| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fix scsi_mode_sense() buffer length handling
Several problems exist with scsi_mode_sense() buffer length handling:
1) The allocation length field of the MODE SENSE(10) command is 16-bits,
occupying bytes 7 and 8 of the CDB. With this command, access to mode
pages larger than 255 bytes is thus possible. However, the CDB
allocation length field is set by assigning len to byte 8 only, thus
truncating buffer length larger than 255.
2) If scsi_mode_sense() is called with len smaller than 8 with
sdev->use_10_for_ms set, or smaller than 4 otherwise, the buffer length
is increased to 8 and 4 respectively, and the buffer is zero filled
with these increased values, thus corrupting the memory following the
buffer.
Fix these 2 problems by using put_unaligned_be16() to set the allocation
length field of MODE SENSE(10) CDB and by returning an error when len is
too small.
Furthermore, if len is larger than 255B, always try MODE SENSE(10) first,
even if the device driver did not set sdev->use_10_for_ms. In case of
invalid opcode error for MODE SENSE(10), access to mode pages larger than
255 bytes are not retried using MODE SENSE(6). To avoid buffer length
overflows for the MODE_SENSE(10) case, check that len is smaller than 65535
bytes.
While at it, also fix the folowing:
* Use get_unaligned_be16() to retrieve the mode data length and block
descriptor length fields of the mode sense reply header instead of using
an open coded calculation.
* Fix the kdoc dbd argument explanation: the DBD bit stands for Disable
Block Descriptor, which is the opposite of what the dbd argument
description was. |
| Multiple out-of-bounds read and write vulnerabilities exist in the ControlVault WBDI Driver Broadcom Storage Adapter functionality of Dell ControlVault3 prior to 5.15.14.19 and Dell ControlVault3 Plus prior to 6.2.36.47. A specially crafted WinBioControlUnit call can lead to memory corruption. An attacker can issue an api call to trigger this vulnerability. This vulnerability is triggered when submitting a `WinBioControlUnit` call to the StorageAdapter with the ControlCode 0 (`WBIO_USH_GET_TEMPLATE`) and with either and an invalid `ReceiveBuferSize` and/or an invalid `SendBufferSize`. |
| Incorrect boundary conditions in the Graphics: WebGPU component. This vulnerability affects Firefox < 145 and Thunderbird < 145. |
| Multiple out-of-bounds read and write vulnerabilities exist in the ControlVault WBDI Driver Broadcom Storage Adapter functionality of Dell ControlVault3 prior to 5.15.14.19 and Dell ControlVault3 Plus prior to 6.2.36.47. A specially crafted WinBioControlUnit call can lead to memory corruption. An attacker can issue an api call to trigger this vulnerability. This vulnerability is triggered when submitting a `WinBioControlUnit` call to the StorageAdapter with the ControlCode 2 (`WBIO_USH_GET_IDENTITY`) with an improper `ReceiveBuferSize` value. |
| Multiple out-of-bounds read and write vulnerabilities exist in the ControlVault WBDI Driver Broadcom Storage Adapter functionality of Dell ControlVault3 prior to 5.15.14.19 and Dell ControlVault3 Plus prior to 6.2.36.47. A specially crafted WinBioControlUnit call can lead to memory corruption. An attacker can issue an api call to trigger this vulnerability. This vulnerability is triggered when submitting a `WinBioControlUnit` call to the StorageAdapter with the ControlCode 3 (`WBIO_USH_CREATE_CHALLENGE`) with an invalid `ReceiveBuferSize`. |
| Multiple out-of-bounds read and write vulnerabilities exist in the ControlVault WBDI Driver Broadcom Storage Adapter functionality of Dell ControlVault3 prior to 5.15.14.19 and Dell ControlVault3 Plus prior to 6.2.36.47. A specially crafted WinBioControlUnit call can lead to memory corruption. An attacker can issue an api call to trigger this vulnerability. This vulnerability is triggered when submitting a `WinBioControlUnit` call to the StorageAdapter with the ControlCode 4 (`WBIO_USH_ADD_RECORD`) and with an invalid `SendBufferSize`. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/cpu: Avoid running off the end of an AMD erratum table
The NULL array terminator at the end of erratum_1386_microcode was
removed during the switch from x86_cpu_desc to x86_cpu_id. This
causes readers to run off the end of the array.
Replace the NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Avoid stack buffer overflow from kernel cmdline
While the kernel command line is considered trusted in most environments,
avoid writing 1 byte past the end of "acpiid" if the "str" argument is
maximum length. |
| A vulnerability in the SNMP subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause a DoS condition on an affected device.
This vulnerability is due to improper error handling when parsing SNMP requests. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMP v2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMP v3, the attacker must have valid SNMP user credentials for the affected system. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 HTTP Decoder that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart.
This vulnerability is due to a lack of complete error checking when the MIME fields of the HTTP header are parsed. An attacker could exploit this vulnerability by sending crafted HTTP packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine unexpectedly restarts. |
| In OpenBSD 7.3 before errata 016, npppd(8) could crash by a l2tp message which has an AVP (Attribute-Value Pair) with wrong length.
|
| A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, causing a denial of service (DoS) condition.
This vulnerability is due to improper handling of malformed Control and Provisioning of Wireless Access Points (CAPWAP) packets. An attacker could exploit this vulnerability by sending malformed CAPWAP packets through an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. |
| Dell iDRAC Service Module (iSM), versions prior to 6.0.3.0, contains a Buffer Access with Incorrect Length Value vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Code execution and Elevation of privileges. |
| The GLX extension in XFree86 4.0, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) __glXDisp_Render, (2) __glXDisp_RenderLarge, (3) __glXDispSwap_VendorPrivate, (4) __glXDispSwap_VendorPrivateWithReply, (5) set_client_info, (6) __glXDispSwap_SetClientInfoARB, (7) DoSwapInterval, (8) DoGetProgramString, (9) DoGetString, (10) __glXDispSwap_RenderMode, (11) __glXDisp_GetCompressedTexImage, (12) __glXDispSwap_GetCompressedTexImage, (13) __glXDisp_FeedbackBuffer, (14) __glXDispSwap_FeedbackBuffer, (15) __glXDisp_SelectBuffer, (16) __glXDispSwap_SelectBuffer, (17) __glXDisp_Flush, (18) __glXDispSwap_Flush, (19) __glXDisp_Finish, (20) __glXDispSwap_Finish, (21) __glXDisp_ReadPixels, (22) __glXDispSwap_ReadPixels, (23) __glXDisp_GetTexImage, (24) __glXDispSwap_GetTexImage, (25) __glXDisp_GetPolygonStipple, (26) __glXDispSwap_GetPolygonStipple, (27) __glXDisp_GetSeparableFilter, (28) __glXDisp_GetSeparableFilterEXT, (29) __glXDisp_GetConvolutionFilter, (30) __glXDisp_GetConvolutionFilterEXT, (31) __glXDisp_GetHistogram, (32) __glXDisp_GetHistogramEXT, (33) __glXDisp_GetMinmax, (34) __glXDisp_GetMinmaxEXT, (35) __glXDisp_GetColorTable, (36) __glXDisp_GetColorTableSGI, (37) GetSeparableFilter, (38) GetConvolutionFilter, (39) GetHistogram, (40) GetMinmax, or (41) GetColorTable function. |
| The SProcXFixesSelectSelectionInput function in the XFixes extension in X.Org X Window System (aka X11 or X) X11R6.8.0 and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length value. |
| The RandR extension in XFree86 4.2.0, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) SProcRRQueryVersion, (2) SProcRRGetScreenInfo, (3) SProcRRSelectInput, or (4) SProcRRConfigureOutputProperty function. |
| The XVideo extension in XFree86 4.0.0, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) SProcXvQueryExtension, (2) SProcXvQueryAdaptors, (3) SProcXvQueryEncodings, (4) SProcXvGrabPort, (5) SProcXvUngrabPort, (6) SProcXvPutVideo, (7) SProcXvPutStill, (8) SProcXvGetVideo, (9) SProcXvGetStill, (10) SProcXvPutImage, (11) SProcXvShmPutImage, (12) SProcXvSelectVideoNotify, (13) SProcXvSelectPortNotify, (14) SProcXvStopVideo, (15) SProcXvSetPortAttribute, (16) SProcXvGetPortAttribute, (17) SProcXvQueryBestSize, (18) SProcXvQueryPortAttributes, (19) SProcXvQueryImageAttributes, or (20) SProcXvListImageFormats function. |
| The SProcXCMiscGetXIDList function in the XC-MISC extension in X.Org X Window System (aka X11 or X) X11R6.0 and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value. |
| The Render extension in XFree86 4.0.1, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) ProcRenderQueryVersion, (2) SProcRenderQueryVersion, (3) SProcRenderQueryPictFormats, (4) SProcRenderQueryPictIndexValues, (5) SProcRenderCreatePicture, (6) SProcRenderChangePicture, (7) SProcRenderSetPictureClipRectangles, (8) SProcRenderFreePicture, (9) SProcRenderComposite, (10) SProcRenderScale, (11) SProcRenderCreateGlyphSet, (12) SProcRenderReferenceGlyphSet, (13) SProcRenderFreeGlyphSet, (14) SProcRenderFreeGlyphs, or (15) SProcRenderCompositeGlyphs function. |
| X.Org Server (aka xserver and xorg-server) 1.15.0 through 1.16.x before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) sproc_dri3_query_version, (2) sproc_dri3_open, (3) sproc_dri3_pixmap_from_buffer, (4) sproc_dri3_buffer_from_pixmap, (5) sproc_dri3_fence_from_fd, (6) sproc_dri3_fd_from_fence, (7) proc_present_query_capabilities, (8) sproc_present_query_version, (9) sproc_present_pixmap, (10) sproc_present_notify_msc, (11) sproc_present_select_input, or (12) sproc_present_query_capabilities function in the (a) DRI3 or (b) Present extension. |
