| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Handle the case that EIOINTC's coremap is empty
EIOINTC's coremap in eiointc_update_sw_coremap() can be empty, currently
we get a cpuid with -1 in this case, but we actually need 0 because it's
similar as the case that cpuid >= 4.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. |
| In the Linux kernel, the following vulnerability has been resolved:
can: gw: fix OOB heap access in cgw_csum_crc8_rel()
cgw_csum_crc8_rel() correctly computes bounds-safe indices via calc_idx():
int from = calc_idx(crc8->from_idx, cf->len);
int to = calc_idx(crc8->to_idx, cf->len);
int res = calc_idx(crc8->result_idx, cf->len);
if (from < 0 || to < 0 || res < 0)
return;
However, the loop and the result write then use the raw s8 fields directly
instead of the computed variables:
for (i = crc8->from_idx; ...) /* BUG: raw negative index */
cf->data[crc8->result_idx] = ...; /* BUG: raw negative index */
With from_idx = to_idx = result_idx = -64 on a 64-byte CAN FD frame,
calc_idx(-64, 64) = 0 so the guard passes, but the loop iterates with
i = -64, reading cf->data[-64], and the write goes to cf->data[-64].
This write might end up to 56 (7.0-rc) or 40 (<= 6.19) bytes before the
start of the canfd_frame on the heap.
The companion function cgw_csum_xor_rel() uses `from`/`to`/`res`
correctly throughout; fix cgw_csum_crc8_rel() to match.
Confirmed with KASAN on linux-7.0-rc2:
BUG: KASAN: slab-out-of-bounds in cgw_csum_crc8_rel+0x515/0x5b0
Read of size 1 at addr ffff8880076619c8 by task poc_cgw_oob/62
To configure the can-gw crc8 checksums CAP_NET_ADMIN is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Unlink NV12 planes earlier
unlink_nv12_plane() will clobber parts of the plane state
potentially already set up by plane_atomic_check(), so we
must make sure not to call the two in the wrong order.
The problem happens when a plane previously selected as
a Y plane is now configured as a normal plane by user space.
plane_atomic_check() will first compute the proper plane
state based on the userspace request, and unlink_nv12_plane()
later clears some of the state.
This used to work on account of unlink_nv12_plane() skipping
the state clearing based on the plane visibility. But I removed
that check, thinking it was an impossible situation. Now when
that situation happens unlink_nv12_plane() will just WARN
and proceed to clobber the state.
Rather than reverting to the old way of doing things, I think
it's more clear if we unlink the NV12 planes before we even
compute the new plane state.
(cherry picked from commit 017ecd04985573eeeb0745fa2c23896fb22ee0cc) |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: designware: amdisp: Fix resume-probe race condition issue
Identified resume-probe race condition in kernel v7.0 with the commit
38fa29b01a6a ("i2c: designware: Combine the init functions"),but this
issue existed from the beginning though not detected.
The amdisp i2c device requires ISP to be in power-on state for probe
to succeed. To meet this requirement, this device is added to genpd
to control ISP power using runtime PM. The pm_runtime_get_sync() called
before i2c_dw_probe() triggers PM resume, which powers on ISP and also
invokes the amdisp i2c runtime resume before the probe completes resulting
in this race condition and a NULL dereferencing issue in v7.0
Fix this race condition by using the genpd APIs directly during probe:
- Call dev_pm_genpd_resume() to Power ON ISP before probe
- Call dev_pm_genpd_suspend() to Power OFF ISP after probe
- Set the device to suspended state with pm_runtime_set_suspended()
- Enable runtime PM only after the device is fully initialized |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: Fix kernel panic due to __initconst misuse
Fix a kernel panic when probing the driver as a module:
Unable to handle kernel paging request at virtual address
ffffd9c18eb05000
of_find_matching_node_and_match+0x5c/0x1a0
hantro_probe+0x2f4/0x7d0 [hantro_vpu]
The imx8mq_vpu_shared_resources array is referenced by variant
structures through their shared_devices field. When built as a
module, __initconst causes this data to be freed after module
init, but it's later accessed during probe, causing a page fault.
The imx8mq_vpu_shared_resources is referenced from non-init code,
so keeping __initconst or __initconst_or_module here is wrong.
Drop the __initconst annotation and let it live in the normal .rodata
section.
A bug of __initconst called from regular non-init probe code
leading to bugs during probe deferrals or during unbind-bind cycles. |
| In the Linux kernel, the following vulnerability has been resolved:
clockevents: Add missing resets of the next_event_forced flag
The prevention mechanism against timer interrupt starvation missed to reset
the next_event_forced flag in a couple of places:
- When the clock event state changes. That can cause the flag to be
stale over a shutdown/startup sequence
- When a non-forced event is armed, which then prevents rearming before
that event. If that event is far out in the future this will cause
missed timer interrupts.
- In the suspend wakeup handler.
That led to stalls which have been reported by several people.
Add the missing resets, which fixes the problems for the reporters. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/userfaultfd: fix hugetlb fault mutex hash calculation
In mfill_atomic_hugetlb(), linear_page_index() is used to calculate the
page index for hugetlb_fault_mutex_hash(). However, linear_page_index()
returns the index in PAGE_SIZE units, while hugetlb_fault_mutex_hash()
expects the index in huge page units. This mismatch means that different
addresses within the same huge page can produce different hash values,
leading to the use of different mutexes for the same huge page. This can
cause races between faulting threads, which can corrupt the reservation
map and trigger the BUG_ON in resv_map_release().
Fix this by introducing hugetlb_linear_page_index(), which returns the
page index in huge page granularity, and using it in place of
linear_page_index(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: hackrf: fix to not free memory after the device is registered in hackrf_probe()
In hackrf driver, the following race condition occurs:
```
CPU0 CPU1
hackrf_probe()
kzalloc(); // alloc hackrf_dev
....
v4l2_device_register();
....
fd = sys_open("/path/to/dev"); // open hackrf fd
....
v4l2_device_unregister();
....
kfree(); // free hackrf_dev
....
sys_ioctl(fd, ...);
v4l2_ioctl();
video_is_registered() // UAF!!
....
sys_close(fd);
v4l2_release() // UAF!!
hackrf_video_release()
kfree(); // DFB!!
```
When a V4L2 or video device is unregistered, the device node is removed so
new open() calls are blocked.
However, file descriptors that are already open-and any in-flight I/O-do
not terminate immediately; they remain valid until the last reference is
dropped and the driver's release() is invoked.
Therefore, freeing device memory on the error path after hackrf_probe()
has registered dev it will lead to a race to use-after-free vuln, since
those already-open handles haven't been released yet.
And since release() free memory too, race to use-after-free and
double-free vuln occur.
To prevent this, if device is registered from probe(), it should be
modified to free memory only through release() rather than calling
kfree() directly. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix NULL i_assoc_inode dereference in nilfs_mdt_save_to_shadow_map
The DAT inode's btree node cache (i_assoc_inode) is initialized lazily
during btree operations. However, nilfs_mdt_save_to_shadow_map()
assumes i_assoc_inode is already initialized when copying dirty pages
to the shadow map during GC.
If NILFS_IOCTL_CLEAN_SEGMENTS is called immediately after mount before
any btree operation has occurred on the DAT inode, i_assoc_inode is
NULL leading to a general protection fault.
Fix this by calling nilfs_attach_btree_node_cache() on the DAT inode
in nilfs_dat_read() at mount time, ensuring i_assoc_inode is always
initialized before any GC operation can use it. |
| In the Linux kernel, the following vulnerability has been resolved:
media: as102: fix to not free memory after the device is registered in as102_usb_probe()
In as102_usb driver, the following race condition occurs:
```
CPU0 CPU1
as102_usb_probe()
kzalloc(); // alloc as102_dev_t
....
usb_register_dev();
fd = sys_open("/path/to/dev"); // open as102 fd
....
usb_deregister_dev();
....
kfree(); // free as102_dev_t
....
sys_close(fd);
as102_release() // UAF!!
as102_usb_release()
kfree(); // DFB!!
```
When a USB character device registered with usb_register_dev() is later
unregistered (via usb_deregister_dev() or disconnect), the device node is
removed so new open() calls fail. However, file descriptors that are
already open do not go away immediately: they remain valid until the last
reference is dropped and the driver's .release() is invoked.
In as102, as102_usb_probe() calls usb_register_dev() and then, on an
error path, does usb_deregister_dev() and frees as102_dev_t right away.
If userspace raced a successful open() before the deregistration, that
open FD will later hit as102_release() --> as102_usb_release() and access
or free as102_dev_t again, occur a race to use-after-free and
double-free vuln.
The fix is to never kfree(as102_dev_t) directly once usb_register_dev()
has succeeded. After deregistration, defer freeing memory to .release().
In other words, let release() perform the last kfree when the final open
FD is closed. |
| In the Linux kernel, the following vulnerability has been resolved:
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wg_netns_pre_exit() manually acquires rtnl_lock() inside the
pernet .pre_exit callback. This causes a hung task when another
thread holds rtnl_mutex - the cleanup_net workqueue (or the
setup_net failure rollback path) blocks indefinitely in
wg_netns_pre_exit() waiting to acquire the lock.
Convert to .exit_rtnl, introduced in commit 7a60d91c690b ("net:
Add ->exit_rtnl() hook to struct pernet_operations."), where the
framework already holds RTNL and batches all callbacks under a
single rtnl_lock()/rtnl_unlock() pair, eliminating the contention
window.
The rcu_assign_pointer(wg->creating_net, NULL) is safe to move
from .pre_exit to .exit_rtnl (which runs after synchronize_rcu())
because all RCU readers of creating_net either use maybe_get_net()
- which returns NULL for a dying namespace with zero refcount - or
access net->user_ns which remains valid throughout the entire
ops_undo_list sequence.
[ Jason: added __net_exit and __read_mostly annotations that were missing. ] |
| In the Linux kernel, the following vulnerability has been resolved:
bcache: fix cached_dev.sb_bio use-after-free and crash
In our production environment, we have received multiple crash reports
regarding libceph, which have caught our attention:
```
[6888366.280350] Call Trace:
[6888366.280452] blk_update_request+0x14e/0x370
[6888366.280561] blk_mq_end_request+0x1a/0x130
[6888366.280671] rbd_img_handle_request+0x1a0/0x1b0 [rbd]
[6888366.280792] rbd_obj_handle_request+0x32/0x40 [rbd]
[6888366.280903] __complete_request+0x22/0x70 [libceph]
[6888366.281032] osd_dispatch+0x15e/0xb40 [libceph]
[6888366.281164] ? inet_recvmsg+0x5b/0xd0
[6888366.281272] ? ceph_tcp_recvmsg+0x6f/0xa0 [libceph]
[6888366.281405] ceph_con_process_message+0x79/0x140 [libceph]
[6888366.281534] ceph_con_v1_try_read+0x5d7/0xf30 [libceph]
[6888366.281661] ceph_con_workfn+0x329/0x680 [libceph]
```
After analyzing the coredump file, we found that the address of
dc->sb_bio has been freed. We know that cached_dev is only freed when it
is stopped.
Since sb_bio is a part of struct cached_dev, rather than an alloc every
time. If the device is stopped while writing to the superblock, the
released address will be accessed at endio.
This patch hopes to wait for sb_write to complete in cached_dev_free.
It should be noted that we analyzed the cause of the problem, then tell
all details to the QWEN and adopted the modifications it made. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: 6fire: fix use-after-free on disconnect
In usb6fire_chip_abort(), the chip struct is allocated as the card's
private data (via snd_card_new with sizeof(struct sfire_chip)). When
snd_card_free_when_closed() is called and no file handles are open, the
card and embedded chip are freed synchronously. The subsequent
chip->card = NULL write then hits freed slab memory.
Call trace:
usb6fire_chip_abort sound/usb/6fire/chip.c:59 [inline]
usb6fire_chip_disconnect+0x348/0x358 sound/usb/6fire/chip.c:182
usb_unbind_interface+0x1a8/0x88c drivers/usb/core/driver.c:458
...
hub_event+0x1a04/0x4518 drivers/usb/core/hub.c:5953
Fix by moving the card lifecycle out of usb6fire_chip_abort() and into
usb6fire_chip_disconnect(). The card pointer is saved in a local
before any teardown, snd_card_disconnect() is called first to prevent
new opens, URBs are aborted while chip is still valid, and
snd_card_free_when_closed() is called last so chip is never accessed
after the card may be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
crash_dump: don't log dm-crypt key bytes in read_key_from_user_keying
When debug logging is enabled, read_key_from_user_keying() logs the first
8 bytes of the key payload and partially exposes the dm-crypt key. Stop
logging any key bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Fix static_branch_dec() underflow for aql_disable.
syzbot reported static_branch_dec() underflow in aql_enable_write(). [0]
The problem is that aql_enable_write() does not serialise concurrent
write()s to the debugfs.
aql_enable_write() checks static_key_false(&aql_disable.key) and
later calls static_branch_inc() or static_branch_dec(), but the
state may change between the two calls.
aql_disable does not need to track inc/dec.
Let's use static_branch_enable() and static_branch_disable().
[0]:
val == 0
WARNING: kernel/jump_label.c:311 at __static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311, CPU#0: syz.1.3155/20288
Modules linked in:
CPU: 0 UID: 0 PID: 20288 Comm: syz.1.3155 Tainted: G U L syzkaller #0 PREEMPT(full)
Tainted: [U]=USER, [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026
RIP: 0010:__static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311
Code: f2 c9 ff 5b 5d c3 cc cc cc cc e8 54 f2 c9 ff 48 89 df e8 ac f9 ff ff eb ad e8 45 f2 c9 ff 90 0f 0b 90 eb a2 e8 3a f2 c9 ff 90 <0f> 0b 90 eb 97 48 89 df e8 5c 4b 33 00 e9 36 ff ff ff 0f 1f 80 00
RSP: 0018:ffffc9000b9f7c10 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffffff9b3e5d40 RCX: ffffffff823c57b4
RDX: ffff8880285a0000 RSI: ffffffff823c5846 RDI: ffff8880285a0000
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000000a
R13: 1ffff9200173ef88 R14: 0000000000000001 R15: ffffc9000b9f7e98
FS: 00007f530dd726c0(0000) GS:ffff8881245e3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000001140 CR3: 000000007cc4a000 CR4: 00000000003526f0
Call Trace:
<TASK>
__static_key_slow_dec_cpuslocked kernel/jump_label.c:297 [inline]
__static_key_slow_dec kernel/jump_label.c:321 [inline]
static_key_slow_dec+0x7c/0xc0 kernel/jump_label.c:336
aql_enable_write+0x2b2/0x310 net/mac80211/debugfs.c:343
short_proxy_write+0x133/0x1a0 fs/debugfs/file.c:383
vfs_write+0x2aa/0x1070 fs/read_write.c:684
ksys_pwrite64 fs/read_write.c:793 [inline]
__do_sys_pwrite64 fs/read_write.c:801 [inline]
__se_sys_pwrite64 fs/read_write.c:798 [inline]
__x64_sys_pwrite64+0x1eb/0x250 fs/read_write.c:798
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xc9/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f530cf9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f530dd72028 EFLAGS: 00000246 ORIG_RAX: 0000000000000012
RAX: ffffffffffffffda RBX: 00007f530d215fa0 RCX: 00007f530cf9aeb9
RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000010
RBP: 00007f530d008c1f R08: 0000000000000000 R09: 0000000000000000
R10: 4200000000000005 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f530d216038 R14: 00007f530d215fa0 R15: 00007ffde89fb978
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom
Since upstream commit e75665dd0968 ("wifi: wlcore: ensure skb headroom
before skb_push"), wl1271_tx_allocate() and with it
wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails.
However, in wlcore_tx_work_locked(), a return value of -EAGAIN from
wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being
full. This causes the code to flush the buffer, put the skb back at the
head of the queue, and immediately retry the same skb in a tight while
loop.
Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens
immediately with GFP_ATOMIC, this will result in an infinite loop and a
CPU soft lockup. Return -ENOMEM instead so the packet is dropped and
the loop terminates.
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix the descriptor address in __kvm_at_swap_desc()
Using "(u64 __user *)hva + offset" to get the virtual addresses of S1/S2
descriptors looks really wrong, if offset is not zero. What we want to get
for swapping is hva + offset, not hva + offset*8. ;-)
Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: scrub: unlock dquot before early return in quota scrub
xchk_quota_item can return early after calling xchk_fblock_process_error.
When that helper returns false, the function returned immediately without
dropping dq->q_qlock, which can leave the dquot lock held and risk lock
leaks or deadlocks in later quota operations.
Fix this by unlocking dq->q_qlock before the early return. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: q6apm: move component registration to unmanaged version
q6apm component registers dais dynamically from ASoC toplology, which
are allocated using device managed version apis. Allocating both
component and dynamic dais using managed version could lead to incorrect
free ordering, dai will be freed while component still holding references
to it.
Fix this issue by moving component to unmanged version so
that the dai pointers are only freeded after the component is removed.
==================================================================
BUG: KASAN: slab-use-after-free in snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core]
Read of size 8 at addr ffff00084493a6e8 by task kworker/u48:0/3426
Tainted: [W]=WARN
Hardware name: LENOVO 21N2ZC5PUS/21N2ZC5PUS, BIOS N42ET57W (1.31 ) 08/08/2024
Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface]
Call trace:
show_stack+0x28/0x7c (C)
dump_stack_lvl+0x60/0x80
print_report+0x160/0x4b4
kasan_report+0xac/0xfc
__asan_report_load8_noabort+0x20/0x34
snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core]
snd_soc_unregister_component_by_driver+0x50/0x88 [snd_soc_core]
devm_component_release+0x30/0x5c [snd_soc_core]
devres_release_all+0x13c/0x210
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x350/0x468
device_release_driver+0x18/0x30
bus_remove_device+0x1a0/0x35c
device_del+0x314/0x7f0
device_unregister+0x20/0xbc
apr_remove_device+0x5c/0x7c [apr]
device_for_each_child+0xd8/0x160
apr_pd_status+0x7c/0xa8 [apr]
pdr_notifier_work+0x114/0x240 [pdr_interface]
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20
Allocated by task 77:
kasan_save_stack+0x40/0x68
kasan_save_track+0x20/0x40
kasan_save_alloc_info+0x44/0x58
__kasan_kmalloc+0xbc/0xdc
__kmalloc_node_track_caller_noprof+0x1f4/0x620
devm_kmalloc+0x7c/0x1c8
snd_soc_register_dai+0x50/0x4f0 [snd_soc_core]
soc_tplg_pcm_elems_load+0x55c/0x1eb8 [snd_soc_core]
snd_soc_tplg_component_load+0x4f8/0xb60 [snd_soc_core]
audioreach_tplg_init+0x124/0x1fc [snd_q6apm]
q6apm_audio_probe+0x10/0x1c [snd_q6apm]
snd_soc_component_probe+0x5c/0x118 [snd_soc_core]
soc_probe_component+0x44c/0xaf0 [snd_soc_core]
snd_soc_bind_card+0xad0/0x2370 [snd_soc_core]
snd_soc_register_card+0x3b0/0x4c0 [snd_soc_core]
devm_snd_soc_register_card+0x50/0xc8 [snd_soc_core]
x1e80100_platform_probe+0x208/0x368 [snd_soc_x1e80100]
platform_probe+0xc0/0x188
really_probe+0x188/0x804
__driver_probe_device+0x158/0x358
driver_probe_device+0x60/0x190
__device_attach_driver+0x16c/0x2a8
bus_for_each_drv+0x100/0x194
__device_attach+0x174/0x380
device_initial_probe+0x14/0x20
bus_probe_device+0x124/0x154
deferred_probe_work_func+0x140/0x220
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20
Freed by task 3426:
kasan_save_stack+0x40/0x68
kasan_save_track+0x20/0x40
__kasan_save_free_info+0x4c/0x80
__kasan_slab_free+0x78/0xa0
kfree+0x100/0x4a4
devres_release_all+0x144/0x210
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x350/0x468
device_release_driver+0x18/0x30
bus_remove_device+0x1a0/0x35c
device_del+0x314/0x7f0
device_unregister+0x20/0xbc
apr_remove_device+0x5c/0x7c [apr]
device_for_each_child+0xd8/0x160
apr_pd_status+0x7c/0xa8 [apr]
pdr_notifier_work+0x114/0x240 [pdr_interface]
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Protect *all* of sev_mem_enc_register_region() with kvm->lock
Take and hold kvm->lock for before checking sev_guest() in
sev_mem_enc_register_region(), as sev_guest() isn't stable unless kvm->lock
is held (or KVM can guarantee KVM_SEV_INIT{2} has completed and can't
rollack state). If KVM_SEV_INIT{2} fails, KVM can end up trying to add to
a not-yet-initialized sev->regions_list, e.g. triggering a #GP
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 110 UID: 0 PID: 72717 Comm: syz.15.11462 Tainted: G U W O 6.16.0-smp-DEV #1 NONE
Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024
RIP: 0010:sev_mem_enc_register_region+0x3f0/0x4f0 ../include/linux/list.h:83
Code: <41> 80 3c 04 00 74 08 4c 89 ff e8 f1 c7 a2 00 49 39 ed 0f 84 c6 00
RSP: 0018:ffff88838647fbb8 EFLAGS: 00010256
RAX: dffffc0000000000 RBX: 1ffff92015cf1e0b RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000001000 RDI: ffff888367870000
RBP: ffffc900ae78f050 R08: ffffea000d9e0007 R09: 1ffffd4001b3c000
R10: dffffc0000000000 R11: fffff94001b3c001 R12: 0000000000000000
R13: ffff8982ab0bde00 R14: ffffc900ae78f058 R15: 0000000000000000
FS: 00007f34e9dc66c0(0000) GS:ffff89ee64d33000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe180adef98 CR3: 000000047210e000 CR4: 0000000000350ef0
Call Trace:
<TASK>
kvm_arch_vm_ioctl+0xa72/0x1240 ../arch/x86/kvm/x86.c:7371
kvm_vm_ioctl+0x649/0x990 ../virt/kvm/kvm_main.c:5363
__se_sys_ioctl+0x101/0x170 ../fs/ioctl.c:51
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x6f/0x1f0 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f34e9f7e9a9
Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f34e9dc6038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f34ea1a6080 RCX: 00007f34e9f7e9a9
RDX: 0000200000000280 RSI: 000000008010aebb RDI: 0000000000000007
RBP: 00007f34ea000d69 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f34ea1a6080 R15: 00007ffce77197a8
</TASK>
with a syzlang reproducer that looks like:
syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000040)={0x0, &(0x7f0000000180)=ANY=[], 0x70}) (async)
syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000080)={0x0, &(0x7f0000000180)=ANY=[@ANYBLOB="..."], 0x4f}) (async)
r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000200), 0x0, 0x0)
r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0)
r2 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000240), 0x0, 0x0)
r3 = ioctl$KVM_CREATE_VM(r2, 0xae01, 0x0)
ioctl$KVM_SET_CLOCK(r3, 0xc008aeba, &(0x7f0000000040)={0x1, 0x8, 0x0, 0x5625e9b0}) (async)
ioctl$KVM_SET_PIT2(r3, 0x8010aebb, &(0x7f0000000280)={[...], 0x5}) (async)
ioctl$KVM_SET_PIT2(r1, 0x4070aea0, 0x0) (async)
r4 = ioctl$KVM_CREATE_VM(0xffffffffffffffff, 0xae01, 0x0)
openat$kvm(0xffffffffffffff9c, 0x0, 0x0, 0x0) (async)
ioctl$KVM_SET_USER_MEMORY_REGION(r4, 0x4020ae46, &(0x7f0000000400)={0x0, 0x0, 0x0, 0x2000, &(0x7f0000001000/0x2000)=nil}) (async)
r5 = ioctl$KVM_CREATE_VCPU(r4, 0xae41, 0x2)
close(r0) (async)
openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x8000, 0x0) (async)
ioctl$KVM_SET_GUEST_DEBUG(r5, 0x4048ae9b, &(0x7f0000000300)={0x4376ea830d46549b, 0x0, [0x46, 0x0, 0x0, 0x0, 0x0, 0x1000]}) (async)
ioctl$KVM_RUN(r5, 0xae80, 0x0)
Opportunistically use guard() to avoid having to define a new error label
and goto usage. |
