| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: check device is present when getting link settings
A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd7fb65
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers. |
| In the Linux kernel, the following vulnerability has been resolved:
gtp: fix a potential NULL pointer dereference
When sockfd_lookup() fails, gtp_encap_enable_socket() returns a
NULL pointer, but its callers only check for error pointers thus miss
the NULL pointer case.
Fix it by returning an error pointer with the error code carried from
sockfd_lookup().
(I found this bug during code inspection.) |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: Add poll mod list filling check
In case of im_protocols value is 1 and tm_protocols value is 0 this
combination successfully passes the check
'if (!im_protocols && !tm_protocols)' in the nfc_start_poll().
But then after pn533_poll_create_mod_list() call in pn533_start_poll()
poll mod list will remain empty and dev->poll_mod_count will remain 0
which lead to division by zero.
Normally no im protocol has value 1 in the mask, so this combination is
not expected by driver. But these protocol values actually come from
userspace via Netlink interface (NFC_CMD_START_POLL operation). So a
broken or malicious program may pass a message containing a "bad"
combination of protocol parameter values so that dev->poll_mod_count
is not incremented inside pn533_poll_create_mod_list(), thus leading
to division by zero.
Call trace looks like:
nfc_genl_start_poll()
nfc_start_poll()
->start_poll()
pn533_start_poll()
Add poll mod list filling check.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: core: Prevent USB core invalid event buffer address access
This commit addresses an issue where the USB core could access an
invalid event buffer address during runtime suspend, potentially causing
SMMU faults and other memory issues in Exynos platforms. The problem
arises from the following sequence.
1. In dwc3_gadget_suspend, there is a chance of a timeout when
moving the USB core to the halt state after clearing the
run/stop bit by software.
2. In dwc3_core_exit, the event buffer is cleared regardless of
the USB core's status, which may lead to an SMMU faults and
other memory issues. if the USB core tries to access the event
buffer address.
To prevent this hardware quirk on Exynos platforms, this commit ensures
that the event buffer address is not cleared by software when the USB
core is active during runtime suspend by checking its status before
clearing the buffer address. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: st: fix probed platform device ref count on probe error path
The probe function never performs any paltform device allocation, thus
error path "undo_platform_dev_alloc" is entirely bogus. It drops the
reference count from the platform device being probed. If error path is
triggered, this will lead to unbalanced device reference counts and
premature release of device resources, thus possible use-after-free when
releasing remaining devm-managed resources. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: aacraid: Fix double-free on probe failure
aac_probe_one() calls hardware-specific init functions through the
aac_driver_ident::init pointer, all of which eventually call down to
aac_init_adapter().
If aac_init_adapter() fails after allocating memory for aac_dev::queues,
it frees the memory but does not clear that member.
After the hardware-specific init function returns an error,
aac_probe_one() goes down an error path that frees the memory pointed to
by aac_dev::queues, resulting.in a double-free. |
| Exposure of sensitive information due to incompatible policies issue exists in Pgpool-II. If a database user accesses a query cache, table data unauthorized for the user may be retrieved. |
| Puma is a Ruby/Rack web server built for parallelism. In affected versions clients could clobber values set by intermediate proxies (such as X-Forwarded-For) by providing a underscore version of the same header (X-Forwarded_For). Any users relying on proxy set variables is affected. v6.4.3/v5.6.9 now discards any headers using underscores if the non-underscore version also exists. Effectively, allowing the proxy defined headers to always win. Users are advised to upgrade. Nginx has a underscores_in_headers configuration variable to discard these headers at the proxy level as a mitigation. Any users that are implicitly trusting the proxy defined headers for security should immediately cease doing so until upgraded to the fixed versions. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: tegra: Do not mark ACPI devices as irq safe
On ACPI machines, the tegra i2c module encounters an issue due to a
mutex being called inside a spinlock. This leads to the following bug:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
...
Call trace:
__might_sleep
__mutex_lock_common
mutex_lock_nested
acpi_subsys_runtime_resume
rpm_resume
tegra_i2c_xfer
The problem arises because during __pm_runtime_resume(), the spinlock
&dev->power.lock is acquired before rpm_resume() is called. Later,
rpm_resume() invokes acpi_subsys_runtime_resume(), which relies on
mutexes, triggering the error.
To address this issue, devices on ACPI are now marked as not IRQ-safe,
considering the dependency of acpi_subsys_runtime_resume() on mutexes. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: mmc_test: Fix NULL dereference on allocation failure
If the "test->highmem = alloc_pages()" allocation fails then calling
__free_pages(test->highmem) will result in a NULL dereference. Also
change the error code to -ENOMEM instead of returning success. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: fix error recovery leading to data corruption on ESE devices
Extent Space Efficient (ESE) or thin provisioned volumes need to be
formatted on demand during usual IO processing.
The dasd_ese_needs_format function checks for error codes that signal
the non existence of a proper track format.
The check for incorrect length is to imprecise since other error cases
leading to transport of insufficient data also have this flag set.
This might lead to data corruption in certain error cases for example
during a storage server warmstart.
Fix by removing the check for incorrect length and replacing by
explicitly checking for invalid track format in transport mode.
Also remove the check for file protected since this is not a valid
ESE handling case. |
| In the Linux kernel, the following vulnerability has been resolved:
fix bitmap corruption on close_range() with CLOSE_RANGE_UNSHARE
copy_fd_bitmaps(new, old, count) is expected to copy the first
count/BITS_PER_LONG bits from old->full_fds_bits[] and fill
the rest with zeroes. What it does is copying enough words
(BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest.
That works fine, *if* all bits past the cutoff point are
clear. Otherwise we are risking garbage from the last word
we'd copied.
For most of the callers that is true - expand_fdtable() has
count equal to old->max_fds, so there's no open descriptors
past count, let alone fully occupied words in ->open_fds[],
which is what bits in ->full_fds_bits[] correspond to.
The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds),
which is the smallest multiple of BITS_PER_LONG that covers all
opened descriptors below max_fds. In the common case (copying on
fork()) max_fds is ~0U, so all opened descriptors will be below
it and we are fine, by the same reasons why the call in expand_fdtable()
is safe.
Unfortunately, there is a case where max_fds is less than that
and where we might, indeed, end up with junk in ->full_fds_bits[] -
close_range(from, to, CLOSE_RANGE_UNSHARE) with
* descriptor table being currently shared
* 'to' being above the current capacity of descriptor table
* 'from' being just under some chunk of opened descriptors.
In that case we end up with observably wrong behaviour - e.g. spawn
a child with CLONE_FILES, get all descriptors in range 0..127 open,
then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending
up with descriptor #128, despite #64 being observably not open.
The minimally invasive fix would be to deal with that in dup_fd().
If this proves to add measurable overhead, we can go that way, but
let's try to fix copy_fd_bitmaps() first.
* new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size).
* make copy_fd_bitmaps() take the bitmap size in words, rather than
bits; it's 'count' argument is always a multiple of BITS_PER_LONG,
so we are not losing any information, and that way we can use the
same helper for all three bitmaps - compiler will see that count
is a multiple of BITS_PER_LONG for the large ones, so it'll generate
plain memcpy()+memset().
Reproducer added to tools/testing/selftests/core/close_range_test.c |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
The __vmap_pages_range_noflush() assumes its argument pages** contains
pages with the same page shift. However, since commit e9c3cda4d86e ("mm,
vmalloc: fix high order __GFP_NOFAIL allocations"), if gfp_flags includes
__GFP_NOFAIL with high order in vm_area_alloc_pages() and page allocation
failed for high order, the pages** may contain two different page shifts
(high order and order-0). This could lead __vmap_pages_range_noflush() to
perform incorrect mappings, potentially resulting in memory corruption.
Users might encounter this as follows (vmap_allow_huge = true, 2M is for
PMD_SIZE):
kvmalloc(2M, __GFP_NOFAIL|GFP_X)
__vmalloc_node_range_noprof(vm_flags=VM_ALLOW_HUGE_VMAP)
vm_area_alloc_pages(order=9) ---> order-9 allocation failed and fallback to order-0
vmap_pages_range()
vmap_pages_range_noflush()
__vmap_pages_range_noflush(page_shift = 21) ----> wrong mapping happens
We can remove the fallback code because if a high-order allocation fails,
__vmalloc_node_range_noprof() will retry with order-0. Therefore, it is
unnecessary to fallback to order-0 here. Therefore, fix this by removing
the fallback code. |
| In the Linux kernel, the following vulnerability has been resolved:
memcg_write_event_control(): fix a user-triggerable oops
we are *not* guaranteed that anything past the terminating NUL
is mapped (let alone initialized with anything sane). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Take state lock during tx timeout reporter
mlx5e_safe_reopen_channels() requires the state lock taken. The
referenced changed in the Fixes tag removed the lock to fix another
issue. This patch adds it back but at a later point (when calling
mlx5e_safe_reopen_channels()) to avoid the deadlock referenced in the
Fixes tag. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: initialise extack before use
Fix missing initialisation of extack in flow offload. |
| In the Linux kernel, the following vulnerability has been resolved:
netem: fix return value if duplicate enqueue fails
There is a bug in netem_enqueue() introduced by
commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec")
that can lead to a use-after-free.
This commit made netem_enqueue() always return NET_XMIT_SUCCESS
when a packet is duplicated, which can cause the parent qdisc's q.qlen
to be mistakenly incremented. When this happens qlen_notify() may be
skipped on the parent during destruction, leaving a dangling pointer
for some classful qdiscs like DRR.
There are two ways for the bug happen:
- If the duplicated packet is dropped by rootq->enqueue() and then
the original packet is also dropped.
- If rootq->enqueue() sends the duplicated packet to a different qdisc
and the original packet is dropped.
In both cases NET_XMIT_SUCCESS is returned even though no packets
are enqueued at the netem qdisc.
The fix is to defer the enqueue of the duplicate packet until after
the original packet has been guaranteed to return NET_XMIT_SUCCESS. |
| In the Linux kernel, the following vulnerability has been resolved:
char: xillybus: Check USB endpoints when probing device
Ensure, as the driver probes the device, that all endpoints that the
driver may attempt to access exist and are of the correct type.
All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at
address 1. This is verified in xillyusb_setup_base_eps().
On top of that, a XillyUSB device may have additional Bulk OUT
endpoints. The information about these endpoints' addresses is deduced
from a data structure (the IDT) that the driver fetches from the device
while probing it. These endpoints are checked in setup_channels().
A XillyUSB device never has more than one IN endpoint, as all data
towards the host is multiplexed in this single Bulk IN endpoint. This is
why setup_channels() only checks OUT endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: only mark 'subflow' endp as available
Adding the following warning ...
WARN_ON_ONCE(msk->pm.local_addr_used == 0)
... before decrementing the local_addr_used counter helped to find a bug
when running the "remove single address" subtest from the mptcp_join.sh
selftests.
Removing a 'signal' endpoint will trigger the removal of all subflows
linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with
rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used
counter, which is wrong in this case because this counter is linked to
'subflow' endpoints, and here it is a 'signal' endpoint that is being
removed.
Now, the counter is decremented, only if the ID is being used outside
of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and
if the ID is not 0 -- local_addr_used is not taking into account these
ones. This marking of the ID as being available, and the decrement is
done no matter if a subflow using this ID is currently available,
because the subflow could have been closed before. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: only decrement add_addr_accepted for MPJ req
Adding the following warning ...
WARN_ON_ONCE(msk->pm.add_addr_accepted == 0)
... before decrementing the add_addr_accepted counter helped to find a
bug when running the "remove single subflow" subtest from the
mptcp_join.sh selftest.
Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the
subflow closure. Before this patch, and upon the reception of the
RM_ADDR, the other peer will then try to decrement this
add_addr_accepted. That's not correct because the attached subflows have
not been created upon the reception of an ADD_ADDR.
A way to solve that is to decrement the counter only if the attached
subflow was an MP_JOIN to a remote id that was not 0, and initiated by
the host receiving the RM_ADDR. |
