Filtered by vendor Linux
Subscriptions
Total
12925 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-27063 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: leds: trigger: netdev: Fix kernel panic on interface rename trig notify Commit d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode") in the various changes, reworked the way to set the LINKUP mode in commit cee4bd16c319 ("leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename") and moved it to a generic function. This changed the logic where, in the previous implementation the dev from the trigger event was used to check if the carrier was ok, but in the new implementation with the generic function, the dev in trigger_data is used instead. This is problematic and cause a possible kernel panic due to the fact that the dev in the trigger_data still reference the old one as the new one (passed from the trigger event) still has to be hold and saved in the trigger_data struct (done in the NETDEV_REGISTER case). On calling of get_device_state(), an invalid net_dev is used and this cause a kernel panic. To handle this correctly, move the call to get_device_state() after the new net_dev is correctly set in trigger_data (in the NETDEV_REGISTER case) and correctly parse the new dev. | ||||
| CVE-2024-58006 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Prevent changing BAR size/flags in pci_epc_set_bar() In commit 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address") set_bar() was modified to support dynamically changing the backing physical address of a BAR that was already configured. This means that set_bar() can be called twice, without ever calling clear_bar() (as calling clear_bar() would clear the BAR's PCI address assigned by the host). This can only be done if the new BAR size/flags does not differ from the existing BAR configuration. Add these missing checks. If we allow set_bar() to set e.g. a new BAR size that differs from the existing BAR size, the new address translation range will be smaller than the BAR size already determined by the host, which would mean that a read past the new BAR size would pass the iATU untranslated, which could allow the host to read memory not belonging to the new struct pci_epf_bar. While at it, add comments which clarifies the support for dynamically changing the physical address of a BAR. (Which was also missing.) | ||||
| CVE-2024-40992 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix responder length checking for UD request packets According to the IBA specification: If a UD request packet is detected with an invalid length, the request shall be an invalid request and it shall be silently dropped by the responder. The responder then waits for a new request packet. commit 689c5421bfe0 ("RDMA/rxe: Fix incorrect responder length checking") defers responder length check for UD QPs in function `copy_data`. But it introduces a regression issue for UD QPs. When the packet size is too large to fit in the receive buffer. `copy_data` will return error code -EINVAL. Then `send_data_in` will return RESPST_ERR_MALFORMED_WQE. UD QP will transfer into ERROR state. | ||||
| CVE-2022-49814 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kcm: close race conditions on sk_receive_queue sk->sk_receive_queue is protected by skb queue lock, but for KCM sockets its RX path takes mux->rx_lock to protect more than just skb queue. However, kcm_recvmsg() still only grabs the skb queue lock, so race conditions still exist. We can teach kcm_recvmsg() to grab mux->rx_lock too but this would introduce a potential performance regression as struct kcm_mux can be shared by multiple KCM sockets. So we have to enforce skb queue lock in requeue_rx_msgs() and handle skb peek case carefully in kcm_wait_data(). Fortunately, skb_recv_datagram() already handles it nicely and is widely used by other sockets, we can just switch to skb_recv_datagram() after getting rid of the unnecessary sock lock in kcm_recvmsg() and kcm_splice_read(). Side note: SOCK_DONE is not used by KCM sockets, so it is safe to get rid of this check too. I ran the original syzbot reproducer for 30 min without seeing any issue. | ||||
| CVE-2021-47507 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix nsfd startup race (again) Commit bd5ae9288d64 ("nfsd: register pernet ops last, unregister first") has re-opened rpc_pipefs_event() race against nfsd_net_id registration (register_pernet_subsys()) which has been fixed by commit bb7ffbf29e76 ("nfsd: fix nsfd startup race triggering BUG_ON"). Restore the order of register_pernet_subsys() vs register_cld_notifier(). Add WARN_ON() to prevent a future regression. Crash info: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000012 CPU: 8 PID: 345 Comm: mount Not tainted 5.4.144-... #1 pc : rpc_pipefs_event+0x54/0x120 [nfsd] lr : rpc_pipefs_event+0x48/0x120 [nfsd] Call trace: rpc_pipefs_event+0x54/0x120 [nfsd] blocking_notifier_call_chain rpc_fill_super get_tree_keyed rpc_fs_get_tree vfs_get_tree do_mount ksys_mount __arm64_sys_mount el0_svc_handler el0_svc | ||||
| CVE-2022-49852 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: process: fix kernel info leakage thread_struct's s[12] may contain random kernel memory content, which may be finally leaked to userspace. This is a security hole. Fix it by clearing the s[12] array in thread_struct when fork. As for kthread case, it's better to clear the s[12] array as well. | ||||
| CVE-2022-49624 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: atlantic: remove aq_nic_deinit() when resume aq_nic_deinit() has been called while suspending, so we don't have to call it again on resume. Actually, call it again leads to another hang issue when resuming from S3. Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992345] Call Trace: Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992346] <TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992348] aq_nic_deinit+0xb4/0xd0 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992356] aq_pm_thaw+0x7f/0x100 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992362] pci_pm_resume+0x5c/0x90 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992366] ? pci_pm_thaw+0x80/0x80 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992368] dpm_run_callback+0x4e/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992371] device_resume+0xad/0x200 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992373] async_resume+0x1e/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992374] async_run_entry_fn+0x33/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992377] process_one_work+0x220/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992380] worker_thread+0x4d/0x3f0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992382] ? process_one_work+0x3c0/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992384] kthread+0x12a/0x150 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992386] ? set_kthread_struct+0x40/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992387] ret_from_fork+0x22/0x30 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992391] </TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992392] ---[ end trace 1ec8c79604ed5e0d ]--- Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992394] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992397] atlantic 0000:02:00.0: PM: failed to resume async: error -110 | ||||
| CVE-2023-52677 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: Check if the code to patch lies in the exit section Otherwise we fall through to vmalloc_to_page() which panics since the address does not lie in the vmalloc region. | ||||
| CVE-2024-37026 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Only use reserved BCS instances for usm migrate exec queue The GuC context scheduling queue is 2 entires deep, thus it is possible for a migration job to be stuck behind a fault if migration exec queue shares engines with user jobs. This can deadlock as the migrate exec queue is required to service page faults. Avoid deadlock by only using reserved BCS instances for usm migrate exec queue. (cherry picked from commit 04f4a70a183a688a60fe3882d6e4236ea02cfc67) | ||||
| CVE-2024-41043 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: drop bogus WARN_ON Happens when rules get flushed/deleted while packet is out, so remove this WARN_ON. This WARN exists in one form or another since v4.14, no need to backport this to older releases, hence use a more recent fixes tag. | ||||
| CVE-2022-49188 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region The device_node pointer is returned by of_parse_phandle() or of_get_child_by_name() with refcount incremented. We should use of_node_put() on it when done. This function only call of_node_put(node) when of_address_to_resource succeeds, missing error cases. | ||||
| CVE-2023-53029 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt The commit 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free") uses the get/put_cpu() to protect the usage of percpu pointer in ->aura_freeptr() callback, but it also unnecessarily disable the preemption for the blockable memory allocation. The commit 87b93b678e95 ("octeontx2-pf: Avoid use of GFP_KERNEL in atomic context") tried to fix these sleep inside atomic warnings. But it only fix the one for the non-rt kernel. For the rt kernel, we still get the similar warnings like below. BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by swapper/0/1: #0: ffff800009fc5fe8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30 #1: ffff000100c276c0 (&mbox->lock){+.+.}-{3:3}, at: otx2_init_hw_resources+0x8c/0x3a4 #2: ffffffbfef6537e0 (&cpu_rcache->lock){+.+.}-{2:2}, at: alloc_iova_fast+0x1ac/0x2ac Preemption disabled at: [<ffff800008b1908c>] otx2_rq_aura_pool_init+0x14c/0x284 CPU: 20 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc3-rt1-yocto-preempt-rt #1 Hardware name: Marvell OcteonTX CN96XX board (DT) Call trace: dump_backtrace.part.0+0xe8/0xf4 show_stack+0x20/0x30 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x224 rt_spin_lock+0x64/0x110 alloc_iova_fast+0x1ac/0x2ac iommu_dma_alloc_iova+0xd4/0x110 __iommu_dma_map+0x80/0x144 iommu_dma_map_page+0xe8/0x260 dma_map_page_attrs+0xb4/0xc0 __otx2_alloc_rbuf+0x90/0x150 otx2_rq_aura_pool_init+0x1c8/0x284 otx2_init_hw_resources+0xe4/0x3a4 otx2_open+0xf0/0x610 __dev_open+0x104/0x224 __dev_change_flags+0x1e4/0x274 dev_change_flags+0x2c/0x7c ic_open_devs+0x124/0x2f8 ip_auto_config+0x180/0x42c do_one_initcall+0x90/0x4dc do_basic_setup+0x10c/0x14c kernel_init_freeable+0x10c/0x13c kernel_init+0x2c/0x140 ret_from_fork+0x10/0x20 Of course, we can shuffle the get/put_cpu() to only wrap the invocation of ->aura_freeptr() as what commit 87b93b678e95 does. But there are only two ->aura_freeptr() callbacks, otx2_aura_freeptr() and cn10k_aura_freeptr(). There is no usage of perpcu variable in the otx2_aura_freeptr() at all, so the get/put_cpu() seems redundant to it. We can move the get/put_cpu() into the corresponding callback which really has the percpu variable usage and avoid the sprinkling of get/put_cpu() in several places. | ||||
| CVE-2022-49292 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: oss: Fix PCM OSS buffer allocation overflow We've got syzbot reports hitting INT_MAX overflow at vmalloc() allocation that is called from snd_pcm_plug_alloc(). Although we apply the restrictions to input parameters, it's based only on the hw_params of the underlying PCM device. Since the PCM OSS layer allocates a temporary buffer for the data conversion, the size may become unexpectedly large when more channels or higher rates is given; in the reported case, it went over INT_MAX, hence it hits WARN_ON(). This patch is an attempt to avoid such an overflow and an allocation for too large buffers. First off, it adds the limit of 1MB as the upper bound for period bytes. This must be large enough for all use cases, and we really don't want to handle a larger temporary buffer than this size. The size check is performed at two places, where the original period bytes is calculated and where the plugin buffer size is calculated. In addition, the driver uses array_size() and array3_size() for multiplications to catch overflows for the converted period size and buffer bytes. | ||||
| CVE-2022-49617 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof_sdw: handle errors on card registration If the card registration fails, typically because of deferred probes, the device properties added for headset codecs are not removed, which leads to kernel oopses in driver bind/unbind tests. We already clean-up the device properties when the card is removed, this code can be moved as a helper and called upon card registration errors. | ||||
| CVE-2024-38610 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drivers/virt/acrn: fix PFNMAP PTE checks in acrn_vm_ram_map() Patch series "mm: follow_pte() improvements and acrn follow_pte() fixes". Patch #1 fixes a bunch of issues I spotted in the acrn driver. It compiles, that's all I know. I'll appreciate some review and testing from acrn folks. Patch #2+#3 improve follow_pte(), passing a VMA instead of the MM, adding more sanity checks, and improving the documentation. Gave it a quick test on x86-64 using VM_PAT that ends up using follow_pte(). This patch (of 3): We currently miss handling various cases, resulting in a dangerous follow_pte() (previously follow_pfn()) usage. (1) We're not checking PTE write permissions. Maybe we should simply always require pte_write() like we do for pin_user_pages_fast(FOLL_WRITE)? Hard to tell, so let's check for ACRN_MEM_ACCESS_WRITE for now. (2) We're not rejecting refcounted pages. As we are not using MMU notifiers, messing with refcounted pages is dangerous and can result in use-after-free. Let's make sure to reject them. (3) We are only looking at the first PTE of a bigger range. We only lookup a single PTE, but memmap->len may span a larger area. Let's loop over all involved PTEs and make sure the PFN range is actually contiguous. Reject everything else: it couldn't have worked either way, and rather made use access PFNs we shouldn't be accessing. | ||||
| CVE-2024-58079 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix crash during unbind if gpio unit is in use We used the wrong device for the device managed functions. We used the usb device, when we should be using the interface device. If we unbind the driver from the usb interface, the cleanup functions are never called. In our case, the IRQ is never disabled. If an IRQ is triggered, it will try to access memory sections that are already free, causing an OOPS. We cannot use the function devm_request_threaded_irq here. The devm_* clean functions may be called after the main structure is released by uvc_delete. Luckily this bug has small impact, as it is only affected by devices with gpio units and the user has to unbind the device, a disconnect will not trigger this error. | ||||
| CVE-2024-41081 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ila: block BH in ila_output() As explained in commit 1378817486d6 ("tipc: block BH before using dst_cache"), net/core/dst_cache.c helpers need to be called with BH disabled. ila_output() is called from lwtunnel_output() possibly from process context, and under rcu_read_lock(). We might be interrupted by a softirq, re-enter ila_output() and corrupt dst_cache data structures. Fix the race by using local_bh_disable(). | ||||
| CVE-2022-49658 | 1 Linux | 1 Kernel | 2025-07-12 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals Kuee reported a corner case where the tnum becomes constant after the call to __reg_bound_offset(), but the register's bounds are not, that is, its min bounds are still not equal to the register's max bounds. This in turn allows to leak pointers through turning a pointer register as is into an unknown scalar via adjust_ptr_min_max_vals(). Before: func#0 @0 0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) 1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) 2: (87) r3 = -r3 ; R3_w=scalar() 3: (87) r3 = -r3 ; R3_w=scalar() 4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881) 5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 6: (95) exit from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 8: (95) exit from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)) <--- [*] 10: (95) exit What can be seen here is that R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) after the operation R3 += -32767 results in a 'malformed' constant, that is, R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)). Intersecting with var_off has not been done at that point via __update_reg_bounds(), which would have improved the umax to be equal to umin. Refactor the tnum <> min/max bounds information flow into a reg_bounds_sync() helper and use it consistently everywhere. After the fix, bounds have been corrected to R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) and thus the register is regarded as a 'proper' constant scalar of 0. After: func#0 @0 0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) 1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) 2: (87) r3 = -r3 ; R3_w=scalar() 3: (87) r3 = -r3 ; R3_w=scalar() 4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881) 5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 6: (95) exit from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 8: (95) exit from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0 ---truncated--- | ||||
| CVE-2022-49098 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Fix potential crash on module unload The vmbus driver relies on the panic notifier infrastructure to perform some operations when a panic event is detected. Since vmbus can be built as module, it is required that the driver handles both registering and unregistering such panic notifier callback. After commit 74347a99e73a ("x86/Hyper-V: Unload vmbus channel in hv panic callback") though, the panic notifier registration is done unconditionally in the module initialization routine whereas the unregistering procedure is conditionally guarded and executes only if HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE capability is set. This patch fixes that by unconditionally unregistering the panic notifier in the module's exit routine as well. | ||||
| CVE-2024-53687 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: Fix IPIs usage in kfence_protect_page() flush_tlb_kernel_range() may use IPIs to flush the TLBs of all the cores, which triggers the following warning when the irqs are disabled: [ 3.455330] WARNING: CPU: 1 PID: 0 at kernel/smp.c:815 smp_call_function_many_cond+0x452/0x520 [ 3.456647] Modules linked in: [ 3.457218] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.12.0-rc7-00010-g91d3de7240b8 #1 [ 3.457416] Hardware name: QEMU QEMU Virtual Machine, BIOS [ 3.457633] epc : smp_call_function_many_cond+0x452/0x520 [ 3.457736] ra : on_each_cpu_cond_mask+0x1e/0x30 [ 3.457786] epc : ffffffff800b669a ra : ffffffff800b67c2 sp : ff2000000000bb50 [ 3.457824] gp : ffffffff815212b8 tp : ff6000008014f080 t0 : 000000000000003f [ 3.457859] t1 : ffffffff815221e0 t2 : 000000000000000f s0 : ff2000000000bc10 [ 3.457920] s1 : 0000000000000040 a0 : ffffffff815221e0 a1 : 0000000000000001 [ 3.457953] a2 : 0000000000010000 a3 : 0000000000000003 a4 : 0000000000000000 [ 3.458006] a5 : 0000000000000000 a6 : ffffffffffffffff a7 : 0000000000000000 [ 3.458042] s2 : ffffffff815223be s3 : 00fffffffffff000 s4 : ff600001ffe38fc0 [ 3.458076] s5 : ff600001ff950d00 s6 : 0000000200000120 s7 : 0000000000000001 [ 3.458109] s8 : 0000000000000001 s9 : ff60000080841ef0 s10: 0000000000000001 [ 3.458141] s11: ffffffff81524812 t3 : 0000000000000001 t4 : ff60000080092bc0 [ 3.458172] t5 : 0000000000000000 t6 : ff200000000236d0 [ 3.458203] status: 0000000200000100 badaddr: ffffffff800b669a cause: 0000000000000003 [ 3.458373] [<ffffffff800b669a>] smp_call_function_many_cond+0x452/0x520 [ 3.458593] [<ffffffff800b67c2>] on_each_cpu_cond_mask+0x1e/0x30 [ 3.458625] [<ffffffff8000e4ca>] __flush_tlb_range+0x118/0x1ca [ 3.458656] [<ffffffff8000e6b2>] flush_tlb_kernel_range+0x1e/0x26 [ 3.458683] [<ffffffff801ea56a>] kfence_protect+0xc0/0xce [ 3.458717] [<ffffffff801e9456>] kfence_guarded_free+0xc6/0x1c0 [ 3.458742] [<ffffffff801e9d6c>] __kfence_free+0x62/0xc6 [ 3.458764] [<ffffffff801c57d8>] kfree+0x106/0x32c [ 3.458786] [<ffffffff80588cf2>] detach_buf_split+0x188/0x1a8 [ 3.458816] [<ffffffff8058708c>] virtqueue_get_buf_ctx+0xb6/0x1f6 [ 3.458839] [<ffffffff805871da>] virtqueue_get_buf+0xe/0x16 [ 3.458880] [<ffffffff80613d6a>] virtblk_done+0x5c/0xe2 [ 3.458908] [<ffffffff8058766e>] vring_interrupt+0x6a/0x74 [ 3.458930] [<ffffffff800747d8>] __handle_irq_event_percpu+0x7c/0xe2 [ 3.458956] [<ffffffff800748f0>] handle_irq_event+0x3c/0x86 [ 3.458978] [<ffffffff800786cc>] handle_simple_irq+0x9e/0xbe [ 3.459004] [<ffffffff80073934>] generic_handle_domain_irq+0x1c/0x2a [ 3.459027] [<ffffffff804bf87c>] imsic_handle_irq+0xba/0x120 [ 3.459056] [<ffffffff80073934>] generic_handle_domain_irq+0x1c/0x2a [ 3.459080] [<ffffffff804bdb76>] riscv_intc_aia_irq+0x24/0x34 [ 3.459103] [<ffffffff809d0452>] handle_riscv_irq+0x2e/0x4c [ 3.459133] [<ffffffff809d923e>] call_on_irq_stack+0x32/0x40 So only flush the local TLB and let the lazy kfence page fault handling deal with the faults which could happen when a core has an old protected pte version cached in its TLB. That leads to potential inaccuracies which can be tolerated when using kfence. | ||||