| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate attribute values on lookup
ntfs_attr_find() and ntfs_external_attr_find() check that generic
resident attribute values fit in their attribute records and that
fixed-size resident values are large enough. For variable-length resident
formats, however, the fixed part is not enough: embedded length fields
can still point callers past the resident value.
A crafted image can set a small resident $FILE_NAME value_length while
leaving file_name_length large. Callers then trust file_name_length and
read past the resident value when converting or comparing the name. This
was reproduced with a crafted image under KASAN as a slab-out-of-bounds
read from the kmalloc-1k MFT record copy. The stack included
ntfs_lookup(), ntfs_iget(), ntfs_read_locked_inode(), ntfs_attr_name_get(),
ntfs_ucstonls(), and utf16s_to_utf8s().
Add a shared attribute value validator and use it before a lookup path
can return an attribute, including the AT_UNUSED enumeration case where
callers inspect returned attributes directly. The helper validates
resident value bounds, minimum resident value sizes, variable-length
$FILE_NAME fields, and non-resident mapping-pairs metadata that was
previously checked separately in both lookup paths.
This also preserves the intended resident @val matching semantics in the
external attribute lookup path. The old duplicated validation block
overwrote the actual resident value length with the type-specific minimum
length before comparing @val, so variable-length resident values could
fail to match even when the bytes were identical. Keep the comparison on
the actual value length, and make ntfs_attrlist_entry_add() compare
resident attributes with lowest_vcn zero instead of reading the
non-resident union member after a successful resident match.
Reject non-resident $FILE_NAME records too: the format requires
$FILE_NAME to be resident and callers treat returned records as resident. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: skip extent mft records in writeback to prevent deadlock
This patch fixes the ABBA deadlock between extent_lock and extent
mrec_lock triggered by xfstests generic/113, that occurs since the commit
6994acf33bae ("ntfs: use base mft_no when looking up base inode for
extent record").
Path A (inode writeback):
VFS writeback
-> ntfs_write_inode()
-> __ntfs_write_inode()
-> mutex_lock(&ni->extent_lock)
-> mutex_lock(&tni->mrec_lock)
Path B (MFT folio writeback):
VFS writeback of $MFT dirty folios
-> ntfs_mft_writepages()
-> ntfs_write_mft_block()
-> ntfs_may_write_mft_record()
-> holds one extent mrec_lock from a previous iteration
-> tries to acquire another base inode extent_lock
By removing all extent_lock and extent mrec_lock acquisition from the MFT
folio writeback path, the ABBA lock ordering is eliminated:
Path A: __ntfs_write_inode(): extent_lock -> mrec_lock
Path B (removed): ntfs_write_mft_block(): mrec_lock -> extent_lock
Path B is always redundant for extent records because:
1. mark_mft_record_dirty(ext_ni) does NOT dirty the MFT folio.
It only sets NInoDirty(ext_ni) and marks the base VFS inode dirty
via __mark_inode_dirty(I_DIRTY_DATASYNC), which triggers Path A.
Therefore, normal extent modifications never create a situation where
the MFT folio is dirty and Path B is not scheduled.
2. The MFT folio only gets dirtied via ntfs_mft_mark_dirty() inside
ntfs_mft_record_alloc(). But all identified callers in attrib.c
(ntfs_attr_add, ntfs_attr_record_move_away,
ntfs_attr_make_non_resident, ntfs_attr_record_resize) follow through
with mark_mft_record_dirty(), which triggers Path A to write the
complete record.
3. ntfs_evict_big_inode() calls ntfs_commit_inode() before freeing extent
inodes, ensuring all dirty extents are flushed via Path A before the
base inode leaves the icache. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: bound DeleteIndexEntryAllocation memmove length
In do_action()'s DeleteIndexEntryAllocation case, e->size comes
from an on-disk INDEX_BUFFER entry. When e->size makes
e + e->size point past hdr + hdr->used,
PtrOffset(e1, Add2Ptr(hdr, used)) returns a negative ptrdiff_t
that is silently cast to a quasi-infinite size_t when passed
to memmove(). The memmove then walks past the destination
buffer.
The sibling DeleteIndexEntryRoot case at fslog.c:3540-3543
already carries the corresponding guard:
if (PtrOffset(e1, Add2Ptr(hdr, used)) < esize ||
Add2Ptr(e, esize) > Add2Ptr(lrh, rec_len) ||
used + esize > le32_to_cpu(hdr->total)) {
goto dirty_vol;
}
Apply the same shape to the allocation-path case. Also reject
esize == 0: memmove(e, e, ...) is a no-op and leaves
hdr->used unchanged, hiding a malformed entry from the
existing check_index_header() walk.
Reproduced under UML+KASAN on mainline 8d90b09e6741 by
mounting a crafted NTFS image: the unguarded memmove takes a
length of 0xffffffffffffff00 and the kernel oopses in
memmove+0x81/0x1a0 on the do_action+0x36a2 frame.
[almaz.alexandrovich@paragon-software.com: clang-formatted the changes] |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
[BUG]
On-disk corruption setting l_next_free_rec to 0 in an inode's embedded
extent list triggers a UBSAN panic on the next write to that file.
[CAUSE]
ocfs2_sum_rightmost_rec() computes
i = le16_to_cpu(el->l_next_free_rec) - 1
and accesses el->l_recs[i] without validating i. When l_next_free_rec
is 0, i becomes -1; when l_next_free_rec exceeds l_count, i falls
past the end of the array. Either case violates the
__counted_by_le(l_count) annotation on l_recs[] and triggers UBSAN.
[FIX]
Validate the inode's embedded extent list when the inode is read, in
ocfs2_validate_inode_block(): l_count must be non-zero and no larger
than the inode block can hold, and l_next_free_rec must not exceed
l_count. A corrupt list is rejected at read time, before the b-tree
code can index l_recs[] out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject dinodes with non-canonical i_mode type
Patch series "ocfs2: harden inode validators against forged metadata", v2.
This series adds three structural checks to OCFS2 dinode validation so
malformed on-disk fields are rejected before ocfs2_populate_inode() copies
them into the in-core inode.
The checks cover:
- i_mode values whose type bits do not name a canonical POSIX file
type;
- non-device dinodes whose id1.dev1.i_rdev field is non-zero; and
- non-inline dinodes that claim non-zero i_size while i_clusters is
zero, covering directories unconditionally and regular files on
non-sparse volumes.
The normal read path reports these through ocfs2_error(), matching the
existing suballoc-slot, inline-data, chain-list, and refcount checks. The
online filecheck path uses the same structural predicates but keeps its
own reporting contract, returning OCFS2_FILECHECK_ERR_INVALIDINO instead
of calling ocfs2_error().
This patch (of 3):
ocfs2_validate_inode_block() currently accepts any non-zero i_mode value.
ocfs2_populate_inode() then copies that mode verbatim into inode->i_mode
and dispatches on i_mode & S_IFMT to the file/dir/symlink/special_file
iops; an unrecognised type falls through to ocfs2_special_file_iops and
init_special_inode().
Reject dinodes whose type bits do not name one of the seven canonical
POSIX file types. Use fs_umode_to_ftype(), the same generic file-type
conversion helper OCFS2 already uses for directory entries, so the
accepted inode type set matches the kernel file-type vocabulary instead of
open-coding a local switch.
Apply the same structural check to the online filecheck read path.
filecheck keeps its own error namespace, so it reports malformed i_mode
through the filecheck logger and OCFS2_FILECHECK_ERR_INVALIDINO instead of
calling ocfs2_error(), but it must not allow a malformed dinode to proceed
into ocfs2_populate_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: thunderbolt: Fix frags[] overflow by bounding frame_count
tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The
first frame goes into the skb linear area and every further frame is added as
a page fragment.
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
page, hdr_size, frame_size,
TBNET_RX_PAGE_SIZE - hdr_size);
A packet of frame_count frames therefore ends up with frame_count - 1
fragments. tbnet_check_frame() only bounds the peer supplied frame_count to
TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A
peer that sends a packet of 19 or more small frames pushes nr_frags past
MAX_SKB_FRAGS, so skb_add_rx_frag() writes past skb_shinfo()->frags[] and
corrupts memory after the shared info.
Tighten the start of packet bound to MAX_SKB_FRAGS + 1 so a packet can never
produce more fragments than frags[] can hold. This matches the recent skb
frags overflow fixes in other receive paths, for example f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") and 600dc40554dc
("net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()"). |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Restore SST-PP control to all domains
The SST-PP control offset is only restored to power domain 0 after
resume. During suspend, control values are read and stored for all
power domains.
Use pd_info->sst_base instead of power_domain_info->sst_base, which
only points to power domain 0 base address. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (IRQ)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the
interrupt-driven block-read state machine rejects it as -EPROTO. Worse,
it returns without a NACK+STOP: the next receive cycle has already
started, so the target keeps holding SDA and the bus stays stuck until a
power cycle of this i2c controller.
Accept count=0: NACK the in-flight dummy byte (TXAK) and set msg->len to
2 so i2c_imx_isr_read_continue() emits STOP via its normal last-byte
path. The dummy byte is discarded; block-read callers only consume
buf[0..count-1].
Reading I2DR has likewise already armed the next byte on the
count > I2C_SMBUS_BLOCK_MAX error path, so NACK it (TXAK) before aborting
with -EPROTO; otherwise the failing transfer's STOP cannot complete and
the bus stays held.
The atomic path regressed earlier (v3.16) and is fixed separately; this
patch covers only the v6.13 state-machine rework. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: nat_keepalive: avoid double free on send error
nat_keepalive_send() frees the keepalive skb whenever the IPv4 or IPv6
send helper reports an error.
That cleanup is only correct before the skb is handed to the output
path. Once ip_build_and_send_pkt() or ip6_xmit() takes ownership, the
networking stack may already have consumed the skb before returning an
error, so freeing it again is unsafe.
Handle the pre-handoff failure cases inside nat_keepalive_send_ipv4()
and nat_keepalive_send_ipv6(), where the caller still owns the skb, and
keep nat_keepalive_send() responsible only for family dispatch and the
unsupported-family cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: don't increment hash_offset twice
hash_offset is already incremented in the loop "for (i = 0; i < to_copy;
i++, ts--)". Do not increment it again. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: reload ip header after head reallocation
__ip_vs_get_out_rt() calls skb_ensure_writable() which may
reallocate skb->head. |
| A security vulnerability has been detected in GL.iNet BE9300 and MT6000 4.8.x. This vulnerability affects unknown code of the component Firewall-management RPC. The manipulation of the argument dest_port/dest_ip leads to os command injection. The attack may be initiated remotely. Upgrading to version 4.9.0 is able to resolve this issue. The affected component should be upgraded. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." |
| A vulnerability was detected in Alaev SEO Tools Extension up to 1.0.10 on Chrome. This impacts the function addDiv of the file src/popup.html of the component Popup UI. Performing a manipulation results in basic cross site scripting. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in motogadget mo.lock Ignition Lock up to 20251125. Affected by this vulnerability is an unknown functionality of the component NFC Handler. Executing a manipulation can lead to use of hard-coded cryptographic key
. The physical device can be targeted for the attack. A high complexity level is associated with this attack. The exploitation appears to be difficult. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in SourceCodester Best Employee Management System 1.0. This affects an unknown function of the file /assets/uploadImage/Profile/. Such manipulation leads to exposure of information through directory listing. It is possible to launch the attack remotely. |
| A weakness has been identified in Adblock for Youtube Extension up to 7.2.1 on Chrome. The impacted element is the function updateDynamicRules of the file contentscript.js of the component Event Listener. This manipulation of the argument yt-anti-adblock-detected causes improper authorization. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in jkawamoto mcp-florence2 up to 0.3.13. Affected by this issue is the function get_images of the file src/mcp_florence2/__init__.py. This manipulation of the argument src causes server-side request forgery. The attack may be initiated remotely. The exploit has been published and may be used. It is recommended to change the configuration settings. The vendor explains: "For deployments where SSRF protection is required, I recommend routing all HTTP(S) requests through an SSRF-safe proxy server. This approach mitigates the vulnerability without requiring changes to the mcp-florence2 source code." |
| A security flaw has been discovered in Open Asset Import Library Assimp 17c12da. Impacted is the function Assimp::Compression::decompressBlock of the file code/Common/Compression.cpp of the component File Parser. Performing a manipulation results in heap-based buffer overflow. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was detected in Open Asset Import Library Assimp 17c12da. This affects the function Assimp::MDLImporter::AddBonesToNodeGraph_3DGS_MDL7 of the file code/AssetLib/MDL/MDLLoader.cpp of the component Node Parser. The manipulation of the argument bones_num results in heap-based buffer overflow. The attack can be executed remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw has been found in jiantao88 android-mcp-server up to cfb872b2446794193b58edd63f4dbf6af48a6292. The impacted element is the function child_process.exec of the file build/index.js of the component Command Execution. Executing a manipulation of the argument deviceId/packageName/permission/extras[].key/extras[].value can lead to os command injection. It is possible to launch the attack on the local host. The exploit has been published and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. This patch is called 14e2bf27c88ba137e35cbb0c2a75f72b595bb98a. It is advisable to implement a patch to correct this issue. |
