| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: keep chunk->transport in step with the list it is queued on
__sctp_outq_flush_rtx() moves a gap-acked chunk onto another transport's
transmitted list without updating chunk->transport:
if (chunk->tsn_gap_acked) {
list_move_tail(&chunk->transmitted_list,
&transport->transmitted);
continue;
}
The chunk then sits on a live transport's list while chunk->transport still
names a different one. If that transport is removed - sctp_assoc_rm_peer()
from an ASCONF Delete-IP - sctp_transport_free() RCU-frees it and the chunk
is left with a dangling pointer. sctp_assoc_rm_peer() scrubs
peer->transmitted and asoc->outqueue.out_chunk_list, but the chunk is on
neither.
The pointer is not followed while tsn_gap_acked is set. A SACK that
reneges on the TSN clears the flag, and the next SACK reaches
tchunk->transport->flight_size -= sctp_data_size(tchunk);
inside the freed transport. KASAN reports a slab-use-after-free read in
sctp_check_transmitted(), freed from sctp_assoc_rm_peer(). Both the
removal and the SACKs come from the association peer.
Set chunk->transport at the move. The ordinary resend path needs nothing:
it reaches its list_move_tail() only after sctp_packet_append_chunk()
returned SCTP_XMIT_OK, and __sctp_packet_append_chunk() has rebound the
chunk by then.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| Issue summary: A specially crafted PKCS#7 or S/MIME signed message could
trigger a use-after-free during PKCS#7 signature verification.
Impact summary: A use-after-free may result in process crashes, heap
corruption, or potentially remote code execution.
When processing a PKCS#7 or S/MIME signed message, if the SignedData
digestAlgorithms field is present as an empty ASN.1 SET, OpenSSL may
incorrectly free a caller-owned BIO during PKCS7_verify(). A subsequent
use of the BIO by the calling application results in a use-after-free
condition.
In the common case this occurs when the application later calls
BIO_free() on the BIO originally passed to PKCS7_verify(). Depending
on allocator behavior and application-specific BIO usage patterns, this
may result in a crash or other memory corruption. In some application
contexts this may potentially be exploitable for remote code execution.
Applications that process PKCS#7 or S/MIME signed messages using OpenSSL
PKCS#7 APIs may be affected. Applications using the CMS APIs for this
processing are not affected.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| A use-after-free vulnerability was found in libxml2. This issue occurs when parsing XPath elements under certain circumstances when the XML schematron has the <sch:name path="..."/> schema elements. This flaw allows a malicious actor to craft a malicious XML document used as input for libxml, resulting in the program's crash using libxml or other possible undefined behaviors. |
| Internally found bugs present in Firefox 153. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 154 and Thunderbird 154. |
| PDFio before 1.6.5 contains a dangling pointer vulnerability in the dictionary string-formatting function that stores a pointer to a stack-local buffer in the document dictionary without copying the string value. In multi-threaded or pooled-request environments, attackers or concurrent users can trigger stack memory reuse across requests, causing cross-tenant document content corruption by silently overwriting one caller's dictionary string values with another caller's data. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix UAF in pair command cancellation
The pairing completion and authentication failure callbacks look up the
pending MGMT_OP_PAIR_DEVICE command by walking hdev->mgmt_pending. The
lookup returned a command that was still linked on the shared pending list,
without keeping mgmt_pending_lock held for the later dereference and
removal.
A concurrent MGMT_OP_CANCEL_PAIR_DEVICE request can remove and free the
same pending command before the callback uses it. The reverse race is also
possible when cancel_pair_device() gets a command from pending_find() and a
callback removes it before the cancel path dereferences it. This can lead
to a use-after-free and a second list_del().
Make the pairing lookup helpers transfer ownership of the pending command
by removing it from hdev->mgmt_pending while holding mgmt_pending_lock.
The callbacks and cancel path then complete the command and free it
directly, so racing paths cannot find or free the same command again. Take
a temporary hci_conn reference in cancel_pair_device() because the command
completion drops the reference stored in the pending command. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Fix advertising data UAFs
hci_find_adv_instance() returns an adv_info pointer that is valid only
while hdev->lock is held. The advertising command-sync paths perform
instance lookups without that lock and, in some cases, retain the pointer
while waiting for a controller response.
An advertising termination event can therefore interleave as follows:
hci_cmd_sync_work hci_rx_work
hci_find_adv_instance()
__hci_cmd_sync_status()
wait for controller reply hci_dev_lock()
hci_remove_adv_instance()
kfree(adv)
adv->scan_rsp_changed = false
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
Write of size 1 at addr ffff88810a45d21d by task kworker/u17:0/88
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
hci_schedule_adv_instance_sync+0x390/0x4c0
hci_cmd_sync_work+0x173/0x300
Allocated by task 87:
hci_add_adv_instance+0x538/0xac0
add_advertising+0x885/0x1160
Freed by task 89:
kfree+0x131/0x3c0
hci_remove_adv_instance+0x1d8/0x3b0
hci_le_ext_adv_term_evt+0x17b/0x730
Protect the instance lookup and payload construction in the extended
advertising, scan response, and periodic advertising data paths. Snapshot
the advertising parameters under hdev->lock, but release the lock before
waiting for the controller.
Clear advertising-data dirty bits before issuing their commands and
restore them after a failure using a fresh lookup. Likewise, update the
reported transmit power through a fresh lookup after the parameter command
completes. No adv_info pointer then survives an HCI command wait. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: fix pptable use-after-free
amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
A concurrent pp_table write can replace and free the allocation during the
copy, causing a use-after-free.
Change the DPM interface to copy into caller-provided storage while the mutex
is held. Keep the size-only query for attribute discovery without exposing
the driver-owned pointer.
(cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: Fix race condition and ordering in port unregistration
A synchronization issue exists during port unregistration where pending
partner work items can race against workqueue destruction, leading to
use-after-free conditions:
cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__queue_work+0x83/0x4a0
Call Trace:
<IRQ>
__cfi_delayed_work_timer_fn+0x10/0x10
run_timer_softirq+0x3b6/0xbd0
sched_clock_cpu+0xc/0x110
irq_exit_rcu+0x18d/0x330
fred_sysvec_apic_timer_interrupt+0x5e/0x80
Fix this by ensuring strict ordering and proper serialization during
teardown:
1. Move ucsi_unregister_partner() to the beginning of the teardown
sequence and protect it under the connector mutex lock.
2. Ensure all pending partner tasks are explicitly flushed and finished
before the workqueue is destroyed.
3. Switch from mod_delayed_work() to a cancel_delayed_work() and
queue_delayed_work() sequence. This guarantees that items currently marked
as pending won't be scheduled an additional time, preventing a double
release of resources which leads to the following crash:
Oops: general protection fault, probably for non-canonical address
0xdead000000000122: 0000 [#1] SMP NOPTI
Workqueue: cros_ec_ucsi.3.auto-con2 ucsi_poll_worker
RIP: 0010:ucsi_poll_worker+0x65/0x1e0
Call Trace:
<TASK>
process_scheduled_works+0x218/0x6d0
worker_thread+0x188/0x3f0
__cfi_worker_thread+0x10/0x10
kthread+0x226/0x2a0
To ensure these rules are applied identically across both the normal
teardown and the ucsi_init() error paths, consolidate the cleanup logic
into a new helper, ucsi_unregister_port(). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: serialize kernel accept preallocation with socket teardown
rxrpc_kernel_charge_accept() reads rx->backlog without any
socket/backlog synchronization and passes that raw pointer into
rxrpc_service_prealloc_one(). A concurrent rxrpc_discard_prealloc()
sets rx->backlog = NULL and frees the backlog rings, so a kernel
preallocation worker can keep using a freed struct rxrpc_backlog
while updating *_backlog_head/tail and array slots.
Serialize the state check and backlog lookup with the socket lock,
and reject kernel preallocation once teardown has disabled
listening or discarded the service backlog. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: restrict socket queue dumps in enqueue tracepoints
tipc_sk_enqueue() runs with sk->sk_lock.slock held while the socket is
owned by user context. The spinlock protects the backlog queue in this
path, but it does not serialize against the socket owner consuming or
purging sk_receive_queue.
KASAN reported:
CPU: 14 UID: 0 PID: 1050 Comm: tipc3 Not tainted 7.1.0-rc6+ #126 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0 lib/dump_stack.c:123
print_report+0xce/0x5b0 mm/kasan/report.c:482
kasan_report+0xc6/0x100 mm/kasan/report.c:597
__asan_report_load4_noabort+0x14/0x30 mm/kasan/report_generic.c:380
tipc_skb_dump+0x1327/0x16f0 net/tipc/trace.c:73
tipc_list_dump+0x208/0x2e0 net/tipc/trace.c:187
tipc_sk_dump+0xaf6/0xd60 net/tipc/socket.c:3996
trace_event_raw_event_tipc_sk_class+0x312/0x5a0 net/tipc/trace.h:188
tipc_sk_rcv+0xb1d/0x1d50 net/tipc/socket.c:2497
tipc_node_xmit+0x1c3/0x1440 net/tipc/node.c:1689
__tipc_sendmsg+0x97a/0x1440 net/tipc/socket.c:1512
tipc_sendmsg+0x52/0x80 net/tipc/socket.c:1400
sock_sendmsg+0x2f6/0x3e0 net/socket.c:825
splice_to_socket+0x7f9/0x1010 fs/splice.c:884
do_splice+0xe21/0x2330 fs/splice.c:936
__do_splice+0x153/0x260 fs/splice.c:1431
__x64_sys_splice+0x150/0x230 fs/splice.c:1616
x64_sys_call+0xeb5/0x2790 arch/x86/entry/syscall_64.c:41
do_syscall_64+0xf3/0x620 arch/x86/entry/syscall_64.c:63
entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:130
RIP: 0033:0x71624e8aafe2
Code: 08 0f 85 71 3a ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66
RSP: 002b:0000716157ffed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000113
RAX: ffffffffffffffda RBX: 0000716157fff6c0 RCX: 000071624e8aafe2
RDX: 000000000000005f RSI: 0000000000000000 RDI: 0000000000000066
RBP: 0000716157ffed90 R08: 0000000000008000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffff00
R13: 0000000000000021 R14: 0000000000000000 R15: 00007fff89799c40
</TASK>
The TIPC_DUMP_ALL tracepoints in tipc_sk_enqueue() also dump
sk_receive_queue and can therefore dereference skbs that the socket
owner has already dequeued or freed. Restrict these dumps to
TIPC_DUMP_SK_BKLGQ, which matches the queue protected by the held
spinlock.
Keep the change limited to the enqueue path, where the unsafe queue dump
is reachable while the socket is owned by user context. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf,fork: wipe ->bpf_storage before bailouts that access it
Currently, copy_process() can bail out to free_task() before p->bpf_storage
has been initialized, with this call graph (shown here for the
!CONFIG_MEMCG case):
copy_process
dup_task_struct
arch_dup_task_struct
[copies the entire task_struct, including ->bpf_storage member]
[RLIMIT_NPROC check fails]
delayed_free_task
free_task
bpf_task_storage_free
rcu_dereference(task->bpf_storage)
bpf_local_storage_destroy
In this case, the nascent task's ->bpf_storage member that
bpf_local_storage_destroy() operates on is a plain copy of the parent's
->bpf_storage pointer, not a real initialized pointer.
This leads to badness (kernel hangs, UAF).
This is reachable as long as the process calling fork() has been inserted
into a task storage map. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas_tf: fix use-after-free in lbtf_free_adapter()
lbtf_free_adapter() calls timer_delete(&priv->command_timer), which does
not wait for a running command_timer_fn() callback. lbtf_free_adapter()
runs on the teardown path right before ieee80211_free_hw() frees priv,
both in lbtf_remove_card() and in the probe error path. command_timer is
armed by mod_timer() in lbtf_cmd() whenever a firmware command is sent.
command_timer_fn() dereferences priv. If a command times out as the
device is removed, command_timer_fn() runs concurrently with teardown and
dereferences priv after it has been freed.
This is the same use-after-free that commit 03cc8f90d053 ("wifi: libertas:
fix use-after-free in lbs_free_adapter()") fixed in the sibling libertas
driver. The libertas_tf variant has the identical pattern and was left
unchanged. Use timer_delete_sync() so any in-flight callback completes
before priv is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
locking/rt: Fix the incorrect RCU protection in rt_spin_unlock()
rt_spin_unlock() releases the RCU protection before unlocking the
lock. That opens the door for the following UAF scenario:
T1 T2
spin_lock(&p->lock); rcu_read_lock();
invalidate(p); p = rcu_dereference(ptr);
rcu_assign_pointer(ptr, NULL); if (!p) return;
spin_unlock(&p->lock); spin_lock(&p->lock)
lock(&lock->lock);
rcu_read_lock();
kfree_rcu(p); rcu_read_unlock();
....
spin_unlock(&p->lock)
rcu_read_unlock(); // Ends grace period
rcu_do_batch()
kfree(p);
UAF -> rt_mutex_cmpxchg_release(&lock->lock...)
Regular spinlocks keep preemption disabled accross the unlock operation,
which provides full RCU protection, but the RT substitution fails to
resemble that. Same applies for the rwlock substitution.
Move the rcu_read_unlock() invocation past the unlock operations to match
the non-RT semantics. This makes it asymmetric vs. rt_xxx_lock(), but
that's harmless as the caller needs to hold RCU read lock across the lock
operation. The migrate_enable() call stays before the unlock operation
because there is no per CPU operation in the unlock path which would
require migration to be kept disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Call synchronize_rcu() when unregistering
This ensures that any RCU readers traversing the instance list
have finished, before releasing the reference on the tracer that
the instance points to. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: close a re-opened queue timer in the destructor
queue_delete() closes the queue timer, then frees it. snd_seq_timer_close()
clears q->timer->timeri. snd_use_lock_sync() then drains borrowers, and
snd_seq_timer_delete() frees q->timer.
A borrower can re-open the timer inside that window. A SET_QUEUE_CLIENT
that took a queueptr() use_lock reference before the queue was unlinked
runs snd_seq_timer_open() after the close. Open refuses re-open only while
timeri is set, and the close just cleared it, so it re-opens timeri.
snd_seq_timer_delete() does not close that instance. Its snd_seq_timer_stop()
is a no-op, because running was cleared first. So it frees q->timer with the
instance still live. The queue is freed next.
The instance stays on the global timer with callback_data pointing at the
freed queue. A non-owner START on the unlocked queue arms it. The next tick
derefs the freed queue in snd_seq_timer_interrupt().
Reachable by an unprivileged user with access to /dev/snd/seq. No CAP and
no queue ownership required.
Close any lingering instance in the destructor. There, ->timeri can no
longer change: the queue is unlinked and all use_lock borrowers have
drained, so no snd_seq_queue_use() can re-open it. Close it before clearing
q->timer. snd_timer_close() waits for any in-flight snd_seq_timer_interrupt()
to finish, and that callback still reads q->timer (via snd_seq_check_queue()),
so q->timer must stay valid until it drains. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: fix use-after-free in aggr_reset_state()
The aggr_reset_state() function uses timer_delete() (non-synchronous)
for the aggregation timer before proceeding to delete TID state and
before the structure is freed by callers like aggr_module_destroy().
If the timer callback (aggr_timeout) is executing when aggr_reset_state()
is called, the callback will continue to access aggr_conn fields like
rx_tid[] and stat[] which may be freed immediately after by
kfree(aggr_info->aggr_conn) in aggr_module_destroy().
Additionally, the timer callback can re-arm itself via mod_timer() while
aggr_reset_state() is running, creating a more complex race condition.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: avoid auth_enable sysctl UAF during netns teardown
proc_sctp_do_auth() updates the SCTP control socket after changing
net.sctp.auth_enable. The handler gets the per-net SCTP state from
ctl->data, so an already opened sysctl file can still target a network
namespace while that namespace is being torn down.
SCTP previously registered its per-net sysctls from sctp_defaults_init(),
while the control socket is created later from sctp_ctrlsock_init(). This
exposed a window during initialization where auth_enable was writable
before net->sctp.ctl_sock existed, and a teardown window where auth_enable
stayed writable after inet_ctl_sock_destroy() had released the control
socket.
Move the per-net SCTP sysctl registration into sctp_ctrlsock_init() after
sctp_ctl_sock_init() succeeds, and unregister the sysctl table before
destroying the control socket in sctp_ctrlsock_exit(). If sysctl
registration fails after the control socket was created, destroy the
control socket in the same init path.
Make sctp_sysctl_net_unregister() tolerate a missing header and clear the
saved pointer so init-error and exit paths can safely share the unregister
helper. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: ipheth: fix carrier_work UAF on disconnect
ipheth_sndbulk_callback() re-arms the carrier-check work on any
non-zero URB status:
else
schedule_delayed_work(&dev->carrier_work, 0);
Nothing ties that to the interface being up, so the work can be armed
again after ipheth_close() has already drained it, and stay armed
until the netdev whose private area embeds it is freed.
On unplug with a TX URB in flight, ipheth_disconnect() drains the work
through unregister_netdev() -> ipheth_close() ->
cancel_delayed_work_sync() and only then calls ipheth_kill_urbs().
usb_kill_urb() completes the in-flight TX URB with -ENOENT, so
ipheth_sndbulk_callback() runs after the drain and re-arms
carrier_work.
The same completion also re-arms the work if the interface is only
brought down while a TX URB is in flight, and
ipheth_carrier_check_work() then keeps re-queueing itself once a
second. unregister_netdev() does not call ipheth_close() for an
already-down interface, so nothing drains it on the later unplug
either.
In both cases free_netdev() frees the netdev while carrier_work is
still pending, and ipheth_carrier_check_work() dereferences freed
memory.
Tie the work to the interface state instead of chasing the completion:
disable it in ipheth_close() and enable it in ipheth_open(), so a
schedule_delayed_work() from the URB completion is a no-op whenever
the interface is not up. disable_delayed_work_sync() also waits for a
running instance, so it fully replaces the cancel_delayed_work_sync()
it takes the place of. The work starts out disabled in ipheth_probe()
so the enable/disable counts balance from the first open.
Reproduced under KASAN on linux-next (next-20260731) with dummy_hcd and
raw-gadget standing in for the device, driving the second path above (the
interface is already down, so unregister_netdev() does not call
ipheth_close()): 15 of 15 unpatched boots report a slab-use-after-free in
__run_timers(), freed by ipheth_disconnect() and re-armed from
ipheth_sndbulk_callback() via queue_delayed_work_on(). The
same trigger on a kernel differing only by this patch reports 0 of 15,
and the carrier check still functions across open/close cycles.
The reproducer needs an attached USB device that stops draining bulk OUT,
plus a link down and unplug, driven as root. It is not a privilege
boundary crossing and no exploit primitive was developed.
Found by 0sec (https://0sec.ai). |
