Export limit exceeded: 383474 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 383474 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 10340 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10340 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74549 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Prevent access to unsupported weight registers Sashiko reports: During initialization of the nct6116 chip, the driver sets data->pwm_num to 5. However, it assigns several NCT6106 register arrays (such as NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP. These arrays only contain 3 elements. In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If data->has_pwm has bits 3 or 4 set (which is structurally possible for nct6116), the loop attempts to read elements at index 3 and 4 from these 3-element arrays. This results in a global out-of-bounds read, which can be caught by KASAN. Furthermore, the driver uses these garbage out-of-bounds values as hardware register addresses for subsequent read and write operations. This leads to invalid hardware register access, potentially causing hardware misconfiguration or system crashes. The underlying problem is that the chip does support up to five fan control channels, but only the first three support weight control. Fix the problem by extending the affected weight register arrays with zeroed fields. The driver uses zeroed register addresses to determine if a register is supported or not, and skips accesses for unsupported registers. | ||||
| CVE-2026-72019 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: macsec: don't read an unset MAC header in macsec_encrypt() macsec_encrypt() reads the Ethernet header via eth_hdr(skb) (skb->head + skb->mac_header) to memmove() the 12 source/destination MAC bytes forward and make room for the SecTAG. On the AF_PACKET SOCK_RAW + PACKET_QDISC_BYPASS transmit path the skb reaches the macsec ndo_start_xmit() with the MAC header unset, so eth_hdr(skb) resolves to skb->head + (u16)~0 and the read is out of bounds: a 12-byte heap over-read that is also emitted on the wire as the frame's outer source/destination MAC. KASAN reports a slab-out-of-bounds read in macsec_start_xmit() on 6.0; on current mainline a CONFIG_DEBUG_NET build flags it as an unset mac header in skb_mac_header(). On the TX path the L2 header is at skb->data, so use skb_eth_hdr(), added by commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()") for exactly this purpose. | ||||
| CVE-2026-18020 | 1 Ibm | 1 I | 2026-08-19 | 5.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an off-by-one error in bounds checking. | ||||
| CVE-2026-68433 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.6 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: bound get_version reply decode to front len handle_get_version_reply() uses msg->front_alloc_len as the decode boundary for MON_GET_VERSION_REPLY. That is the size of the reused reply buffer, not the number of bytes actually received. A truncated reply can therefore pass ceph_decode_need() and decode the second u64 from stale tail bytes left in the buffer by an earlier message, causing an uninitialized memory read. Use msg->front.iov_len as the receive-side decode boundary, matching other libceph reply handlers and limiting decoding to the bytes that were actually read from the wire. | ||||
| CVE-2026-17649 | 1 Ibm | 1 I | 2026-08-19 | 5.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to obtain sensitive information due to an out-of-bounds read. | ||||
| CVE-2026-68402 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: bound element ID read when checking non-inheritance cfg80211_is_element_inherited() reads the first data octet of the candidate element (id = elem->data[0]) to look it up in an extension non-inheritance list. It does so after testing elem->id, but without verifying that the element actually has a data octet. A zero-length extension element (WLAN_EID_EXTENSION with length 0) therefore makes it read one octet past the end of the element. _ieee802_11_parse_elems_full() runs this check for every element of a frame once a non-inheritance context exists -- e.g. while parsing a per-STA profile of a Multi-Link element in a (re)association response, or a non-transmitted BSS profile -- so a crafted frame from an AP can trigger a one-octet slab-out-of-bounds read during element parsing: BUG: KASAN: slab-out-of-bounds in cfg80211_is_element_inherited Read of size 1 ... in net/wireless/scan.c Return early (treat the element as inherited) when an extension element carries no data, mirroring the existing handling of empty ID lists. The bug was found by fuzzing ieee802_11_parse_elems_full() under KASAN. | ||||
| CVE-2026-68373 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: at76c50x-usb: avoid length underflow in at76_guess_freq() at76_guess_freq() checks only that the received frame is at least a bare 802.11 header (24 bytes) before subtracting the fixed management-body offset: len -= el_off; For both beacon and probe response frames, el_off is 36. If the frame is shorter than el_off, subtracting it causes the calculated IE length to wrap. The length is eventually passed to cfg80211_find_elem_match() as a very large unsigned value, so the element walk runs beyond the RX skb. This path is reached from at76_rx_tasklet() while scanning. If the device delivers a truncated beacon or probe response, the oversized IE length causes an out-of-bounds read during scanning. Skip the IE lookup if the frame does not reach the variable elements, before subtracting el_off. | ||||
| CVE-2026-68368 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: validate datagram bounds in ncm_unwrap_ntb() When unpacking host-supplied NTBs, ncm_unwrap_ntb() checks datagram length against frame_max but does not verify that the datagram fits within the declared block length. Additionally, when decoding multiple NTBs from a single socket buffer, subsequent block lengths are not checked against the actual remaining buffer data. With these checks missing, a malicious USB host can specify datagram offsets and lengths that point beyond the block, or supply secondary NTB headers declaring lengths larger than the buffer. skb_put_data() then copies adjacent kernel memory from skb_shared_info into the network skb. Fix this by verifying that sufficient buffer space remains for the NTB header before parsing, handling zero-length block declarations, ensuring that block lengths never exceed the remaining buffer space, and verifying that each datagram payload stays strictly within the block boundary. | ||||
| CVE-2026-68366 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: clamp SEND_RESPONSE length to the response buffer uvc_send_response() builds the UVC control response from a user-supplied struct uvc_request_data: req->length = min_t(unsigned int, uvc->event_length, data->length); ... memcpy(req->buf, data->data, req->length); req->length is clamped to uvc->event_length, which is taken from the host control request wLength (up to UVC_MAX_REQUEST_SIZE, 64), and to data->length, which comes from the UVCIOC_SEND_RESPONSE ioctl and is only checked for being negative. The source buffer data->data is only 60 bytes, so a response with uvc->event_length and data->length both greater than 60 makes memcpy() read past the end of data->data. Clamp req->length to sizeof(data->data) as well. | ||||
| CVE-2026-68353 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware num_msg in TX complete handler The firmware-controlled num_msg field (u8, 0-255) drives the loop in ath6kl_wmi_tx_complete_event_rx() without validation against the buffer length. This allows out-of-bounds reads of up to 1020 bytes past the WMI event buffer when the firmware sends an inflated num_msg. Add a check that the buffer is large enough to hold the fixed struct and the num_msg variable-length entries. | ||||
| CVE-2026-68351 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: bound memcpy length in cmd callback to prevent OOB read When the firmware sends a command response with a length mismatch, carl9170_cmd_callback() logs the mismatch and calls carl9170_restart() but then falls through to memcpy(ar->readbuf, buffer + 4, len - 4). Since len comes from the firmware and can exceed ar->readlen, this copies more data than the readbuf was allocated for. Bound the memcpy to min(len - 4, ar->readlen) so that the response is still completed -- avoiding repeated restarts from queued garbage -- while preventing an overread past the response buffer. | ||||
| CVE-2026-68350 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: fix OOB read from off-by-two in TX status handler The bounds check in carl9170_tx_process_status() uses `i > ((cmd->hdr.len / 2) + 1)` which is off by two, allowing 2 extra iterations past valid _tx_status entries when the firmware- controlled hdr.ext exceeds hdr.len/2. Fix by using the correct comparison `i >= (cmd->hdr.len / 2)`. | ||||
| CVE-2026-68340 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: occ: validate poll response sensor blocks The OCC poll response parser walks a counted list of sensor data blocks. It used the static backing-array capacity as the parse boundary, but a transport response makes only data_length bytes current and valid. A truncated response can therefore make the parser consume a block header or block extent outside the current response. Use data_length as the parent boundary, prove the fixed poll header and each current block header before reading them, and prove the complete block before advancing. Keep parsed sensor metadata local until the complete response has passed validation, then publish it. Propagate malformed-response errors before publishing the OCC as active. | ||||
| CVE-2026-68326 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: bound uAP association event IEs to the event buffer mwifiex_process_uap_event() handles EVENT_UAP_STA_ASSOC by exposing the (re)association request IEs that the firmware copies into the event: sinfo->assoc_req_ies = &event->data[len]; len = (u8 *)sinfo->assoc_req_ies - (u8 *)&event->frame_control; sinfo->assoc_req_ies_len = le16_to_cpu(event->len) - (u16)len; event->len is supplied by the device firmware and is never validated, and the subtraction is unchecked. assoc_req_ies points into adapter->event_body[MAX_EVENT_SIZE], a fixed-size array embedded in the kmalloc()'d struct mwifiex_adapter. On the ap_11n_enabled path mwifiex_set_sta_ht_cap() walks these IEs with cfg80211_find_ie(), whose for_each_element() loop dereferences each element header. A firmware-reported event->len larger than the bytes actually received makes assoc_req_ies_len describe IEs that extend past event_body, so the walk reads out of the adapter slab object, a slab-out-of-bounds read (KASAN: slab-out-of-bounds in cfg80211_find_ie). An event->len smaller than the header instead makes the int subtraction negative, which wraps to a huge size_t when stored in assoc_req_ies_len. The same length is handed to cfg80211_new_sta(), so a more modest over-claim can also copy stale event_body bytes into the NL80211_CMD_NEW_STATION notification. A malicious or malfunctioning mwifiex device (USB/SDIO/PCIe) can deliver such an event while the interface is in AP/uAP mode. Validate event->len before use: reject a length that underflows the header or that would place the IEs outside the event_body[] buffer the event was copied into. event->len here is struct mwifiex_assoc_event.len, a payload field internal to this event, not the transport frame length, so it is validated in this handler rather than at the generic MWIFIEX_TYPE_EVENT receive path, which only sees the event cause and the transport frame length. The bound is against event_body[MAX_EVENT_SIZE] rather than the actually-received length because the transports store the event differently (USB and SDIO leave the 4-byte event header in event_skb, PCIe strips it via skb_pull), whereas event_body is the single fixed buffer all of them copy the event into. This is the event-path analogue of the receive-path bounds checks added in commit 119585281617 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets"). | ||||
| CVE-2026-68229 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: media: cedrus: skip invalid H.264 reference list entries Cedrus consumes H.264 ref_pic_list0/ref_pic_list1 entries from the stateless slice control and later uses their indices to look up decode->dpb[] in _cedrus_write_ref_list(). Rejecting such controls in cedrus_try_ctrl() would break existing userspace, since stateless H.264 reference lists may legitimately carry out-of-range indices for missing references. Instead, guard the actual DPB lookup in Cedrus and skip entries whose indices do not fit the fixed V4L2_H264_NUM_DPB_ENTRIES array. This keeps the fix local to the driver use site and avoids out-of-bounds reads from malformed or unsupported reference list entries. | ||||
| CVE-2026-68196 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.3 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: validate assoc response length before subtracting header wilc_parse_assoc_resp_info() computes the trailing IE length as ies_len = buffer_len - sizeof(*res); without first checking that buffer_len is at least sizeof(struct wilc_assoc_resp) (6 bytes). buffer_len is the length reported for a received association response (host_int_parse_assoc_resp_info() passes hif_drv->assoc_resp / assoc_resp_info_len straight in) and must be validated before the driver accesses the fixed header. For a frame shorter than the 6-byte fixed header, the subtraction wraps. For a four-byte response the result is truncated to a u16 ies_len of 65534, so kmemdup() then attempts to copy 65534 bytes starting at buffer + sizeof(*res), beyond the valid association-response data (CWE-125). A response shorter than four bytes can also cause an out-of-bounds read of res->status_code at offsets 2 and 3. Reject frames too short to hold the fixed header before touching the header or computing ies_len. Also set the connection status to a failure on this path: the caller falls through to a "conn_info->status == WLAN_STATUS_SUCCESS" check after the parser returns, so leaving the status untouched could let a malformed short response be treated as a successful association. | ||||
| CVE-2026-68190 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie() rtw_get_wps_ie() iterates over IE data from network frames without validating that the IE header and payload fit within the remaining buffer before reading them. Specifically: - in_ie[cnt + 1] is read without checking cnt + 1 < in_len - memcmp(&in_ie[cnt + 2], ...) accesses cnt + 2 without bounds check - in_ie[cnt + 1] is used as length without verifying payload fits Add bounds checks at the top of the loop body to break early if fewer than 2 bytes remain for the IE header, or if the declared payload extends past the end of the buffer. Also require at least 4 bytes of payload before comparing the WPS OUI. | ||||
| CVE-2026-68187 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: exec: fix unsigned loop counter wrap in transfer_args_to_stack() The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes zero the loop condition index >= stop is always true. After the index == 0 iteration the decrement wraps to ULONG_MAX and bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array. The pointer has wrapped to -1. That garbage pointer is then passed to kmap_local_page() and PAGE_SIZE bytes are copied from wherever that lands into the stack of the process being created. And the loop doesn't terminate either... Getting there only requires bprm->p < PAGE_SIZE. On !MMU bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only constraint on how far bprm->p is pushed down is valid_arg_len(), i.e. that each individual string still fits in what is left. bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a single argument or environment string of a little over 31 pages leaves it in the first page: Oops - load access fault [#1] CPU: 0 UID: 0 PID: 1 Comm: victim Not tainted 7.2.0-rc4 #1 epc : __memcpy+0xd4/0xf8 ra : transfer_args_to_stack+0xaa/0xae s4 : ffffffffffffffff s2 : 0000000000000000 a1 : ffffffdc98000000 a2 : 0000000000001000 status: 0000000a00001880 badaddr: ffffffdc98000000 cause: 0000000000000005 [<801a5324>] __memcpy+0xd4/0xf8 [<800d5f6a>] load_flat_binary+0x43a/0x65e [<800a2de4>] bprm_execve+0x1d4/0x316 [<800a351a>] do_execveat_common+0x12e/0x138 [<800a3d44>] __riscv_sys_execve+0x38/0x4e Kernel panic - not syncing: Fatal exception in interrupt This is an arcane bug but we should still fix it. Count down from MAX_ARG_PAGES so the loop ends when index reaches stop, stop == 0 included. The iterations performed are unchanged for every other value of stop. Only CONFIG_MMU=n builds are affected, transfer_args_to_stack() is used by binfmt_flat and binfmt_elf_fdpic on nommu only. The loop predates git history. commit 7e7ec6a93434 ("elf_fdpic_transfer_args_to_stack(): make it generic") only moved it from binfmt_elf_fdpic.c into fs/exec.c and narrowed the copy to the used part of the first page. The condition and the decrement are unchanged from 2.6.12-rc2. | ||||
| CVE-2026-68184 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cdrom: fix stack out-of-bounds read in CDROMVOLCTRL mmc_ioctl_cdrom_volume() first reads the audio control mode page into a 32-byte stack buffer with cgc->buflen set to 24. If the device reports a block descriptor, the function increases cgc->buflen to include that descriptor and reads the page again. For CDROMVOLCTRL, the function then builds a MODE SELECT parameter list by moving cgc->buffer forward by offset - 8 bytes. This drops the block descriptor from the outgoing payload and leaves a new 8-byte mode parameter header in front of the audio control page. However, cgc->buflen is left unchanged. With a standard 8-byte block descriptor, cgc->buffer points at buffer + 8 but cgc->buflen remains 32. cdrom_mode_select() therefore asks the low level packet path to write 32 bytes from that adjusted pointer, reading 8 bytes past the end of the 32-byte stack buffer. This is not hit by CDROMVOLREAD, and CDROMVOLCTRL only triggers it on drives that return a non-zero block descriptor length, which helps explain why it has gone unnoticed. The overread is also sent to the device as extra MODE SELECT payload, so it may not produce an obvious local failure. Reduce cgc->buflen by the same amount as the buffer pointer adjustment so the MODE SELECT transfer covers only the intended parameter list. | ||||
| CVE-2026-68160 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps() ceph_handle_caps() reads snap_trace_len from the wire-format ceph_mds_caps header and uses it unconditionally to build a fake end pointer (snaptrace + snaptrace_len) that is later handed to ceph_update_snap_trace() in the CEPH_CAP_OP_IMPORT case: snaptrace = h + 1; snaptrace_len = le32_to_cpu(h->snap_trace_len); p = snaptrace + snaptrace_len; ... case CEPH_CAP_OP_IMPORT: if (snaptrace_len) { ... if (ceph_update_snap_trace(mdsc, snaptrace, snaptrace + snaptrace_len, false, &realm)) { ... } ceph_update_snap_trace() then decodes a struct ceph_mds_snap_realm from snaptrace using ceph_decode_need(&p, e, sizeof(*ri), bad) with the attacker-supplied fake end e == snaptrace + snaptrace_len. With snaptrace_len == 0xFFFFFFFF the bound check is trivially satisfied, ri = p reads sizeof(struct ceph_mds_snap_realm) past the legitimate msg->front buffer, and ri->num_snaps / ri->num_prior_parent_snaps then drive further out-of-bounds reads of the encoded snap arrays. The eleven msg_version >= 2 .. msg_version >= 12 decoder blocks above the op switch each catch this OOB through their ceph_decode_*_safe() / ceph_decode_need() helpers, but they sit behind a hdr.version-gated if, so a malicious or compromised MDS that sets msg->hdr.version = 1 reaches the IMPORT path with no version-gated decoder having validated snap_trace_len. The shape has been present since ceph_handle_caps() was introduced. Validate snap_trace_len against the message front buffer before consuming it, using the canonical ceph_decode_need() / ceph_has_room() helper. The helper bounds the length with subtraction (n <= end - p, guarded by end >= p) rather than pointer addition, so it is wrap-safe for the attacker-controlled u32 length on 32-bit builds where p + snap_trace_len could overflow the address space. This matches the rest of the ceph decode path (e.g. the pool_ns_len check a few lines below), and the existing goto bad cleanup already covers this exit path. | ||||