| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4 fails to encrypt the initramfs contents, allowing for the offline recovery of secrets and cryptographic details. |
| DJI drones transmit DUML (DJI Universal Markup Language) protocol messages over BLE (Bluetooth Low Energy) without encryption. When a client attempts to connect to the drone over Wi-Fi, or when the drone is switched to QuickTransfer mode, the DJI Fly application exchanges DUML messages with the drone over BLE, including the Wi-Fi credentials. An attacker within BLE range can passively sniff this traffic and recover the credentials in cleartext, including the drone's Wi-Fi PSK, SSID, and trusted identifier UUID. Obtaining these credentials allows the attacker to join the drone's internal Wi-Fi network, interact with network services exposed by the drone, and decrypt Wi-Fi traffic exchanged between the drone and the legitimate user.
* An attacker within BLE range recovers the Wi-Fi SSID and PSK in cleartext, and can then join the drone's network
* The same capture also exposes the session UUID identifier, which is the only thing the drone uses to tell a trusted client from an unknown one, so the attacker can replay it and skip the physical confirmation of new connected devices.
* The credentials do not change between sessions unless the operator manually resets the Wi-Fi settings, so one capture stays valid indefinitely
* The attack is fully passive, with nothing transmitted and no connection made, so neither the operator nor the drone has any indication the session was observed
* A BLE sniffer and presence during one normal DJI Fly connection are needed
Affected models are DJI Neo until 01.00.0400, DJI Neo 2 until 01.00.0500, DJI Flip until 01.00.1200, DJI Air 3 until 01.00.1600, DJI Air 3S until 01.00.1400, DJI Avata 2 until 01.00.0400, DJI Avata 360 until 01.00.0300, DJI Mavic 3 until 01.00.1400, DJI Mavic 3 Classic until 01.00.0800, DJI Mavic 3 Pro until 01.01.0700, DJI Mavic 4 Pro until 01.00.0500, DJI Mini 2 until 01.07.0200, DJI Mini 3 until 01.00.0500, DJI Mini 3 Pro until 01.00.0900, DJI Mini 4 Pro until 01.00.1100, and DJI Mini 5 Pro until 01.00.0600.
Remediation requires a firmware update from the vendor. There is no user-side mitigation that fully addresses the vulnerability without upgrading. |
| Missing encryption of sensitive data in Smart Switch prior to version 3.7.72.6 allows adjacent attackers to intercept transmitted data. |
| A vulnerability was determined in TRENDnet TEW-WLC100 2.05b02. This affects an unknown function of the file /etc/racoon.conf of the component IKE Phase 1 Aggressive Mode. This manipulation of the argument exchange_mode causes missing encryption of sensitive data. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is reported as difficult. The vendor was contacted early about this disclosure. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20157 are related to missing encryption that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-311. |
| Missing Encryption of Sensitive Data vulnerability in Apache Tomcat due to the fix for CVE-2026-29146 allowing the bypass of the EncryptInterceptor.
This issue affects Apache Tomcat: 11.0.20, 10.1.53, 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117, which fix the issue. |
| Unauthorized use of Kyocera printers, allows all information stored in the Kyocera address book to be exported. The security measure that encrypts incoming data ian be bypassed with this vulnerability, allowing encrypted data to be decrypted. Passwords and other sensitive information can be obtained. This affects Kyocera Command Center RX TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 2553ci, TASKalfa 3253ci, TASKalfa 3554ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 7052ci, TASKalfa 8052ci, TASKalfa 7353ci, TASKalfa 8353ci, TASKalfa 2554ci, TASKalfa 3254ci, TASKalfa 505. |
| CoreWCF is a port of the service side of Windows Communication Foundation (WCF) to .NET Core. In version 1.9.0, CoreWCF SPNEGO SecurityContextToken negotiation can expose the proof key recovered from the RSTR when TransportWithMessageCredential with Windows client credentials and session establishment are used, allowing an observer to impersonate the authenticated Windows principal and decrypt or forge WS-SecureConversation traffic. This issue is fixed in version 1.9.1. |
| Guzzle is an extensible PHP HTTP client. Prior to 7.12.1, in certain configurations, traffic expected to be protected by TLS on the hop to the proxy is transmitted in cleartext. Proxy authentication credentials (the Proxy-Authorization header, proxy userinfo in the proxy URL, or CURLOPT_PROXYUSERPWD) are sent without encryption, and the CONNECT target host and port for tunneled HTTPS requests are exposed. The built-in cURL handlers (GuzzleHttp\Handler\CurlHandler and GuzzleHttp\Handler\CurlMultiHandler, used by default whenever the PHP cURL extension is available) accept an https:// proxy. libcurl older than 7.50.2 silently treats an https:// proxy as a plaintext http:// proxy. The TLS connection to the proxy is never established, and the proxy leg is cleartext with no error or warning. An application is affected when it sends requests through one of the built-in cURL handlers, configures an https:// proxy expecting the proxy connection itself to be encrypted, and runs with libcurl older than 7.50.2. This vulnerability is fixed in 7.12.1. |
| Jenkins 2.567 and earlier, LTS 2.555.2 and earlier does not encrypt secrets from POST config.xml submissions before storing them in job configurations unencrypted in job config.xml files on the Jenkins controller where they can be viewed by users with Item/Extended Read permission, or access to the Jenkins controller file system. |
| An insecure communication was found between a user and the Orpak SiteOmat management console for all known versions, due to an invalid SSL certificate. The attack allows for an eavesdropper to capture the communication and decrypt the data. |
| A CWE-311: Missing Encryption of Sensitive Data vulnerability exists in Modicon M221 (all references, all versions) that could allow the attacker to find the password hash when the attacker has captured the traffic between EcoStruxure Machine - Basic software and Modicon M221 controller and broke the encryption keys. |
| When saving HSTS data to an excessively long file name, curl could end up
removing all contents, making subsequent requests using that file unaware of
the HSTS status they should otherwise use. |
| A privacy issue was addressed by removing the vulnerable code. This issue is fixed in macOS Sequoia 15.6. A sandboxed process may be able to circumvent sandbox restrictions. |
| Antrea is a Kubernetes networking solution intended to be Kubernetes native. Prior to 2.4.5 and 2.5.2, a missing encryption vulnerability affects inter-Node Pod traffic. In Antrea clusters configured for dual-stack networking with IPsec encryption enabled (trafficEncryptionMode: ipsec), Antrea fails to apply encryption for IPv6 Pod traffic. While the IPv4 traffic is correctly encrypted via ESP (Encapsulating Security Payload), traffic using IPv6 is transmitted in plaintext. This occurs because the packets are encapsulated (using Geneve or VXLAN) but bypass the IPsec encryption layer. Impacted Users: users with dual-stack clusters and IPsec encryption enabled. Single-stack IPv4 or IPv6 clusters are not affected. This vulnerability is fixed in 2.4.5 and 2.5.2. |
| The login_to_simulator method in Linden Lab Second Life, as used by the secondlife:// protocol handler and possibly other Second Life login mechanisms, sends an MD5 hash in cleartext in the passwd field, which allows remote attackers to login to an account by sniffing the network and then sending this hash to a Second Life authentication server. |
| Nginx UI is a web user interface for the Nginx web server. Prior to version 2.3.3, the /api/backup endpoint is accessible without authentication and discloses the encryption keys required to decrypt the backup in the X-Backup-Security response header. This allows an unauthenticated attacker to download a full system backup containing sensitive data (user credentials, session tokens, SSL private keys, Nginx configurations) and decrypt it immediately. This issue has been patched in version 2.3.3. |
| On Arista CloudVision Appliance (CVA) affected releases running on appliances that support hardware disk encryption (DCA-350E-CV only), the disk encryption might not be successfully performed. This results in the disks remaining unsecured and data on them |
| A vulnerability has been identified in SIRIUS 3RK3 Modular Safety System (MSS) (All versions), SIRIUS Safety Relays 3SK2 (All versions). The affected devices do not encrypt data in transit. An attacker with network access could eavesdrop the connection and retrieve sensitive information, including obfuscated safety passwords. |
| The Temporal api-go library prior to version 1.44.1 did not send `update response` information to Data Converter when the proxy package within the api-go module was used in a gRPC proxy prior to transmission. This resulted in information contained within the `update response` field not having Data Converter transformations (e.g. encryption) applied. This is an issue only when using the UpdateWorkflowExecution APIs (released on 13th January 2025) with a proxy leveraging the api-go library before version 1.44.1.
Other data fields were correctly sent to Data Converter. This issue does not impact the Data Converter server. Data was encrypted in transit. Temporal Cloud services are not impacted. |
