Export limit exceeded: 395615 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395615 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93141 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: r8a66597: avoid double free of ep0_req in probe error path If usb_add_gadget_udc() fails, r8a66597_probe() jumps to err_add_udc and frees ep0_req, then falls through to clean_up2 where ep0_req is freed again when it is non-NULL. Remove the redundant free from err_add_udc and keep the cleanup in clean_up2 so the request is released exactly once. Issue found using a prototype static analysis tool and confirmed by code review. | ||||
| CVE-2026-93143 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: media: ipu7: fix pm_runtime refcount leak in ipu7_resume() ipu7_resume() calls pm_runtime_get_sync() before resuming the device. If the runtime PM resume fails, the usage count remains incremented, but the error path returns without dropping the reference. Use pm_runtime_resume_and_get() instead, which balances the usage count on failure and avoids the leak. Keep returning 0 on error, as resume callbacks should not propagate failures to the PM core, matching the behaviour of the ipu6 driver. | ||||
| CVE-2026-93145 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister() gdsc_unregister() removes the OF provider entry and tears down the parent/subdomain wiring, but never calls pm_genpd_remove() on the individual generic_pm_domain structures registered by gdsc_init(): void gdsc_unregister(struct gdsc_desc *desc) { struct device *dev = desc->dev; size_t num = desc->num; gdsc_pm_subdomain_remove(desc, num); of_genpd_del_provider(dev->of_node); } That leaves dangling entries on the global gpd_list. After a provider unbind/rebind cycle (deferred-probe replay during early boot, real module unload of a clk driver that owns GDSCs, or an OF-overlay tear- down) the next gdsc_init() will end up trying to re-register a name that is still in the list and pm_genpd_init() returns -EEXIST. While we are here, flip the order so the consumer-facing OF provider entry is the first thing removed -- otherwise a fresh of_genpd_get_from_provider() call racing with the teardown could attach to a domain that is mid-removal. Iterate the scs[] array and pm_genpd_remove() each registered domain after the subdomain links are torn down. The regulators stay devm- managed (devm_regulator_get_optional() in gdsc_register()), so the release happens automatically when the underlying device is unbound; just the genpd accounting needs to be undone explicitly. | ||||
| CVE-2026-93152 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-apple: Use acquire/release for queue enabled state apple_nvme_init_queue() initializes queue state and then marks the queue enabled. The interrupt and request paths check enabled before using that queue state. The old wmb() after WRITE_ONCE(enabled, true) does not publish the earlier initialization before enabled becomes visible. Use a release store when enabling the queue and acquire loads when testing it. Although the shutdown-side enabled accesses are not used for publishing queue initialization, use helpers for them as well for consistency. | ||||
| CVE-2026-93153 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bng_re: return a timeout when firmware responses stall __wait_for_resp() documents that it returns a non-zero error when a firmware command does not complete, and bng_re_rcfw_send_message() already marks the firmware as stalled when the helper returns -ENODEV. However, the helper ignores wait_event_timeout() expiry. If the response slot remains in use after the timeout and after the polled CREQ service attempt, the loop starts another full timeout period and can repeat forever. Return -ENODEV after a timed out wait that still has no response. The existing caller then marks FIRMWARE_STALL_DETECTED and returns -ETIMEDOUT to the command issuer. | ||||
| CVE-2026-93156 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: rk3288 - fail ahash requests on HASH idle timeout rk_hash_run() waits for RK_CRYPTO_HASH_STS to become idle after the final DMA transfer, but ignores the poll result. If the hash engine never becomes idle, the driver still reads the digest registers and finalizes the request with the previous success value. Store the poll result and finalize the request with the timeout error before reading the digest registers. | ||||
| CVE-2026-93157 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: xilinx-trng - propagate timeout before any data is read xtrng_readblock32() polls for 16-byte chunks but returns the number of bytes read even when the first poll times out. Its caller then treats a zero return as a short successful read, and partial reads for full 32-byte blocks can make the tail copy use a fixed block offset rather than the amount already produced. Return the poll error when no data has been read, preserve partial positive returns after some data is available, stop the generator on all collection exits, and append tail bytes at the current output count. | ||||
| CVE-2026-93158 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: sa2ul - stop probe if context pool creation fails sa_ul_probe() calls sa_init_mem() to create the DMA pool used for security context buffers, but ignores its return value. If pool creation fails, probe still continues with DMA setup, algorithm registration and child population even though later request setup depends on that pool. Stop probing when sa_init_mem() fails, and route that failure to the PM cleanup path without attempting to destroy an uncreated DMA pool. | ||||
| CVE-2026-93159 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - fix heap info leak on I2C transfer failure The nonblocking RNG path allocates a work_data structure to track the state of an in-flight asynchronous I2C request. This pointer is stored in rng->priv and later consumed by the read path once the transaction completes. If the underlying I2C transfer fails, the completion callback is invoked with a non-zero status. In this case, the allocated work_data is not usable for producing RNG output and must not remain associated with the hwrng state. Previously, the failure path only logged a warning but left the pointer state uncleared, which can result in subsequent read attempts observing stale state and interpreting it as valid completion data. Fix this by freeing the pending work_data. The I2C transaction reports an error. This ensures that failed requests do not leave residual state behind that could be interpreted as valid RNG data on later reads. Clearing rng->priv is done at the subsequent call to nonblocking read. | ||||
| CVE-2026-93160 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-ecc - reject hardware ECDH without a public key The hardware ECDH path in atmel_ecdh_compute_shared_secret() uses the private key stored in the device. However, the public key is cached only after atmel_ecdh_set_secret() successfully generated that private key for the current tfm. atmel_ecdh_generate_public_key() already rejects requests when no public key is cached. Add the same check to atmel_ecdh_compute_shared_secret() to prevent the device from using a private key that was not generated for the current tfm. | ||||
| CVE-2026-93161 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - clear AES key schedule from stack qat_alg_xts_reverse_key() expands the forward XTS AES key on the stack. That schedule contains key material and can remain in the stack frame. Clear the temporary crypto_aes_ctx with memzero_explicit() after the copy. | ||||
| CVE-2026-93162 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - cancel work on re-enable SR-IOV timeout The QAT reset worker queues SR-IOV reenable work using a work_struct and completion embedded in an on-stack adf_sriov_dev_data. If the completion wait times out, the reset worker can return while device_sriov_wq still holds or executes the stack-backed work item. Cancel the work on the device_sriov_wq on timeout before the stack frame unwinds. | ||||
| CVE-2026-93165 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/chrome: sensorhub: Fix memory overread in ring handler `max_response` and `sensor_num` are read from different EC commands: - `max_response` is from cros_ec_get_proto_info(). ec_dev->max_response = info->max_response_packet_size - sizeof(struct ec_host_response); - `sensor_num` is from cros_ec_get_sensor_count(). sensor_num = cros_ec_get_sensor_count(ec); With a malfunctioning EC firmware, it is possible that the `msg->insize` (i.e., `fifo_info_length` in the context) could be clamped in cros_ec_cmd_xfer() because `msg->insize` is greater than `max_response`. int fifo_info_length = sizeof(struct ec_response_motion_sense_fifo_info) + sizeof(u16) * sensorhub->sensor_num; This means the number of read bytes could be less than expected. As a result, the subsequent memcpy() in cros_ec_sensorhub_ring_handler() overreads the `resp->fifo_info` buffer. Check the return value of cros_ec_cmd_xfer_status() and abort if the number of bytes read does not match the expected length. | ||||
| CVE-2026-93166 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: debug: fix off by on in rtw89_ppdu_str() This > comparison should be >= to avoid an out of bounds access. | ||||
| CVE-2026-93168 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a condition that is never fulfilled, the CPU busy-waits for prolonged time and the timeout triggers only with a massive delay causing a CPU stall. This happens due to a huge underestimation of wall clock time in poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use timekeeping in read_poll_timeout_atomic()") changed the behavior to no longer use ktime_get at the expense of underestimation of wall clock time which appears to be very large for delay_us=0. Instead of timing out after approximately XILINX_DMA_LOOP_COUNT microseconds, the timeout takes XILINX_DMA_LOOP_COUNT * 1000 * (time that the overhead of the for loop in poll_timeout_us_atomic takes) which is in the range of several minutes for XILINX_DMA_LOOP_COUNT=1000000. Fix this by using a non-zero value for delay_us. Use delay_us=10 to keep the delay in the hot path of starting DMA transfers minimal but still avoid CPU stalls in case of unexpected hardware failures. One-off measurement with delay_us=0 causes the cpu to busy wait around 7 minutes in the timeout case. After applying this patch with delay_us=10 the measured timeout was 1053428 microseconds which is roughly equivalent to the expected 1000000 microseconds specified in XILINX_DMA_LOOP_COUNT. Add a constant XILINX_DMA_POLL_DELAY_US for delay_us value. | ||||
| CVE-2026-93170 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers Fix a race condition in AXIDMA and MCDMA irq handlers where the channel could be incorrectly marked as idle and attempt spurious transfers when descriptors are still being processed. The issue occurs when: 1. Multiple descriptors are queued and active. 2. An interrupt fires after completing some descriptors. 3. xilinx_dma_complete_descriptor() moves completed descriptors to done_list. 4. Channel is marked idle and start_transfer() is called even though active_list still contains unprocessed descriptors. 5. This leads to premature transfer attempts and potential descriptor corruption or missed completions. Only mark the channel as idle and start new transfers when the active list is actually empty, ensuring proper channel state management and avoiding spurious transfer attempts. | ||||
| CVE-2026-15098 | 2026-09-19 | 6.4 Medium | ||
| The Real3D Flipbook Lite plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'lightboxtext' shortcode attribute (and other unsanitized attributes handled by on_shortcode()) in versions up to, and including, 5.1.1. This is due to insufficient input sanitization and output escaping in the on_shortcode() and print_global_options() functions: shortcode attribute values are copied verbatim into $this->flipbook_options and then emitted via wp_json_encode() inside a <script type="application/json"> block without the JSON_HEX_TAG flag, allowing a literal </script> byte sequence in the attribute value to break out of the JSON script context. Because WordPress's shortcode_parse_atts() applies stripcslashes() to attribute values, an attacker can encode the breakout tag as \x3c/script\x3e\x3cscript\x3e…\x3c/script\x3e, which survives the wp_kses_post save-time filter applied to Contributor content (the escape bytes are safe text characters, not HTML tags) and is decoded to real angle brackets at render time. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user (typically an Editor or Administrator previewing/moderating the pending post) accesses an injected page. | ||||
| CVE-2026-87917 | 2026-09-19 | 6.1 Medium | ||
| The MC4WP: Mailchimp for WordPress plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via 'data' Dynamic Content Tag in all versions up to, and including, 4.14.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. | ||||
| CVE-2026-1984 | 2026-09-19 | 5.3 Medium | ||
| The Ibtana – Ecommerce Product Addons plugin for WordPress is vulnerable to unauthorized post meta modification due to a missing capability check on the 'iepa_use_gt_editor' AJAX action in all versions up to, and including, 0.4.7.7. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update or delete arbitrary post meta entries via the 'iepa_builder' meta key. | ||||
| CVE-2026-9855 | 2026-09-19 | 6.5 Medium | ||
| The Custom Field Template plugin for WordPress is vulnerable to generic SQL Injection via the 'post_ID' parameter in all versions up to, and including, 2.7.8 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with contributor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The capability check via current_user_can('edit_post', $id) is bypassable because WordPress internally casts $id to an integer for the permission evaluation while the full unsanitized string is preserved and passed to the SQL sink, and a valid nonce — which is also required — can be legitimately obtained by any Contributor-level user from the post edit screen. | ||||