnibox (URL bar) via a crafted HTML page. (Chromium security severity: Medium) |
| Policy bypass in LocalNetworkAccess in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Incorrect security UI in Fullscreen in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient policy enforcement in PWAs in Google Chrome prior to 147.0.7727.55 allowed a remote attacker who had compromised the renderer process to install a PWA without user consent via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in PDF in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Low) |
| Policy bypass in Audio in Google Chrome prior to 147.0.7727.55 allowed a remote attacker who convinced a user to engage in specific UI gestures to bypass sandbox download restrictions via a crafted HTML page. (Chromium security severity: Low) |
