| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate non-resident attribute offsets
ntfs_attr_update_meta() shifts the attribute name when converting between
non-sparse and sparse attributes. Converting to sparse also adds the
compressed_size field before the name and mapping pairs, requiring eight
additional bytes in the attribute record.
However, the validator does not check that name_offset is within safe
boundaries for these operations or that the additional space is available.
A malicious MFT record could set name_offset such that:
1. The name is positioned at the very end of a non-sparse attribute.
Converting to sparse would shift the name forward by 8 bytes,
writing beyond the attribute boundary.
2. The name overlaps with the mapping pairs, causing corruption during
conversion.
Add validation to ensure:
- For named attributes, name_offset is within valid bounds
- Name does not extend beyond the attribute or overlap with mapping pairs
- For non-sparse, non-compressed attributes, eight bytes are available
after mapping_pairs_offset for the compressed_size field
The space check also covers unnamed attributes, for which name_offset = 0
is valid and no name range needs to be checked. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: verify run length exceeding volume boundary
The mapping pairs decoder validates that the starting LCN is within the
volume but does not check if the run extends beyond the volume boundary.
A malformed NTFS image with a crafted mapping pairs array could cause
the kernel to access memory beyond the volume boundary, potentially leading
to memory corruption and privilege escalation.
Add validation to ensure lcn + length stays within nr_clusters. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in __bpf_get_stack
get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and
releases its recursion slot via put_callchain_entry() before returning,
so nothing keeps the entry reserved while __bpf_get_stack() consumes
it below.
A preemptible BPF program (e.g. a non-sleepable raw tracepoint program
on a PREEMPT kernel, which runs under migrate_disable() but not
preempt_disable()) can be scheduled out between obtaining the entry
and the copy. Another task scheduled on the same CPU then reuses the
same per-CPU buffer and overwrites trace->nr with a larger value.
copy_len is then computed from the inflated trace->nr and can exceed
the caller's buffer, causing an out-of-bounds write in the memcpy()
and in the build_id path.
The rcu_read_lock() taken here alone does not prevent this. It is
only taken on the may_fault path, and under CONFIG_PREEMPT_RCU it does
not disable preemption; it merely keeps perf's callchain buffer array
alive (freed via call_rcu()) and does nothing to stop another task
from reusing the entry.
Disable preemption around obtaining the callchain entry and copying
it into the caller's buffer, so the entry cannot be reused underneath
us and trace->nr stays bounded by max_depth. Build ID resolution may
fault and is therefore deferred until after preemption is re-enabled;
by then the instruction pointers have already been copied into buf,
so it operates only on that private copy. Note, preempt_disable() also
subsumes the buffer-lifetime guarantee the rcu_read_lock() provided,
since a preempt-disabled section is an RCU read-side critical section
for the callchain buffers' call_rcu() reclaim.
[ changed Fixes: commit ] |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject inline replies that overflow the pull-up buffer
An RPC-over-RDMA client can request a reply, such as an NFS READ
payload, without providing a Write list or a Reply chunk to carry
it. When such a reply needs more scatter/gather entries than the
device's Send Queue supports, svc_rdma_pull_up_needed() selects
pull-up and svc_rdma_pull_up_reply_msg() linearizes the whole
reply into sctxt->sc_xprt_buf. That buffer is only sc_max_req_size
bytes, while the reply on this path is bounded only by the client's
request, so svc_rdma_xb_linearize() copies past the end of the
buffer and corrupts adjacent slab memory. The oversized length is
then stored in sc_sges[0].length and posted, so the device also
reads beyond the mapped region.
The SGE-exhaustion branch is the only pull-up path that can exceed
the buffer: the threshold branch pulls up only replies smaller
than RPCRDMA_PULLUP_THRESH, and replies that fit the device's SGE
budget are sent directly without linearization. Make
svc_rdma_pull_up_needed() report -E2BIG when the reply it would
pull up cannot fit sc_max_req_size, and fail the request with
ERR_CHUNK as RFC 8166 Section 4.5.3 directs rather than dropping
the connection.
The helper no longer answers a simple yes/no question: it now
reports pull-up, no pull-up, or -E2BIG for a reply too large to
linearize. Rename svc_rdma_pull_up_needed() to
svc_rdma_check_pull_up() so its name no longer implies a boolean
predicate. |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Fix PMU event info array size overflow
SBI PMU EVENT_GET_INFO stores guest-controlled num_events * sizeof(*einfo)
in a 32-bit integer. On RV64, num_events = 0x10000001 makes 0x100000010
truncate to 16. KVM then allocates one entry but loops over the original
num_events, causing out-of-bounds reads and writes. A nested guest
triggered:
BUG: KASAN: slab-out-of-bounds in kvm_riscv_vcpu_pmu_event_info+0xa4/0x142
Read of size 4 at addr ff600000074d46b0 by task init/1
Call Trace:
[<ffffffff8006471c>] kvm_riscv_vcpu_pmu_event_info+0xa4/0x142
[<ffffffff800690c0>] kvm_sbi_ext_pmu_handler+0xca/0x268
[<ffffffff8006779e>] kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6
[<ffffffff8006008c>] kvm_riscv_vcpu_exit+0x48c/0x540
[<ffffffff8005ea0a>] kvm_arch_vcpu_ioctl_run+0x37e/0xc80
Allocated by task 1:
__kmalloc_noprof+0x19e/0x4b0
kvm_riscv_vcpu_pmu_event_info+0x72/0x142
kvm_sbi_ext_pmu_handler+0xca/0x268
kvm_riscv_vcpu_sbi_ecall+0xec/0x1e6
kvm_riscv_vcpu_exit+0x48c/0x540
kvm_arch_vcpu_ioctl_run+0x37e/0xc80
The buggy address is located 0 bytes to the right of
allocated 16-byte region [ff600000074d46a0, ff600000074d46b0)
Store the shared-memory size in size_t and reject multiplication overflow.
Allocate the guest-driven array with GFP_KERNEL_ACCOUNT so it is charged
to kmemcg, and use __GFP_NOWARN to suppress allocation failure warnings.
Use kvcalloc() to allow vmalloc fallback and an unsigned long loop index
to match num_events. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: panasonic-laptop: Fix sentinel write past pcc->sinf[]
acpi_pcc_retrieve_biosdata() rejects SINF packages only when
pcc->num_sifr is strictly less than hkey->package.count, then
unconditionally writes a trailing sentinel at
pcc->sinf[hkey->package.count]. But pcc->sinf[] is allocated with
exactly pcc->num_sifr elements (valid indices 0..num_sifr-1), so that
write needs num_sifr strictly greater than package.count to stay in
bounds -- num_sifr == package.count passes the existing check but
still overflows by one element.
This is exactly the case probe()'s existing num_sifr++ workaround
("Some DSDT-s have an off-by-one bug where the SINF package count is
one higher than the SQTY reported value") is written to accommodate:
when a DSDT's SINF package count equals SQTY+1, the workaround makes
num_sifr equal to package.count, which is precisely the boundary that
overflows here. Found via UBSan (array-index-out-of-bounds) on
hardware where HKEY.SQTY returns 37 and HKEY.SINF()'s package has 38
elements: num_sifr becomes 38 after the += 1 workaround, the loop
correctly fills indices 0..37, and the sentinel write then targets
index 38, one past the end -- a silent 4-byte heap overflow on kernels
without CONFIG_UBSAN.
Tightening the rejection check to num_sifr <= package.count would
avoid the overflow but breaks probe() entirely on exactly this
hardware, since num_sifr == package.count is the case the off-by-one
workaround exists to support. Nothing else in the driver reads this
sentinel value back, so simply skip the write when there is no room
for it instead. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Make cpu_buffer::free_page a buffer_data_read_page
Discarding a cached reader page after a concurrent ring buffer resize
uses the new global subbuf_order for the free_pages() call. This
mismatched order may crashes the kernel or leaks memory because the cached
page was allocated under the old size.
Save the actual free_page order alongside the page address to ensure we
always refer to the correct value and do not rely on the potentially
stalled cpu_buffer->subbuf_order value. The simplest is to make
free_page a buffer_data_read_page which already covers exactly what we
need: a page address and a page order. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:msghandler: Cancel work cleanly on an error
If an error occurs during startup of an IPMI interface, it may have
scheduled work to run. The work needs to be canceled before the
interface can be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: bound the peer rkey counts in SMC-Rv2 LLC messages
On a link whose device has max_recv_sge == 1 there is no shared v2 receive
buffer, and smc_llc_save_add_link_rkeys() takes the v2 extension from 44
bytes past the start of the queue entry's inline message:
ext = (struct smc_llc_msg_add_link_v2_ext *)(llc_msg + SMC_WR_TX_SIZE);
The entry is a 72-byte allocation and the extension starts at offset 68, so
ext->num_rkeys at offset 94 is already past it. This happens on every
SMC-Rv2 link addition, whatever the peer sends:
[ 2.490065] BUG: KASAN: slab-out-of-bounds in smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.490431] Read of size 2 at addr ffff8880056406de by task smctest/106
[ 2.490709]
[ 2.490792] CPU: 0 UID: 0 PID: 106 Comm: smctest Not tainted 7.2.0-rc5-p1-g77a5d9d9c99f #32 PREEMPT(lazy)
[ 2.490795] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 2.490798] Call Trace:
[ 2.490803] <TASK>
[ 2.490805] dump_stack_lvl+0x53/0x70
[ 2.490810] print_report+0xd0/0x630
[ 2.490828] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 2.490832] ? smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.490834] kasan_report+0xce/0x100
[ 2.490836] ? smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.490837] smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.490839] ? smcr_buf_map_lgr+0x1bf/0x2b0
[ 2.490844] smc_llc_cli_add_link+0xca7/0x1e80
[ 2.490848] ? smc_llc_wait+0x355/0x810
[ 2.490850] ? __pfx_smc_llc_wait+0x10/0x10
[ 2.490851] ? __pfx_smc_llc_cli_add_link+0x10/0x10
[ 2.490853] ? __pfx_autoremove_wake_function+0x10/0x10
[ 2.490863] __smc_connect+0x3f5c/0x4980
[ 2.490873] ? __pfx_kernel_connect+0x10/0x10
[ 2.490888] ? __pfx___smc_connect+0x10/0x10
[ 2.490891] ? release_sock+0x148/0x1d0
[ 2.490894] smc_connect+0x42c/0x580
[ 2.490896] __sys_connect+0xfc/0x130
[ 2.490898] ? __pfx___sys_connect+0x10/0x10
[ 2.490900] ? handle_mm_fault+0x1a1/0x430
[ 2.490908] __x64_sys_connect+0x6d/0xb0
[ 2.490909] ? fpregs_assert_state_consistent+0x56/0xe0
[ 2.490917] do_syscall_64+0xf9/0x540
[ 2.490921] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2.490924] RIP: 0033:0x421bb4
[ 2.490927] Code: ff f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d ad 34 09 00 00 74 13 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 10 89 55
[ 2.490929] RSP: 002b:00007ffd473b01a8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a
[ 2.490935] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000421bb4
[ 2.490936] RDX: 0000000000000010 RSI: 00007ffd473b01d0 RDI: 0000000000000003
[ 2.490937] RBP: 0000000000003930 R08: 0000000000000004 R09: 0000000000000000
[ 2.490938] R10: 00007ffd473b0f98 R11: 0000000000000202 R12: 0000000000000006
[ 2.490939] R13: 00007ffd473b0f87 R14: 0000000000000003 R15: 00007ffd473b0f90
[ 2.490940] </TASK>
[ 2.490941]
[ 2.499545] Allocated by task 44:
[ 2.499693] kasan_save_stack+0x33/0x60
[ 2.499860] kasan_save_track+0x14/0x30
[ 2.500026] __kasan_kmalloc+0x8f/0xa0
[ 2.500190] __kmalloc_cache_noprof+0x158/0x370
[ 2.500393] smc_llc_enqueue+0x72/0x560
[ 2.500559] smc_wr_rx_tasklet_fn+0x474/0xa80
[ 2.500747] tasklet_action_common+0x20f/0x8a0
[ 2.500945] handle_softirqs+0x18e/0x590
[ 2.501115] do_softirq+0x3b/0x60
[ 2.501266] __local_bh_enable_ip+0x61/0x70
[ 2.501446] __alloc_skb+0x732/0x890
[ 2.501604] rxe_init_packet+0x16b/0x4f0
[ 2.501783] prepare_ack_packet+0xb8/0x830
[ 2.501962] rxe_receiver+0x495/0x96e0
[ 2.502125] do_work+0x144/0x470
[ 2.502269] process_one_work+0x633/0x1030
[ 2.502450] worker_thread+0x45b/0xd10
[ 2.50261
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: rtl8192du: check QoS TID before indexing tids
rtl92du_tx_fill_desc() uses ieee80211_get_tid() to read the QoS TID
from the 802.11 header and then uses it as an index into
sta_entry->tids[]. ieee80211_get_tid() returns the low 4-bit QoS TID
value, so the result can be in the range 0..15.
rtlwifi only allocates MAX_TID_COUNT entries for sta_entry->tids[], and
MAX_TID_COUNT is 9. A QoS TID greater than 8 therefore indexes past the
aggregation state array. Keep the default RTL_AGG_STOP state for
out-of-range TIDs, matching rtl92cu_tx_fill_desc().
This issue was detected by our static analysis tool and confirmed by
manual audit. UBSAN validation for the same bug pattern reports an
array-index-out-of-bounds access with index 10 for type
'rtl_tid_data [9]'. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: bound the device EEPROM address before the EFUSE copy
mt7915_mcu_get_eeprom() copies a fixed EFUSE block into the driver's
dev->mt76.eeprom.data buffer at the offset reported by the MCU response
(res->addr, a device-controlled __le32) without checking it against the
buffer size. A malicious or malfunctioning device can report an arbitrary
address and drive a 16-byte out-of-bounds write past eeprom.data.
Reject a response whose address would place the copy outside eeprom.data
before deriving the destination pointer. Devices that echo the requested
in-bounds offset are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: cancel mlo_pm_work on stop
mt7925 queues mlo_pm_work with a 5 second delay during multi-link
power-save setup and never cancels it on the stop path. If the device is
torn down inside that window, the work outlives the teardown and its timer
fires afterwards, trying to queue onto the workqueue that is already gone:
workqueue: cannot queue mt7925_mlo_pm_work [mt7925_common] on wq phy0
WARNING: kernel/workqueue.c:2283 at __queue_work+0x59/0xa0, CPU#1: swapper/1/0
call_timer_fn+0x2a/0x140
__run_timers+0x203/0x330
run_timer_softirq+0x86/0xf0
mt7921 already has its own stop callback, so add one for mt7925 that
cancels the work before calling mt792x_stop(). mt7925_ops backs both the
PCIe and USB drivers, so this covers both. |
| Chamilo LMS before 1.11.42 and 3.0.0 contains a stored cross-site scripting vulnerability that allows unauthenticated attackers to inject malicious script payloads into survey answers by computing deterministic invitation codes and bypassing authorization checks in the survey submission endpoint. Attackers can submit crafted answers containing unescaped HTML rendered in reporting views to execute arbitrary scripts in the browser sessions of teachers or administrators, enabling persistent backdoor account creation by exploiting the victim's authenticated session. |
| Concrete CMS RSS Displayer block below version 9.5.3 rendered remote feed item titles without HTML escaping, resulting in stored cross-site scripting. An attacker able to control a title in a syndicated feed could execute script in the site origin for any visitor to the affected page, including administrators, without holding an account on that site. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 6.0 with vector CVSS:4.0/AV:N/AC:H/AT:P/PR:N/UI:P/VC:H/VI:L/VA:N/SC:N/SI:N/SA:N. Thanks riodrwn for reporting. |
| Contributor Cross Site Scripting (XSS) in Visual Composer Website Builder <= 45.16.1 versions. |
| Contributor Cross Site Scripting (XSS) in Bold Page Builder <= 5.9.9 versions. |
| Contributor Cross Site Scripting (XSS) in Simple Payment <= 2.5.4 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject connection when transport allocation fails
handle_connect_req() returns without action when
svc_rdma_create_xprt() fails to allocate the new transport.
The CM core returns 0 for CONNECT_REQUEST events, so it does
not destroy the new rdma_cm_id. Each allocation failure under
memory pressure leaks one rdma_cm_id, and a remote peer driving
connection attempts can amplify this.
Reject the connection by returning a non-zero status from the
CM event handler, which tells the CM core to destroy the
orphaned cm_id. |
| The CODE MONKEYS PROPOSALS WordPress plugin through 1.0.1 does not validate a user-supplied file path before deleting a file, and does not check the capability of the user making the request, allowing any authenticated user, such as a subscriber, to delete arbitrary files on the server, which can lead to a site takeover. |
| The Export & Import WPBakery Page Builder WordPress plugin through 1.0.2 does not perform any CSRF check on its template-import feature and does not sanitise the imported data before storing it and echoing it back, allowing attackers to make a logged-in administrator import a crafted template via a forged request that results in Stored Cross-Site Scripting executed in the administrator's session. |
