| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A testdata data-source can be used to trigger out-of-memory crashes in Grafana. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: pinconf-generic: Fix memory leak in pinconf_generic_parse_dt_config()
In pinconf_generic_parse_dt_config(), if parse_dt_cfg() fails, it returns
directly. This bypasses the cleanup logic and results in a memory leak of
the cfg buffer.
Fix this by jumping to the out label on failure, ensuring kfree(cfg) is
called before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.
Let's say we bind() an UDP socket to the wildcard address with a
non-zero port, connect() it to an address, and disconnect it from
the address.
bind() sets SOCK_BINDPORT_LOCK on sk->sk_userlocks (but not
SOCK_BINDADDR_LOCK), and connect() calls udp_lib_hash4() to put
the socket into the 4-tuple hash table.
Then, __udp_disconnect() calls sk->sk_prot->rehash(sk).
It computes a new hash based on the wildcard address and moves
the socket to a new slot in the 4-tuple hash table, leaving a
garbage in the chain that no packet hits.
Let's remove such a socket from 4-tuple hash table when disconnected.
Note that udp_sk(sk)->udp_portaddr_hash needs to be udpated after
udp_hash4_dec(hslot2) in udp_unhash4(). |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix fragment node deletion to prevent buffer leak
After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"),
the list_node field is reused for both the xskb pool list and the buffer
free list, this causes a buffer leak as described below.
xp_free() checks if a buffer is already on the free list using
list_empty(&xskb->list_node). When list_del() is used to remove a node
from the xskb pool list, it doesn't reinitialize the node pointers.
This means list_empty() will return false even after the node has been
removed, causing xp_free() to incorrectly skip adding the buffer to the
free list.
Fix this by using list_del_init() instead of list_del() in all fragment
handling paths, this ensures the list node is reinitialized after removal,
allowing the list_empty() to work correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: bq257xx: Fix device node reference leak in bq257xx_reg_dt_parse_gpio()
In bq257xx_reg_dt_parse_gpio(), if fails to get subchild, it returns
without calling of_node_put(child), causing the device node reference
leak. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver
The recently added macsmc-hwmon driver contained several critical
bugs in its sensor population logic and float conversion routines.
Specifically:
- The voltage sensor population loop used the wrong prefix ("volt-"
instead of "voltage-") and incorrectly assigned sensors to the
temperature sensor array (hwmon->temp.sensors) instead of the
voltage sensor array (hwmon->volt.sensors). This would lead to
out-of-bounds memory access or data corruption when both temperature
and voltage sensors were present.
- The float conversion in macsmc_hwmon_write_f32() had flawed exponent
logic for values >= 2^24 and lacked masking for the mantissa, which
could lead to incorrect values being written to the SMC.
Fix these issues to ensure correct sensor registration and reliable
manual fan control.
Confirm that the reported overflow in FIELD_PREP is fixed by declaring
macsmc_hwmon_write_f32() as __always_inline for a compile test. |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: etas_es58x: correctly anchor the urb in the read bulk callback
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: free pages on error in btrfs_uring_read_extent()
In this function the 'pages' object is never freed in the hopes that it is
picked up by btrfs_uring_read_finished() whenever that executes in the
future. But that's just the happy path. Along the way previous
allocations might have gone wrong, or we might not get -EIOCBQUEUED from
btrfs_encoded_read_regular_fill_pages(). In all these cases, we go to a
cleanup section that frees all memory allocated by this function without
assuming any deferred execution, and this also needs to happen for the
'pages' allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic-spisg: Fix memory leak in aml_spisg_probe()
In aml_spisg_probe(), ctlr is allocated by
spi_alloc_target()/spi_alloc_host(), but fails to call
spi_controller_put() in several error paths. This leads
to a memory leak whenever the driver fails to probe after
the initial allocation.
Convert to use devm_spi_alloc_host()/devm_spi_alloc_target()
to fix the memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Fix use-after-free in mshv_map_user_memory error path
In the error path of mshv_map_user_memory(), calling vfree() directly on
the region leaves the MMU notifier registered. When userspace later unmaps
the memory, the notifier fires and accesses the freed region, causing a
use-after-free and potential kernel panic.
Replace vfree() with mshv_partition_put() to properly unregister
the MMU notifier before freeing the region. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 10.6 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that could have allowed an authenticated user to cause denial of service under certain conditions by exhausting server resources by making crafted requests to a discussions endpoint. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.4 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that could have allowed an authenticated user to cause denial of service by overwhelming system resources under certain conditions due to insufficient resource allocation limits in the GraphQL API. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 9.2 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that could have allowed an authenticated user to cause denial of service due to insufficient resource allocation limits when retrieving notes under certain conditions. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.3 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that under certain conditions could have allowed an authenticated user to cause denial of service when importing issues due to improper input validation. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 16.1.0 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that under certain conditions could have allowed an unauthenticated user to access tokens in the Storybook development environment due to improper input validation. |
| An improper resource deallocation and closure vulnerability in the tools/zmqsend.c component of FFmpeg v8.0.1 allows attackers to cause a Denial of Service (DoS) via supplying a crafted input file. |
| A heap buffer overflow in the av_bprint_finalize() function of FFmpeg v8.0.1 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| Pega Platform versions 8.1.0 through 25.1.1 are affected by a Stored Cross-Site Scripting vulnerability in a user interface component. Requires a high privileged user with a developer role. |
| free5GC UDR is the user data repository (UDR) for free5GC, an an open-source project for 5th generation (5G) mobile core networks. In versions up to and including 1.4.2, a fail-open request handling flaw in the UDR service causes the `/nudr-dr/v2/policy-data/subs-to-notify` POST handler to continue processing requests even after request body retrieval or deserialization errors. This may allow unintended creation of Policy Data notification subscriptions with invalid, empty, or partially processed input, depending on downstream processor behavior. As of time of publication, a patched version is not available. |
| @fastify/static versions 8.0.0 through 9.1.0 decode percent-encoded path separators (%2F) before filesystem resolution, while Fastify's router treats them as literal characters. This mismatch allows attackers to bypass route-based middleware or guards that protect files served by @fastify/static. For example, a route guard on a protected path can be circumvented by encoding the path separator in the URL. Upgrade to @fastify/static 9.1.1 to fix this issue. There are no workarounds. |
