| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was detected in TRENDnet TEW-823DRU 1.1.02b01. Impacted is an unknown function of the file /cgi-bin/admin.cgi. The manipulation of the argument Hostname results in command injection. The attack can be launched remotely. The exploit is now public and may be used. |
| A flaw has been found in TRENDnet Router 1.1.02b01. The affected element is an unknown function of the file /cgi-bin/ping.cgi. This manipulation of the argument wan_type causes command injection. The attack may be initiated remotely. The exploit has been published and may be used. |
| Renovate versions from 39.218.0 before 40.33.0 contain an arbitrary command injection vulnerability in the kustomize manager where user-provided chart names are appended to helm pull commands without proper sanitization. Attackers with repository write access can craft malicious kustomization.yaml files with specially crafted chart names to execute arbitrary commands on the Renovate host machine. |
| Renovate versions from 32.135.0 before 40.33.0 contain a command injection vulnerability in the hermit manager where user-provided dependency names are appended to install and uninstall commands without proper sanitization. Attackers with repository write access can provide maliciously named hermit dependencies to execute arbitrary commands on the machine running Renovate. |
| Allocation of Resources Without Limits or Throttling in ZenHive mpp allows an unauthenticated remote client to drain the fee-payer wallet through concurrent sponsored payments, denying service to legitimate payers once it is empty.
MPP.Methods.Tempo.FeePayerPolicy enforces its ceilings (max_gas, max_fee_per_gas, max_priority_fee_per_gas, the worst-case gas_limit * max_fee_per_gas <= max_total_fee budget cap, and a validity window) against one transaction at a time, and nothing accounts for exposure across concurrent requests. reserve_hash_atomic/2 is keyed on the transaction hash, so it prevents duplicate broadcast of the same signed transaction but not N distinct sponsored transactions carrying distinct expiring nonces. Committed sponsor exposure is therefore N times max_total_fee, bounded by nothing in the library, and the default 900 second validity window lets co-signed transactions stay broadcastable and uncounted for that entire period.
This issue affects mpp: from 0.2.0 before 0.12.0. |
| phpMyFAQ versions 3.1.0 through 4.1.6 contain an authentication bypass vulnerability in AuthLdap::create(). When LDAP authentication is enabled, after a successful LDAP bind the code calls User::setStatus('active') unconditionally, which overwrites the account_status column of a pre-existing local account from 'blocked' to 'active'. As a result, a user whose local phpMyFAQ account has been administratively blocked can restore their account and log in by authenticating via LDAP. The state transition is not logged, so administrators cannot detect that the block was overridden. Fixed in 4.1.7. |
| A flaw was found in the GStreamer gst-plugins-good package. The rtph264depay and rtph265depay RTP depayloader elements do not enforce a maximum size limit on the reassembly buffer used during fragmented RTP packet processing. A remote, unauthenticated attacker can send a continuous stream of RTP fragments without ever transmitting an end-of-fragment marker, causing the reassembly buffer to grow without bound until process memory is exhausted. This results in a denial of service through process termination. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Reject adapter interrupt forwarding if already enabled
The MPCIFC instruction doesn't allow registering adapter interrupts without
first unregistering. So reject any request to enable interrupt forwarding
if its already enabled for the zPCI device. This also fixes overwriting and
thus leaking resources when the ioctl is called multiple times for the same
device. |
| In the Linux kernel, the following vulnerability has been resolved:
igbvf: Fix leak in TX DMA error cleanup
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented before each frag mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping (the head) would leak.
This bug was introduced by a 2010 fix for an endless loop in dma_error.
All other affected drivers have already been fixed. |
| In wlan STA FW, there is a possible system becoming unresponsive due to logging. This could lead to remote (proximal/adjacent) denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00486814; Issue ID: MSV-6824. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix skb leak on flow key update failure during ct
ovs_ct_execute() always steals or frees the skb on failure while
ovs_flow_key_update() does not. So, if it fails and we return right
away, the skb ends up leaked.
Fix that by breaking instead and letting the common error handling
code at the bottom of the loop to free the skb properly.
This is a very unlikely scenario as it requires the packet to become
unparseable by applying a set of actions on a previously parseable skb,
but should be fixed nevertheless.
Reported by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix stale rx/tx ops after device removal
RX: an RX_SETUP update(!) for an existing op skipped can_rx_register()
unconditionally, even when a concurrent NETDEV_UNREGISTER had already
torn down its registration (op->rx_reg_dev == NULL). This silently
did not re-enable frame delivery for that updated filter. bcm_rx_setup()
now re-registers in that case, while leaving rx_ops with ifindex = 0
(all CAN devices) which never carry a tracked rx_reg_dev registered as-is.
TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving
tx_ops with an active cyclic transmission re-arming its hrtimer
indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer
prevents the runaway timer and any injection into a later reused ifindex,
since nothing else calls bcm_can_tx() for the op until an explicit
TX_SETUP update re-arms it.
Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops,
the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup()
always rejects ifindex 0, so clearing it would strand the op: neither a
later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could
ever find it again, since both require an exact ifindex match. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: free mapping node on duplicate reloc root insert
__add_reloc_root() allocates a mapping_node before inserting it into
rc->reloc_root_tree. If rb_simple_insert() finds an existing entry, it
returns the existing rb_node and leaves the newly allocated node unlinked.
The error path then returns -EEXIST without freeing the new node. Since
the node was never inserted into reloc_root_tree, the later cleanup in
put_reloc_control() cannot find it either.
Free the newly allocated node before returning -EEXIST.
The callers currently assert that -EEXIST should not happen, so this is a
defensive cleanup for an unexpected duplicate insert path. If the path is
ever reached, the local allocation should still be released. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix root leak if its reloc root is unexpected in merge_reloc_roots()
If we have an unexpected reloc_root for our root, we jump to the out label
but never drop the reference we obtained for root, resulting in a leak.
Add a missing btrfs_put_root() call. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ipw2100: fix potential memory leak in ipw2100_pci_init_one()
The memory allocated in the ipw2100_alloc_device() function is not freed
in some of the error paths in ipw2100_pci_init_one(). Fix that by
converting the direct return into a goto to the error path return.
The error path when pci_enable_device() fails cannot jump to fail, since
at this point priv is not set, so perform error handling inline. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix memory leak in helper_firmware_cb()
helper_firmware_cb() neglects to free the single-stage firmware image
after a successful async load, leading to a memory leak in the USB
firmware-download path.
Fix this memory leak by calling release_firmware() immediately after
lbs_fw_loaded() returns.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
the current wireless tree.
An x86_64 allyesconfig build showed no new warnings. As we do not have
compatible Libertas USB hardware for exercising this firmware-download
path, no runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: free RNR data on MBSSID mismatch
nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR
entries than MBSSID entries.
The rejected RNR allocation has not been attached to the beacon data yet,
so free it before returning the error. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to improper processing of DRDA and DDM resynchronization requests. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: put MAC endpoint device on disconnect
fsl_mc_get_endpoint() returns the MAC endpoint device with a reference
taken through device_find_child(). The switch port connect path stores
that device in mac->mc_dev and keeps it for the lifetime of the connected
MAC object.
However, the disconnect path only closes the MAC and frees the dpaa2_mac
object. It does not drop the endpoint device reference stored in
mac->mc_dev, so every successful connect leaks that device reference when
the MAC is later disconnected.
Drop the endpoint device reference before freeing the dpaa2_mac object. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-eth: put MAC endpoint device on disconnect
fsl_mc_get_endpoint() returns the MAC endpoint device with a reference
taken through device_find_child(). The Ethernet connect path stores that
device in mac->mc_dev and keeps it for the lifetime of the connected MAC
object.
However, the disconnect path only disconnects and closes the MAC before
freeing the dpaa2_mac object. It does not drop the endpoint device
reference stored in mac->mc_dev, so every successful connect leaks that
device reference when the MAC is later disconnected.
Drop the endpoint device reference after closing the MAC and before
freeing the dpaa2_mac object. |
