| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix potential deadlock in mt7925_roc_abort_sync
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() ->
mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() ->
mt7925_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix deadlock in remain-on-channel
mt76_remain_on_channel() and mt76_roc_complete() call mt76_set_channel()
while already holding dev->mutex. Since mt76_set_channel() also acquires
dev->mutex, this results in a deadlock.
Use __mt76_set_channel() instead of mt76_set_channel().
Add cancel_delayed_work_sync() for mac_work before acquiring the mutex
in mt76_remain_on_channel() to prevent a secondary deadlock with the
mac_work workqueue. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: usbhid: fix deadlock in hid_post_reset()
You can build a USB device that includes a HID component
and a storage or UAS component. The components can be reset
only together. That means that hid_pre_reset() and hid_post_reset()
are in the block IO error handling. Hence no memory allocation
used in them may do block IO because the IO can deadlock
on the mutex held while resetting a device and calling the
interface drivers.
Use GFP_NOIO for all allocations in them. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate group add input before caching
[BUG]
OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in
ocfs2_set_new_buffer_uptodate():
kernel BUG at fs/ocfs2/uptodate.c:509!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509
Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df
Call Trace:
ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507
ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7bbfb55a966d
[CAUSE]
ocfs2_group_add() calls ocfs2_set_new_buffer_uptodate() on a
user-controlled group block before ocfs2_verify_group_and_input()
validates that block number. That helper is only valid for newly
allocated metadata and asserts that the block is not already present in
the chosen metadata cache. The code also uses INODE_CACHE(inode) even
though the group descriptor belongs to main_bm_inode and later journal
accesses use that cache context instead.
[FIX]
Validate the on-disk group descriptor before caching it, then add it to
the metadata cache tracked by INODE_CACHE(main_bm_inode). Keep the
validation failure path separate from the later cleanup path so we only
remove the buffer from that cache after it has actually been inserted.
This keeps the group buffer lifetime consistent across validation,
journaling, and cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size
The generic/642 test-case can reproduce the kernel crash:
[40243.605254] ------------[ cut here ]------------
[40243.605956] kernel BUG at fs/ceph/xattr.c:918!
[40243.607142] Oops: invalid opcode: 0000 [#1] SMP PTI
[40243.608067] CPU: 7 UID: 0 PID: 498762 Comm: kworker/7:1 Not tainted 7.0.0-rc7+ #3 PREEMPT(full)
[40243.609700] Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[40243.611820] Workqueue: ceph-msgr ceph_con_workfn
[40243.612715] RIP: 0010:__ceph_build_xattrs_blob+0x1b8/0x1e0
[40243.613731] Code: 0f 84 82 fe ff ff e9 cf 8e 56 ff 48 8d 65 e8 31 c0 5b 41 5c 41 5d 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 c3 cc cc cc cc <0f> 0b 4c 8b 62 08 41 8b 85 24 07 00 00 49 83 c4 04 41 89 44 24 fc
[40243.616888] RSP: 0018:ffffcc80c4d4b688 EFLAGS: 00010287
[40243.617773] RAX: 0000000000010026 RBX: 0000000000000001 RCX: 0000000000000000
[40243.618928] RDX: ffff8a773798dee0 RSI: 0000000000000000 RDI: 0000000000000000
[40243.620158] RBP: ffffcc80c4d4b6a0 R08: 0000000000000000 R09: 0000000000000000
[40243.621573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a75f3b58000
[40243.622907] R13: ffff8a75f3b58000 R14: 0000000000000080 R15: 000000000000bffd
[40243.624054] FS: 0000000000000000(0000) GS:ffff8a787d1b4000(0000) knlGS:0000000000000000
[40243.625331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[40243.626269] CR2: 000072f390b623c0 CR3: 000000011c02a003 CR4: 0000000000372ef0
[40243.627408] Call Trace:
[40243.627839] <TASK>
[40243.628188] __prep_cap+0x3fd/0x4a0
[40243.628789] ? do_raw_spin_unlock+0x4e/0xe0
[40243.629474] ceph_check_caps+0x46a/0xc80
[40243.630094] ? __lock_acquire+0x4a2/0x2650
[40243.630773] ? find_held_lock+0x31/0x90
[40243.631347] ? handle_cap_grant+0x79f/0x1060
[40243.632068] ? lock_release+0xd9/0x300
[40243.632696] ? __mutex_unlock_slowpath+0x3e/0x340
[40243.633429] ? lock_release+0xd9/0x300
[40243.634052] handle_cap_grant+0xcf6/0x1060
[40243.634745] ceph_handle_caps+0x122b/0x2110
[40243.635415] mds_dispatch+0x5bd/0x2160
[40243.636034] ? ceph_con_process_message+0x65/0x190
[40243.636828] ? lock_release+0xd9/0x300
[40243.637431] ceph_con_process_message+0x7a/0x190
[40243.638184] ? kfree+0x311/0x4f0
[40243.638749] ? kfree+0x311/0x4f0
[40243.639268] process_message+0x16/0x1a0
[40243.639915] ? sg_free_table+0x39/0x90
[40243.640572] ceph_con_v2_try_read+0xf58/0x2120
[40243.641255] ? lock_acquire+0xc8/0x300
[40243.641863] ceph_con_workfn+0x151/0x820
[40243.642493] process_one_work+0x22f/0x630
[40243.643093] ? process_one_work+0x254/0x630
[40243.643770] worker_thread+0x1e2/0x400
[40243.644332] ? __pfx_worker_thread+0x10/0x10
[40243.645020] kthread+0x109/0x140
[40243.645560] ? __pfx_kthread+0x10/0x10
[40243.646125] ret_from_fork+0x3f8/0x480
[40243.646752] ? __pfx_kthread+0x10/0x10
[40243.647316] ? __pfx_kthread+0x10/0x10
[40243.647919] ret_from_fork_asm+0x1a/0x30
[40243.648556] </TASK>
[40243.648902] Modules linked in: overlay hctr2 libpolyval chacha libchacha adiantum libnh libpoly1305 essiv intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit kvm_intel kvm irqbypass joydev ghash_clmulni_intel aesni_intel rapl input_leds mac_hid psmouse vga16fb serio_raw vgastate floppy i2c_piix4 pata_acpi bochs qemu_fw_cfg i2c_smbus sch_fq_codel rbd dm_crypt msr parport_pc ppdev lp parport efi_pstore
[40243.654766] ---[ end trace 0000000000000000 ]---
Commit d93231a6bc8a ("ceph: prevent a client from exceeding the MDS
maximum xattr size") moved the required_blob_size computation to before
the __build_xattrs() call, introducing a race.
__build_xattrs() releases and reacquires i_ceph_lock during execution.
In that window, handle_cap_grant() may update i_xattrs.blob with a
newer MDS-provided blob and bump i_xattrs.version. When
__bui
---truncated--- |
| Jenkins OWASP ZAP Plugin 1.0.7 and earlier performs build operations on the Jenkins controller rather than the assigned agent, allowing attackers with Item/Configure permission to execute arbitrary code on the Jenkins controller. |
| An unauthorized user can modify configuration through API
calls that affects the OpenText Access
Manager. This issue affects Access Manager before 5.1.3. |
| concurrent-ruby is a modern concurrency tools for Ruby. Prior to 1.3.7, Concurrent::ReadWriteLock#release_write_lock does not verify that the calling thread acquired the write lock. Any thread with access to the lock object can release an active write lock held by another thread. A second writer can then enter its critical section while the first writer is still running. Concurrent::ReadWriteLock#release_read_lock also decrements the shared counter even when no read lock is held. Calling it on a fresh lock changes the counter from 0 to -1, after which normal read acquisition raises Concurrent::ResourceLimitError. This is a synchronization correctness issue in the public Concurrent::ReadWriteLock API. This vulnerability is fixed in 1.3.7. |
| A vulnerability in the browser-based version of Cisco Webex App could have allowed an unauthenticated, remote attacker to redirect users to a malicious webpage. Cisco has addressed this vulnerability in the Cisco Webex App, and no customer action is needed.
This vulnerability existed due to improper input validation of URL parameters in an HTTP request. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by persuading a user to click a crafted URL. A successful exploit could have allowed the attacker to redirect a user to a malicious website. |
| Open redirect in pgAdmin 4's multi-factor authentication flow. The MFA validate and register endpoints honoured the user-supplied 'next' query/form parameter without confirming the target pointed back inside pgAdmin, so an authenticated victim who clicked /mfa/validate?next=<external> -- a link typically delivered by phishing -- would be sent to an attacker-controlled host directly out of the trusted auth flow.
The defect is a trusted-domain redirect, not a privilege bypass: the attacker gains no read/write access to pgAdmin or the victim's database, but the redirect launders the attacker's destination through pgAdmin's URL, which raises the success rate of credential-phishing follow-on against the victim.
Fix introduces a same-origin _is_safe_redirect_url helper and gates every MFA redirect that consumes user-supplied 'next' values through it. The helper allows only relative paths and absolute URLs whose scheme is http(s) and whose host matches the current request host; it rejects external hosts in absolute and protocol-relative form, non-http schemes (javascript:, data:, mailto:), userinfo tricks (http://localhost@attacker/), and backslash variants that some browsers normalize to forward slashes. Unsafe targets fall back to the internal browser index. A dedicated regression test exercises each accept/reject category and the original reporter PoC.
This issue affects pgAdmin 4: from 6.0 before 9.16. |
| Cap-go before 12.128.2 contains an authentication logic flaw that lets an attacker register and control an account bound to a victim's email address before that email is verified. By enabling two-factor authentication on the pre-registered account, the attacker gains control over the account claimed under the victim's identity, allowing them to read and modify its state and enforce organization-level policies, while the legitimate user is denied access to the account tied to their own email. |
| The Branda plugin for WordPress is vulnerable to privilege escalation via account takeover in all versions up to, and including, 3.4.29. This is due to the plugin not properly validating a user's identity prior to updating their password. This makes it possible for unauthenticated attackers to change arbitrary user's passwords, including administrators, and leverage that to gain access to their account. |
| Capgo before 12.128.12 allows authenticated users to modify their mutable public.users.email to arbitrary addresses, which the SSO provisioning endpoint trusts as an account-merge key. Attackers can pre-position their account with a victim's corporate SSO email, causing the provision-user endpoint to merge the victim's SSO identity into the attacker-controlled account. |
| The U.S. Government Accountability Office (GAO) Electronic Protest Docketing System (EPDS) and Civilian Board of Contract Appeals (CBCA) Electronic Docketing System (EDS) expose sensitive account information through the 'update-profile/' API endpoint. A remote, unauthenticated attacker can submit a request containing an arbitrary 'user_id' parameter and receive a JSON response containing account-specific information, including the associated email address. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.04.1, the refresh-token cookie was set with httpOnly: true but missing both the secure flag and the sameSite attribute. Over plain HTTP the cookie could be intercepted on the network; without sameSite, browsers attached it to cross-site POSTs, enabling CSRF against the token-refresh endpoint. This vulnerability is fixed in 2026.04.1. |
| Jenkins Script Security Plugin 1402.v94c9ce464861 and earlier does not reject Groovy AST transformation annotations carrying an extensions member, allowing attackers able to run sandboxed Groovy scripts to execute code outside the sandbox if a suitable script is present on the classpath of the component that evaluates the script. |
| Cap-go before 12.128.12 contains a broken cursor pagination vulnerability in the /private/devices endpoint on the Cloudflare/workerd path that allows authenticated attackers to cause duplicate-page loops and make later rows unreachable. Attackers with app.read_devices access can exploit non-advancing cursor filters to trigger infinite pagination loops, prevent dataset traversal, and cause repeated processing in device-management workflows. |
| Capgo before 12.128.2 contains an open redirect vulnerability in stripe_portal and stripe_checkout endpoints that accept unvalidated callbackUrl, successUrl, and cancelUrl parameters. Authenticated attackers can craft malicious billing URLs to redirect users to attacker-controlled domains for phishing and credential harvesting. |
| Capgo before 12.128.2 contains an open redirect vulnerability in the confirm-signup endpoint that allows attackers to redirect users to arbitrary external websites. The confirmation_url parameter is not validated, enabling attackers to craft malicious links for phishing and credential harvesting attacks. |
| Capgo before 12.128.2 contains an authorization bypass vulnerability in the /build/status and /build/logs endpoints that allows attackers to access build jobs belonging to different applications by supplying a mismatched app_id and job_id combination. Limited API keys restricted to a single app can retrieve build status and logs from other apps by providing an authorized app_id while using a job_id from an unauthorized app, exposing sensitive build information including logs, metadata, and potentially credentials. |
