| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| nimiq-account contains account primitives to be used in Nimiq's Rust implementation. Prior to version 1.3.0, `VestingContract::can_change_balance` returns `AccountError::InsufficientFunds` when `new_balance < min_cap`, but it constructs the error using `balance: self.balance - min_cap`. `Coin::sub` panics on underflow, so if an attacker can reach a state where `min_cap > balance`, the node crashes while trying to return an error. The `min_cap > balance` precondition is attacker-reachable because the vesting contract creation data (32-byte format) allows encoding `total_amount` without validating `total_amount <= transaction.value` (the real contract balance). After creating such a vesting contract, the attacker can broadcast an outgoing transaction to trigger the panic during mempool admission and block processing. The patch for this vulnerability is included as part of v1.3.0. No known workarounds are available. |
| Nimiq's network-libp2p is a Nimiq network implementation based on libp2p. Prior to version 1.3.0, `network-libp2p` discovery uses a libp2p `ConnectionHandler` state machine. the handler assumes there is at most one inbound and one outbound discovery substream per connection. if a remote peer opens/negotiate the discovery protocol substream a second time on the same connection, the handler hits a `panic!(\"Inbound already connected\")` / `panic!(\"Outbound already connected\")` path instead of failing closed. This causes a remote crash of the networking task (swarm), taking the node's p2p networking offline until restart. The patch for this vulnerability is formally released as part of v1.3.0. No known workarounds are available. |
| nimiq-libp2p is a Nimiq network implementation based on libp2p. Prior to version 1.3.0, `MessageCodec::read_request` and `read_response` call `read_to_end()` on inbound substreams, so a remote peer can send only a partial frame and keep the substream open. because `Behaviour::new` also sets `with_max_concurrent_streams(1000)`, the node exposes a much larger stalled-slot budget than the library default. The patch for this vulnerability is formally released as part of v1.3.0. No known workarounds are available. |
| nimiq-block contains block primitives to be used in Nimiq's Rust implementation. `SkipBlockProof::verify` computes its quorum check using `BitSet.len()`, then iterates `BitSet` indices and casts each `usize` index to `u16` (`slot as u16`) for slot lookup. Prior to version 1.3.0, if an attacker can get a `SkipBlockProof` verified where `MultiSignature.signers` contains out-of-range indices spaced by 65536, these indices inflate `len()` but collide onto the same in-range `u16` slot during aggregation. This makes it possible for a malicious validator with far fewer than `2f+1` real signer slots to pass skip block proof verification by multiplying a single BLS signature by the same factor. The patch for this vulnerability is included as part of v1.3.0. No known workarounds are available. |
| nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Prior to version 1.3.0, an untrusted peer could crash a validator by publishing a signed tendermint proposal message where signer == validators.num_validators(). ProposalSender::send uses > instead of >= for the signer bounds check, so the equality case passes and reaches validators.get_validator_by_slot_band(signer), which panics with an out-of-bounds index before any signature verification runs. This issue has been fixed in version 1.3.0. |
| nimiq-blockchain provides persistent block storage for Nimiq's Rust implementation. In 1.3.0 and earlier, block timestamp validation enforces that timestamp >= parent.timestamp for non-skip blocks and timestamp == parent.timestamp + MIN_PRODUCER_TIMEOUT for skip blocks, but there is no visible upper bound check against the wall clock. A malicious block-producing validator can set block timestamps arbitrarily far in the future. This directly affects reward calculations via Policy::supply_at() and batch_delay() in blockchain/src/reward.rs, inflating the monetary supply beyond the intended emission schedule. |
| nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. In versions 1.2.2 and below, an unauthenticated p2p peer can cause the RequestMacroChain message handler task to panic. Sending a RequestMacroChain message where the first locator hash on the victim’s main chain is a micro block hash (not a macro block hash) causes said panic. The RequestMacroChain::handle handler selects the locator based only on "is on main chain", then calls get_macro_blocks() and panics via .unwrap() when the selected hash is not a macro block (BlockchainError::BlockIsNotMacro). This issue has been fixed in version 1.3.0. |
| nimiq-transaction provides the transaction primitive to be used in Nimiq's Rust implementation. Prior to version 1.3.0, the staking contract accepts `UpdateValidator` transactions that set `new_voting_key=Some(...)` while omitting `new_proof_of_knowledge`. this skips the proof-of-knowledge requirement that is needed to prevent BLS rogue-key attacks when public keys are aggregated. Because tendermint macro block justification verification aggregates validator voting keys and verifies a single aggregated BLS signature against that aggregate public key, a rogue-key voting key in the validator set can allow an attacker to forge a quorum-looking justification while only producing a single signature. While the impact is critical, the exploitability is low: The voting keys are fixed for the epoch, so the attacker would need to know the next epoch validator set (chosen through VRF), which is unlikely. The patch for this vulnerability is included as part of v1.3.0. No known workarounds are available. |
| Missing Authorization vulnerability in Themeum Tutor LMS tutor allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Tutor LMS: from n/a through <= 3.9.5. |
| Missing Authorization vulnerability in inseriswiss inseri core inseri-core allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects inseri core: from n/a through <= 1.0.5. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in ThemeGoods Photography photography allows DOM-Based XSS.This issue affects Photography: from n/a through < 7.7.6. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in ThemeGoods Architecturer architecturer allows Reflected XSS.This issue affects Architecturer: from n/a through < 3.9.5. |
| Missing Authorization vulnerability in designthemes DesignThemes Directory Addon designthemes-directory-addon allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects DesignThemes Directory Addon: from n/a through <= 1.8. |
| Missing Authorization vulnerability in Brainstorm_Force Ultimate Addons for WPBakery Page Builder ultimate_vc_addons allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Ultimate Addons for WPBakery Page Builder: from n/a through <= 3.21.1. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in AncoraThemes Greenville greenville allows PHP Local File Inclusion.This issue affects Greenville: from n/a through <= 1.3.2. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in jwsthemes StreamVid streamvid allows PHP Local File Inclusion.This issue affects StreamVid: from n/a through < 6.8.6. |
| BSV Ruby SDK is the Ruby SDK for the BSV blockchain. From 0.3.1 to before 0.8.2, BSV::Wallet::WalletClient#acquire_certificate persists certificate records to storage without verifying the certifier's signature over the certificate contents. In acquisition_protocol: 'direct', the caller supplies all certificate fields (including signature:) and the record is written to storage verbatim. In acquisition_protocol: 'issuance', the client POSTs to a certifier URL and writes whatever signature the response body contains, also without verification. An attacker who can reach either API (or who controls a certifier endpoint targeted by the issuance path) can forge identity certificates that subsequently appear authentic to list_certificates and prove_certificate. |
| Thymeleaf is a server-side Java template engine for web and standalone environments. Versions 3.1.3.RELEASE and prior contain a security bypass vulnerability in the expression execution mechanisms. Although the library provides mechanisms to prevent expression injection, it fails to properly restrict the scope of accessible objects, allowing specific potentially sensitive objects to be reached from within a template. If an application developer passes unvalidated user input directly to the template engine, an unauthenticated remote attacker can bypass the library's protections to achieve Server-Side Template Injection (SSTI). This issue has ben fixed in version 3.1.4.RELEASE. |
| Thymeleaf is a server-side Java template engine for web and standalone environments. Versions 3.1.3.RELEASE and prior contain a security bypass vulnerability in the the expression execution mechanisms. Although the library provides mechanisms to prevent expression injection, it fails to properly neutralize specific syntax patterns that allow for the execution of unauthorized expressions. If an application developer passes unvalidated user input directly to the template engine, an unauthenticated remote attacker can bypass the library's protections to achieve Server-Side Template Injection (SSTI). This issue has ben fixed in version 3.1.4.RELEASE. |
| monetr is a budgeting application for recurring expenses. In versions 1.12.3 and below, the public Stripe webhook endpoint buffers the entire request body into memory before validating the Stripe signature. A remote unauthenticated attacker can send oversized POST payloads to cause uncontrolled memory growth, leading to denial of service. The issue affects deployments with Stripe webhooks enabled and is mitigated if an upstream proxy enforces a request body size limit. This issue has been fixed in version 1.12.4. |
