| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ecm: Refactor bind path to use __free()
After an bind/unbind cycle, the ecm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Fix bootlog initialization ordering
As soon as we queue MHI buffers to receive the bootlog from the device,
we could be receiving data. Therefore all the resources needed to
process that data need to be setup prior to queuing the buffers.
We currently initialize some of the resources after queuing the buffers
which creates a race between the probe() and any data that comes back
from the device. If the uninitialized resources are accessed, we could
see page faults.
Fix the init ordering to close the race. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: parse_dfs_referrals: prevent oob on malformed input
Malicious SMB server can send invalid reply to FSCTL_DFS_GET_REFERRALS
- reply smaller than sizeof(struct get_dfs_referral_rsp)
- reply with number of referrals smaller than NumberOfReferrals in the
header
Processing of such replies will cause oob.
Return -EINVAL error on such replies to prevent oob-s. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST
At the end of btrfs_load_block_group_zone_info() the first thing we do
is to ensure that if the mapping type is not a SINGLE one and there is
no RAID stripe tree, then we return early with an error.
Doing that, though, prevents the code from running the last calls from
this function which are about freeing memory allocated during its
run. Hence, in this case, instead of returning early, we set the ret
value and fall through the rest of the cleanup code. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: wait for pending async decryptions if tls_strp_msg_hold fails
Async decryption calls tls_strp_msg_hold to create a clone of the
input skb to hold references to the memory it uses. If we fail to
allocate that clone, proceeding with async decryption can lead to
various issues (UAF on the skb, writing into userspace memory after
the recv() call has returned).
In this case, wait for all pending decryption requests. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: cleanup remaining SKBs in PTP flows
When the driver requests Tx timestamp value, one of the first steps is
to clone SKB using skb_get. It increases the reference counter for that
SKB to prevent unexpected freeing by another component.
However, there may be a case where the index is requested, SKB is
assigned and never consumed by PTP flows - for example due to reset during
running PTP apps.
Add a check in release timestamping function to verify if the SKB
assigned to Tx timestamp latch was freed, and release remaining SKBs. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Treat remaining == 0 as error in find_and_map_user_pages()
Currently, if find_and_map_user_pages() takes a DMA xfer request from the
user with a length field set to 0, or in a rare case, the host receives
QAIC_TRANS_DMA_XFER_CONT from the device where resources->xferred_dma_size
is equal to the requested transaction size, the function will return 0
before allocating an sgt or setting the fields of the dma_xfer struct.
In that case, encode_addr_size_pairs() will try to access the sgt which
will lead to a general protection fault.
Return an EINVAL in case the user provides a zero-sized ALP, or the device
requests continuation after all of the bytes have been transferred. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: zynq-ipi: fix error handling while device_register() fails
If device_register() fails, it has two issues:
1. The name allocated by dev_set_name() is leaked.
2. The parent of device is not NULL, device_unregister() is called
in zynqmp_ipi_free_mboxes(), it will lead a kernel crash because
of removing not added device.
Call put_device() to give up the reference, so the name is freed in
kobject_cleanup(). Add device registered check in zynqmp_ipi_free_mboxes()
to avoid null-ptr-deref. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject negative offsets for ALU ops
When verifying BPF programs, the check_alu_op() function validates
instructions with ALU operations. The 'offset' field in these
instructions is a signed 16-bit integer.
The existing check 'insn->off > 1' was intended to ensure the offset is
either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is
signed, this check incorrectly accepts all negative values (e.g., -1).
This commit tightens the validation by changing the condition to
'(insn->off != 0 && insn->off != 1)'. This ensures that any value
other than the explicitly permitted 0 and 1 is rejected, hardening the
verifier against malformed BPF programs. |
| In the Linux kernel, the following vulnerability has been resolved:
smc: Use __sk_dst_get() and dst_dev_rcu() in smc_clc_prfx_match().
smc_clc_prfx_match() is called from smc_listen_work() and
not under RCU nor RTNL.
Using sk_dst_get(sk)->dev could trigger UAF.
Let's use __sk_dst_get() and dst_dev_rcu().
Note that the returned value of smc_clc_prfx_match() is not
used in the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
syzbot reported a BUG_ON in ext4_es_cache_extent() when opening a verity
file on a corrupted ext4 filesystem mounted without a journal.
The issue is that the filesystem has an inode with both the INLINE_DATA
and EXTENTS flags set:
EXT4-fs error (device loop0): ext4_cache_extents:545: inode #15:
comm syz.0.17: corrupted extent tree: lblk 0 < prev 66
Investigation revealed that the inode has both flags set:
DEBUG: inode 15 - flag=1, i_inline_off=164, has_inline=1, extents_flag=1
This is an invalid combination since an inode should have either:
- INLINE_DATA: data stored directly in the inode
- EXTENTS: data stored in extent-mapped blocks
Having both flags causes ext4_has_inline_data() to return true, skipping
extent tree validation in __ext4_iget(). The unvalidated out-of-order
extents then trigger a BUG_ON in ext4_es_cache_extent() due to integer
underflow when calculating hole sizes.
Fix this by detecting this invalid flag combination early in ext4_iget()
and rejecting the corrupted inode. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: fix possible memory leak in mtk_probe()
If mtk_wed_add_hw() has been called, mtk_wed_exit() needs be called
in error path or removing module to free the memory allocated in
mtk_wed_add_hw(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: nxp: imx8-isi: m2m: Fix streaming cleanup on release
If streamon/streamoff calls are imbalanced, such as when exiting an
application with Ctrl+C when streaming, the m2m usage_count will never
reach zero and the ISI channel won't be freed. Besides from that, if the
input line width is more than 2K, it will trigger a WARN_ON():
[ 59.222120] ------------[ cut here ]------------
[ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654
[ 59.238569] Modules linked in: ap1302
[ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty #258 PREEMPT
[ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT)
[ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120
[ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120
[ 59.275047] sp : ffff8000848c3b40
[ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00
[ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001
[ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780
[ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000
[ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c
[ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30
[ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420
[ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000
[ 59.349590] Call trace:
[ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P)
[ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c
[ 59.361072] v4l_streamon+0x24/0x30
[ 59.364556] __video_do_ioctl+0x40c/0x4a0
[ 59.368560] video_usercopy+0x2bc/0x690
[ 59.372382] video_ioctl2+0x18/0x24
[ 59.375857] v4l2_ioctl+0x40/0x60
[ 59.379168] __arm64_sys_ioctl+0xac/0x104
[ 59.383172] invoke_syscall+0x48/0x104
[ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0
[ 59.391613] do_el0_svc+0x1c/0x28
[ 59.394915] el0_svc+0x34/0xf4
[ 59.397966] el0t_64_sync_handler+0xa0/0xe4
[ 59.402143] el0t_64_sync+0x198/0x19c
[ 59.405801] ---[ end trace 0000000000000000 ]---
Address this issue by moving the streaming preparation and cleanup to
the vb2 .prepare_streaming() and .unprepare_streaming() operations. This
also simplifies the driver by allowing direct usage of the
v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/deadline: Stop dl_server before CPU goes offline
IBM CI tool reported kernel warning[1] when running a CPU removal
operation through drmgr[2]. i.e "drmgr -c cpu -r -q 1"
WARNING: CPU: 0 PID: 0 at kernel/sched/cpudeadline.c:219 cpudl_set+0x58/0x170
NIP [c0000000002b6ed8] cpudl_set+0x58/0x170
LR [c0000000002b7cb8] dl_server_timer+0x168/0x2a0
Call Trace:
[c000000002c2f8c0] init_stack+0x78c0/0x8000 (unreliable)
[c0000000002b7cb8] dl_server_timer+0x168/0x2a0
[c00000000034df84] __hrtimer_run_queues+0x1a4/0x390
[c00000000034f624] hrtimer_interrupt+0x124/0x300
[c00000000002a230] timer_interrupt+0x140/0x320
Git bisects to: commit 4ae8d9aa9f9d ("sched/deadline: Fix dl_server getting stuck")
This happens since:
- dl_server hrtimer gets enqueued close to cpu offline, when
kthread_park enqueues a fair task.
- CPU goes offline and drmgr removes it from cpu_present_mask.
- hrtimer fires and warning is hit.
Fix it by stopping the dl_server before CPU is marked dead.
[1]: https://lore.kernel.org/all/8218e149-7718-4432-9312-f97297c352b9@linux.ibm.com/
[2]: https://github.com/ibm-power-utilities/powerpc-utils/tree/next/src/drmgr
[sshegde: wrote the changelog and tested it] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
DAMON's virtual address space operation set implementation (vaddr) calls
pte_offset_map_lock() inside the page table walk callback function. This
is for reading and writing page table accessed bits. If
pte_offset_map_lock() fails, it retries by returning the page table walk
callback function with ACTION_AGAIN.
pte_offset_map_lock() can continuously fail if the target is a pmd
migration entry, though. Hence it could cause an infinite page table walk
if the migration cannot be done until the page table walk is finished.
This indeed caused a soft lockup when CPU hotplugging and DAMON were
running in parallel.
Avoid the infinite loop by simply not retrying the page table walk. DAMON
is promising only a best-effort accuracy, so missing access to such pages
is no problem. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait()
There is a bug observed when rtw89_core_tx_kick_off_and_wait() tries to
access already freed skb_data:
BUG: KFENCE: use-after-free write in rtw89_core_tx_kick_off_and_wait drivers/net/wireless/realtek/rtw89/core.c:1110
CPU: 6 UID: 0 PID: 41377 Comm: kworker/u64:24 Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS edk2-20250523-14.fc42 05/23/2025
Workqueue: events_unbound cfg80211_wiphy_work [cfg80211]
Use-after-free write at 0x0000000020309d9d (in kfence-#251):
rtw89_core_tx_kick_off_and_wait drivers/net/wireless/realtek/rtw89/core.c:1110
rtw89_core_scan_complete drivers/net/wireless/realtek/rtw89/core.c:5338
rtw89_hw_scan_complete_cb drivers/net/wireless/realtek/rtw89/fw.c:7979
rtw89_chanctx_proceed_cb drivers/net/wireless/realtek/rtw89/chan.c:3165
rtw89_chanctx_proceed drivers/net/wireless/realtek/rtw89/chan.h:141
rtw89_hw_scan_complete drivers/net/wireless/realtek/rtw89/fw.c:8012
rtw89_mac_c2h_scanofld_rsp drivers/net/wireless/realtek/rtw89/mac.c:5059
rtw89_fw_c2h_work drivers/net/wireless/realtek/rtw89/fw.c:6758
process_one_work kernel/workqueue.c:3241
worker_thread kernel/workqueue.c:3400
kthread kernel/kthread.c:463
ret_from_fork arch/x86/kernel/process.c:154
ret_from_fork_asm arch/x86/entry/entry_64.S:258
kfence-#251: 0x0000000056e2393d-0x000000009943cb62, size=232, cache=skbuff_head_cache
allocated by task 41377 on cpu 6 at 77869.159548s (0.009551s ago):
__alloc_skb net/core/skbuff.c:659
__netdev_alloc_skb net/core/skbuff.c:734
ieee80211_nullfunc_get net/mac80211/tx.c:5844
rtw89_core_send_nullfunc drivers/net/wireless/realtek/rtw89/core.c:3431
rtw89_core_scan_complete drivers/net/wireless/realtek/rtw89/core.c:5338
rtw89_hw_scan_complete_cb drivers/net/wireless/realtek/rtw89/fw.c:7979
rtw89_chanctx_proceed_cb drivers/net/wireless/realtek/rtw89/chan.c:3165
rtw89_chanctx_proceed drivers/net/wireless/realtek/rtw89/chan.c:3194
rtw89_hw_scan_complete drivers/net/wireless/realtek/rtw89/fw.c:8012
rtw89_mac_c2h_scanofld_rsp drivers/net/wireless/realtek/rtw89/mac.c:5059
rtw89_fw_c2h_work drivers/net/wireless/realtek/rtw89/fw.c:6758
process_one_work kernel/workqueue.c:3241
worker_thread kernel/workqueue.c:3400
kthread kernel/kthread.c:463
ret_from_fork arch/x86/kernel/process.c:154
ret_from_fork_asm arch/x86/entry/entry_64.S:258
freed by task 1045 on cpu 9 at 77869.168393s (0.001557s ago):
ieee80211_tx_status_skb net/mac80211/status.c:1117
rtw89_pci_release_txwd_skb drivers/net/wireless/realtek/rtw89/pci.c:564
rtw89_pci_release_tx_skbs.isra.0 drivers/net/wireless/realtek/rtw89/pci.c:651
rtw89_pci_release_tx drivers/net/wireless/realtek/rtw89/pci.c:676
rtw89_pci_napi_poll drivers/net/wireless/realtek/rtw89/pci.c:4238
__napi_poll net/core/dev.c:7495
net_rx_action net/core/dev.c:7557 net/core/dev.c:7684
handle_softirqs kernel/softirq.c:580
do_softirq.part.0 kernel/softirq.c:480
__local_bh_enable_ip kernel/softirq.c:407
rtw89_pci_interrupt_threadfn drivers/net/wireless/realtek/rtw89/pci.c:927
irq_thread_fn kernel/irq/manage.c:1133
irq_thread kernel/irq/manage.c:1257
kthread kernel/kthread.c:463
ret_from_fork arch/x86/kernel/process.c:154
ret_from_fork_asm arch/x86/entry/entry_64.S:258
It is a consequence of a race between the waiting and the signaling side
of the completion:
Waiting thread Completing thread
rtw89_core_tx_kick_off_and_wait()
rcu_assign_pointer(skb_data->wait, wait)
/* start waiting */
wait_for_completion_timeout()
rtw89_pci_tx_status()
rtw89_core_tx_wait_complete()
rcu_read_lock()
/* signals completion and
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: client: fix memory leak in smb3_fs_context_parse_param
The user calls fsconfig twice, but when the program exits, free() only
frees ctx->source for the second fsconfig, not the first.
Regarding fc->source, there is no code in the fs context related to its
memory reclamation.
To fix this memory leak, release the source memory corresponding to ctx
or fc before each parsing.
syzbot reported:
BUG: memory leak
unreferenced object 0xffff888128afa360 (size 96):
backtrace (crc 79c9c7ba):
kstrdup+0x3c/0x80 mm/util.c:84
smb3_fs_context_parse_param+0x229b/0x36c0 fs/smb/client/fs_context.c:1444
BUG: memory leak
unreferenced object 0xffff888112c7d900 (size 96):
backtrace (crc 79c9c7ba):
smb3_fs_context_fullpath+0x70/0x1b0 fs/smb/client/fs_context.c:629
smb3_fs_context_parse_param+0x2266/0x36c0 fs/smb/client/fs_context.c:1438 |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: Fix use-after-free in tipc_mon_reinit_self().
syzbot reported use-after-free of tipc_net(net)->monitors[]
in tipc_mon_reinit_self(). [0]
The array is protected by RTNL, but tipc_mon_reinit_self()
iterates over it without RTNL.
tipc_mon_reinit_self() is called from tipc_net_finalize(),
which is always under RTNL except for tipc_net_finalize_work().
Let's hold RTNL in tipc_net_finalize_work().
[0]:
BUG: KASAN: slab-use-after-free in __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0xa7/0xf0 kernel/locking/spinlock.c:162
Read of size 1 at addr ffff88805eae1030 by task kworker/0:7/5989
CPU: 0 UID: 0 PID: 5989 Comm: kworker/0:7 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
Workqueue: events tipc_net_finalize_work
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
__kasan_check_byte+0x2a/0x40 mm/kasan/common.c:568
kasan_check_byte include/linux/kasan.h:399 [inline]
lock_acquire+0x8d/0x360 kernel/locking/lockdep.c:5842
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xa7/0xf0 kernel/locking/spinlock.c:162
rtlock_slowlock kernel/locking/rtmutex.c:1894 [inline]
rwbase_rtmutex_lock_state kernel/locking/spinlock_rt.c:160 [inline]
rwbase_write_lock+0xd3/0x7e0 kernel/locking/rwbase_rt.c:244
rt_write_lock+0x76/0x110 kernel/locking/spinlock_rt.c:243
write_lock_bh include/linux/rwlock_rt.h:99 [inline]
tipc_mon_reinit_self+0x79/0x430 net/tipc/monitor.c:718
tipc_net_finalize+0x115/0x190 net/tipc/net.c:140
process_one_work kernel/workqueue.c:3236 [inline]
process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3319
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3400
kthread+0x70e/0x8a0 kernel/kthread.c:463
ret_from_fork+0x439/0x7d0 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 6089:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:388 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:405
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x1a8/0x320 mm/slub.c:4407
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
tipc_mon_create+0xc3/0x4d0 net/tipc/monitor.c:657
tipc_enable_bearer net/tipc/bearer.c:357 [inline]
__tipc_nl_bearer_enable+0xe16/0x13f0 net/tipc/bearer.c:1047
__tipc_nl_compat_doit net/tipc/netlink_compat.c:371 [inline]
tipc_nl_compat_doit+0x3bc/0x5f0 net/tipc/netlink_compat.c:393
tipc_nl_compat_handle net/tipc/netlink_compat.c:-1 [inline]
tipc_nl_compat_recv+0x83c/0xbe0 net/tipc/netlink_compat.c:1321
genl_family_rcv_msg_doit+0x215/0x300 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x60e/0x790 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2552
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0x846/0xa10 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg+0x21c/0x270 net/socket.c:729
____sys_sendmsg+0x508/0x820 net/socket.c:2614
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668
__sys_sendmsg net/socket.c:2700 [inline]
__do_sys_sendmsg net/socket.c:2705 [inline]
__se_sys_sendmsg net/socket.c:2703 [inline]
__x64_sys_sendmsg+0x1a1/0x260 net/socket.c:2703
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: cancel mesh send timer when hdev removed
mesh_send_done timer is not canceled when hdev is removed, which causes
crash if the timer triggers after hdev is gone.
Cancel the timer when MGMT removes the hdev, like other MGMT timers.
Should fix the BUG: sporadically seen by BlueZ test bot
(in "Mesh - Send cancel - 1" test).
Log:
------
BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0
...
Freed by task 36:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x43/0x70
kfree+0x103/0x500
device_release+0x9a/0x210
kobject_put+0x100/0x1e0
vhci_release+0x18b/0x240
------ |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix improper check of dentry.stream.valid_size
We found an infinite loop bug in the exFAT file system that can lead to a
Denial-of-Service (DoS) condition. When a dentry in an exFAT filesystem is
malformed, the following system calls — SYS_openat, SYS_ftruncate, and
SYS_pwrite64 — can cause the kernel to hang.
Root cause analysis shows that the size validation code in exfat_find()
does not check whether dentry.stream.valid_size is negative. As a result,
the system calls mentioned above can succeed and eventually trigger the DoS
issue.
This patch adds a check for negative dentry.stream.valid_size to prevent
this vulnerability. |
