| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid heap allocation for free-cluster readahead state
get_nr_free_clusters() allocates a temporary file_ra_state before it
publishes the precomputed free cluster count, sets NVolFreeClusterKnown(),
and wakes vol->free_waitq. If that allocation fails, the worker returns
without setting the flag or waking waiters, so callers waiting for the free
count can block indefinitely.
The readahead state is only used synchronously while scanning the bitmap.
Keep it on the stack and pass it by address to the readahead helper. This
eliminates the early allocation failure path instead of adding a special
case that publishes a conservative count and wakes the waitqueue.
Zero-initialize the on-stack state because file_ra_state_init() only sets
ra_pages and prev_pos.
Apply the same treatment to __get_nr_free_mft_records(), which scans the
MFT bitmap with the same short-lived readahead state. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate index entries on reading
Validate index entries immediately after reading an index root or index
block from disk. This eliminates repeated checks in lookup and readdir,
and reduce the risk of missing checks in those paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: detect mapping-pairs LCN accumulator overflow
The NTFS mapping-pairs parser accumulates relative LCN deltas in a
signed integer. A corrupted attribute can drive that addition past
the representable range.
One corrupt runlist shape sets the accumulated LCN to S64_MAX and
then adds a delta of 1 in the next mapping-pairs entry.
Signed overflow is undefined and can turn an invalid runlist into a
different set of physical clusters.
Check the LCN addition for overflow before storing the next run. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject non-resident records for resident-only attributes
The shared lookup-time attribute validator rejects non-resident
$FILE_NAME and $VOLUME_NAME records because their formats require
resident values and callers handle returned records as resident
attributes. Other resident-only attribute types still pass through the
generic non-resident mapping-pairs checks.
That leaves real resident/non-resident union confusion paths. Inode load
looks up $STANDARD_INFORMATION and then reads data.resident.value_offset
without checking a->non_resident. ntfs_inode_sync_standard_information()
does the same when updating the standard information value.
ntfs_write_volume_flags() also looks up $VOLUME_INFORMATION and reads
data.resident.value_offset directly. $INDEX_ROOT callers in dir.c and
index.c depend on the same lookup contract before consuming the resident
index root value.
Reject non-resident records for all resident-only attribute types in the
shared validator. Keep the existing $FILE_NAME and $VOLUME_NAME behavior,
but factor it through a helper and extend it to
$STANDARD_INFORMATION, $OBJECT_ID, $VOLUME_INFORMATION, $INDEX_ROOT, and
$EA_INFORMATION. For $OBJECT_ID and $EA_INFORMATION this is contract
hardening for resident-only formats; this patch only rejects the
non-resident form and does not add new resident value validation for
those types. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
[BUG]
On-disk corruption setting l_next_free_rec to 0 in an inode's embedded
extent list triggers a UBSAN panic on the next write to that file.
[CAUSE]
ocfs2_sum_rightmost_rec() computes
i = le16_to_cpu(el->l_next_free_rec) - 1
and accesses el->l_recs[i] without validating i. When l_next_free_rec
is 0, i becomes -1; when l_next_free_rec exceeds l_count, i falls
past the end of the array. Either case violates the
__counted_by_le(l_count) annotation on l_recs[] and triggers UBSAN.
[FIX]
Validate the inode's embedded extent list when the inode is read, in
ocfs2_validate_inode_block(): l_count must be non-zero and no larger
than the inode block can hold, and l_next_free_rec must not exceed
l_count. A corrupt list is rejected at read time, before the b-tree
code can index l_recs[] out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix uninitialized xprt_create_args structure
The xprt_create_args structure is allocated on the stack without
initialization in rpc_sysfs_xprt_switch_add_xprt_store(). While some
fields are manually populated, critical fields like srcaddr, bc_xps,
and flags contain uninitialized stack garbage.
This can lead to:
1. Kernel panic when xs_setup_xprt() dereferences garbage srcaddr
2. Information leak if srcaddr points to sensitive stack data
3. Unpredictable behavior if flags has random bits set
The fix is to zero-initialize the structure to ensure all unused
fields are NULL/0, preventing the transport setup code from acting
on garbage data. |
| The Quill Forms | Conversational Multi Step Forms, Surveys & quizzes plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 5.7.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rt2x00: avoid full teardown before work setup in probe
rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for
all probe failures. However, drv_data allocation and workqueue allocation
can fail before intf_work, autowakeup_work and sleep_work have been
initialized.
Do not enter the full remove path until the probe has reached the point
where those work items are set up. Return directly for drv_data allocation
failure, and use a small early cleanup path for workqueue allocation
failure.
This issue was found by our static analysis tool and then confirmed by
manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The
early probe exits should not call a common teardown path that assumes the
later work setup has already completed.
A QEMU PoC forced alloc_ordered_workqueue() to fail before the work
initializers are reached. The resulting fail path entered
rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with
rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: rebind mm mempolicy to effective_mems, not mems_allowed
Creating a child cpuset where cpuset.mems is never set leads to a div/0
when a VMA mempolicy with MPOL_F_RELATIVE_NODES rebinds in response to a
CPU hotplug event.
Reproduction steps:
1) Create a cgroup w/ cpuset controls (do not set cpuset.mems)
2) Move the task into the child cpuset
3) Create a VMA mempolicy for that task with MPOL_F_RELATIVE_NODES
4) unplug and hotplug a cpu
echo 0 > /sys/devices/system/cpu/cpu1/online
echo 1 > /sys/devices/system/cpu/cpu1/online
5) mempolicy rebind does a div/0 in mpol_relative_nodemask on the
call to __nodes_fold()
The cpuset code passes (cs->mems_allowed) which is not guaranteed to have
nodes to the rebind routine. Use cs->effective_mems instead, which is
guaranteed to have a non-empty nodemask once we reach that code path.
[ david: add a comment, slightly rephrase description ] |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix SQB pointer leak on init failure
otx2_init_hw_resources() initializes SQ aura and pool resources before
several later setup steps. On failure, err_free_sq_ptrs only frees SQB
pages, leaving the per-SQ sqb_ptrs arrays behind.
Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs
even when sq->sqe has not been allocated yet.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
OcteonTX2 PF device and the corresponding AF mailbox setup to test with,
no runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to
simplify error handling. pm_runtime_resume_and_get() automatically
drops the usage counter on failure, avoiding the need for a separate
pm_runtime_put_noidle() call. If it fails, the device is unclocked and
accessing hardware registers would cause a kernel panic, so return the
error immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/uaccess: correct check for CONFIG_PPC_E500 in mask_user_address()
mask_user_address() incorrectly checks for CONFIG_E500 instead of
CONFIG_PPC_E500, causing mask_user_address_isel() to not be used on
E500 hardware. Fix the check to use the correct name. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: cyw: fix heap overflow on a short auth frame
brcmf_notify_auth_frame_rx() takes the frame length from the firmware
event and copies the frame body with the management header offset
subtracted:
u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data);
...
memcpy(&mgmt_frame->u, frame,
mgmt_frame_len - offsetof(struct ieee80211_mgmt, u));
The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len
can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When
mgmt_frame_len is below that, the subtraction wraps as an unsigned value to
a huge length. The memcpy then runs far past the kzalloc'd buffer. A
malicious or malfunctioning AP can make the frame short during the
external SAE auth exchange, so this is a remotely triggered heap overflow.
Reject frames shorter than the management header offset before the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/diag: Add missing array_index_nospec() call to memtop_get_page_count()
'level' is user space controlled and used to read from an array. Add the
missing array_index_nospec() call to prevent speculative execution. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: reset full ip_vs_seq structs in ip_vs_conn_new
Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in
ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn
object with kmem_cache_alloc(). The function then initializes many
fields explicitly, but only resets in_seq.delta and out_seq.delta in the
two struct ip_vs_seq members.
That leaves init_seq and previous_delta uninitialized. This is normally
harmless while the corresponding IP_VS_CONN_F_IN_SEQ or
IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync
message, however, ip_vs_proc_conn() preserves those flags from
IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits
IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with
SEQ flags set but with the rest of in_seq/out_seq still containing stale
slab data.
When a packet for such a connection is later handled by an IPVS
application helper, vs_fix_seq() and vs_fix_ack_seq() use
previous_delta and init_seq to rewrite TCP sequence numbers. A malformed
sync message can therefore make forwarded packets carry stale slab bytes
in their TCP seq/ack numbers, and can also corrupt the forwarded TCP
flow.
Reset both struct ip_vs_seq members completely before publishing the
connection. This matches the existing "reset struct ip_vs_seq" comment
and keeps the sequence-adjustment gates inactive unless valid sequence
data is installed later. |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: fix BAR resource leak on PF number failure
If cn23xx_get_pf_num() fails, the function returns without
unmapping either BAR. Unmap both BARs before returning from
the error path.
Found by manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp()
If the allocation of fp[i].tpa_info fails, the error path will not free
the struct bnx2x_fastpath allocated earlier, as it is not linked to the
bp structure yet. Fix that by linking it immediately after allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ixp4xx_hss: fix duplicate HDLC netdev allocation
ixp4xx_hss_probe() allocates two HDLC netdevs. The first one is stored
in ndev, initialized, and registered with register_hdlc_device(). The
second one is stored in port->netdev and later used by the remove path
for unregister_hdlc_device() and free_netdev().
This means that the registered netdev is not the same object that is
unregistered and freed on remove. It also leaks the first allocation if
the second alloc_hdlcdev() call fails, and the first allocation is not
checked before ndev is used.
Older code allocated the HDLC netdev only once and stored the same object
in both the local variable and port->netdev. The buggy conversion split
this into two alloc_hdlcdev() calls. A later rename changed the local
variable name to ndev, but the underlying mismatch remained.
Fix this by allocating the HDLC netdev only once and assigning the same
object to port->netdev. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-fence: Make dma_fence_dedup_array() robust against 0-count input
dma_fence_dedup_array() returns 1 when called with num_fences == 0:
the for-loop body never executes, j stays at 0, and the final
`return ++j` yields 1. This contradicts both the kernel-doc ("Return:
Number of unique fences remaining in the array") and the natural
expectation that 0 input gives 0 output.
The caller __dma_fence_unwrap_merge() bails out via the
`if (count == 0 || count == 1)` fast path and so is save.
But amdgpu_userq_wait_*() could reach the dedup call with a zero local
count and dereference an uninitialized fence slot in the array.
Make the contract match the documentation by returning 0 early. This
also skips an unnecessary sort() call on an empty array. |
| In Progress ShareFile Storage Zones Controller v5.12.5 and below versions, unsafe deserialization of untrusted file metadata can allow a user with write access to a Network share to execute arbitrary code on the Storage Zones Controller host. |
