| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix device leak on probe failure
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
This driver takes a reference to the USB device during probe but does
not to release it on all probe errors (e.g. when descriptor parsing
fails).
Drop the redundant device reference to fix the leak, reduce cargo
culting, make it easier to spot drivers where an extra reference is
needed, and reduce the risk of further memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix leak of kobject name for sub-group space_info
When create_space_info_sub_group() allocates elements of
space_info->sub_group[], kobject_init_and_add() is called for each
element via btrfs_sysfs_add_space_info_type(). However, when
check_removing_space_info() frees these elements, it does not call
btrfs_sysfs_remove_space_info() on them. As a result, kobject_put() is
not called and the associated kobj->name objects are leaked.
This memory leak is reproduced by running the blktests test case
zbd/009 on kernels built with CONFIG_DEBUG_KMEMLEAK. The kmemleak
feature reports the following error:
unreferenced object 0xffff888112877d40 (size 16):
comm "mount", pid 1244, jiffies 4294996972
hex dump (first 16 bytes):
64 61 74 61 2d 72 65 6c 6f 63 00 c4 c6 a7 cb 7f data-reloc......
backtrace (crc 53ffde4d):
__kmalloc_node_track_caller_noprof+0x619/0x870
kstrdup+0x42/0xc0
kobject_set_name_vargs+0x44/0x110
kobject_init_and_add+0xcf/0x150
btrfs_sysfs_add_space_info_type+0xfc/0x210 [btrfs]
create_space_info_sub_group.constprop.0+0xfb/0x1b0 [btrfs]
create_space_info+0x211/0x320 [btrfs]
btrfs_init_space_info+0x15a/0x1b0 [btrfs]
open_ctree+0x33c7/0x4a50 [btrfs]
btrfs_get_tree.cold+0x9f/0x1ee [btrfs]
vfs_get_tree+0x87/0x2f0
vfs_cmd_create+0xbd/0x280
__do_sys_fsconfig+0x3df/0x990
do_syscall_64+0x136/0x1540
entry_SYSCALL_64_after_hwframe+0x76/0x7e
To avoid the leak, call btrfs_sysfs_remove_space_info() instead of
kfree() for the elements. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: fix nfeeds state corruption on start_streaming failure
syzbot reported a memory leak in vidtv_psi_service_desc_init [1].
When vidtv_start_streaming() fails inside vidtv_start_feed(), the
nfeeds counter is left incremented even though no feed was actually
started. This corrupts the driver state: subsequent start_feed calls
see nfeeds > 1 and skip starting the mux, while stop_feed calls
eventually try to stop a non-existent stream.
This state corruption can also lead to memory leaks, since the mux
and channel resources may be partially allocated during a failed
start_streaming but never cleaned up, as the stop path finds
dvb->streaming == false and returns early.
Fix by decrementing nfeeds back when start_streaming fails, keeping
the counter in sync with the actual number of active feeds.
[1]
BUG: memory leak
unreferenced object 0xffff888145b50820 (size 32):
comm "syz.0.17", pid 6068, jiffies 4294944486
backtrace (crc 90a0c7d4):
vidtv_psi_service_desc_init+0x74/0x1b0 drivers/media/test-drivers/vidtv/vidtv_psi.c:288
vidtv_channel_s302m_init+0xb1/0x2a0 drivers/media/test-drivers/vidtv/vidtv_channel.c:83
vidtv_channels_init+0x1b/0x40 drivers/media/test-drivers/vidtv/vidtv_channel.c:524
vidtv_mux_init+0x516/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:518
vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 [inline]
vidtv_start_feed+0x33e/0x4d0 drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer
smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores
the pointer in pipe_buffer.private. The pipe_buf_operations for these
buffers used .get = generic_pipe_buf_get, which only increments the page
reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv
pointer itself was not handled, so after tee() both the original and the
cloned pipe_buffer share the same smc_spd_priv *.
When both pipes are subsequently released, smc_rx_pipe_buf_release() is
called twice against the same object:
1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct]
2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF]
KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which
then escalates to a NULL-pointer dereference and kernel panic via
smc_rx_update_consumer() when it chases the freed priv->smc pointer:
BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0
Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xce/0x650
kasan_report+0xc6/0x100
smc_rx_pipe_buf_release+0x78/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:smc_rx_update_consumer+0x8d/0x350
Call Trace:
<TASK>
smc_rx_pipe_buf_release+0x121/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Kernel panic - not syncing: Fatal exception
Beyond the memory-safety problem, duplicating an SMC splice buffer is
semantically questionable: smc_rx_update_cons() would advance the
consumer cursor twice for the same data, corrupting receive-window
accounting. A refcount on smc_spd_priv could fix the double-free, but
the cursor-accounting issue would still need to be addressed separately.
The .get callback is invoked by both tee(2) and splice_pipe_to_pipe()
for partial transfers; both will now return -EFAULT. Users who need
to duplicate SMC socket data must use a copy-based read path. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: add missing return after LLCP_CLOSED checks
In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket
state is LLCP_CLOSED, the code correctly calls release_sock() and
nfc_llcp_sock_put() but fails to return. Execution falls through to
the remainder of the function, which calls release_sock() and
nfc_llcp_sock_put() again. This results in a double release_sock()
and a refcount underflow via double nfc_llcp_sock_put(), leading to
a use-after-free.
Add the missing return statements after the LLCP_CLOSED branches
in both functions to prevent the fall-through. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix deadlock during netdev reset with active connections
Resolve deadlock that occurs when user executes netdev reset while RDMA
applications (e.g., rping) are active. The netdev reset causes ice
driver to remove irdma auxiliary driver, triggering device_delete and
subsequent client removal. During client removal, uverbs_client waits
for QP reference count to reach zero while cma_client holds the final
reference, creating circular dependency and indefinite wait in iWARP
mode. Skip QP reference count wait during device reset to prevent
deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix reference count leak in rxrpc_server_keyring()
This patch fixes a reference count leak in rxrpc_server_keyring()
by checking if rx->securities is already set. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Only put the call ref if one was acquired
rxrpc_input_packet_on_conn() can process a to-client packet after the
current client call on the channel has already been torn down. In that
case chan->call is NULL, rxrpc_try_get_call() returns NULL and there is
no reference to drop.
The client-side implicit-end error path does not account for that and
unconditionally calls rxrpc_put_call(). This turns a protocol error
path into a kernel crash instead of rejecting the packet.
Only drop the call reference if one was actually acquired. Keep the
existing protocol error handling unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix key reference count leak from call->key
When creating a client call in rxrpc_alloc_client_call(), the code obtains
a reference to the key. This is never cleaned up and gets leaked when the
call is destroyed.
Fix this by freeing call->key in rxrpc_destroy_call().
Before the patch, it shows the key reference counter elevated:
$ cat /proc/keys | grep afs@54321
1bffe9cd I--Q--i 8053480 4169w 3b010000 1000 1000 rxrpc afs@54321: ka
$
After the patch, the invalidated key is removed when the code exits:
$ cat /proc/keys | grep afs@54321
$ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: fix refcount underflow in intel_engine_park_heartbeat
A use-after-free / refcount underflow is possible when the heartbeat
worker and intel_engine_park_heartbeat() race to release the same
engine->heartbeat.systole request.
The heartbeat worker reads engine->heartbeat.systole and calls
i915_request_put() on it when the request is complete, but clears
the pointer in a separate, non-atomic step. Concurrently, a request
retirement on another CPU can drop the engine wakeref to zero, triggering
__engine_park() -> intel_engine_park_heartbeat(). If the heartbeat
timer is pending at that point, cancel_delayed_work() returns true and
intel_engine_park_heartbeat() reads the stale non-NULL systole pointer
and calls i915_request_put() on it again, causing a refcount underflow:
```
<4> [487.221889] Workqueue: i915-unordered engine_retire [i915]
<4> [487.222640] RIP: 0010:refcount_warn_saturate+0x68/0xb0
...
<4> [487.222707] Call Trace:
<4> [487.222711] <TASK>
<4> [487.222716] intel_engine_park_heartbeat.part.0+0x6f/0x80 [i915]
<4> [487.223115] intel_engine_park_heartbeat+0x25/0x40 [i915]
<4> [487.223566] __engine_park+0xb9/0x650 [i915]
<4> [487.223973] ____intel_wakeref_put_last+0x2e/0xb0 [i915]
<4> [487.224408] __intel_wakeref_put_last+0x72/0x90 [i915]
<4> [487.224797] intel_context_exit_engine+0x7c/0x80 [i915]
<4> [487.225238] intel_context_exit+0xf1/0x1b0 [i915]
<4> [487.225695] i915_request_retire.part.0+0x1b9/0x530 [i915]
<4> [487.226178] i915_request_retire+0x1c/0x40 [i915]
<4> [487.226625] engine_retire+0x122/0x180 [i915]
<4> [487.227037] process_one_work+0x239/0x760
<4> [487.227060] worker_thread+0x200/0x3f0
<4> [487.227068] ? __pfx_worker_thread+0x10/0x10
<4> [487.227075] kthread+0x10d/0x150
<4> [487.227083] ? __pfx_kthread+0x10/0x10
<4> [487.227092] ret_from_fork+0x3d4/0x480
<4> [487.227099] ? __pfx_kthread+0x10/0x10
<4> [487.227107] ret_from_fork_asm+0x1a/0x30
<4> [487.227141] </TASK>
```
Fix this by replacing the non-atomic pointer read + separate clear with
xchg() in both racing paths. xchg() is a single indivisible hardware
instruction that atomically reads the old pointer and writes NULL. This
guarantees only one of the two concurrent callers obtains the non-NULL
pointer and performs the put, the other gets NULL and skips it.
(cherry picked from commit 13238dc0ee4f9ab8dafa2cca7295736191ae2f42) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix missing runtime PM reference in ccs_mode_store
ccs_mode_store() calls xe_gt_reset() which internally invokes
xe_pm_runtime_get_noresume(). That function requires the caller
to already hold an outer runtime PM reference and warns if none
is held:
[46.891177] xe 0000:03:00.0: [drm] Missing outer runtime PM protection
[46.891178] WARNING: drivers/gpu/drm/xe/xe_pm.c:885 at
xe_pm_runtime_get_noresume+0x8b/0xc0
Fix this by protecting xe_gt_reset() with the scope-based
guard(xe_pm_runtime)(xe), which is the preferred form when
the reference lifetime matches a single scope.
v2:
- Use scope-based guard(xe_pm_runtime)(xe) (Shuicheng)
- Update commit message accordingly
(cherry picked from commit 7937ea733f79b3f25e802a0c8360bf7423856f36) |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix use-after-free on disconnect
The vub300 driver maintains an explicit reference count for the
controller and its driver data and the last reference can in theory be
dropped after the driver has been unbound.
This specifically means that the controller allocation must not be
device managed as that can lead to use-after-free.
Note that the lifetime is currently also incorrectly tied the parent USB
device rather than interface, which can lead to memory leaks if the
driver is unbound without its device being physically disconnected (e.g.
on probe deferral).
Fix both issues by reverting to non-managed allocation of the controller. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rt2x00usb: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the USB anchor lifetime so that it is released on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SCO: Fix use-after-free in sco_recv_frame() due to missing sock_hold
sco_recv_frame() reads conn->sk under sco_conn_lock() but immediately
releases the lock without holding a reference to the socket. A concurrent
close() can free the socket between the lock release and the subsequent
sk->sk_state access, resulting in a use-after-free.
Other functions in the same file (sco_sock_timeout(), sco_conn_del())
correctly use sco_sock_hold() to safely hold a reference under the lock.
Fix by using sco_sock_hold() to take a reference before releasing the
lock, and adding sock_put() on all exit paths. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: Fix possible UAF
This fixes the following trace caused by not dropping l2cap_conn
reference when user->remove callback is called:
[ 97.809249] l2cap_conn_free: freeing conn ffff88810a171c00
[ 97.809907] CPU: 1 UID: 0 PID: 1419 Comm: repro_standalon Not tainted 7.0.0-rc1-dirty #14 PREEMPT(lazy)
[ 97.809935] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 97.809947] Call Trace:
[ 97.809954] <TASK>
[ 97.809961] dump_stack_lvl (lib/dump_stack.c:122)
[ 97.809990] l2cap_conn_free (net/bluetooth/l2cap_core.c:1808)
[ 97.810017] l2cap_conn_del (./include/linux/kref.h:66 net/bluetooth/l2cap_core.c:1821 net/bluetooth/l2cap_core.c:1798)
[ 97.810055] l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7347 (discriminator 1) net/bluetooth/l2cap_core.c:7340 (discriminator 1))
[ 97.810086] ? __pfx_l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7341)
[ 97.810117] hci_conn_hash_flush (./include/net/bluetooth/hci_core.h:2152 (discriminator 2) net/bluetooth/hci_conn.c:2644 (discriminator 2))
[ 97.810148] hci_dev_close_sync (net/bluetooth/hci_sync.c:5360)
[ 97.810180] ? __pfx_hci_dev_close_sync (net/bluetooth/hci_sync.c:5285)
[ 97.810212] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810242] ? up_write (./arch/x86/include/asm/atomic64_64.h:87 (discriminator 5) ./include/linux/atomic/atomic-arch-fallback.h:2852 (discriminator 5) ./include/linux/atomic/atomic-long.h:268 (discriminator 5) ./include/linux/atomic/atomic-instrumented.h:3391 (discriminator 5) kernel/locking/rwsem.c:1385 (discriminator 5) kernel/locking/rwsem.c:1643 (discriminator 5))
[ 97.810267] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810290] ? rcu_is_watching (./arch/x86/include/asm/atomic.h:23 ./include/linux/atomic/atomic-arch-fallback.h:457 ./include/linux/context_tracking.h:128 kernel/rcu/tree.c:752)
[ 97.810320] hci_unregister_dev (net/bluetooth/hci_core.c:504 net/bluetooth/hci_core.c:2716)
[ 97.810346] vhci_release (drivers/bluetooth/hci_vhci.c:691)
[ 97.810375] ? __pfx_vhci_release (drivers/bluetooth/hci_vhci.c:678)
[ 97.810404] __fput (fs/file_table.c:470)
[ 97.810430] task_work_run (kernel/task_work.c:235)
[ 97.810451] ? __pfx_task_work_run (kernel/task_work.c:201)
[ 97.810472] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810495] ? do_raw_spin_unlock (./include/asm-generic/qspinlock.h:128 (discriminator 5) kernel/locking/spinlock_debug.c:142 (discriminator 5))
[ 97.810527] do_exit (kernel/exit.c:972)
[ 97.810547] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810574] ? __pfx_do_exit (kernel/exit.c:897)
[ 97.810594] ? lock_acquire (kernel/locking/lockdep.c:470 (discriminator 6) kernel/locking/lockdep.c:5870 (discriminator 6) kernel/locking/lockdep.c:5825 (discriminator 6))
[ 97.810616] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810639] ? do_raw_spin_lock (kernel/locking/spinlock_debug.c:95 (discriminator 4) kernel/locking/spinlock_debug.c:118 (discriminator 4))
[ 97.810664] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810688] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1))
[ 97.810721] do_group_exit (kernel/exit.c:1093)
[ 97.810745] get_signal (kernel/signal.c:3007 (discriminator 1))
[ 97.810772] ? security_file_permission (./arch/x86/include/asm/jump_label.h:37 security/security.c:2366)
[ 97.810803] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810826] ? vfs_read (fs/read_write.c:555)
[ 97.810854] ? __pfx_get_signal (kernel/signal.c:2800)
[ 97.810880] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810905] ? __pfx_vfs_read (fs/read_write.c:555)
[ 97.810932] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810960] arch_do_signal_or_restart (arch/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: fix use-after-free in ctnetlink_dump_exp_ct()
ctnetlink_dump_exp_ct() stores a conntrack pointer in cb->data for the
netlink dump callback ctnetlink_exp_ct_dump_table(), but drops the
conntrack reference immediately after netlink_dump_start(). When the
dump spans multiple rounds, the second recvmsg() triggers the dump
callback which dereferences the now-freed conntrack via nfct_help(ct),
leading to a use-after-free on ct->ext.
The bug is that the netlink_dump_control has no .start or .done
callbacks to manage the conntrack reference across dump rounds. Other
dump functions in the same file (e.g. ctnetlink_get_conntrack) properly
use .start/.done callbacks for this purpose.
Fix this by adding .start and .done callbacks that hold and release the
conntrack reference for the duration of the dump, and move the
nfct_help() call after the cb->args[0] early-return check in the dump
callback to avoid dereferencing ct->ext unnecessarily.
BUG: KASAN: slab-use-after-free in ctnetlink_exp_ct_dump_table+0x4f/0x2e0
Read of size 8 at addr ffff88810597ebf0 by task ctnetlink_poc/133
CPU: 1 UID: 0 PID: 133 Comm: ctnetlink_poc Not tainted 7.0.0-rc2+ #3 PREEMPTLAZY
Call Trace:
<TASK>
ctnetlink_exp_ct_dump_table+0x4f/0x2e0
netlink_dump+0x333/0x880
netlink_recvmsg+0x3e2/0x4b0
? aa_sk_perm+0x184/0x450
sock_recvmsg+0xde/0xf0
Allocated by task 133:
kmem_cache_alloc_noprof+0x134/0x440
__nf_conntrack_alloc+0xa8/0x2b0
ctnetlink_create_conntrack+0xa1/0x900
ctnetlink_new_conntrack+0x3cf/0x7d0
nfnetlink_rcv_msg+0x48e/0x510
netlink_rcv_skb+0xc9/0x1f0
nfnetlink_rcv+0xdb/0x220
netlink_unicast+0x3ec/0x590
netlink_sendmsg+0x397/0x690
__sys_sendmsg+0xf4/0x180
Freed by task 0:
slab_free_after_rcu_debug+0xad/0x1e0
rcu_core+0x5c3/0x9c0 |
| In the Linux kernel, the following vulnerability has been resolved:
tls: Purge async_hold in tls_decrypt_async_wait()
The async_hold queue pins encrypted input skbs while
the AEAD engine references their scatterlist data. Once
tls_decrypt_async_wait() returns, every AEAD operation
has completed and the engine no longer references those
skbs, so they can be freed unconditionally.
A subsequent patch adds batch async decryption to
tls_sw_read_sock(), introducing a new call site that
must drain pending AEAD operations and release held
skbs. Move __skb_queue_purge(&ctx->async_hold) into
tls_decrypt_async_wait() so the purge is centralized
and every caller -- recvmsg's drain path, the -EBUSY
fallback in tls_do_decryption(), and the new read_sock
batch path -- releases held skbs on synchronization
without each site managing the purge independently.
This fixes a leak when tls_strp_msg_hold() fails part-way through,
after having added some cloned skbs to the async_hold
queue. tls_decrypt_sg() will then call tls_decrypt_async_wait() to
process all pending decrypts, and drop back to synchronous mode, but
tls_sw_recvmsg() only flushes the async_hold queue when one record has
been processed in "fully-async" mode, which may not be the case here.
[pabeni@redhat.com: added leak comment] |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix preempt count leak in napi poll tracepoint
Using get_cpu() in the tracepoint assignment causes an obvious preempt
count leak because nothing invokes put_cpu() to undo it:
softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101?
This clearly has seen a lot of testing in the last 3+ years...
Use smp_processor_id() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_CT: drop pending enqueued packets on template removal
Templates refer to objects that can go away while packets are sitting in
nfqueue refer to:
- helper, this can be an issue on module removal.
- timeout policy, nfnetlink_cttimeout might remove it.
The use of templates with zone and event cache filter are safe, since
this just copies values.
Flush these enqueued packets in case the template rule gets removed. |
