| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: core: prevent NULL deref in generic_hwtstamp_ioctl_lower()
The ethtool tsconfig Netlink path can trigger a null pointer
dereference. A call chain such as:
tsconfig_prepare_data() ->
dev_get_hwtstamp_phylib() ->
vlan_hwtstamp_get() ->
generic_hwtstamp_get_lower() ->
generic_hwtstamp_ioctl_lower()
results in generic_hwtstamp_ioctl_lower() being called with
kernel_cfg->ifr as NULL.
The generic_hwtstamp_ioctl_lower() function does not expect
a NULL ifr and dereferences it, leading to a system crash.
Fix this by adding a NULL check for kernel_cfg->ifr in
generic_hwtstamp_ioctl_lower(). If ifr is NULL, return -EINVAL. |
| The gmp plugin in strongSwan before 5.6.0 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via a crafted RSA signature. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: Add checks for devm_kcalloc
As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: megachips: Fix a null pointer dereference bug
When removing the module we will get the following warning:
[ 31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered
[ 31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
[ 31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
[ 31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130
[ 31.921825] Call Trace:
[ 31.922533] stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw]
[ 31.923139] i2c_device_remove+0x181/0x1f0
The two bridges (stdp2690, stdp4028) do not probe at the same time, so
the driver does not call ge_b850v3_resgiter() when probing, causing the
driver to try to remove the object that has not been initialized.
Fix this by checking whether both the bridges are probed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: rely on mt76_connac2_mac_tx_rate_val
In order to fix a possible NULL pointer dereference in
mt7996_mac_write_txwi() of vif pointer, export
mt76_connac2_mac_tx_rate_val utility routine and reuse it
in mt7996 driver. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus_core) Fix NULL pointer dereference
Pass i2c_client to _pmbus_is_enabled to drop the assumption
that a regulator device is passed in.
This will fix the issue of a NULL pointer dereference when called from
_pmbus_get_flags. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211_hwsim: Fix possible NULL dereference
In a call to mac80211_hwsim_select_tx_link() the sta pointer might
be NULL, thus need to check that it is not NULL before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
r5l_flush_stripe_to_raid() will check if the list 'flushing_ios' is
empty, and then submit 'flush_bio', however, r5l_log_flush_endio()
is clearing the list first and then clear the bio, which will cause
null-ptr-deref:
T1: submit flush io
raid5d
handle_active_stripes
r5l_flush_stripe_to_raid
// list is empty
// add 'io_end_ios' to the list
bio_init
submit_bio
// io1
T2: io1 is done
r5l_log_flush_endio
list_splice_tail_init
// clear the list
T3: submit new flush io
...
r5l_flush_stripe_to_raid
// list is empty
// add 'io_end_ios' to the list
bio_init
bio_uninit
// clear bio->bi_blkg
submit_bio
// null-ptr-deref
Fix this problem by clearing bio before clearing the list in
r5l_log_flush_endio(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dsi: Add missing check for alloc_ordered_workqueue
Add check for the return value of alloc_ordered_workqueue as it may return
NULL pointer and cause NULL pointer dereference.
Patchwork: https://patchwork.freedesktop.org/patch/517646/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: drop redundant sched job cleanup when cs is aborted
Once command submission failed due to userptr invalidation in
amdgpu_cs_submit, legacy code will perform cleanup of scheduler
job. However, it's not needed at all, as former commit has integrated
job cleanup stuff into amdgpu_job_free. Otherwise, because of double
free, a NULL pointer dereference will occur in such scenario.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457 |
| In the Linux kernel, the following vulnerability has been resolved:
pnode: terminate at peers of source
The propagate_mnt() function handles mount propagation when creating
mounts and propagates the source mount tree @source_mnt to all
applicable nodes of the destination propagation mount tree headed by
@dest_mnt.
Unfortunately it contains a bug where it fails to terminate at peers of
@source_mnt when looking up copies of the source mount that become
masters for copies of the source mount tree mounted on top of slaves in
the destination propagation tree causing a NULL dereference.
Once the mechanics of the bug are understood it's easy to trigger.
Because of unprivileged user namespaces it is available to unprivileged
users.
While fixing this bug we've gotten confused multiple times due to
unclear terminology or missing concepts. So let's start this with some
clarifications:
* The terms "master" or "peer" denote a shared mount. A shared mount
belongs to a peer group.
* A peer group is a set of shared mounts that propagate to each other.
They are identified by a peer group id. The peer group id is available
in @shared_mnt->mnt_group_id.
Shared mounts within the same peer group have the same peer group id.
The peers in a peer group can be reached via @shared_mnt->mnt_share.
* The terms "slave mount" or "dependent mount" denote a mount that
receives propagation from a peer in a peer group. IOW, shared mounts
may have slave mounts and slave mounts have shared mounts as their
master. Slave mounts of a given peer in a peer group are listed on
that peers slave list available at @shared_mnt->mnt_slave_list.
* The term "master mount" denotes a mount in a peer group. IOW, it
denotes a shared mount or a peer mount in a peer group. The term
"master mount" - or "master" for short - is mostly used when talking
in the context of slave mounts that receive propagation from a master
mount. A master mount of a slave identifies the closest peer group a
slave mount receives propagation from. The master mount of a slave can
be identified via @slave_mount->mnt_master. Different slaves may point
to different masters in the same peer group.
* Multiple peers in a peer group can have non-empty ->mnt_slave_lists.
Non-empty ->mnt_slave_lists of peers don't intersect. Consequently, to
ensure all slave mounts of a peer group are visited the
->mnt_slave_lists of all peers in a peer group have to be walked.
* Slave mounts point to a peer in the closest peer group they receive
propagation from via @slave_mnt->mnt_master (see above). Together with
these peers they form a propagation group (see below). The closest
peer group can thus be identified through the peer group id
@slave_mnt->mnt_master->mnt_group_id of the peer/master that a slave
mount receives propagation from.
* A shared-slave mount is a slave mount to a peer group pg1 while also
a peer in another peer group pg2. IOW, a peer group may receive
propagation from another peer group.
If a peer group pg1 is a slave to another peer group pg2 then all
peers in peer group pg1 point to the same peer in peer group pg2 via
->mnt_master. IOW, all peers in peer group pg1 appear on the same
->mnt_slave_list. IOW, they cannot be slaves to different peer groups.
* A pure slave mount is a slave mount that is a slave to a peer group
but is not a peer in another peer group.
* A propagation group denotes the set of mounts consisting of a single
peer group pg1 and all slave mounts and shared-slave mounts that point
to a peer in that peer group via ->mnt_master. IOW, all slave mounts
such that @slave_mnt->mnt_master->mnt_group_id is equal to
@shared_mnt->mnt_group_id.
The concept of a propagation group makes it easier to talk about a
single propagation level in a propagation tree.
For example, in propagate_mnt() the immediate peers of @dest_mnt and
all slaves of @dest_mnt's peer group form a propagation group pr
---truncated--- |
| In Modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01661199; Issue ID: MSV-4296. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add null pointer check to attr_load_runs_vcn
Some metadata files are handled before MFT. This adds a null pointer
check for some corner cases that could lead to NPD while reading these
metadata files for a malformed NTFS image.
[ 240.190827] BUG: kernel NULL pointer dereference, address: 0000000000000158
[ 240.191583] #PF: supervisor read access in kernel mode
[ 240.191956] #PF: error_code(0x0000) - not-present page
[ 240.192391] PGD 0 P4D 0
[ 240.192897] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 240.193805] CPU: 0 PID: 242 Comm: mount Tainted: G B 5.19.0+ #17
[ 240.194477] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 240.195152] RIP: 0010:ni_find_attr+0xae/0x300
[ 240.195679] Code: c8 48 c7 45 88 c0 4e 5e 86 c7 00 f1 f1 f1 f1 c7 40 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 e2 d9f
[ 240.196642] RSP: 0018:ffff88800812f690 EFLAGS: 00000286
[ 240.197019] RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffffffff85ef037a
[ 240.197523] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff88e95f60
[ 240.197877] RBP: ffff88800812f738 R08: 0000000000000001 R09: fffffbfff11d2bed
[ 240.198292] R10: ffffffff88e95f67 R11: fffffbfff11d2bec R12: 0000000000000000
[ 240.198647] R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000
[ 240.199410] FS: 00007f233c33be40(0000) GS:ffff888058200000(0000) knlGS:0000000000000000
[ 240.199895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 240.200314] CR2: 0000000000000158 CR3: 0000000004d32000 CR4: 00000000000006f0
[ 240.200839] Call Trace:
[ 240.201104] <TASK>
[ 240.201502] ? ni_load_mi+0x80/0x80
[ 240.202297] ? ___slab_alloc+0x465/0x830
[ 240.202614] attr_load_runs_vcn+0x8c/0x1a0
[ 240.202886] ? __kasan_slab_alloc+0x32/0x90
[ 240.203157] ? attr_data_write_resident+0x250/0x250
[ 240.203543] mi_read+0x133/0x2c0
[ 240.203785] mi_get+0x70/0x140
[ 240.204012] ni_load_mi_ex+0xfa/0x190
[ 240.204346] ? ni_std5+0x90/0x90
[ 240.204588] ? __kasan_kmalloc+0x88/0xb0
[ 240.204859] ni_enum_attr_ex+0xf1/0x1c0
[ 240.205107] ? ni_fname_type.part.0+0xd0/0xd0
[ 240.205600] ? ntfs_load_attr_list+0xbe/0x300
[ 240.205864] ? ntfs_cmp_names_cpu+0x125/0x180
[ 240.206157] ntfs_iget5+0x56c/0x1870
[ 240.206510] ? ntfs_get_block_bmap+0x70/0x70
[ 240.206776] ? __kasan_kmalloc+0x88/0xb0
[ 240.207030] ? set_blocksize+0x95/0x150
[ 240.207545] ntfs_fill_super+0xb8f/0x1e20
[ 240.207839] ? put_ntfs+0x1d0/0x1d0
[ 240.208069] ? vsprintf+0x20/0x20
[ 240.208467] ? mutex_unlock+0x81/0xd0
[ 240.208846] ? set_blocksize+0x95/0x150
[ 240.209221] get_tree_bdev+0x232/0x370
[ 240.209804] ? put_ntfs+0x1d0/0x1d0
[ 240.210519] ntfs_fs_get_tree+0x15/0x20
[ 240.210991] vfs_get_tree+0x4c/0x130
[ 240.211455] path_mount+0x645/0xfd0
[ 240.211806] ? putname+0x80/0xa0
[ 240.212112] ? finish_automount+0x2e0/0x2e0
[ 240.212559] ? kmem_cache_free+0x110/0x390
[ 240.212906] ? putname+0x80/0xa0
[ 240.213329] do_mount+0xd6/0xf0
[ 240.213829] ? path_mount+0xfd0/0xfd0
[ 240.214246] ? __kasan_check_write+0x14/0x20
[ 240.214774] __x64_sys_mount+0xca/0x110
[ 240.215080] do_syscall_64+0x3b/0x90
[ 240.215442] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 240.215811] RIP: 0033:0x7f233b4e948a
[ 240.216104] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 240.217615] RSP: 002b:00007fff02211ec8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
[ 240.218718] RAX: ffffffffffffffda RBX: 0000561cdc35b060 RCX: 00007f233b4e948a
[ 240.219556] RDX: 0000561cdc35b260 RSI: 0000561cdc35b2e0 RDI: 0000561cdc363af0
[ 240.219975] RBP: 0000000000000000 R08: 0000561cdc35b280 R09: 0000000000000020
[ 240.220403] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000561cdc363af0
[ 240.220803] R13: 000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param()
Syzkaller reports a null-ptr-deref bug as follows:
======================================================
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:hugetlbfs_parse_param+0x1dd/0x8e0 fs/hugetlbfs/inode.c:1380
[...]
Call Trace:
<TASK>
vfs_parse_fs_param fs/fs_context.c:148 [inline]
vfs_parse_fs_param+0x1f9/0x3c0 fs/fs_context.c:129
vfs_parse_fs_string+0xdb/0x170 fs/fs_context.c:191
generic_parse_monolithic+0x16f/0x1f0 fs/fs_context.c:231
do_new_mount fs/namespace.c:3036 [inline]
path_mount+0x12de/0x1e20 fs/namespace.c:3370
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount fs/namespace.c:3568 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3568
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
</TASK>
======================================================
According to commit "vfs: parse: deal with zero length string value",
kernel will set the param->string to null pointer in vfs_parse_fs_string()
if fs string has zero length.
Yet the problem is that, hugetlbfs_parse_param() will dereference the
param->string, without checking whether it is a null pointer. To be more
specific, if hugetlbfs_parse_param() parses an illegal mount parameter,
such as "size=,", kernel will constructs struct fs_parameter with null
pointer in vfs_parse_fs_string(), then passes this struct fs_parameter to
hugetlbfs_parse_param(), which triggers the above null-ptr-deref bug.
This patch solves it by adding sanity check on param->string
in hugetlbfs_parse_param(). |
| In Modem, there is a possible application crash due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY00628396; Issue ID: MSV-4775. |
| A NULL pointer dereference vulnerability exists in the xpath.c:xmlXPathCompOpEval() function of libxml2 through 2.9.8 when parsing an invalid XPath expression in the XPATH_OP_AND or XPATH_OP_OR case. Applications processing untrusted XSL format inputs with the use of the libxml2 library may be vulnerable to a denial of service attack due to a crash of the application. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/mdp5: Add check for kzalloc
As kzalloc may fail and return NULL pointer,
it should be better to check the return value
in order to avoid the NULL pointer dereference.
Patchwork: https://patchwork.freedesktop.org/patch/514154/ |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: check IFF_UP earlier in Tx path
Xsk Tx can be triggered via either sendmsg() or poll() syscalls. These
two paths share a call to common function xsk_xmit() which has two
sanity checks within. A pseudo code example to show the two paths:
__xsk_sendmsg() : xsk_poll():
if (unlikely(!xsk_is_bound(xs))) if (unlikely(!xsk_is_bound(xs)))
return -ENXIO; return mask;
if (unlikely(need_wait)) (...)
return -EOPNOTSUPP; xsk_xmit()
mark napi id
(...)
xsk_xmit()
xsk_xmit():
if (unlikely(!(xs->dev->flags & IFF_UP)))
return -ENETDOWN;
if (unlikely(!xs->tx))
return -ENOBUFS;
As it can be observed above, in sendmsg() napi id can be marked on
interface that was not brought up and this causes a NULL ptr
dereference:
[31757.505631] BUG: kernel NULL pointer dereference, address: 0000000000000018
[31757.512710] #PF: supervisor read access in kernel mode
[31757.517936] #PF: error_code(0x0000) - not-present page
[31757.523149] PGD 0 P4D 0
[31757.525726] Oops: 0000 [#1] PREEMPT SMP NOPTI
[31757.530154] CPU: 26 PID: 95641 Comm: xdpsock Not tainted 6.2.0-rc5+ #40
[31757.536871] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[31757.547457] RIP: 0010:xsk_sendmsg+0xde/0x180
[31757.551799] Code: 00 75 a2 48 8b 00 a8 04 75 9b 84 d2 74 69 8b 85 14 01 00 00 85 c0 75 1b 48 8b 85 28 03 00 00 48 8b 80 98 00 00 00 48 8b 40 20 <8b> 40 18 89 85 14 01 00 00 8b bd 14 01 00 00 81 ff 00 01 00 00 0f
[31757.570840] RSP: 0018:ffffc90034f27dc0 EFLAGS: 00010246
[31757.576143] RAX: 0000000000000000 RBX: ffffc90034f27e18 RCX: 0000000000000000
[31757.583389] RDX: 0000000000000001 RSI: ffffc90034f27e18 RDI: ffff88984cf3c100
[31757.590631] RBP: ffff88984714a800 R08: ffff88984714a800 R09: 0000000000000000
[31757.597877] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000fffffffa
[31757.605123] R13: 0000000000000000 R14: 0000000000000003 R15: 0000000000000000
[31757.612364] FS: 00007fb4c5931180(0000) GS:ffff88afdfa00000(0000) knlGS:0000000000000000
[31757.620571] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[31757.626406] CR2: 0000000000000018 CR3: 000000184b41c003 CR4: 00000000007706e0
[31757.633648] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[31757.640894] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[31757.648139] PKRU: 55555554
[31757.650894] Call Trace:
[31757.653385] <TASK>
[31757.655524] sock_sendmsg+0x8f/0xa0
[31757.659077] ? sockfd_lookup_light+0x12/0x70
[31757.663416] __sys_sendto+0xfc/0x170
[31757.667051] ? do_sched_setscheduler+0xdb/0x1b0
[31757.671658] __x64_sys_sendto+0x20/0x30
[31757.675557] do_syscall_64+0x38/0x90
[31757.679197] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[31757.687969] Code: 8e f6 ff 44 8b 4c 24 2c 4c 8b 44 24 20 41 89 c4 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b 7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 3a 44 89 e7 48 89 44 24 08 e8 b5 8e f6 ff 48
[31757.707007] RSP: 002b:00007ffd49c73c70 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
[31757.714694] RAX: ffffffffffffffda RBX: 000055a996565380 RCX: 00007fb4c5727c16
[31757.721939] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
[31757.729184] RBP: 0000000000000040 R08: 0000000000000000 R09: 0000000000000000
[31757.736429] R10: 0000000000000040 R11: 0000000000000293 R12: 0000000000000000
[31757.743673] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[31757.754940] </TASK>
To fix this, let's make xsk_xmit a function that will be responsible for
generic Tx, where RCU is handled accordingly and pull out sanity checks
and xs->zc handling. Populate sanity checks to __xsk_sendmsg() and
xsk_poll(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: storvsc: Fix handling of virtual Fibre Channel timeouts
Hyper-V provides the ability to connect Fibre Channel LUNs to the host
system and present them in a guest VM as a SCSI device. I/O to the vFC
device is handled by the storvsc driver. The storvsc driver includes a
partial integration with the FC transport implemented in the generic
portion of the Linux SCSI subsystem so that FC attributes can be displayed
in /sys. However, the partial integration means that some aspects of vFC
don't work properly. Unfortunately, a full and correct integration isn't
practical because of limitations in what Hyper-V provides to the guest.
In particular, in the context of Hyper-V storvsc, the FC transport timeout
function fc_eh_timed_out() causes a kernel panic because it can't find the
rport and dereferences a NULL pointer. The original patch that added the
call from storvsc_eh_timed_out() to fc_eh_timed_out() is faulty in this
regard.
In many cases a timeout is due to a transient condition, so the situation
can be improved by just continuing to wait like with other I/O requests
issued by storvsc, and avoiding the guaranteed panic. For a permanent
failure, continuing to wait may result in a hung thread instead of a panic,
which again may be better.
So fix the panic by removing the storvsc call to fc_eh_timed_out(). This
allows storvsc to keep waiting for a response. The change has been tested
by users who experienced a panic in fc_eh_timed_out() due to transient
timeouts, and it solves their problem.
In the future we may want to deprecate the vFC functionality in storvsc
since it can't be fully fixed. But it has current users for whom it is
working well enough, so it should probably stay for a while longer. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix DFS traversal oops without CONFIG_CIFS_DFS_UPCALL
When compiled with CONFIG_CIFS_DFS_UPCALL disabled, cifs_dfs_d_automount
is NULL. cifs.ko logic for mapping CIFS_FATTR_DFS_REFERRAL attributes to
S_AUTOMOUNT and corresponding dentry flags is retained regardless of
CONFIG_CIFS_DFS_UPCALL, leading to a NULL pointer dereference in
VFS follow_automount() when traversing a DFS referral link:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
Call Trace:
<TASK>
__traverse_mounts+0xb5/0x220
? cifs_revalidate_mapping+0x65/0xc0 [cifs]
step_into+0x195/0x610
? lookup_fast+0xe2/0xf0
path_lookupat+0x64/0x140
filename_lookup+0xc2/0x140
? __create_object+0x299/0x380
? kmem_cache_alloc+0x119/0x220
? user_path_at_empty+0x31/0x50
user_path_at_empty+0x31/0x50
__x64_sys_chdir+0x2a/0xd0
? exit_to_user_mode_prepare+0xca/0x100
do_syscall_64+0x42/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
This fix adds an inline cifs_dfs_d_automount() {return -EREMOTE} handler
when CONFIG_CIFS_DFS_UPCALL is disabled. An alternative would be to
avoid flagging S_AUTOMOUNT, etc. without CONFIG_CIFS_DFS_UPCALL. This
approach was chosen as it provides more control over the error path. |
