| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tls: make sure to abort the stream if headers are bogus
Normally we wait for the socket to buffer up the whole record
before we service it. If the socket has a tiny buffer, however,
we read out the data sooner, to prevent connection stalls.
Make sure that we abort the connection when we find out late
that the record is actually invalid. Retrying the parsing is
fine in itself but since we copy some more data each time
before we parse we can overflow the allocated skb space.
Constructing a scenario in which we're under pressure without
enough data in the socket to parse the length upfront is quite
hard. syzbot figured out a way to do this by serving us the header
in small OOB sends, and then filling in the recvbuf with a large
normal send.
Make sure that tls_rx_msg_size() aborts strp, if we reach
an invalid record there's really no way to recover. |
| In the Linux kernel, the following vulnerability has been resolved:
cnic: Fix use-after-free bugs in cnic_delete_task
The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(),
which does not guarantee that the delayed work item 'delete_task' has
fully completed if it was already running. Additionally, the delayed work
item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only
blocks and waits for work items that were already queued to the
workqueue prior to its invocation. Any work items submitted after
flush_workqueue() is called are not included in the set of tasks that the
flush operation awaits. This means that after the cyclic work items have
finished executing, a delayed work item may still exist in the workqueue.
This leads to use-after-free scenarios where the cnic_dev is deallocated
by cnic_free_dev(), while delete_task remains active and attempt to
dereference cnic_dev in cnic_delete_task().
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
cnic_netdev_event() |
cnic_stop_hw() | cnic_delete_task()
cnic_cm_stop_bnx2x_hw() | ...
cancel_delayed_work() | /* the queue_delayed_work()
flush_workqueue() | executes after flush_workqueue()*/
| queue_delayed_work()
cnic_free_dev(dev)//free | cnic_delete_task() //new instance
| dev = cp->dev; //use
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the cyclic delayed work item is properly canceled and that any
ongoing execution of the work item completes before the cnic_dev is
deallocated. Furthermore, since cancel_delayed_work_sync() uses
__flush_work(work, true) to synchronously wait for any currently
executing instance of the work item to finish, the flush_workqueue()
becomes redundant and should be removed.
This bug was identified through static analysis. To reproduce the issue
and validate the fix, I simulated the cnic PCI device in QEMU and
introduced intentional delays — such as inserting calls to ssleep()
within the cnic_delete_task() function — to increase the likelihood
of triggering the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp()
The original code relies on cancel_delayed_work() in otx2_ptp_destroy(),
which does not ensure that the delayed work item synctstamp_work has fully
completed if it was already running. This leads to use-after-free scenarios
where otx2_ptp is deallocated by otx2_ptp_destroy(), while synctstamp_work
remains active and attempts to dereference otx2_ptp in otx2_sync_tstamp().
Furthermore, the synctstamp_work is cyclic, the likelihood of triggering
the bug is nonnegligible.
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
otx2_remove() |
otx2_ptp_destroy() | otx2_sync_tstamp()
cancel_delayed_work() |
kfree(ptp) |
| ptp = container_of(...); //UAF
| ptp-> //UAF
This is confirmed by a KASAN report:
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff88800aa09a18 by task bash/136
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? __pfx___run_timer_base.part.0+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
run_timer_softirq+0xd1/0x190
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 1:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
otx2_ptp_init+0xb1/0x860
otx2_probe+0x4eb/0xc30
local_pci_probe+0xdc/0x190
pci_device_probe+0x2fe/0x470
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__driver_attach+0xd2/0x310
bus_for_each_dev+0xed/0x170
bus_add_driver+0x208/0x500
driver_register+0x132/0x460
do_one_initcall+0x89/0x300
kernel_init_freeable+0x40d/0x720
kernel_init+0x1a/0x150
ret_from_fork+0x10c/0x1a0
ret_from_fork_asm+0x1a/0x30
Freed by task 136:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
otx2_ptp_destroy+0x38/0x80
otx2_remove+0x10d/0x4c0
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0xf8/0x210
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device_locked+0x15/0x30
remove_store+0xcc/0xe0
kernfs_fop_write_iter+0x2c3/0x440
vfs_write+0x871/0xd70
ksys_write+0xee/0x1c0
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled before the otx2_ptp is
deallocated.
This bug was initially identified through static analysis. To reproduce
and test it, I simulated the OcteonTX2 PCI device in QEMU and introduced
artificial delays within the otx2_sync_tstamp() function to increase the
likelihood of triggering the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: smbdirect: validate data_offset and data_length field of smb_direct_data_transfer
If data_offset and data_length of smb_direct_data_transfer struct are
invalid, out of bounds issue could happen.
This patch validate data_offset and data_length field in recv_done. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: smbdirect: verify remaining_data_length respects max_fragmented_recv_size
This is inspired by the check for data_offset + data_length. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix slot write race condition
Parallel concurrent writes to the same zram index result in leaked
zsmalloc handles. Schematically we can have something like this:
CPU0 CPU1
zram_slot_lock()
zs_free(handle)
zram_slot_lock()
zram_slot_lock()
zs_free(handle)
zram_slot_lock()
compress compress
handle = zs_malloc() handle = zs_malloc()
zram_slot_lock
zram_set_handle(handle)
zram_slot_lock
zram_slot_lock
zram_set_handle(handle)
zram_slot_lock
Either CPU0 or CPU1 zsmalloc handle will leak because zs_free() is done
too early. In fact, we need to reset zram entry right before we set its
new handle, all under the same slot lock scope. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-stripe: fix a possible integer overflow
There's a possible integer overflow in stripe_io_hints if we have too
large chunk size. Test if the overflow happened, and if it did, don't set
limits->io_min and limits->io_opt; |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/s390: Fix memory corruption when using identity domain
zpci_get_iommu_ctrs() returns counter information to be reported as part
of device statistics; these counters are stored as part of the s390_domain.
The problem, however, is that the identity domain is not backed by an
s390_domain and so the conversion via to_s390_domain() yields a bad address
that is zero'd initially and read on-demand later via a sysfs read.
These counters aren't necessary for the identity domain; just return NULL
in this case.
This issue was discovered via KASAN with reports that look like:
BUG: KASAN: global-out-of-bounds in zpci_fmb_enable_device
when using the identity domain for a device on s390. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: q6apm-lpass-dais: Fix NULL pointer dereference if source graph failed
If earlier opening of source graph fails (e.g. ADSP rejects due to
incorrect audioreach topology), the graph is closed and
"dai_data->graph[dai->id]" is assigned NULL. Preparing the DAI for sink
graph continues though and next call to q6apm_lpass_dai_prepare()
receives dai_data->graph[dai->id]=NULL leading to NULL pointer
exception:
qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001002 cmd
qcom-apm gprsvc:service:2:1: DSP returned error[1001002] 1
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: fail to start APM port 78
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on TX_CODEC_DMA_TX_3: -22
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
...
Call trace:
q6apm_graph_media_format_pcm+0x48/0x120 (P)
q6apm_lpass_dai_prepare+0x110/0x1b4
snd_soc_pcm_dai_prepare+0x74/0x108
__soc_pcm_prepare+0x44/0x160
dpcm_be_dai_prepare+0x124/0x1c0 |
| In the Linux kernel, the following vulnerability has been resolved:
net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer
Since commit 7d5e9737efda ("net: rfkill: gpio: get the name and type from
device property") rfkill_find_type() gets called with the possibly
uninitialized "const char *type_name;" local variable.
On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752"
acpi_device, the rfkill->type is set based on the ACPI acpi_device_id:
rfkill->type = (unsigned)id->driver_data;
and there is no "type" property so device_property_read_string() will fail
and leave type_name uninitialized, leading to a potential crash.
rfkill_find_type() does accept a NULL pointer, fix the potential crash
by initializing type_name to NULL.
Note likely sofar this has not been caught because:
1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device
2. The stack happened to contain NULL where type_name is stored |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Always pass in an error pointer to __sev_platform_shutdown_locked()
When
9770b428b1a2 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown")
moved the error messages dumping so that they don't need to be issued by
the callers, it missed the case where __sev_firmware_shutdown() calls
__sev_platform_shutdown_locked() with a NULL argument which leads to
a NULL ptr deref on the shutdown path, during suspend to disk:
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 983 Comm: hib.sh Not tainted 6.17.0-rc4+ #1 PREEMPT(voluntary)
Hardware name: Supermicro Super Server/H12SSL-i, BIOS 2.5 09/08/2022
RIP: 0010:__sev_platform_shutdown_locked.cold+0x0/0x21 [ccp]
That rIP is:
00000000000006fd <__sev_platform_shutdown_locked.cold>:
6fd: 8b 13 mov (%rbx),%edx
6ff: 48 8b 7d 00 mov 0x0(%rbp),%rdi
703: 89 c1 mov %eax,%ecx
Code: 74 05 31 ff 41 89 3f 49 8b 3e 89 ea 48 c7 c6 a0 8e 54 a0 41 bf 92 ff ff ff e8 e5 2e 09 e1 c6 05 2a d4 38 00 01 e9 26 af ff ff <8b> 13 48 8b 7d 00 89 c1 48 c7 c6 18 90 54 a0 89 44 24 04 e8 c1 2e
RSP: 0018:ffffc90005467d00 EFLAGS: 00010282
RAX: 00000000ffffff92 RBX: 0000000000000000 RCX: 0000000000000000
^^^^^^^^^^^^^^^^
and %rbx is nice and clean.
Call Trace:
<TASK>
__sev_firmware_shutdown.isra.0
sev_dev_destroy
psp_dev_destroy
sp_destroy
pci_device_shutdown
device_shutdown
kernel_power_off
hibernate.cold
state_store
kernfs_fop_write_iter
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Pass in a pointer to the function-local error var in the caller.
With that addressed, suspending the ccp shows the error properly at
least:
ccp 0000:47:00.1: sev command 0x2 timed out, disabling PSP
ccp 0000:47:00.1: SEV: failed to SHUTDOWN error 0x0, rc -110
SEV-SNP: Leaking PFN range 0x146800-0x146a00
SEV-SNP: PFN 0x146800 unassigned, dumping non-zero entries in 2M PFN region: [0x146800 - 0x146a00]
...
ccp 0000:47:00.1: SEV-SNP firmware shutdown failed, rc -16, error 0x0
ACPI: PM: Preparing to enter system sleep state S5
kvm: exiting hardware virtualization
reboot: Power down
Btw, this driver is crying to be cleaned up to pass in a proper I/O
struct which can be used to store information between the different
functions, otherwise stuff like that will happen in the future again. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codec: sma1307: Fix memory corruption in sma1307_setting_loaded()
The sma1307->set.header_size is how many integers are in the header
(there are 8 of them) but instead of allocating space of 8 integers
we allocate 8 bytes. This leads to memory corruption when we copy data
it on the next line:
memcpy(sma1307->set.header, data,
sma1307->set.header_size * sizeof(int));
Also since we're immediately copying over the memory in ->set.header,
there is no need to zero it in the allocator. Use devm_kmalloc_array()
to allocate the memory instead. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: bridge: anx7625: Fix NULL pointer dereference with early IRQ
If the interrupt occurs before resource initialization is complete, the
interrupt handler/worker may access uninitialized data such as the I2C
tcpc_client device, potentially leading to NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: let recv_done verify data_offset, data_length and remaining_data_length
This is inspired by the related server fixes. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: let smbd_destroy() call disable_work_sync(&info->post_send_credits_work)
In smbd_destroy() we may destroy the memory so we better
wait until post_send_credits_work is no longer pending
and will never be started again.
I actually just hit the case using rxe:
WARNING: CPU: 0 PID: 138 at drivers/infiniband/sw/rxe/rxe_verbs.c:1032 rxe_post_recv+0x1ee/0x480 [rdma_rxe]
...
[ 5305.686979] [ T138] smbd_post_recv+0x445/0xc10 [cifs]
[ 5305.687135] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5
[ 5305.687149] [ T138] ? __kasan_check_write+0x14/0x30
[ 5305.687185] [ T138] ? __pfx_smbd_post_recv+0x10/0x10 [cifs]
[ 5305.687329] [ T138] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 5305.687356] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5
[ 5305.687368] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5
[ 5305.687378] [ T138] ? _raw_spin_unlock_irqrestore+0x11/0x60
[ 5305.687389] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5
[ 5305.687399] [ T138] ? get_receive_buffer+0x168/0x210 [cifs]
[ 5305.687555] [ T138] smbd_post_send_credits+0x382/0x4b0 [cifs]
[ 5305.687701] [ T138] ? __pfx_smbd_post_send_credits+0x10/0x10 [cifs]
[ 5305.687855] [ T138] ? __pfx___schedule+0x10/0x10
[ 5305.687865] [ T138] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 5305.687875] [ T138] ? queue_delayed_work_on+0x8e/0xa0
[ 5305.687889] [ T138] process_one_work+0x629/0xf80
[ 5305.687908] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5
[ 5305.687917] [ T138] ? __kasan_check_write+0x14/0x30
[ 5305.687933] [ T138] worker_thread+0x87f/0x1570
...
It means rxe_post_recv was called after rdma_destroy_qp().
This happened because put_receive_buffer() was triggered
by ib_drain_qp() and called:
queue_work(info->workqueue, &info->post_send_credits_work); |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Set merge to zero early in af_alg_sendmsg
If an error causes af_alg_sendmsg to abort, ctx->merge may contain
a garbage value from the previous loop. This may then trigger a
crash on the next entry into af_alg_sendmsg when it attempts to do
a merge that can't be done.
Fix this by setting ctx->merge to zero near the start of the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path
During tests of another unrelated patch I was able to trigger this
error: Objects remaining on __kmem_cache_shutdown() |
| The Trinity Audio – Text to Speech AI audio player to convert content into audio plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'range-date' parameter in all versions up to, and including, 5.20.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The Trinity Audio – Text to Speech AI audio player to convert content into audio plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 5.20.2. This is due to missing or incorrect nonce validation in the '/admin/inc/post-management.php' file. This makes it possible for unauthenticated attackers to activate/deactivate posts via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| Missing Authorization vulnerability in SALESmanago SALESmanago & Leadoo allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects SALESmanago & Leadoo: from n/a through 3.8.1. |
