| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 could allow an authenticated user to cause a denial of service using a specially crafted HTTP query due to improper allocation of system resources |
| amqp091-go is a Go AMQP 0.9.1 client. From 1.13.0 until 1.14.0, the frame-size mitigation from the prior allocation advisory can be bypassed before connection.tune completes because Connection.maxFrameSize uses zero for both the not-yet-negotiated and negotiated-unlimited states. A malicious or compromised AMQP peer can send a short body-frame header with a large declared payload length, causing ReadFrame and the body-frame parser to allocate attacker-selected memory before the payload is received or the frame's protocol state is rejected. The condition is reachable through public Open even when Config.FrameSize is set to the protocol minimum and can cause severe memory pressure, out-of-memory termination, or loss of the client process before authentication completes. This issue is fixed in version 1.14.0. |
| simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. Prior to 4.0.0, the default blockUnsafeOperationsPlugin does not completely reject configuration includes supplied through customArgs to git.clone(). The missing include.path classification permits Git to load an attacker-controlled configuration file, and the initial remediation does not cover includeIf.<condition>.path, allowing the same file-loading primitive through a conditional include. A loaded configuration can set an executable Git option such as core.sshCommand, which Git invokes during the clone operation with the privileges of the Node.js process. Exploitation requires the application to pass attacker-influenced custom arguments and requires an attacker-controlled file that the process can read. This issue is fixed in 4.0.0. |
| simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. Prior to 4.0.0, the default blockUnsafeOperationsPlugin compares parsed option names with literal dangerous option spellings while Git accepts unambiguous long-option abbreviations. Attacker-influenced push arguments such as abbreviated --receive-pack or --exec forms can therefore bypass detectVulnerableFlags, reach git push against a local or file remote or an attacker-influenced receive-pack target, and cause Git to invoke an attacker-selected command in consumers that expose those arguments. The clone-side abbreviation handling does not protect the push path. This issue is fixed in 4.0.0. |
| Uncontrolled eviction in the pending sign-in tables of the REST API in Progressive Robot hMailServer 6.3.4 and 6.3.5 allows a remote unauthenticated attacker to make other users' OpenID Connect, SAML and passkey sign-ins fail. The routes that start a single sign-on and hand out a passkey sign-in challenge are reached without authentication and stored pending state in bounded tables that dropped their oldest entry when full, whoever had started it. An attacker who starts sign-ins a few times a second (about a hundred a second for passkeys) pushes every other user's pending sign-in out of the table before that user's browser returns, denying single sign-on and passkey sign-in for as long as the requests continue. |
| Pydantic AI is a Python agent framework for building applications and workflows with Generative AI. From 2.10.0 until 2.53.0, streamed requests made through ConcurrencyLimitedModel or limit_model_concurrency can retain shared concurrency slots because anyio.CapacityLimiter associates an acquired slot with the borrowing task while streaming cleanup can run in a different task. Early stream termination, cancellation, consumer exceptions, or complete stream_text() consumption with debounce_by=0.1 can therefore leave capacity occupied, eventually preventing later requests that share the long-lived limiter from proceeding and causing a denial of service. Agent-level max_concurrency and non-streaming model requests are not affected. This issue is fixed in version 2.53.0. |
| An uncontrolled resource consumption vulnerability in Fireware OS's diagnostic tasks feature allows a low-privileged, authenticated user to cause a denial of service of the system's diagnostic tools by repeatedly starting and aborting a specially crafted diagnostic task through the web UI. |
| Allocation of resources without limits or throttling vulnerability in the Apache Struts REST plugin. A request body is read into memory without any bound on how much will be accepted, so a single request can cause the server to allocate memory in proportion to its size, exhausting the Java heap and denying service to other users. No additional setting has to be enabled. Applications that do not use the REST plugin are not affected.
This issue affects Apache Struts: from 2.1.8 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.11.0, from 7.0.0 through 7.3.0.
Users are recommended to upgrade to version 6.12.0 or 7.4.0, which fixes the issue. |
| Asymmetric resource consumption (amplification) vulnerability in Apache Struts. When a request parameter is bound to an arbitrary-precision decimal (java.math.BigDecimal) property that is then rendered through the Struts tag library, the framework can produce a response many orders of magnitude larger than the request, allowing an unauthenticated remote attacker to exhaust server CPU and outbound network capacity with sustained low-volume traffic. Applications that do not bind request parameters to BigDecimal properties, or never render such a property through the Struts tag library, are not affected.
This issue affects Apache Struts: from 2.5.14 through 2.5.33, from 6.0.0 through 6.11.0, from 7.0.0 through 7.3.0.
Users are recommended to upgrade to version 6.12.0 or 7.4.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix dma mapping leak in stmmac_tso_xmit()
In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the
frame is dropped but the DMA mappings already created for the linear
part and for the fragments mapped before the failure are never
unmapped, leaking DMA mappings.
Fix the leak by walking back over the descriptors used by the frame and
releasing each of them with stmmac_free_tx_buffer(). Moreover, release
the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues
While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not
set the requeue list for a requeued command to be kicked in the future.
The expectation is a call to scsi_run_host_queues() will kick all SCSI
devices once the recovery state is cleared.
However, scsi_run_host_queues() uses shost_for_each_device() which uses
scsi_device_get() and so will ignore devices in a partially removed
state like SDEV_CANCEL. But these devices may also have requeued
requests, leaving their requests stuck from not being kicked and causing
the removal process of the device to hang.
scsi_run_host_queues() needs to run against more devices than the macro
shost_for_each_device() allows. Instead of using the too limiting
scsi_device_get() state checks, only ignore devices in SDEV_DEL state or
when unable to acquire a reference. Attempt to run the queues for all
other devices when scsi_run_host_queues() is called. |
| Apache Struts 2.3.19 to 2.3.20.2, 2.3.21 to 2.3.24.1, and 2.3.25 to 2.3.28, when Dynamic Method Invocation is enabled, allow remote attackers to execute arbitrary code via method: prefix, related to chained expressions. |
| savg-sanitizer is a PHP SVG/XML sanitizer. Prior to 1.0.0, svg-sanitizer allows a crafted SVG DTD with a #FIXED attribute default to make cleanAttributesOnWhitelist() perform a double DOMElement::removeAttribute() call on the same attribute name in src/Sanitizer.php. The first removal deletes the explicit attribute, while the DTD default rematerializes the value before the href safety path performs the second removal, which can corrupt libxml state and terminate the PHP worker. An attacker who can submit SVG content to a sanitization endpoint can repeatedly interrupt workers and degrade or exhaust application availability. This issue is fixed in version 1.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: rss: fix indir_table and hkey leak on get_rxfh failure
rss_prepare_get() allocates the indirection table and hash key buffer
via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them.
If get_rxfh() fails, the function returns an error without freeing
the allocation. |
| IBM DataPower Gateway 10.5.0.0 through 10.5.0.22, 10.6.1 through 10.6.6, 10.6.0.0 through 10.6.0.10, and 11.0.0.0 through 11.0.0.2 could allow a remote attacker to cause a denial of service due to improper validation of the length field during memory reallocation. |
| Uncontrolled eviction in the browser session table of the REST API in Progressive Robot hMailServer 6.2.28 through 6.3.5 allows a remote authenticated user to end other users' sessions. The table of browser sessions, shared by every account, the server administrator and support sessions, dropped its least recently used session whenever it was full, whoever it belonged to, and placed no limit on how many sessions one account could hold. A user who repeatedly signs in with their own mailbox password can therefore keep the table full and sign out every webmail and administration session that is idle for more than a short time, for as long as they continue. |
| ImageMagick before 7.1.2-31 contains a resource leak vulnerability that allows attackers to leave file pointers open by supplying a crafted magick script. Attackers can process malicious magick scripts to leak file descriptors, potentially exhausting resources and causing denial of service. |
| An optional, separately licensed repository-connector feature in Kiteworks Core did not neutralize special characters in a user-supplied path before passing it to an external command. An authenticated system administrator could inject additional commands and write arbitrary content to files owned by the service account running the connector, enabling code execution in that account's context; exploitation additionally requires network egress from the appliance to a system under the attacker's control. |
| A flaw was found in the OpenSSH package. For each ping packet the SSH server receives, a pong packet is allocated in a memory buffer and stored in a queue of packages. It is only freed when the server/client key exchange has finished. A malicious client may keep sending such packages, leading to an uncontrolled increase in memory consumption on the server side. Consequently, the server may become unavailable, resulting in a denial of service attack. |
| An input validation vulnerability exists in the security certificate management component of the Brocade Fabric OS administrative management API. When processing certificate management operations, user-supplied certificate identifiers are handled without adequate sanitization prior to execution in external system routines. An authenticated attacker with privileges to perform certificate deletion requests can leverage this flaw to execute arbitrary system commands with the privileges of the underlying management daemon. This vulnerability affects Fabric OS versions before 9.2.2d and 10.0.0 through 10.0.0a1. |
