| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. When Git asks for credentials via a terminal prompt (i.e. without using any credential helper), it prints out the host name for which the user is expected to provide a username and/or a password. At this stage, any URL-encoded parts have been decoded already, and are printed verbatim. This allows attackers to craft URLs that contain ANSI escape sequences that the terminal interpret to confuse users e.g. into providing passwords for trusted Git hosting sites when in fact they are then sent to untrusted sites that are under the attacker's control. This issue has been patch via commits `7725b81` and `c903985` which are included in release versions v2.48.1, v2.47.2, v2.46.3, v2.45.3, v2.44.3, v2.43.6, v2.42.4, v2.41.3, and v2.40.4. Users are advised to upgrade. Users unable to upgrade should avoid cloning from untrusted URLs, especially recursive clones. |
| Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. Git defines a line-based protocol that is used to exchange information between Git and Git credential helpers. Some ecosystems (most notably, .NET and node.js) interpret single Carriage Return characters as newlines, which renders the protections against CVE-2020-5260 incomplete for credential helpers that treat Carriage Returns in this way. This issue has been addressed in commit `b01b9b8` which is included in release versions v2.48.1, v2.47.2, v2.46.3, v2.45.3, v2.44.3, v2.43.6, v2.42.4, v2.41.3, and v2.40.4. Users are advised to upgrade. Users unable to upgrade should avoid cloning from untrusted URLs, especially recursive clones. |
| Git is a source code management tool. When cloning from a server (or fetching, or pushing), informational or error messages are transported from the remote Git process to the client via the so-called "sideband channel". These messages will be prefixed with "remote:" and printed directly to the standard error output. Typically, this standard error output is connected to a terminal that understands ANSI escape sequences, which Git did not protect against. Most modern terminals support control sequences that can be used by a malicious actor to hide and misrepresent information, or to mislead the user into executing untrusted scripts. As requested on the git-security mailing list, the patches are under discussion on the public mailing list. Users are advised to update as soon as possible. Users unable to upgrade should avoid recursive clones unless they are from trusted sources. |
| Remote staging in Liferay Portal 7.4.0 through 7.4.3.105, and older unsupported versions, and Liferay DXP 2023.Q4.0, 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions does not properly obtain the remote address of the live site from the database which, which allows remote authenticated users to exfiltrate data to an attacker controlled server (i.e., a fake “live site”) via the _com_liferay_exportimport_web_portlet_ExportImportPortlet_remoteAddress and _com_liferay_exportimport_web_portlet_ExportImportPortlet_remotePort parameters. To successfully exploit this vulnerability, an attacker must also successfully obtain the staging server’s shared secret and add the attacker controlled server to the staging server’s whitelist. |
| Vault and Vault Enterprise’s (“Vault”) ldap auth method may not have correctly enforced MFA if username_as_alias was set to true and a user had multiple CNs that are equal but with leading or trailing spaces. Fixed in Vault Community Edition 1.20.2 and Vault Enterprise 1.20.2, 1.19.8, 1.18.13, and 1.16.24. |
| Improper Neutralization of Escape, Meta, or Control Sequences vulnerability in Apache HTTP Server through environment variables set via the Apache configuration unexpectedly superseding variables calculated by the server for CGI programs.
This issue affects Apache HTTP Server from 2.4.0 through 2.4.65.
Users are recommended to upgrade to version 2.4.66 which fixes the issue. |
| Improper Neutralization of Escape, Meta, or Control Sequences vulnerability in Apache Tomcat.
Tomcat did not escape ANSI escape sequences in log messages. If Tomcat was running in a console on a Windows operating system, and the console supported ANSI escape sequences, it was possible for an attacker to use a specially crafted URL to inject ANSI escape sequences to manipulate the console and the clipboard and attempt to trick an administrator into running an attacker controlled command. While no attack vector was found, it may have been possible to mount this attack on other operating systems.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.10, from 10.1.0-M1 through 10.1.44, from 9.0.40 through 9.0.108.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.60 though 8.5.100. Other, older, EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.11 or later, 10.1.45 or later or 9.0.109 or later, which fix the issue. |
| Unauthenticated Arbitrary File Read via Null Byte Injection in DB Electronica Telecomunicazioni S.p.A. Mozart FM Transmitter versions 30, 50, 100, 300, 500, 1000, 2000, 3000, 3500, 6000, 7000 allows an attacker to perform Null byte injection in download_setting.php allows reading arbitrary files.
The `/var/tdf/download_setting.php` endpoint constructs file paths by concatenating user-controlled `$_GET['filename']` with a forced `.tgz` extension. Running on PHP 5.3.2 (pre-5.3.4), the application is vulnerable to null byte injection (%00), allowing attackers to bypass the extension restriction and traverse paths. By requesting `filename=../../../../etc/passwd%00`, the underlying C functions treat the null byte as a string terminator, ignoring the appended `.tgz` and enabling unauthenticated arbitrary file disclosure of any file readable by the web server user. |
| HackerOne community member Dao Hoang Anh (yoyomiski) has reported an improper neutralization of whitespace in the username when adding new users. A username with leading or trailing whitespace could be virtually indistinguishable from its legitimate counterpart when the username is displayed in the UI, potentially leading to confusion. |
| A flaw was found in the X.Org server. The GLX PBuffer code does not call the XACE hook when creating the buffer, leaving it unlabeled. When the client issues another request to access that resource (as with a GetGeometry) or when it creates another resource that needs to access that buffer, such as a GC, the XSELINUX code will try to use an object that was never labeled and crash because the SID is NULL. |
| Unauthenticated attackers can send configuration settings to device and possible perform physical actions remotely (e.g., on/off). |
| Socket Firewall is an HTTP/HTTPS proxy server that intercepts package manager requests and enforces security policies by blocking dangerous packages. Socket Firewall binary versions (separate from installers) prior to 0.15.5 are vulnerable to arbitrary code execution when run in untrusted project directories. The vulnerability allows an attacker to execute arbitrary code by placing a malicious `.sfw.config` file in a project directory. When a developer runs Socket Firewall commands (e.g., `sfw npm install`) in that directory, the tool loads the `.sfw.config` file and populates environment variables directly into the Node.js process. An attacker can exploit this by setting `NODE_OPTIONS` with a `--require` directive to execute malicious JavaScript code before Socket Firewall's security controls are initialized, effectively bypassing the tool's malicious package detection. The attack vector is indirect and requires a developer to install dependencies for an untrusted project and execute a command within the context of the untrusted project. The vulnerability has been patched in Socket Firewall version 0.15.5. Users should upgrade to version 0.15.5 or later. The fix isolates configuration file values from subprocess environments. Look at `sfw --version` for version information. If users rely on the recommended installation mechanism (e.g. global installation via `npm install -g sfw`) then no workaround is necessary. This wrapper package automatically ensures that users are running the latest version of Socket Firewall. Users who have manually installed the binary and cannot immediately upgrade should avoid running Socket Firewall in untrusted project directories. Before running Socket Firewall in any new project, inspect `.sfw.config` and `.env.local` files for suspicious `NODE_OPTIONS` or other environment variable definitions that reference local files. |
| OpenBao exists to provide a software solution to manage, store, and distribute sensitive data including secrets, certificates, and keys. In versions 0.1.0 through 2.3.1, OpenBao's TOTP secrets engine could accept valid codes multiple times rather than strictly-once. This was caused by unexpected normalization in the underlying TOTP library. To work around, ensure that all codes are first normalized before submitting to the OpenBao endpoint. TOTP code verification is a privileged action; only trusted systems should be verifying codes. |
| Soft Serve is a self-hostable Git server for the command line. In versions prior to 0.10.0, there are several places where the user can insert data (e.g. names) and ANSI escape sequences are not being removed, which can then be used, for example, to show fake alerts. In the same token, git messages, when printed, are also not being sanitized. This issue is fixed in version 0.10.0. |
| ssh in OpenSSH before 10.1 allows control characters in usernames that originate from certain possibly untrusted sources, potentially leading to code execution when a ProxyCommand is used. The untrusted sources are the command line and %-sequence expansion of a configuration file. (A configuration file that provides a complete literal username is not categorized as an untrusted source.) |
| A vulnerability was found in the netavark package, a network stack for containers used with Podman. Due to dns.podman search domain being removed, netavark may return external servers if a valid A/AAAA record is sent as a response. When creating a container with a given name, this name will be used as the hostname for the container itself, as the podman's search domain is not added anymore the container is using the host's resolv.conf, and the DNS resolver will try to look into the search domains contained on it. If one of the domains contain a name with the same hostname as the running container, the connection will forward to unexpected external servers. |
| In Wing FTP Server before 7.4.4. the user and admin web interfaces mishandle '\0' bytes, ultimately allowing injection of arbitrary Lua code into user session files. This can be used to execute arbitrary system commands with the privileges of the FTP service (root or SYSTEM by default). This is thus a remote code execution vulnerability that guarantees a total server compromise. This is also exploitable via anonymous FTP accounts. |
| Insufficient escaping of user-supplied data in mod_ssl in Apache HTTP Server 2.4.63 and earlier allows an untrusted SSL/TLS client to insert escape characters into log files in some configurations.
In a logging configuration where CustomLog is used with "%{varname}x" or "%{varname}c" to log variables provided by mod_ssl such as SSL_TLS_SNI, no escaping is performed by either mod_log_config or mod_ssl and unsanitized data provided by the client may appear in log files. |
| wall in util-linux through 2.40, often installed with setgid tty permissions, allows escape sequences to be sent to other users' terminals through argv. (Specifically, escape sequences received from stdin are blocked, but escape sequences received from argv are not blocked.) There may be plausible scenarios where this leads to account takeover. |
| In PHP versions 8.1.* before 8.1.30, 8.2.* before 8.2.24, 8.3.* before 8.3.12, when using PHP-FPM SAPI and it is configured to catch workers output through catch_workers_output = yes, it may be possible to pollute the final log or remove up to 4 characters from the log messages by manipulating log message content. Additionally, if PHP-FPM is configured to use syslog output, it may be possible to further remove log data using the same vulnerability. |
