| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix possible vport_config NULL pointer deref in remove
Attempting to remove the driver will cause a crash in cases where
the vport failed to initialize. Following trace is from an instance where
the driver failed during an attempt to create a VF:
[ 1661.543624] idpf 0000:84:00.7: Device HW Reset initiated
[ 1722.923726] idpf 0000:84:00.7: Transaction timed-out (op:1 cookie:2900 vc_op:1 salt:29 timeout:60000ms)
[ 1723.353263] BUG: kernel NULL pointer dereference, address: 0000000000000028
...
[ 1723.358472] RIP: 0010:idpf_remove+0x11c/0x200 [idpf]
...
[ 1723.364973] Call Trace:
[ 1723.365475] <TASK>
[ 1723.365972] pci_device_remove+0x42/0xb0
[ 1723.366481] device_release_driver_internal+0x1a9/0x210
[ 1723.366987] pci_stop_bus_device+0x6d/0x90
[ 1723.367488] pci_stop_and_remove_bus_device+0x12/0x20
[ 1723.367971] pci_iov_remove_virtfn+0xbd/0x120
[ 1723.368309] sriov_disable+0x34/0xe0
[ 1723.368643] idpf_sriov_configure+0x58/0x140 [idpf]
[ 1723.368982] sriov_numvfs_store+0xda/0x1c0
Avoid the NULL pointer dereference by adding NULL pointer check for
vport_config[i], before freeing user_config.q_coalesce. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Synchronize Dead CT worker with unbind
Cancel and wait for any Dead CT worker to complete before continuing
with device unbinding. Else the worker will end up using resources freed
by the undind operation.
(cherry picked from commit 492671339114e376aaa38626d637a2751cdef263) |
| Uncontrolled resource consumption in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: sh-sci: fix RSCI FIFO overrun handling
The receive error handling code is shared between RSCI and all other
SCIF port types, but the RSCI overrun_reg is specified as a memory
offset, while for other SCIF types it is an enum value used to index
into the sci_port_params->regs array, as mentioned above the
sci_serial_in() function.
For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call
inside the sci_handle_fifo_overrun() function to index outside the
bounds of the regs array, which currently has a size of 20, as specified
by SCI_NR_REGS.
Because of this, we end up accessing memory outside of RSCI's
rsci_port_params structure, which, when interpreted as a plat_sci_reg,
happens to have a non-zero size, causing the following WARN when
sci_serial_in() is called, as the accidental size does not match the
supported register sizes.
The existence of the overrun_reg needs to be checked because
SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not
present in the regs array.
Avoid calling sci_getreg() for port types which don't use standard
register handling.
Use the ops->read_reg() and ops->write_reg() functions to properly read
and write registers for RSCI, and change the type of the status variable
to accommodate the 32-bit CSR register.
sci_getreg() and sci_serial_in() are also called with overrun_reg in the
sci_mpxed_interrupt() interrupt handler, but that code path is not used
for RSCI, as it does not have a muxed interrupt.
------------[ cut here ]------------
Invalid register access
WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac
Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT
Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT)
pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : sci_serial_in+0x38/0xac
lr : sci_serial_in+0x38/0xac
sp : ffff800080003e80
x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d
x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80
x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000
x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a
x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720
x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720
x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48
x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48
x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80
Call trace:
sci_serial_in+0x38/0xac (P)
sci_handle_fifo_overrun.isra.0+0x70/0x134
sci_er_interrupt+0x50/0x39c
__handle_irq_event_percpu+0x48/0x140
handle_irq_event+0x44/0xb0
handle_fasteoi_irq+0xf4/0x1a0
handle_irq_desc+0x34/0x58
generic_handle_domain_irq+0x1c/0x28
gic_handle_irq+0x4c/0x140
call_on_irq_stack+0x30/0x48
do_interrupt_handler+0x80/0x84
el1_interrupt+0x34/0x68
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
default_idle_call+0x28/0x58 (P)
do_idle+0x1f8/0x250
cpu_startup_entry+0x34/0x3c
rest_init+0xd8/0xe0
console_on_rootfs+0x0/0x6c
__primary_switched+0x88/0x90
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix unsafe locking in the scx_dump_state()
For built with CONFIG_PREEMPT_RT=y kernels, the dump_lock will be converted
sleepable spinlock and not disable-irq, so the following scenarios occur:
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
irq_work/0/27 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&rq->__lock){?...}-{2:2}, at: raw_spin_rq_lock_nested+0x2b/0x40
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0x1e1/0x510
_raw_spin_lock_nested+0x42/0x80
raw_spin_rq_lock_nested+0x2b/0x40
sched_tick+0xae/0x7b0
update_process_times+0x14c/0x1b0
tick_periodic+0x62/0x1f0
tick_handle_periodic+0x48/0xf0
timer_interrupt+0x55/0x80
__handle_irq_event_percpu+0x20a/0x5c0
handle_irq_event_percpu+0x18/0xc0
handle_irq_event+0xb5/0x150
handle_level_irq+0x220/0x460
__common_interrupt+0xa2/0x1e0
common_interrupt+0xb0/0xd0
asm_common_interrupt+0x2b/0x40
_raw_spin_unlock_irqrestore+0x45/0x80
__setup_irq+0xc34/0x1a30
request_threaded_irq+0x214/0x2f0
hpet_time_init+0x3e/0x60
x86_late_time_init+0x5b/0xb0
start_kernel+0x308/0x410
x86_64_start_reservations+0x1c/0x30
x86_64_start_kernel+0x96/0xa0
common_startup_64+0x13e/0x148
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&rq->__lock);
<Interrupt>
lock(&rq->__lock);
*** DEADLOCK ***
stack backtrace:
CPU: 0 UID: 0 PID: 27 Comm: irq_work/0
Call Trace:
<TASK>
dump_stack_lvl+0x8c/0xd0
dump_stack+0x14/0x20
print_usage_bug+0x42e/0x690
mark_lock.part.44+0x867/0xa70
? __pfx_mark_lock.part.44+0x10/0x10
? string_nocheck+0x19c/0x310
? number+0x739/0x9f0
? __pfx_string_nocheck+0x10/0x10
? __pfx_check_pointer+0x10/0x10
? kvm_sched_clock_read+0x15/0x30
? sched_clock_noinstr+0xd/0x20
? local_clock_noinstr+0x1c/0xe0
__lock_acquire+0xc4b/0x62b0
? __pfx_format_decode+0x10/0x10
? __pfx_string+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
? __pfx_vsnprintf+0x10/0x10
lock_acquire+0x1e1/0x510
? raw_spin_rq_lock_nested+0x2b/0x40
? __pfx_lock_acquire+0x10/0x10
? dump_line+0x12e/0x270
? raw_spin_rq_lock_nested+0x20/0x40
_raw_spin_lock_nested+0x42/0x80
? raw_spin_rq_lock_nested+0x2b/0x40
raw_spin_rq_lock_nested+0x2b/0x40
scx_dump_state+0x3b3/0x1270
? finish_task_switch+0x27e/0x840
scx_ops_error_irq_workfn+0x67/0x80
irq_work_single+0x113/0x260
irq_work_run_list.part.3+0x44/0x70
run_irq_workd+0x6b/0x90
? __pfx_run_irq_workd+0x10/0x10
smpboot_thread_fn+0x529/0x870
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x305/0x3f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x40/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
This commit therefore use rq_lock_irqsave/irqrestore() to replace
rq_lock/unlock() in the scx_dump_state(). |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Handle race between rb_move_tail and rb_check_pages
It seems a data race between ring_buffer writing and integrity check.
That is, RB_FLAG of head_page is been updating, while at same time
RB_FLAG was cleared when doing integrity check rb_check_pages():
rb_check_pages() rb_handle_head_page():
-------- --------
rb_head_page_deactivate()
rb_head_page_set_normal()
rb_head_page_activate()
We do intergrity test of the list to check if the list is corrupted and
it is still worth doing it. So, let's refactor rb_check_pages() such that
we no longer clear and set flag during the list sanity checking.
[1] and [2] are the test to reproduce and the crash report respectively.
1:
``` read_trace.sh
while true;
do
# the "trace" file is closed after read
head -1 /sys/kernel/tracing/trace > /dev/null
done
```
``` repro.sh
sysctl -w kernel.panic_on_warn=1
# function tracer will writing enough data into ring_buffer
echo function > /sys/kernel/tracing/current_tracer
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
```
2:
------------[ cut here ]------------
WARNING: CPU: 9 PID: 62 at kernel/trace/ring_buffer.c:2653
rb_move_tail+0x450/0x470
Modules linked in:
CPU: 9 PID: 62 Comm: ksoftirqd/9 Tainted: G W 6.2.0-rc6+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:rb_move_tail+0x450/0x470
Code: ff ff 4c 89 c8 f0 4d 0f b1 02 48 89 c2 48 83 e2 fc 49 39 d0 75 24
83 e0 03 83 f8 02 0f 84 e1 fb ff ff 48 8b 57 10 f0 ff 42 08 <0f> 0b 83
f8 02 0f 84 ce fb ff ff e9 db
RSP: 0018:ffffb5564089bd00 EFLAGS: 00000203
RAX: 0000000000000000 RBX: ffff9db385a2bf81 RCX: ffffb5564089bd18
RDX: ffff9db281110100 RSI: 0000000000000fe4 RDI: ffff9db380145400
RBP: ffff9db385a2bf80 R08: ffff9db385a2bfc0 R09: ffff9db385a2bfc2
R10: ffff9db385a6c000 R11: ffff9db385a2bf80 R12: 0000000000000000
R13: 00000000000003e8 R14: ffff9db281110100 R15: ffffffffbb006108
FS: 0000000000000000(0000) GS:ffff9db3bdcc0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005602323024c8 CR3: 0000000022e0c000 CR4: 00000000000006e0
Call Trace:
<TASK>
ring_buffer_lock_reserve+0x136/0x360
? __do_softirq+0x287/0x2df
? __pfx_rcu_softirq_qs+0x10/0x10
trace_function+0x21/0x110
? __pfx_rcu_softirq_qs+0x10/0x10
? __do_softirq+0x287/0x2df
function_trace_call+0xf6/0x120
0xffffffffc038f097
? rcu_softirq_qs+0x5/0x140
rcu_softirq_qs+0x5/0x140
__do_softirq+0x287/0x2df
run_ksoftirqd+0x2a/0x30
smpboot_thread_fn+0x188/0x220
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0xe7/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
---[ end trace 0000000000000000 ]---
[ crash report and test reproducer credit goes to Zheng Yejian] |
| In the Linux kernel, the following vulnerability has been resolved:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()
which causes the code to proceed with NULL clock pointers. The current
logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both
valid pointers and NULL, leading to potential NULL pointer dereference
in clk_get_rate().
Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:
"The error code within @ptr if it is an error pointer; 0 otherwise."
This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL
pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)
when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be
called when of_clk_get() returns NULL.
Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid
pointers, preventing potential NULL pointer dereference in clk_get_rate(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ
XDP programs can change the layout of an xdp_buff through
bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver
cannot assume the size of the linear data area nor fragments. Fix the
bug in mlx5 by generating skb according to xdp_buff after XDP programs
run.
Currently, when handling multi-buf XDP, the mlx5 driver assumes the
layout of an xdp_buff to be unchanged. That is, the linear data area
continues to be empty and fragments remain the same. This may cause
the driver to generate erroneous skb or triggering a kernel
warning. When an XDP program added linear data through
bpf_xdp_adjust_head(), the linear data will be ignored as
mlx5e_build_linear_skb() builds an skb without linear data and then
pull data from fragments to fill the linear data area. When an XDP
program has shrunk the non-linear data through bpf_xdp_adjust_tail(),
the delta passed to __pskb_pull_tail() may exceed the actual nonlinear
data size and trigger the BUG_ON in it.
To fix the issue, first record the original number of fragments. If the
number of fragments changes after the XDP program runs, rewind the end
fragment pointer by the difference and recalculate the truesize. Then,
build the skb with the linear data area matching the xdp_buff. Finally,
only pull data in if there is non-linear data and fill the linear part
up to 256 bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: fix the deadlock of enetc_mdio_lock
After applying the workaround for err050089, the LS1028A platform
experiences RCU stalls on RT kernel. This issue is caused by the
recursive acquisition of the read lock enetc_mdio_lock. Here list some
of the call stacks identified under the enetc_poll path that may lead to
a deadlock:
enetc_poll
-> enetc_lock_mdio
-> enetc_clean_rx_ring OR napi_complete_done
-> napi_gro_receive
-> enetc_start_xmit
-> enetc_lock_mdio
-> enetc_map_tx_buffs
-> enetc_unlock_mdio
-> enetc_unlock_mdio
After enetc_poll acquires the read lock, a higher-priority writer attempts
to acquire the lock, causing preemption. The writer detects that a
read lock is already held and is scheduled out. However, readers under
enetc_poll cannot acquire the read lock again because a writer is already
waiting, leading to a thread hang.
Currently, the deadlock is avoided by adjusting enetc_lock_mdio to prevent
recursive lock acquisition. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver
After restructuring and splitting the HDMI codec driver code, each
HDMI codec driver contains the own build_controls and build_pcms ops.
A copy-n-paste error put the wrong entries for nvhdmi-mcp driver; both
build_controls and build_pcms are swapped. Unfortunately both
callbacks have the very same form, and the compiler didn't complain
it, either. This resulted in a NULL dereference because the PCM
instance hasn't been initialized at calling the build_controls
callback.
Fix it by passing the proper entries. |
| In the Linux kernel, the following vulnerability has been resolved:
slab: Avoid race on slab->obj_exts in alloc_slab_obj_exts
If two competing threads enter alloc_slab_obj_exts() and one of them
fails to allocate the object extension vector, it might override the
valid slab->obj_exts allocated by the other thread with
OBJEXTS_ALLOC_FAIL. This will cause the thread that lost this race and
expects a valid pointer to dereference a NULL pointer later on.
Update slab->obj_exts atomically using cmpxchg() to avoid
slab->obj_exts overrides by racing threads.
Thanks for Vlastimil and Suren's help with debugging. |
| In the Linux kernel, the following vulnerability has been resolved:
crash: fix crashkernel resource shrink
When crashkernel is configured with a high reservation, shrinking its
value below the low crashkernel reservation causes two issues:
1. Invalid crashkernel resource objects
2. Kernel crash if crashkernel shrinking is done twice
For example, with crashkernel=200M,high, the kernel reserves 200MB of high
memory and some default low memory (say 256MB). The reservation appears
as:
cat /proc/iomem | grep -i crash
af000000-beffffff : Crash kernel
433000000-43f7fffff : Crash kernel
If crashkernel is then shrunk to 50MB (echo 52428800 >
/sys/kernel/kexec_crash_size), /proc/iomem still shows 256MB reserved:
af000000-beffffff : Crash kernel
Instead, it should show 50MB:
af000000-b21fffff : Crash kernel
Further shrinking crashkernel to 40MB causes a kernel crash with the
following trace (x86):
BUG: kernel NULL pointer dereference, address: 0000000000000038
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
<snip...>
Call Trace: <TASK>
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15a/0x2f0
? search_module_extables+0x19/0x60
? search_bpf_extables+0x5f/0x80
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? __release_resource+0xd/0xb0
release_resource+0x26/0x40
__crash_shrink_memory+0xe5/0x110
crash_shrink_memory+0x12a/0x190
kexec_crash_size_store+0x41/0x80
kernfs_fop_write_iter+0x141/0x1f0
vfs_write+0x294/0x460
ksys_write+0x6d/0xf0
<snip...>
This happens because __crash_shrink_memory()/kernel/crash_core.c
incorrectly updates the crashk_res resource object even when
crashk_low_res should be updated.
Fix this by ensuring the correct crashkernel resource object is updated
when shrinking crashkernel memory. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix null pointer dereference in bnxt_bs_trace_check_wrap()
With older FW, we may get the ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER
for FW trace data type that has not been initialized. This will result
in a crash in bnxt_bs_trace_type_wrap(). Add a guard to check for a
valid magic_byte pointer before proceeding. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Cache streams targeting link when performing LT automation
[WHY]
Last LT automation update can cause crash by referencing current_state and
calling into dc_update_planes_and_stream which may clobber current_state.
[HOW]
Cache relevant stream pointers and iterate through them instead of relying
on the current_state. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Add devm release action to safely tear down CT
When a buffer object (BO) is allocated with the XE_BO_FLAG_GGTT_INVALIDATE
flag, the driver initiates TLB invalidation requests via the CTB mechanism
while releasing the BO. However a premature release of the CTB BO can lead
to system crashes, as observed in:
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:h2g_write+0x2f3/0x7c0 [xe]
Call Trace:
guc_ct_send_locked+0x8b/0x670 [xe]
xe_guc_ct_send_locked+0x19/0x60 [xe]
send_tlb_invalidation+0xb4/0x460 [xe]
xe_gt_tlb_invalidation_ggtt+0x15e/0x2e0 [xe]
ggtt_invalidate_gt_tlb.part.0+0x16/0x90 [xe]
ggtt_node_remove+0x110/0x140 [xe]
xe_ggtt_node_remove+0x40/0xa0 [xe]
xe_ggtt_remove_bo+0x87/0x250 [xe]
Introduce a devm-managed release action during xe_guc_ct_init() and
xe_guc_ct_init_post_hwconfig() to ensure proper CTB disablement before
resource deallocation, preventing the use-after-free scenario. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmemmap/devdax: fix kernel crash when probing devdax devices
commit 4917f55b4ef9 ("mm/sparse-vmemmap: improve memory savings for
compound devmaps") added support for using optimized vmmemap for devdax
devices. But how vmemmap mappings are created are architecture specific.
For example, powerpc with hash translation doesn't have vmemmap mappings
in init_mm page table instead they are bolted table entries in the
hardware page table
vmemmap_populate_compound_pages() used by vmemmap optimization code is not
aware of these architecture-specific mapping. Hence allow architecture to
opt for this feature. I selected architectures supporting
HUGETLB_PAGE_OPTIMIZE_VMEMMAP option as also supporting this feature.
This patch fixes the below crash on ppc64.
BUG: Unable to handle kernel data access on write at 0xc00c000100400038
Faulting instruction address: 0xc000000001269d90
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc5-150500.34-default+ #2 5c90a668b6bbd142599890245c2fb5de19d7d28a
Hardware name: IBM,9009-42G POWER9 (raw) 0x4e0202 0xf000005 of:IBM,FW950.40 (VL950_099) hv:phyp pSeries
NIP: c000000001269d90 LR: c0000000004c57d4 CTR: 0000000000000000
REGS: c000000003632c30 TRAP: 0300 Not tainted (6.3.0-rc5-150500.34-default+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24842228 XER: 00000000
CFAR: c0000000004c57d0 DAR: c00c000100400038 DSISR: 42000000 IRQMASK: 0
....
NIP [c000000001269d90] __init_single_page.isra.74+0x14/0x4c
LR [c0000000004c57d4] __init_zone_device_page+0x44/0xd0
Call Trace:
[c000000003632ed0] [c000000003632f60] 0xc000000003632f60 (unreliable)
[c000000003632f10] [c0000000004c5ca0] memmap_init_zone_device+0x170/0x250
[c000000003632fe0] [c0000000005575f8] memremap_pages+0x2c8/0x7f0
[c0000000036330c0] [c000000000557b5c] devm_memremap_pages+0x3c/0xa0
[c000000003633100] [c000000000d458a8] dev_dax_probe+0x108/0x3e0
[c0000000036331a0] [c000000000d41430] dax_bus_probe+0xb0/0x140
[c0000000036331d0] [c000000000cef27c] really_probe+0x19c/0x520
[c000000003633260] [c000000000cef6b4] __driver_probe_device+0xb4/0x230
[c0000000036332e0] [c000000000cef888] driver_probe_device+0x58/0x120
[c000000003633320] [c000000000cefa6c] __device_attach_driver+0x11c/0x1e0
[c0000000036333a0] [c000000000cebc58] bus_for_each_drv+0xa8/0x130
[c000000003633400] [c000000000ceefcc] __device_attach+0x15c/0x250
[c0000000036334a0] [c000000000ced458] bus_probe_device+0x108/0x110
[c0000000036334f0] [c000000000ce92dc] device_add+0x7fc/0xa10
[c0000000036335b0] [c000000000d447c8] devm_create_dev_dax+0x1d8/0x530
[c000000003633640] [c000000000d46b60] __dax_pmem_probe+0x200/0x270
[c0000000036337b0] [c000000000d46bf0] dax_pmem_probe+0x20/0x70
[c0000000036337d0] [c000000000d2279c] nvdimm_bus_probe+0xac/0x2b0
[c000000003633860] [c000000000cef27c] really_probe+0x19c/0x520
[c0000000036338f0] [c000000000cef6b4] __driver_probe_device+0xb4/0x230
[c000000003633970] [c000000000cef888] driver_probe_device+0x58/0x120
[c0000000036339b0] [c000000000cefd08] __driver_attach+0x1d8/0x240
[c000000003633a30] [c000000000cebb04] bus_for_each_dev+0xb4/0x130
[c000000003633a90] [c000000000cee564] driver_attach+0x34/0x50
[c000000003633ab0] [c000000000ced878] bus_add_driver+0x218/0x300
[c000000003633b40] [c000000000cf1144] driver_register+0xa4/0x1b0
[c000000003633bb0] [c000000000d21a0c] __nd_driver_register+0x5c/0x100
[c000000003633c10] [c00000000206a2e8] dax_pmem_init+0x34/0x48
[c000000003633c30] [c0000000000132d0] do_one_initcall+0x60/0x320
[c000000003633d00] [c0000000020051b0] kernel_init_freeable+0x360/0x400
[c000000003633de0] [c000000000013764] kernel_init+0x34/0x1d0
[c000000003633e50] [c00000000000de14] ret_from_kernel_thread+0x5c/0x64 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mdio: Check regmap pointer returned by device_node_to_regmap()
The call to device_node_to_regmap() in airoha_mdio_probe() can return
an ERR_PTR() if regmap initialization fails. Currently, the driver
stores the pointer without validation, which could lead to a crash
if it is later dereferenced.
Add an IS_ERR() check and return the corresponding error code to make
the probe path more robust. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix GEM free for imported dma-bufs
Imported dma-bufs also have obj->resv != &obj->_resv. So we should
check both this condition in addition to flags for handling the
_NO_SHARE case.
Fixes this splat that was reported with IRIS video playback:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 2040 at drivers/gpu/drm/msm/msm_gem.c:1127 msm_gem_free_object+0x1f8/0x264 [msm]
CPU: 3 UID: 1000 PID: 2040 Comm: .gnome-shell-wr Not tainted 6.17.0-rc7 #1 PREEMPT
pstate: 81400005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : msm_gem_free_object+0x1f8/0x264 [msm]
lr : msm_gem_free_object+0x138/0x264 [msm]
sp : ffff800092a1bb30
x29: ffff800092a1bb80 x28: ffff800092a1bce8 x27: ffffbc702dbdbe08
x26: 0000000000000008 x25: 0000000000000009 x24: 00000000000000a6
x23: ffff00083c72f850 x22: ffff00083c72f868 x21: ffff00087e69f200
x20: ffff00087e69f330 x19: ffff00084d157ae0 x18: 0000000000000000
x17: 0000000000000000 x16: ffffbc704bd46b80 x15: 0000ffffd0959540
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: ffffbc702e6cdb48 x10: 0000000000000000 x9 : 000000000000003f
x8 : ffff800092a1ba90 x7 : 0000000000000000 x6 : 0000000000000020
x5 : ffffbc704bd46c40 x4 : fffffdffe102cf60 x3 : 0000000000400032
x2 : 0000000000020000 x1 : ffff00087e6978e8 x0 : ffff00087e6977e8
Call trace:
msm_gem_free_object+0x1f8/0x264 [msm] (P)
drm_gem_object_free+0x1c/0x30 [drm]
drm_gem_object_handle_put_unlocked+0x138/0x150 [drm]
drm_gem_object_release_handle+0x5c/0xcc [drm]
drm_gem_handle_delete+0x68/0xbc [drm]
drm_gem_close_ioctl+0x34/0x40 [drm]
drm_ioctl_kernel+0xc0/0x130 [drm]
drm_ioctl+0x360/0x4e0 [drm]
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xec
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
Patchwork: https://patchwork.freedesktop.org/patch/676273/ |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix out-of-bounds access in ipv6_find_tlv()
optlen is fetched without checking whether there is more than one byte to parse.
It can lead to out-of-bounds access.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix crash in process_v2_sparse_read() for encrypted directories
The crash in process_v2_sparse_read() for fscrypt-encrypted directories
has been reported. Issue takes place for Ceph msgr2 protocol in secure
mode. It can be reproduced by the steps:
sudo mount -t ceph :/ /mnt/cephfs/ -o name=admin,fs=cephfs,ms_mode=secure
(1) mkdir /mnt/cephfs/fscrypt-test-3
(2) cp area_decrypted.tar /mnt/cephfs/fscrypt-test-3
(3) fscrypt encrypt --source=raw_key --key=./my.key /mnt/cephfs/fscrypt-test-3
(4) fscrypt lock /mnt/cephfs/fscrypt-test-3
(5) fscrypt unlock --key=my.key /mnt/cephfs/fscrypt-test-3
(6) cat /mnt/cephfs/fscrypt-test-3/area_decrypted.tar
(7) Issue has been triggered
[ 408.072247] ------------[ cut here ]------------
[ 408.072251] WARNING: CPU: 1 PID: 392 at net/ceph/messenger_v2.c:865
ceph_con_v2_try_read+0x4b39/0x72f0
[ 408.072267] Modules linked in: intel_rapl_msr intel_rapl_common
intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery
pmt_class intel_pmc_ssram_telemetry intel_vsec kvm_intel joydev kvm irqbypass
polyval_clmulni ghash_clmulni_intel aesni_intel rapl input_leds psmouse
serio_raw i2c_piix4 vga16fb bochs vgastate i2c_smbus floppy mac_hid qemu_fw_cfg
pata_acpi sch_fq_codel rbd msr parport_pc ppdev lp parport efi_pstore
[ 408.072304] CPU: 1 UID: 0 PID: 392 Comm: kworker/1:3 Not tainted 6.17.0-rc7+
[ 408.072307] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.17.0-5.fc42 04/01/2014
[ 408.072310] Workqueue: ceph-msgr ceph_con_workfn
[ 408.072314] RIP: 0010:ceph_con_v2_try_read+0x4b39/0x72f0
[ 408.072317] Code: c7 c1 20 f0 d4 ae 50 31 d2 48 c7 c6 60 27 d5 ae 48 c7 c7 f8
8e 6f b0 68 60 38 d5 ae e8 00 47 61 fe 48 83 c4 18 e9 ac fc ff ff <0f> 0b e9 06
fe ff ff 4c 8b 9d 98 fd ff ff 0f 84 64 e7 ff ff 89 85
[ 408.072319] RSP: 0018:ffff88811c3e7a30 EFLAGS: 00010246
[ 408.072322] RAX: ffffed1024874c6f RBX: ffffea00042c2b40 RCX: 0000000000000f38
[ 408.072324] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 408.072325] RBP: ffff88811c3e7ca8 R08: 0000000000000000 R09: 00000000000000c8
[ 408.072326] R10: 00000000000000c8 R11: 0000000000000000 R12: 00000000000000c8
[ 408.072327] R13: dffffc0000000000 R14: ffff8881243a6030 R15: 0000000000003000
[ 408.072329] FS: 0000000000000000(0000) GS:ffff88823eadf000(0000)
knlGS:0000000000000000
[ 408.072331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 408.072332] CR2: 000000c0003c6000 CR3: 000000010c106005 CR4: 0000000000772ef0
[ 408.072336] PKRU: 55555554
[ 408.072337] Call Trace:
[ 408.072338] <TASK>
[ 408.072340] ? sched_clock_noinstr+0x9/0x10
[ 408.072344] ? __pfx_ceph_con_v2_try_read+0x10/0x10
[ 408.072347] ? _raw_spin_unlock+0xe/0x40
[ 408.072349] ? finish_task_switch.isra.0+0x15d/0x830
[ 408.072353] ? __kasan_check_write+0x14/0x30
[ 408.072357] ? mutex_lock+0x84/0xe0
[ 408.072359] ? __pfx_mutex_lock+0x10/0x10
[ 408.072361] ceph_con_workfn+0x27e/0x10e0
[ 408.072364] ? metric_delayed_work+0x311/0x2c50
[ 408.072367] process_one_work+0x611/0xe20
[ 408.072371] ? __kasan_check_write+0x14/0x30
[ 408.072373] worker_thread+0x7e3/0x1580
[ 408.072375] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 408.072378] ? __pfx_worker_thread+0x10/0x10
[ 408.072381] kthread+0x381/0x7a0
[ 408.072383] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 408.072385] ? __pfx_kthread+0x10/0x10
[ 408.072387] ? __kasan_check_write+0x14/0x30
[ 408.072389] ? recalc_sigpending+0x160/0x220
[ 408.072392] ? _raw_spin_unlock_irq+0xe/0x50
[ 408.072394] ? calculate_sigpending+0x78/0xb0
[ 408.072395] ? __pfx_kthread+0x10/0x10
[ 408.072397] ret_from_fork+0x2b6/0x380
[ 408.072400] ? __pfx_kthread+0x10/0x10
[ 408.072402] ret_from_fork_asm+0x1a/0x30
[ 408.072406] </TASK>
[ 408.072407] ---[ end trace 0000000000000000 ]---
[ 408.072418] Oops: general protection fault, probably for non-canonical
address 0xdffffc00000000
---truncated--- |
