| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tick/nohz: unexport __init-annotated tick_nohz_full_setup()
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it had been broken for a decade.
Commit 28438794aba4 ("modpost: fix section mismatch check for exported
init/exit sections") fixed it so modpost started to warn it again, then
this showed up:
MODPOST vmlinux.symvers
WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup()
The symbol tick_nohz_full_setup is exported and annotated __init
Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export.
Drop the export because tick_nohz_full_setup() is only called from the
built-in code in kernel/sched/isolation.c. |
| there is a possible Information Disclosure due to uninitialized data. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Prevent use of lock before it is initialized
If there is a failure during probe of hfi1 before the sdma_map_lock is
initialized, the call to hfi1_free_devdata() will attempt to use a lock
that has not been initialized. If the locking correctness validator is on
then an INFO message and stack trace resembling the following may be seen:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
Call Trace:
register_lock_class+0x11b/0x880
__lock_acquire+0xf3/0x7930
lock_acquire+0xff/0x2d0
_raw_spin_lock_irq+0x46/0x60
sdma_clean+0x42a/0x660 [hfi1]
hfi1_free_devdata+0x3a7/0x420 [hfi1]
init_one+0x867/0x11a0 [hfi1]
pci_device_probe+0x40e/0x8d0
The use of sdma_map_lock in sdma_clean() is for freeing the sdma_map
memory, and sdma_map is not allocated/initialized until after
sdma_map_lock has been initialized. This code only needs to be run if
sdma_map is not NULL, and so checking for that condition will avoid trying
to use the lock before it is initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix abort all task initialization
In pm80xx_send_abort_all(), the n_elem field of the ccb used is not
initialized to 0. This missing initialization sometimes lead to the task
completion path seeing the ccb with a non-zero n_elem resulting in the
execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(),
causing a crash such as:
[ 197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280
[ 197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012
[ 197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0
[ 197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0
[ 197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b
[ 197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000
[ 197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000
[ 197.741493] FS: 0000000000000000(0000) GS:ffff889bbcf80000(0000) knlGS:0000000000000000
[ 197.749659] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 197.755459] CR2: 00007f16c1b42734 CR3: 0000000004814000 CR4: 0000000000350ee0
[ 197.762656] Call Trace:
[ 197.765127] <IRQ>
[ 197.767162] pm8001_ccb_task_free+0x5f1/0x820 [pm80xx]
[ 197.772364] ? do_raw_spin_unlock+0x54/0x220
[ 197.776680] pm8001_mpi_task_abort_resp+0x2ce/0x4f0 [pm80xx]
[ 197.782406] process_oq+0xe85/0x7890 [pm80xx]
[ 197.786817] ? lock_acquire+0x194/0x490
[ 197.790697] ? handle_irq_event+0x10e/0x1b0
[ 197.794920] ? mpi_sata_completion+0x2d70/0x2d70 [pm80xx]
[ 197.800378] ? __wake_up_bit+0x100/0x100
[ 197.804340] ? lock_is_held_type+0x98/0x110
[ 197.808565] pm80xx_chip_isr+0x94/0x130 [pm80xx]
[ 197.813243] tasklet_action_common.constprop.0+0x24b/0x2f0
[ 197.818785] __do_softirq+0x1b5/0x82d
[ 197.822485] ? do_raw_spin_unlock+0x54/0x220
[ 197.826799] __irq_exit_rcu+0x17e/0x1e0
[ 197.830678] irq_exit_rcu+0xa/0x20
[ 197.834114] common_interrupt+0x78/0x90
[ 197.840051] </IRQ>
[ 197.844236] <TASK>
[ 197.848397] asm_common_interrupt+0x1e/0x40
Avoid this issue by always initializing the ccb n_elem field to 0 in
pm8001_send_abort_all(), pm8001_send_read_log() and
pm80xx_send_abort_all(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: micrel: Fix receiving the timestamp in the frame for lan8841
The blamed commit started to use the ptp workqueue to get the second
part of the timestamp. And when the port was set down, then this
workqueue is stopped. But if the config option NETWORK_PHY_TIMESTAMPING
is not enabled, then the ptp_clock is not initialized so then it would
crash when it would try to access the delayed work.
So then basically by setting up and then down the port, it would crash.
The fix consists in checking if the ptp_clock is initialized and only
then cancel the delayed work. |
| A Use of Uninitialized Resource vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on SRX4700 devices allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS).
When forwarding-options sampling is enabled, receipt of any traffic destined to the Routing Engine (RE) by the PFE line card leads to an FPC crash and restart, resulting in a Denial of Service (DoS).
Continued receipt and processing of any traffic leading to the RE by the PFE line card will create a sustained Denial of Service (DoS) condition to the PFE line card.
This issue affects Junos OS on SRX4700:
* from 24.4 before 24.4R1-S3, 24.4R2
This issue affects IPv4 and IPv6. |
| Windows NTFS Information Disclosure Vulnerability |
| Microsoft Host Integration Server 2020 Remote Code Execution Vulnerability |
| In Xpdf 4.05 (and earlier), invalid header info in a DCT (JPEG) stream can lead to an uninitialized variable in the DCT decoder. The proof-of-concept PDF file causes a segfault attempting to read from an invalid address. |
| A vulnerability was found in libzvbi up to 0.2.43. It has been classified as problematic. Affected is the function vbi_strndup_iconv_ucs2 of the file src/conv.c. The manipulation of the argument src_length leads to uninitialized pointer. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 0.2.44 is able to address this issue. The patch is identified as 8def647eea27f7fd7ad33ff79c2d6d3e39948dce. It is recommended to upgrade the affected component. The code maintainer was informed beforehand about the issues. She reacted very fast and highly professional. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier
If the read of USB_PDPHY_RX_ACKNOWLEDGE_REG failed, then hdr_len and
txbuf_len are uninitialized. This commit stops to print uninitialized
value and misleading/false data. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: rtq2208: Fix uninitialized use of regulator_config
Fix rtq2208 driver uninitialized use to cause kernel error. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix access to uninitialized variable in tick_ctx_cleanup()
The group variable can't be used to retrieve ptdev in our second loop,
because it points to the previously iterated list_head, not a valid
group. Get the ptdev object from the scheduler instead. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: avoid garbage value in panthor_ioctl_dev_query()
'priorities_info' is uninitialized, and the uninitialized value is copied
to user object when calling PANTHOR_UOBJ_SET(). Using memset to initialize
'priorities_info' to avoid this garbage value problem. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix a use of uninitialized mutex
commit c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra")
caused a use of uninitialized mutex leading to below warning when
CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled.
[ 41.662843] ------------[ cut here ]------------
[ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878
[ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod
[ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1
[ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024
[ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 41.679636] pc : __mutex_lock+0x670/0x878
[ 41.683834] lr : __mutex_lock+0x670/0x878
[ 41.688035] sp : ffff800084b77090
[ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000
[ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000
[ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0
[ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000
[ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720
[ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3
[ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc
[ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001
[ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000
[ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000
[ 41.764251] Call trace:
[ 41.766695] __mutex_lock+0x670/0x878
[ 41.770373] mutex_lock_nested+0x2c/0x40
[ 41.774134] host1x_intr_start+0x54/0xf8 [host1x]
[ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x]
[ 41.783935] pm_generic_runtime_resume+0x84/0xc8
[ 41.788485] __rpm_callback+0xa0/0x478
[ 41.792422] rpm_callback+0x15c/0x1a8
[ 41.795922] rpm_resume+0x698/0xc08
[ 41.799597] __pm_runtime_resume+0xa8/0x140
[ 41.803621] host1x_probe+0x810/0xbc0 [host1x]
[ 41.807909] platform_probe+0xcc/0x1a8
[ 41.811845] really_probe+0x188/0x800
[ 41.815347] __driver_probe_device+0x164/0x360
[ 41.819810] driver_probe_device+0x64/0x1a8
[ 41.823834] __driver_attach+0x180/0x490
[ 41.827773] bus_for_each_dev+0x104/0x1a0
[ 41.831797] driver_attach+0x44/0x68
[ 41.835296] bus_add_driver+0x23c/0x4e8
[ 41.839235] driver_register+0x15c/0x3a8
[ 41.843170] __platform_register_drivers+0xa4/0x208
[ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x]
[ 41.853147] do_one_initcall+0xd4/0x380
[ 41.856997] do_init_module+0x1dc/0x698
[ 41.860758] load_module+0xc70/0x1300
[ 41.864435] __do_sys_init_module+0x1a8/0x1d0
[ 41.868721] __arm64_sys_init_module+0x74/0xb0
[ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8
[ 41.877997] do_el0_svc+0x154/0x1d0
[ 41.881671] el0_svc+0x54/0x140
[ 41.884820] el0t_64_sync_handler+0x120/0x130
[ 41.889285] el0t_64_sync+0x1a4/0x1a8
[ 41.892960] irq event stamp: 69737
[ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8
[ 41.905739] hardirqs last disabled at (69736):
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1745: fix information leak in triggered buffer
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it does not set values for inactive channels, as
it only uses iio_for_each_active_channel() to assign new values.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads1119: fix information leak in triggered buffer
The 'scan' local struct is used to push data to user space from a
triggered buffer, but it has a hole between the sample (unsigned int)
and the timestamp. This hole is never initialized.
Initialize the struct to zero before using it to avoid pushing
uninitialized information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
Currently fpmr_set() doesn't initialize the temporary 'fpmr' variable,
and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently an arbitrary value will be written back to
target->thread.uw.fpmr, potentially leaking up to 64 bits of memory from
the kernel stack. The read is limited to a specific slot on the stack,
and the issue does not provide a write mechanism.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
contents of FPMR will be retained.
Before this patch:
| # ./fpmr-test
| Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d
| SETREGSET(nt=0x40e, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d
|
| Attempting to write NT_ARM_FPMR (zero length)
| SETREGSET(nt=0x40e, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0xffff800083963d50
After this patch:
| # ./fpmr-test
| Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d
| SETREGSET(nt=0x40e, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d
|
| Attempting to write NT_ARM_FPMR (zero length)
| SETREGSET(nt=0x40e, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
Currently poe_set() doesn't initialize the temporary 'ctrl' variable,
and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently an arbitrary value will be written back to
target->thread.por_el0, potentially leaking up to 64 bits of memory from
the kernel stack. The read is limited to a specific slot on the stack,
and the issue does not provide a write mechanism.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
contents of POR_EL1 will be retained.
Before this patch:
| # ./poe-test
| Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d
| SETREGSET(nt=0x40f, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d
|
| Attempting to write NT_ARM_POE (zero length)
| SETREGSET(nt=0x40f, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0xffff8000839c3d50
After this patch:
| # ./poe-test
| Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d
| SETREGSET(nt=0x40f, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d
|
| Attempting to write NT_ARM_POE (zero length)
| SETREGSET(nt=0x40f, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: fix uninit-value in mpol_rebind_policy()
mpol_set_nodemask()(mm/mempolicy.c) does not set up nodemask when
pol->mode is MPOL_LOCAL. Check pol->mode before access
pol->w.cpuset_mems_allowed in mpol_rebind_policy()(mm/mempolicy.c).
BUG: KMSAN: uninit-value in mpol_rebind_policy mm/mempolicy.c:352 [inline]
BUG: KMSAN: uninit-value in mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368
mpol_rebind_policy mm/mempolicy.c:352 [inline]
mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368
cpuset_change_task_nodemask kernel/cgroup/cpuset.c:1711 [inline]
cpuset_attach+0x787/0x15e0 kernel/cgroup/cpuset.c:2278
cgroup_migrate_execute+0x1023/0x1d20 kernel/cgroup/cgroup.c:2515
cgroup_migrate kernel/cgroup/cgroup.c:2771 [inline]
cgroup_attach_task+0x540/0x8b0 kernel/cgroup/cgroup.c:2804
__cgroup1_procs_write+0x5cc/0x7a0 kernel/cgroup/cgroup-v1.c:520
cgroup1_tasks_write+0x94/0xb0 kernel/cgroup/cgroup-v1.c:539
cgroup_file_write+0x4c2/0x9e0 kernel/cgroup/cgroup.c:3852
kernfs_fop_write_iter+0x66a/0x9f0 fs/kernfs/file.c:296
call_write_iter include/linux/fs.h:2162 [inline]
new_sync_write fs/read_write.c:503 [inline]
vfs_write+0x1318/0x2030 fs/read_write.c:590
ksys_write+0x28b/0x510 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0xdb/0x120 fs/read_write.c:652
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
slab_alloc mm/slub.c:3259 [inline]
kmem_cache_alloc+0x902/0x11c0 mm/slub.c:3264
mpol_new mm/mempolicy.c:293 [inline]
do_set_mempolicy+0x421/0xb70 mm/mempolicy.c:853
kernel_set_mempolicy mm/mempolicy.c:1504 [inline]
__do_sys_set_mempolicy mm/mempolicy.c:1510 [inline]
__se_sys_set_mempolicy+0x44c/0xb60 mm/mempolicy.c:1507
__x64_sys_set_mempolicy+0xd8/0x110 mm/mempolicy.c:1507
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
KMSAN: uninit-value in mpol_rebind_task (2)
https://syzkaller.appspot.com/bug?id=d6eb90f952c2a5de9ea718a1b873c55cb13b59dc
This patch seems to fix below bug too.
KMSAN: uninit-value in mpol_rebind_mm (2)
https://syzkaller.appspot.com/bug?id=f2fecd0d7013f54ec4162f60743a2b28df40926b
The uninit-value is pol->w.cpuset_mems_allowed in mpol_rebind_policy().
When syzkaller reproducer runs to the beginning of mpol_new(),
mpol_new() mm/mempolicy.c
do_mbind() mm/mempolicy.c
kernel_mbind() mm/mempolicy.c
`mode` is 1(MPOL_PREFERRED), nodes_empty(*nodes) is `true` and `flags`
is 0. Then
mode = MPOL_LOCAL;
...
policy->mode = mode;
policy->flags = flags;
will be executed. So in mpol_set_nodemask(),
mpol_set_nodemask() mm/mempolicy.c
do_mbind()
kernel_mbind()
pol->mode is 4 (MPOL_LOCAL), that `nodemask` in `pol` is not initialized,
which will be accessed in mpol_rebind_policy(). |
