| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix memory leak of flow steer list on rmmod
The flow steering list maintains entries that are added and removed as
ethtool creates and deletes flow steering rules. Module removal with active
entries causes memory leak as the list is not properly cleaned up.
Prevent this by iterating through the remaining entries in the list and
freeing the associated memory during module removal. Add a spinlock
(flow_steer_list_lock) to protect the list access from multiple threads. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix memory leak in idpf_vport_rel()
Free vport->rx_ptype_lkup in idpf_vport_rel() to avoid leaking memory
during a reset. Reported by kmemleak:
unreferenced object 0xff450acac838a000 (size 4096):
comm "kworker/u258:5", pid 7732, jiffies 4296830044
hex dump (first 32 bytes):
00 00 00 00 00 10 00 00 00 10 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 ................
backtrace (crc 3da81902):
__kmalloc_cache_noprof+0x469/0x7a0
idpf_send_get_rx_ptype_msg+0x90/0x570 [idpf]
idpf_init_task+0x1ec/0x8d0 [idpf]
process_one_work+0x226/0x6d0
worker_thread+0x19e/0x340
kthread+0x10f/0x250
ret_from_fork+0x251/0x2b0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix memory leak in idpf_vc_core_deinit()
Make sure to free hw->lan_regs. Reported by kmemleak during reset:
unreferenced object 0xff1b913d02a936c0 (size 96):
comm "kworker/u258:14", pid 2174, jiffies 4294958305
hex dump (first 32 bytes):
00 00 00 c0 a8 ba 2d ff 00 00 00 00 00 00 00 00 ......-.........
00 00 40 08 00 00 00 00 00 00 25 b3 a8 ba 2d ff ..@.......%...-.
backtrace (crc 36063c4f):
__kmalloc_noprof+0x48f/0x890
idpf_vc_core_init+0x6ce/0x9b0 [idpf]
idpf_vc_event_task+0x1fb/0x350 [idpf]
process_one_work+0x226/0x6d0
worker_thread+0x19e/0x340
kthread+0x10f/0x250
ret_from_fork+0x251/0x2b0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: fix memory leak in update_eth_regs_async()
When asynchronously writing to the device registers and if usb_submit_urb()
fail, the code fail to release allocated to this point resources. |
| In the Linux kernel, the following vulnerability has been resolved:
net: 3com: 3c59x: fix possible null dereference in vortex_probe1()
pdev can be null and free_ring: can be called in 1297 with a null
pdev. |
| In the Linux kernel, the following vulnerability has been resolved:
net: marvell: prestera: fix NULL dereference on devlink_alloc() failure
devlink_alloc() may return NULL on allocation failure, but
prestera_devlink_alloc() unconditionally calls devlink_priv() on
the returned pointer.
This leads to a NULL pointer dereference if devlink allocation fails.
Add a check for a NULL devlink pointer and return NULL early to avoid
the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: release path before initializing extent tree in btrfs_read_locked_inode()
In btrfs_read_locked_inode() we are calling btrfs_init_file_extent_tree()
while holding a path with a read locked leaf from a subvolume tree, and
btrfs_init_file_extent_tree() may do a GFP_KERNEL allocation, which can
trigger reclaim.
This can create a circular lock dependency which lockdep warns about with
the following splat:
[6.1433] ======================================================
[6.1574] WARNING: possible circular locking dependency detected
[6.1583] 6.18.0+ #4 Tainted: G U
[6.1591] ------------------------------------------------------
[6.1599] kswapd0/117 is trying to acquire lock:
[6.1606] ffff8d9b6333c5b8 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1625]
but task is already holding lock:
[6.1633] ffffffffa4ab8ce0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x195/0xc60
[6.1646]
which lock already depends on the new lock.
[6.1657]
the existing dependency chain (in reverse order) is:
[6.1667]
-> #2 (fs_reclaim){+.+.}-{0:0}:
[6.1677] fs_reclaim_acquire+0x9d/0xd0
[6.1685] __kmalloc_cache_noprof+0x59/0x750
[6.1694] btrfs_init_file_extent_tree+0x90/0x100
[6.1702] btrfs_read_locked_inode+0xc3/0x6b0
[6.1710] btrfs_iget+0xbb/0xf0
[6.1716] btrfs_lookup_dentry+0x3c5/0x8e0
[6.1724] btrfs_lookup+0x12/0x30
[6.1731] lookup_open.isra.0+0x1aa/0x6a0
[6.1739] path_openat+0x5f7/0xc60
[6.1746] do_filp_open+0xd6/0x180
[6.1753] do_sys_openat2+0x8b/0xe0
[6.1760] __x64_sys_openat+0x54/0xa0
[6.1768] do_syscall_64+0x97/0x3e0
[6.1776] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[6.1784]
-> #1 (btrfs-tree-00){++++}-{3:3}:
[6.1794] lock_release+0x127/0x2a0
[6.1801] up_read+0x1b/0x30
[6.1808] btrfs_search_slot+0x8e0/0xff0
[6.1817] btrfs_lookup_inode+0x52/0xd0
[6.1825] __btrfs_update_delayed_inode+0x73/0x520
[6.1833] btrfs_commit_inode_delayed_inode+0x11a/0x120
[6.1842] btrfs_log_inode+0x608/0x1aa0
[6.1849] btrfs_log_inode_parent+0x249/0xf80
[6.1857] btrfs_log_dentry_safe+0x3e/0x60
[6.1865] btrfs_sync_file+0x431/0x690
[6.1872] do_fsync+0x39/0x80
[6.1879] __x64_sys_fsync+0x13/0x20
[6.1887] do_syscall_64+0x97/0x3e0
[6.1894] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[6.1903]
-> #0 (&delayed_node->mutex){+.+.}-{3:3}:
[6.1913] __lock_acquire+0x15e9/0x2820
[6.1920] lock_acquire+0xc9/0x2d0
[6.1927] __mutex_lock+0xcc/0x10a0
[6.1934] __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1944] btrfs_evict_inode+0x20b/0x4b0
[6.1952] evict+0x15a/0x2f0
[6.1958] prune_icache_sb+0x91/0xd0
[6.1966] super_cache_scan+0x150/0x1d0
[6.1974] do_shrink_slab+0x155/0x6f0
[6.1981] shrink_slab+0x48e/0x890
[6.1988] shrink_one+0x11a/0x1f0
[6.1995] shrink_node+0xbfd/0x1320
[6.1002] balance_pgdat+0x67f/0xc60
[6.1321] kswapd+0x1dc/0x3e0
[6.1643] kthread+0xff/0x240
[6.1965] ret_from_fork+0x223/0x280
[6.1287] ret_from_fork_asm+0x1a/0x30
[6.1616]
other info that might help us debug this:
[6.1561] Chain exists of:
&delayed_node->mutex --> btrfs-tree-00 --> fs_reclaim
[6.1503] Possible unsafe locking scenario:
[6.1110] CPU0 CPU1
[6.1411] ---- ----
[6.1707] lock(fs_reclaim);
[6.1998] lock(btrfs-tree-00);
[6.1291] lock(fs_reclaim);
[6.1581] lock(&del
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix error handling in the init_task on load
If the init_task fails during a driver load, we end up without vports and
netdevs, effectively failing the entire process. In that state a
subsequent reset will result in a crash as the service task attempts to
access uninitialized resources. Following trace is from an error in the
init_task where the CREATE_VPORT (op 501) is rejected by the FW:
[40922.763136] idpf 0000:83:00.0: Device HW Reset initiated
[40924.449797] idpf 0000:83:00.0: Transaction failed (op 501)
[40958.148190] idpf 0000:83:00.0: HW reset detected
[40958.161202] BUG: kernel NULL pointer dereference, address: 00000000000000a8
...
[40958.168094] Workqueue: idpf-0000:83:00.0-vc_event idpf_vc_event_task [idpf]
[40958.168865] RIP: 0010:idpf_vc_event_task+0x9b/0x350 [idpf]
...
[40958.177932] Call Trace:
[40958.178491] <TASK>
[40958.179040] process_one_work+0x226/0x6d0
[40958.179609] worker_thread+0x19e/0x340
[40958.180158] ? __pfx_worker_thread+0x10/0x10
[40958.180702] kthread+0x10f/0x250
[40958.181238] ? __pfx_kthread+0x10/0x10
[40958.181774] ret_from_fork+0x251/0x2b0
[40958.182307] ? __pfx_kthread+0x10/0x10
[40958.182834] ret_from_fork_asm+0x1a/0x30
[40958.183370] </TASK>
Fix the error handling in the init_task to make sure the service and
mailbox tasks are disabled if the error happens during load. These are
started in idpf_vc_core_init(), which spawns the init_task and has no way
of knowing if it failed. If the error happens on reset, following
successful driver load, the tasks can still run, as that will allow the
netdevs to attempt recovery through another reset. Stop the PTP callbacks
either way as those will be restarted by the call to idpf_vc_core_init()
during a successful reset. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: drop fraglist conntrack references
Jakub added a warning in nf_conntrack_cleanup_net_list() to make debugging
leaked skbs/conntrack references more obvious.
syzbot reports this as triggering, and I can also reproduce this via
ip_defrag.sh selftest:
conntrack cleanup blocked for 60s
WARNING: net/netfilter/nf_conntrack_core.c:2512
[..]
conntrack clenups gets stuck because there are skbs with still hold nf_conn
references via their frag_list.
net.core.skb_defer_max=0 makes the hang disappear.
Eric Dumazet points out that skb_release_head_state() doesn't follow the
fraglist.
ip_defrag.sh can only reproduce this problem since
commit 6471658dc66c ("udp: use skb_attempt_defer_free()"), but AFAICS this
problem could happen with TCP as well if pmtu discovery is off.
The relevant problem path for udp is:
1. netns emits fragmented packets
2. nf_defrag_v6_hook reassembles them (in output hook)
3. reassembled skb is tracked (skb owns nf_conn reference)
4. ip6_output refragments
5. refragmented packets also own nf_conn reference (ip6_fragment
calls ip6_copy_metadata())
6. on input path, nf_defrag_v6_hook skips defragmentation: the
fragments already have skb->nf_conn attached
7. skbs are reassembled via ipv6_frag_rcv()
8. skb_consume_udp -> skb_attempt_defer_free() -> skb ends up
in pcpu freelist, but still has nf_conn reference.
Possible solutions:
1 let defrag engine drop nf_conn entry, OR
2 export kick_defer_list_purge() and call it from the conntrack
netns exit callback, OR
3 add skb_has_frag_list() check to skb_attempt_defer_free()
2 & 3 also solve ip_defrag.sh hang but share same drawback:
Such reassembled skbs, queued to socket, can prevent conntrack module
removal until userspace has consumed the packet. While both tcp and udp
stack do call nf_reset_ct() before placing skb on socket queue, that
function doesn't iterate frag_list skbs.
Therefore drop nf_conn entries when they are placed in defrag queue.
Keep the nf_conn entry of the first (offset 0) skb so that reassembled
skb retains nf_conn entry for sake of TX path.
Note that fixes tag is incorrect; it points to the commit introducing the
'ip_defrag.sh reproducible problem': no need to backport this patch to
every stable kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mpsse: fix reference leak in gpio_mpsse_probe() error paths
The reference obtained by calling usb_get_dev() is not released in the
gpio_mpsse_probe() error paths. Fix that by using device managed helper
functions. Also remove the usb_put_dev() call in the disconnect function
since now it will be released automatically. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix NULL dereference on root when tracing inode eviction
When evicting an inode the first thing we do is to setup tracing for it,
which implies fetching the root's id. But in btrfs_evict_inode() the
root might be NULL, as implied in the next check that we do in
btrfs_evict_inode().
Hence, we either should set the ->root_objectid to 0 in case the root is
NULL, or we move tracing setup after checking that the root is not
NULL. Setting the rootid to 0 at least gives us the possibility to trace
this call even in the case when the root is NULL, so that's the solution
taken here. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always detect conflicting inodes when logging inode refs
After rename exchanging (either with the rename exchange operation or
regular renames in multiple non-atomic steps) two inodes and at least
one of them is a directory, we can end up with a log tree that contains
only of the inodes and after a power failure that can result in an attempt
to delete the other inode when it should not because it was not deleted
before the power failure. In some case that delete attempt fails when
the target inode is a directory that contains a subvolume inside it, since
the log replay code is not prepared to deal with directory entries that
point to root items (only inode items).
1) We have directories "dir1" (inode A) and "dir2" (inode B) under the
same parent directory;
2) We have a file (inode C) under directory "dir1" (inode A);
3) We have a subvolume inside directory "dir2" (inode B);
4) All these inodes were persisted in a past transaction and we are
currently at transaction N;
5) We rename the file (inode C), so at btrfs_log_new_name() we update
inode C's last_unlink_trans to N;
6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B),
so after the exchange "dir1" is inode B and "dir2" is inode A.
During the rename exchange we call btrfs_log_new_name() for inodes
A and B, but because they are directories, we don't update their
last_unlink_trans to N;
7) An fsync against the file (inode C) is done, and because its inode
has a last_unlink_trans with a value of N we log its parent directory
(inode A) (through btrfs_log_all_parents(), called from
btrfs_log_inode_parent()).
8) So we end up with inode B not logged, which now has the old name
of inode A. At copy_inode_items_to_log(), when logging inode A, we
did not check if we had any conflicting inode to log because inode
A has a generation lower than the current transaction (created in
a past transaction);
9) After a power failure, when replaying the log tree, since we find that
inode A has a new name that conflicts with the name of inode B in the
fs tree, we attempt to delete inode B... this is wrong since that
directory was never deleted before the power failure, and because there
is a subvolume inside that directory, attempting to delete it will fail
since replay_dir_deletes() and btrfs_unlink_inode() are not prepared
to deal with dir items that point to roots instead of inodes.
When that happens the mount fails and we get a stack trace like the
following:
[87.2314] BTRFS info (device dm-0): start tree-log replay
[87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259
[87.2332] ------------[ cut here ]------------
[87.2338] BTRFS: Transaction aborted (error -2)
[87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2368] Modules linked in: btrfs loop dm_thin_pool (...)
[87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full)
[87.2489] Tainted: [W]=WARN
[87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2538] Code: c0 89 04 24 (...)
[87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286
[87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000
[87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff
[87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840
[87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0
[87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10
[87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000
[87.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: make j1939_session_activate() fail if device is no longer registered
syzbot is still reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
even after commit 93a27b5891b8 ("can: j1939: add missing calls in
NETDEV_UNREGISTER notification handler") was added. A debug printk() patch
found that j1939_session_activate() can succeed even after
j1939_cancel_active_session() from j1939_netdev_notify(NETDEV_UNREGISTER)
has completed.
Since j1939_cancel_active_session() is processed with the session list lock
held, checking ndev->reg_state in j1939_session_activate() with the session
list lock held can reliably close the race window. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: remove spin_lock() in rust_shrink_free_page()
When forward-porting Rust Binder to 6.18, I neglected to take commit
fb56fdf8b9a2 ("mm/list_lru: split the lock to per-cgroup scope") into
account, and apparently I did not end up running the shrinker callback
when I sanity tested the driver before submission. This leads to crashes
like the following:
============================================
WARNING: possible recursive locking detected
6.18.0-mainline-maybe-dirty #1 Tainted: G IO
--------------------------------------------
kswapd0/68 is trying to acquire lock:
ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: lock_list_lru_of_memcg+0x128/0x230
but task is already holding lock:
ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: rust_helper_spin_lock+0xd/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&l->lock);
lock(&l->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by kswapd0/68:
#0: ffffffff90d2e260 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0x597/0x1160
#1: ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: rust_helper_spin_lock+0xd/0x20
#2: ffffffff90cf3680 (rcu_read_lock){....}-{1:2}, at: lock_list_lru_of_memcg+0x2d/0x230
To fix this, remove the spin_lock() call from rust_shrink_free_page(). |
| In the Linux kernel, the following vulnerability has been resolved:
counter: interrupt-cnt: Drop IRQF_NO_THREAD flag
An IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, as
CONFIG_PROVE_RAW_LOCK_NESTING warns:
=============================
[ BUG: Invalid wait context ]
6.18.0-rc1+git... #1
-----------------------------
some-user-space-process/1251 is trying to lock:
(&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter]
other info that might help us debug this:
context-{2:2}
no locks held by some-user-space-process/....
stack backtrace:
CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPT
Call trace:
show_stack (C)
dump_stack_lvl
dump_stack
__lock_acquire
lock_acquire
_raw_spin_lock_irqsave
counter_push_event [counter]
interrupt_cnt_isr [interrupt_cnt]
__handle_irq_event_percpu
handle_irq_event
handle_simple_irq
handle_irq_desc
generic_handle_domain_irq
gpio_irq_handler
handle_irq_desc
generic_handle_domain_irq
gic_handle_irq
call_on_irq_stack
do_interrupt_handler
el0_interrupt
__el0_irq_handler_common
el0t_64_irq_handler
el0t_64_irq
... and Sebastian correctly points out. Remove IRQF_NO_THREAD as an
alternative to switching to raw_spinlock_t, because the latter would limit
all potential nested locks to raw_spinlock_t only. |
| Early versions of Operator-SDK provided an insecure method to allow operator containers to run in environments that used a random UID. Operator-SDK before 0.15.2 provided a script, user_setup, which modifies the permissions of the /etc/passwd file to 664 during build time. Developers who used Operator-SDK before 0.15.2 to scaffold their operator may still be impacted by this if the insecure user_setup script is still being used to build new container images.
In affected images, the /etc/passwd file is created during build time with group-writable permissions and a group ownership of root (gid=0). An attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container. |
| The SupportCandy – Helpdesk & Customer Support Ticket System plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 3.4.4 via the 'add_reply' function due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with subscriber-level access and above, to steal file attachments uploaded by other users by specifying arbitrary attachment IDs in the 'description_attachments' parameter, re-associating those files to their own tickets and removing access from the original owners. |
| The SupportCandy – Helpdesk & Customer Support Ticket System plugin for WordPress is vulnerable to SQL Injection via the Number-type custom field filter in all versions up to, and including, 3.4.4. This is due to insufficient escaping on the user-supplied operand value when using the equals operator and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Subscriber-level access and above (customers), to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The Booking Calendar plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the wpbc_ajax_WPBC_FLEXTIMELINE_NAV() function in all versions up to, and including, 10.14.13. This makes it possible for unauthenticated attackers to retrieve booking information including customer names, phones and emails. |
| The Ajax Load More – Infinite Scroll, Load More, & Lazy Load plugin for WordPress is vulnerable to unauthorized access of data due to incorrect authorization on the parse_custom_args() function in all versions up to, and including, 7.8.1. This makes it possible for unauthenticated attackers to expose the titles and excerpts of private, draft, pending, scheduled, and trashed posts. |
