| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: Add validation for used length
This adds validation for used length (might come
from an untrusted device) to avoid data corruption
or loss. |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: Fix races between xattr_{set|get} and listxattr operations
UBIFS may occur some problems with concurrent xattr_{set|get} and
listxattr operations, such as assertion failure, memory corruption,
stale xattr value[1].
Fix it by importing a new rw-lock in @ubifs_inode to serilize write
operations on xattr, concurrent read operations are still effective,
just like ext4.
[1] https://lore.kernel.org/linux-mtd/20200630130438.141649-1-houtao1@huawei.com |
| In the Linux kernel, the following vulnerability has been resolved:
spi: bcm2835: Fix out-of-bounds access with more than 4 slaves
Commit 571e31fa60b3 ("spi: bcm2835: Cache CS register value for
->prepare_message()") limited the number of slaves to 3 at compile-time.
The limitation was necessitated by a statically-sized array prepare_cs[]
in the driver private data which contains a per-slave register value.
The commit sought to enforce the limitation at run-time by setting the
controller's num_chipselect to 3: Slaves with a higher chipselect are
rejected by spi_add_device().
However the commit neglected that num_chipselect only limits the number
of *native* chipselects. If GPIO chipselects are specified in the
device tree for more than 3 slaves, num_chipselect is silently raised by
of_spi_get_gpio_numbers() and the result are out-of-bounds accesses to
the statically-sized array prepare_cs[].
As a bandaid fix which is backportable to stable, raise the number of
allowed slaves to 24 (which "ought to be enough for anybody"), enforce
the limitation on slave ->setup and revert num_chipselect to 3 (which is
the number of native chipselects supported by the controller).
An upcoming for-next commit will allow an arbitrary number of slaves. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Correct the length check which causes memory corruption
We've suffered from severe kernel crashes due to memory corruption on
our production environment, like,
Call Trace:
[1640542.554277] general protection fault: 0000 [#1] SMP PTI
[1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G
[1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190
[1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286
[1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX:
0000000006e931bf
[1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI:
ffff9a45ff004300
[1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09:
0000000000000000
[1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12:
ffffffff9a20608d
[1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15:
696c662f65636976
[1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000)
knlGS:0000000000000000
[1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4:
00000000003606e0
[1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[1640542.566742] Call Trace:
[1640542.567009] anon_vma_clone+0x5d/0x170
[1640542.567417] __split_vma+0x91/0x1a0
[1640542.567777] do_munmap+0x2c6/0x320
[1640542.568128] vm_munmap+0x54/0x70
[1640542.569990] __x64_sys_munmap+0x22/0x30
[1640542.572005] do_syscall_64+0x5b/0x1b0
[1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[1640542.575642] RIP: 0033:0x7f45d6e61e27
James Wang has reproduced it stably on the latest 4.19 LTS.
After some debugging, we finally proved that it's due to ftrace
buffer out-of-bound access using a debug tool as follows:
[ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000
[ 86.780806] no_context+0xdf/0x3c0
[ 86.784327] __do_page_fault+0x252/0x470
[ 86.788367] do_page_fault+0x32/0x140
[ 86.792145] page_fault+0x1e/0x30
[ 86.795576] strncpy_from_unsafe+0x66/0xb0
[ 86.799789] fetch_memory_string+0x25/0x40
[ 86.804002] fetch_deref_string+0x51/0x60
[ 86.808134] kprobe_trace_func+0x32d/0x3a0
[ 86.812347] kprobe_dispatcher+0x45/0x50
[ 86.816385] kprobe_ftrace_handler+0x90/0xf0
[ 86.820779] ftrace_ops_assist_func+0xa1/0x140
[ 86.825340] 0xffffffffc00750bf
[ 86.828603] do_sys_open+0x5/0x1f0
[ 86.832124] do_syscall_64+0x5b/0x1b0
[ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9
commit b220c049d519 ("tracing: Check length before giving out
the filter buffer") adds length check to protect trace data
overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent
overflow entirely, the length check should also take the sizeof
entry->array[0] into account, since this array[0] is filled the
length of trace data and occupy addtional space and risk overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()
When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass
the requests to the adapter. If such an attempt fails, a local "fail_msg"
string is set and a log message output. The job is then added to a
completions list for cancellation.
Processing of any further jobs from the txq list continues, but since
"fail_msg" remains set, jobs are added to the completions list regardless
of whether a wqe was passed to the adapter. If successfully added to
txcmplq, jobs are added to both lists resulting in list corruption.
Fix by clearing the fail_msg string after adding a job to the completions
list. This stops the subsequent jobs from being added to the completions
list unless they had an appropriate failure. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: fix an incorrect limit in filelayout_decode_layout()
The "sizeof(struct nfs_fh)" is two bytes too large and could lead to
memory corruption. It should be NFS_MAXFHSIZE because that's the size
of the ->data[] buffer.
I reversed the size of the arguments to put the variable on the left. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix data stream corruption
Maxim reported several issues when forcing a TCP transparent proxy
to use the MPTCP protocol for the inbound connections. He also
provided a clean reproducer.
The problem boils down to 'mptcp_frag_can_collapse_to()' assuming
that only MPTCP will use the given page_frag.
If others - e.g. the plain TCP protocol - allocate page fragments,
we can end-up re-using already allocated memory for mptcp_data_frag.
Fix the issue ensuring that the to-be-expanded data fragment is
located at the current page frag end.
v1 -> v2:
- added missing fixes tag (Mat) |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix sk_forward_memory corruption on retransmission
MPTCP sk_forward_memory handling is a bit special, as such field
is protected by the msk socket spin_lock, instead of the plain
socket lock.
Currently we have a code path updating such field without handling
the relevant lock:
__mptcp_retrans() -> __mptcp_clean_una_wakeup()
Several helpers in __mptcp_clean_una_wakeup() will update
sk_forward_alloc, possibly causing such field corruption, as reported
by Matthieu.
Address the issue providing and using a new variant of blamed function
which explicitly acquires the msk spin lock. |
| A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiSandbox 5.0.0 through 5.0.5, FortiSandbox 4.4.0 through 4.4.8, FortiSandbox 4.2 all versions, FortiSandbox Cloud 5.0.4 through 5.0.5, FortiSandbox PaaS 5.0.4 through 5.0.5 may allow an unauthenticated attacker to execute unauthorized commands via specifically crafted HTTP requests |
| An OS command injection vulnerability in Ivanti EPMM before 12.9.0.1, 12.8.0.3 and 12.7.0.2 versions allows a remote authenticated attacker to execute arbitrary commands as root |
| Out of bounds read and write in ANGLE in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Low) |
| A vulnerability in the Xerte Online Tools allows for RCE through the antivirus binary path in the tools server settings, which can be changed to a PHP interpreter, allowing an attacker to upload PHP data that will then be executed. |
| Out of bounds read and write in V8 in Google Chrome prior to 150.0.7871.128 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds read and write in ANGLE in Google Chrome on Android prior to 150.0.7871.182 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| An issue in Unistal Systems Pvt. Ltd.Protegent 360 v2.0.0.4 allows a local attacker to escalate privileges via the kernel driver pgsecdl.sys |
| An issue in Unistal Systems Pvt. Ltd.Protegent 360 v2.0.0.4 allows a local attacker to escalate privileges via the sub_186f4 function |
| An issue in Unistal Systems Pvt. Ltd.Protegent 360 v2.0.0.4 allows a local attacker to escalate privileges via the kernel driver pgsecdl.sys |
| A flaw has been found in Wavlink WL-NU516U1 708c073-mt7628. The impacted element is an unknown function of the component Config Import. Executing a manipulation of the argument Password can lead to os command injection. The attack may be launched remotely. This attack is characterized by high complexity. The exploitability is regarded as difficult. The exploit has been published and may be used. It is advisable to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| Wazuh workflows before 44bf114 contain a shell injection vulnerability in GitHub Actions that allows attackers to execute arbitrary commands by submitting pull requests with crafted VERSION.json files. Attackers can inject shell metacharacters into environment variables that are directly interpolated into run steps, enabling command execution and exfiltration of secrets including GITHUB_TOKEN and AWS credentials on self-hosted runners. |
| Premiere Pro is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
