| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling
In non-MSI-X mode (such as legacy INTx or single MSI), wx->msix_entry is
not allocated or initialized. Calling NGBE_INTR_MISC(wx) dereferences
wx->msix_entry->entry, leading to a NULL pointer dereference crash.
This issue was introduced by fixing the IRQ vector when the number of
VFs is 7. Fix the issue by explicitly checking `pdev->msix_enabled` to
determine the correct vector index.
Additionally, as a side fix, set the interrupt mask to BIT(0) for the
non-MSI-X fallback. In MSI/INTx mode, the MISC and queue interrupts
share vector 0, and the WX_PX_MISC_IVAR register is only valid in the
MSI-X case. Thus, BIT(0) is the correct mask for the miscellaneous cause
when MSI-X is disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: publish GC-visible tuple last
nf_flow_table_iterate() only treats original-direction tuple nodes as
owning entries. Publishing the original node first lets GC observe and
free a flow while flow_offload_add() is still inserting the reply node.
Publish the reply node first and the original node last so GC never
sees a partially installed flow.
KASAN can trigger slab-use-after-free read and write reports in the
flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del,
flow_offload_lookup, etc.). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer
rmi_f54_work() reads a diagnostics report from the device into
f54->report_data, sizing the transfer with rmi_f54_get_report_size():
report_size = rmi_f54_get_report_size(f54);
...
for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
int size = min(F54_REPORT_DATA_SIZE, report_size - i);
...
rmi_read_block(.., f54->report_data + i, size);
}
report_data is allocated once at probe from F54's own electrode counts
(array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))),
but rmi_f54_get_report_size() computes the size from
drv_data->num_*_electrodes when those are set, i.e. from the F55
function's electrode counts. Both counts come straight from device
queries (F54 and F55 each report up to 255 electrodes) and nothing
constrains the F55 counts to the F54 ones.
A malicious or malfunctioning RMI4 device that reports larger F55
electrode counts than its F54 counts makes report_size exceed the
allocation, so the read loop writes past report_data (and the V4L2
dequeue memcpy() then reads past it). On conforming hardware the F55
configured electrodes are a subset of the F54 physical electrodes, so
report_size never exceeds the buffer and well-behaved devices are
unaffected.
Record the allocation size and reject a report that does not fit,
mirroring the existing zero-size check. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - zero report size on F54 work error
In rmi_f54_work(), if an error occurs during report request or command
verification, the code jumped directly to the 'error' label, bypassing
the 'abort' label where f54->report_size was normally zeroed out.
This left f54->report_size containing its previous successful payload
size. If a user then altered the V4L2 format to a smaller size, and a
subsequent run failed, rmi_f54_buffer_queue() would copy the stale,
larger payload size into the shrunken V4L2 buffer, causing a heap
buffer overflow.
Fix this by merging the 'abort' and 'error' labels into a single 'out'
exit path, and ensuring that f54->report_size is always set to 0 on
failure by checking for error and zeroing the local report_size first. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: options: reset DSS fields in case of unexpected size
A remote peer could send a malformed DSS with a wrong size, followed by
another DSS or MPC + Data. In this case, the first suboption will be
ignored, but leaving some fields written, which could lead to
inconsistency or access uninitialized data.
Explicitly reset the fields that could have been modified in case of
unexpected size. |
| In versions of Spring Security's OAuth2 Authorization Server module 7.0.0 through 7.0.4, when Dynamic Client Registration is explicitly enabled, the registration endpoint performs insufficient validation of certain client metadata fields supplied by the registering client. An attacker who possesses a valid Initial Access Token can register a malicious client with crafted metadata, which, depending on server configuration and how the metadata is later rendered or used, may result in Stored Cross-Site Scripting (XSS), Privilege Escalation, or Server-Side Request Forgery (SSRF). |
| A flaw was found in Foreman. The template revision endpoint does not enforce object-level authorization when retrieving an audited template revision. An authenticated, low privileged user with a template-related permission, such as view_ptables, can obtain historical template contents belonging to another organization or location by supplying the corresponding audit ID. This can result in unauthorized disclosure of historical template contents, which may contain sensitive configuration information, credentials, or other secrets. The REST API revision endpoints correctly restrict this lookup. |
| Authorization bypass through User-Controlled key vulnerability in Summit Security Systems AdisyonPro allows Accessing Functionality Not Properly Constrained by ACLs.
This issue affects AdisyonPro: before v5.21.0. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: finish crypto callback cleanup before peer release
Crypto completion callbacks hold both key-slot and peer references. The
peer reference pins the netdev, and dropping the last peer reference can
let netdev unregistration and module removal make progress.
Do not release that peer reference before the callback has finished its
own cleanup. If ovpn_crypto_key_slot_put runs after ovpn_peer_put, it can
schedule an RCU callback backed by module text after ovpn_cleanup
rcu_barrier has already run. The TX error path also freed the remaining
skb after ovpn_peer_put, leaving callback cleanup outside the peer/netdev
lifetime window.
Release the key slot and free any remaining skb first, then drop the peer
reference as the last callback action. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: tas2562: Validate values for volume writes
tas2562_volume_control_put() does not do any validation of the control
value written by userspace, it uses it to look up a value in a fixed
size array which can easily be overflowed and then writes whatever value
it gets back to the device. Add validation that we are loading a value
we have in the array. |
| Unauthenticated PHP Object Injection in Hash Form <= 1.4.1 versions. |
| Unauthenticated Cross Site Request Forgery (CSRF) in GeoDirectory <= 2.8.176 versions. |
| Zbtlink WE1326, WE357, WE5926, WE5926-WD, WE826-Q, WE826-T2, WE826-WD, WG108, and WG3526 firmware 19.1101, Zbtlink WE2426-C firmware 19.1112, Zbtlink WE5926-EC_QP firmware 20.0516, Zbtlink WF3526-P firmware 19.051, CTN720-W1, LF-1541, and MT7620N firmware 19.1101, and WRC1 firmware 20.0622 contain an unauthenticated command injection in the infosrvd service (UDP/9992). A remote unauthenticated attacker can send a crafted UDP packet to execute arbitrary commands as root. The service's authentication uses a hardcoded salt and an all-zero wildcard MAC bypass, rendering it ineffective. |
| Zbtlink L3_V2_8 firmware 3.0.0.4.528, Zbtlink WE826-T2 firmware 19.1101, Zbtlink ZBT-7628 firmware 1.0.0.2.007, Zbtlink ZBT-ZBT7621 firmware 1.0.0.3.001, MoreQuick MQAC-7620, MQAC-7620A, MQAP-7620, MQAP-7620A, and MQAP-7628 firmware 1.0.0.2.000, AP522 firmware 1.0.0.2.014, AP7628 and HC5661A firmware 3.0.0.4.380, APG721B firmware 19.0809, HK300 firmware 1.0.0.2.032, and MAP-N10 firmware 1.0.0.2.044 ship a backdoor command-and-control implant (yunmgrd) reachable over an unauthenticated cleartext UDP channel to a hardcoded C2 server. A remote unauthenticated attacker on the network path can hijack the channel and execute arbitrary commands as root. The attacker can also modify DNS entries, exfiltrate PPPoE credentials, and open reverse SSH tunnels. |
| A vulnerability was identified in blackms aistack up to 1.6.1. Affected by this issue is some unknown functionality of the file src/web/server.ts of the component Static File Handler. Such manipulation of the argument req.url leads to path traversal. The attack can be executed remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix UVD decode image min size calculation
This needs to use pitch instead of width. Also reject pitch
over 4096 to avoid overflow.
(cherry picked from commit b41c8cb12e202b220353332ab87dc01a11f69304) |
| Unauthenticated Privilege Escalation in ACPT (Pro) - Custom Post Types Plugin for WordPress <= 2.0.63 versions. |
| Unauthenticated Cross Site Scripting (XSS) in Realtyna Organic IDX plugin <= 5.4.1 versions. |
| Improper Validation of Specified Index, Position, or Offset in Input vulnerability in Mitsubishi Electric CNC M800V Series M800VW and M800VS, M80V Series M80V and M80VW, M800 Series M800W and M800S, M80 Series M80 and M80W, E80 Series E80, C80 Series C80, and M700V Series M750VW, M720VW, 730VW, M720VS, M730VS, and M750VS, M70V Series M70V, E70 Series E70 allows a remote attacker to cause an out-of-bounds read, resulting in a denial-of-service condition by sending specially crafted packets to TCP port 683. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Limit the number of channel program segments
The processing of channel programs, and the CCWs within them, is done
recursively. As such, there is an arbitrary (but not architectural)
limit to the number of CCWs that can exist in a single channel program.
The vfio-ccw logic breaks these channel programs into segments whenever
it encounters a Transfer-In-Channel (TIC) CCW, and the combined number
of segments count towards the global limit. Impose an equivalent limit
to the number of segments until such logic can be made non-recursive. |
