| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Enforce a recursion limit in Unmarshal to prevent stack exhaustion when parsing deeply-nested, recursive structures. |
| js-yaml is a JavaScript YAML parser and dumper. From 5.0.0 until 5.2.2, parsing a small YAML document can take exponential time when an application calls load() or loadAll() on untrusted input. In src/parser/parser.ts, readFlowCollection uses restoreState and calls parseNode a second time when a flow-sequence entry is recognized as a key: value pair. If the key is a nested flow sequence of the same shape, every level is parsed twice, causing O(2^n) work and allowing an input under 200 bytes to keep one CPU busy for minutes, block the Node.js event loop, and stall the process. No anchors, aliases, merges, tags, or nondefault options are required. This issue is fixed in version 5.2.2. |
| @hono/node-server allows running the Hono application on Node.js. From 2.0.0 until 2.0.10, a WebSocket upgrade request to an upgradeWebSocket route with a missing or malformed Sec-WebSocket-Key header causes src/websocket.ts to retain the request's IncomingMessage in waiterMap and leave waitForWebSocket pending because ws.handleUpgrade emits no connection event. The aborted handshake therefore has no cleanup path, allowing an unauthenticated attacker to flood a public route, cause unbounded memory growth, and eventually make the service unavailable. This issue is fixed in version 2.0.10. |
| rsync before 3.5.0 contains an algorithmic complexity vulnerability in the hash_search() function that allows a remote attacker to cause a denial of service by delivering a carefully constructed file list. A sender can exploit the quadratic-time worst-case behavior in hash lookups to exhaust receiver CPU resources with a modest number of crafted entries, causing a sustained denial of service. |
| A vulnerability was found in TRENDnet TEW-816DRM GURNC4.OT182B-C-TN-R1B028-US.EN. This impacts an unknown function of the file /etc/bftpd.conf of the component bftpd. The manipulation of the argument USERLIMIT_GLOBAL results in allocation of resources. It is possible to launch the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer. |
| CAI Content Credentials is affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction. |
| CAI Content Credentials is affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction. |
| CAI Content Credentials is affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction. |
| py-libp2p is the Python implementation of the libp2p networking stack. In 0.7.0 and earlier, the yamux handle_incoming() method in libp2p/stream_muxer/yamux/yamux.py reads an attacker-controlled 32-bit DATA frame length with read_exactly() before validating it against MAX_WINDOW_SIZE or checking whether stream_id exists. A peer that completes the standard Noise handshake can send a 12-byte frame declaring a 0xFFFFFFFF body and then withhold the body, causing the sequential yamux read loop used by the default new_host() configuration to block and preventing every stream on that connection from making progress. No fixed version is available as of this review. |
| An attacker can cause uncontrolled memory usage with excessive bracing over IMAP. The fix in CVE-2026-27857 was incomplete, only blocking one way of doing this, so there was still another way left open. In particular, the fix was for closing braces, but you could still use open braces to bypass the limit. Using excessive bracing, attacker can cause memory usage up to configured memory limit. Install fixed version, or configure vsz_limit for imap process to low value. No publicly available exploits are known. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: sca3000: Fix a resource leak in sca3000_probe()
spi->irq from request_threaded_irq() not released when
iio_device_register() fails. Add an return value check and jump to a
common error handler when iio_device_register() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, the JSON utility parser in org.hl7.fhir.utilities.json.parser.JsonParser enforces no maximum nesting depth for arrays or objects. As a result, a small but deeply nested, syntactically valid FHIR JSON document can trigger unbounded readArray() or readObject() recursion, raising a StackOverflowError before structural validation runs. An attacker who can submit JSON resources for validation can thus crash the request thread, and services that do not isolate StackOverflowError safely may experience worker loss or process instability — a denial-of-service condition. This issue is fixed in version 6.9.11. |
| Klever-Go is the Go implementation of the Klever blockchain protocol. In versions prior to 1.7.18, the account-data trie syncers are vulnerable to a resource-exhaustion flaw that leaks bounded throttler slots on error paths. In syncDataTrie() (in both userAccountsSyncer.go and kappAccountsSyncer.go), StartProcessing() reserves a slot from the NumGoRoutinesThrottler, but the corresponding EndProcessing() is only called on the success path and on the duplicate-root early return. As a result, any error from trie.NewTrie(), trie.NewTrieSyncer(), or trieSyncer.StartSyncing() (including the network-dependent timeout path) permanently consumes one slot for the lifetime of the throttler. An attacker who can repeatedly cause trie-node sync failures or timeouts during bootstrap can exhaust the bounded throttler, after which further account-data trie syncs stop making progress and SyncAccounts() returns a timeout. Because epoch bootstrap in syncUserAccountsState() and syncKappAccountsState() aborts on any such error, this causes bootstrap to fail, a core availability issue affecting fresh, restarting, or resyncing nodes and validators. This issue is fixed in version 1.7.18. |
| A weakness has been identified in Almico Speedfan 4.52. This affects the function KiSystemCall64 in the library speedfan.sys of the component MSR Index Handler. Executing a manipulation can lead to memory leak. The attack can only be executed locally. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssm-prueth: fix eth_ports_node leak in probe
The error path on of_property_read_u32() failure inside
icssm_prueth_probe() returns without putting eth_ports_node,
which was acquired before the for_each_child_of_node() loop.
Drop it before returning. |
| Shescape is a simple shell escape library for JavaScript. From 2.1.11 until 2.1.14 and 3.0.1, the flag-protection loop in compose in src/internal/compose.js repeatedly joins and slices flag fragments when flagProtection is enabled, which is the default, making processing quadratic in input size across the escape, escapeAll, quote, and quoteAll APIs. An attacker who can supply a large untrusted input containing many flag fragments can consume CPU and cause denial of service. This issue is fixed in versions 2.1.14 and 3.0.1. |
| Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.17.0, turnports_allocate_even() in src/apps/relay/turn_ports.c marks the unused odd sibling port as TPS_TAKEN_ODD for an EVEN-PORT Allocate request with reservation bit R=0 even though no RTCP socket will release it, allowing an authenticated client to permanently exhaust the relay port pool and cause subsequent allocations to fail with STUN error 508. This issue is fixed in version 4.17.0. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: fix spinlock leak in migrate_vma_insert_huge_pmd_page
When check_stable_address_space() fails after the PMD spinlock has
been acquired via pmd_lock(), the code jumps directly to the abort
label, bypassing the spin_unlock() call in unlock_abort. This causes
the PMD spinlock to be permanently held, leading to a deadlock.
Change the goto target from abort to unlock_abort to ensure the
spinlock is always released on this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Do not allow deleting local storage in NMI
Currently, local storage may deadlock when deferring freeing selem or
local storage through kfree_rcu(), call_rcu() or call_rcu_tasks_trace()
in NMI or reentrant. Since deleting selem in NMI is an unlikely use
case, partially mitigate it by returning error when calling from
bpf_xxx_storage_delete() helpers in NMI. Note that, it is still possible
to deadlock through reentrant. A full mitigation requires returning
error when irqs_disabled() is true, which, however is too heavy-handed
for bpf_xxx_storage_delete().
The long-term solution requires _nolock versions of call_rcu. Another
possible solution is to defer the free through irq_work [0], but it
would grow the size of selem, which is non-ideal.
The check is only needed in bpf_selem_unlink(), which is used by helpers
and syscalls. bpf_selem_unlink_nofail() is fine as it is called during
map and owner tear down that never run in NMI or reentrant.
[0] https://lore.kernel.org/bpf/20260205190233.912-1-alexei.starovoitov@gmail.com/ |
