Export limit exceeded: 410591 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410591 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98504 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: of_property: Omit bus properties without a subordinate bus A bridge (a device with a Type 1 header) may not have a secondary bus allocated (pdev->subordinate), e.g., if there are no available bus numbers or the bridge secondary/subordinate bus numbers are not writable. The dynamic OF helpers of_pci_prop_bus_range() and of_pci_prop_intr_map() dereference pdev->subordinate without checking it. When CONFIG_PCI_DYNAMIC_OF_NODES is enabled, this can cause a NULL pointer dereference and early boot hang. Generate 'bus-range' and 'interrupt-map' properties only when a subordinate bus exists. Keep the node and its remaining properties for bridges without one. The problem was latent since 407d1a51921e ("PCI: Create device tree node for bridge"), but wasn't reachable until 1f340724419e ("PCI: of: Create device tree PCI host bridge node"), which appeared in v6.15. Before 1f340724419e, of_pci_make_dev_node() returned early because the parent OF node was missing. [bhelgaas: move pdev->subordinate test to callees, commit log] | ||||
| CVE-2026-98503 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: packet: use ubuf_info completion for TX_RING packets tpacket_snd sends skbs with frags pointing into its ring slots. Slots are released when skb->destructor is called. A call to skb_orphan calls skb->destructor before the skb is freed. This can cause the slot to be reused while still linked into the skb. Switch to standard zerocopy completion (ubuf_info) so the slot is only released once all references to the payload are freed or copied. Restore skb->destructor to standard sock_wfree. The ubuf_info completion callback can be called with a NULL skb, but only from net_zcopy_put and related API, used by zerocopy implementations that hold their own reference on the uarg, such as MSG_ZEROCOPY. This uarg is only ever completed from skb_zcopy_clear, so skb is always set. To prevent userspace from aliasing in-flight state on shared ring slots, allocate tpacket_uarg per packet, rather than per slot. This adds a small allocation to the transmit path. Use standard kmalloc to allow backporting to stable kernels. The uarg holds an sk_wmem_alloc reference, rather than an sk_refcnt reference. packet_free_tx_ring waits on sk_wmem_alloc before freeing the ring pages. Always allocate vec->deferred for tx_ring so page-backed rings also wait on sk_wmem_alloc when skb_copy_ubufs drops page refs before calling tpacket_ubuf_complete. Drop the tx_ring.pg_vec test that tpacket_destruct_skb performed before accessing the slot. The sk_wmem_alloc reference now guarantees that the slot is valid. The test is also not sufficient by itself, as it reads pg_vec without pg_vec_lock, so it can race with packet_set_ring. As a result a slot is released when its payload is copied, which can be before transmission (e.g., in skb_orphan_frags_rx). If copied before skb_tx_timestamp() is called, no slot timestamp is recorded, similar to when skb_orphan() was called early in the datapath before this patch. Revert the now unused previous skb_zcopy_.._nouarg infra. Depends on commit 992cc9f94ca9 ("net/packet: defer vmalloc TX_RING free until skbs finish"). | ||||
| CVE-2026-98502 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: HID: alps: unregister DualPoint Stick input device on remove alps_input_configured() allocates a second input device ("DualPoint Stick") with input_allocate_device() and registers it, but the alps_driver struct has no .remove handler and input2 is not tracked in hdev->inputs. The default remove path (hid_hw_stop -> hidinput_disconnect) only iterates hdev->inputs, so input2 is never unregistered and leaks on every device removal. Add a .remove handler that stops the device first (preventing URB callbacks from touching input2 during teardown) and then unregisters input2. | ||||
| CVE-2026-98501 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: alps: fix use-after-free on input2 registration failure alps_input_configured() stores data->input2 before calling input_register_device(). If registration fails, input_free_device() frees the input device but data->input2 still points to the freed memory. alps_input_configured() calls hid_hw_open() before allocating input2, so URBs are already active and raw_event can fire during the failure window. A U1_SP_ABSOLUTE_REPORT_ID report arriving then causes u1_raw_event() to dereference the freed data->input2 -> use-after-free. Fix by only storing input2 into drvdata after successful registration and adding a NULL guard in the raw_event path. | ||||
| CVE-2026-98468 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix spurious warning for benign stage 2 teardown race kvmtool was used to establish an L1 guest with 8 CPUs and 8 GiB of RAM, an L2 guest with 4 CPUs and 4 GiB of RAM and an L3 guest with 2 CPUs and 2 GiB of RAM, all of which was then exited. Under memory pressure in the L0 host warnings were observed due to migration triggered by compaction: WARNING: arch/arm64/kvm/mmu.c:336 at __unmap_stage2_range+0x64/0x80, CPU#5: kcompactd0/66 Which was, in turn, triggered by an MMU notifier for the host invalidation: mmu_notifier_invalidate_range_start() -> ... -> kvm_mmu_notifier_invalidate_range_start() -> kvm_mmu_unmap_gfn_range() -> kvm_unmap_gfn_range() -> kvm_nested_s2_unmap() -> kvm_stage2_unmap_range() -> __unmap_stage2_range() -> stage2_apply_range() <- -EINVAL, triggering a WARN_ON() Racing with L0's teardown of stage 2 page tables: exit_mm() -> mmput() -> __mmput() -> exit_mmap() -> mmu_notifier_release() -> ... -> kvm_mmu_notifier_release() -> kvm_flush_shadow_all() -> kvm_arch_flush_shadow_all() -> kvm_free_stage2_pgd() -> [ acquire kvm->mmu_lock for write ] -> mmu->pgt = NULL [ among other tasks ] -> [ release kvm->mmu_lock for write ] It turns out there is a benign race resulting in a spurious warning: Thread A - notify: migration | Thread B - notify: release -------------------------------|--------------------------------- < kvm->mmu_lock held > | stage2_apply_range() | get mmu->pgt, check !NULL | ... | kvm_arch_flush_shadow_all() cond_resched_rwlock_write(); | < contend, sleep kvm->mmu_lock > < drop kvm->mmu_lock > | < acquire kvm->mmu_lock> | ... | kvm_free_stage2_pgd() | mmu->pgt = NULL | < invalidate MMU > | ... | < release kvm->mmu_lock > [ scheduled ] | stage2_apply_range() | < loop to next > | get, mmu->pgt, check !NULL | is NULL, return -EINVAL | __unmap_stage2_range() | WARN_ON(-EINVAL) <--- entirely spurious - the race was handled correctly. Fix the spurious warning by updating stage2_apply_range() to no longer treat concurrent PGT teardown on lock release as an error - whether the walker is tearing down page tables or doing something else this is a legitimate reason to abort the operation without error. This keeps the warning in place for all other circumstances. In practice only __unmap_stage2_range() actually does anything with the error so this only impacts that. | ||||
| CVE-2026-98467 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix null ptr deref on nested wp/unmap, teardown race Commit 7270cc9157f4 ("KVM: arm64: nv: Handle VNCR_EL2 invalidation from MMU notifiers") introduced VNCR_EL2 invalidation in both kvm_nested_s2_unmap() and kvm_nested_s2_wp(). However at the point of this being performed concurrent stage 2 teardown of a nested guest can cause kvm->arch.mmu.pgt to be set to NULL. This happens in kvm_flush_shadow_all() -> kvm_arch_flush_shadow_all() -> kvm_free_stage2_pgd() and is performed under the kvm->mmu_lock. Commit ec14c272408a ("KVM: arm64: nv: Unmap/flush shadow stage 2 page tables") introduced the teardown of the entire nested MMU range, which then invokes stage2_apply_range() with resched=true: mmu_notifier_invalidate_range_start() -> ... -> kvm_mmu_notifier_invalidate_range_start() -> kvm_mmu_unmap_gfn_range() -> kvm_unmap_gfn_range() -> kvm_nested_s2_unmap() -> kvm_stage2_unmap_range() -> __unmap_stage2_range() -> stage2_apply_range() This means that stage2_apply_range() can drop the kvm->mmu_lock and thus concurrent progress can be made in lockstep with kvm_arch_flush_shadow_all(). If kvm_arch_flush_shadow_all() advances ahead of stage2_apply_range() and completes its operation it guarantees a NULL pointer deref. Since kvm_free_stage2_pgd() is performed under the kvm->mmu_lock this will either be observed NULL or not and serialised against kvm_free_stage2_pgd(). Resolve the issue by abstracting the invalidation to a new function, kvm_invalidate_vncr_ipa_all(), and check that the pgt is non-NULL before dereferencing it. | ||||
| CVE-2026-98466 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Transfer the hyp stack pages out of the host stage-2 fix_host_ownership() walks only the linear-map alias of each memblock region, and the per-CPU hyp stack, mapped in the private VA range for its guard page, has none. Walk each stack's VA range with the same walker. | ||||
| CVE-2026-98465 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Serialize IMSIC attributes with vCPU migration KVM device ioctls are not serialized against KVM_RUN. As a result, kvm_riscv_aia_imsic_rw_attr() can snapshot the physical CPU and HGEI of an IMSIC VS-file before a concurrent vCPU migration releases it. The HGEI can then be allocated to another vCPU before imsic_vsfile_rw() uses the stale tuple. A GET or SET attribute may consequently access the new owner's interrupt file. Serialize the entire IMSIC attribute operation with the target vCPU mutex. This prevents the VS-file from being migrated and recycled until the attribute access completes. Acquire the mutex killably so that the device ioctl remains interruptible while waiting for KVM_RUN to finish. | ||||
| CVE-2026-98464 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Synchronize hrtimer callback during teardown The non-Sstc hrtimer callback clears next_set before its final uses of the enclosing vCPU. If teardown observes next_set as false while the callback is still running, kvm_riscv_vcpu_timer_cancel() skips hrtimer_cancel() and kvm_destroy_vcpus() can free the vCPU before the callback enters kvm_riscv_vcpu_set_interrupt(). A guest can arm the timer with SBI TIME and request shutdown with SBI legacy shutdown or SRST. A VMM that honors KVM_EXIT_SYSTEM_EVENT and destroys the VM supplies the teardown side of the race; no post-launch host ioctl is needed to arm or request teardown. On upstream master 62cc90241548, generic KASAN reported: BUG: KASAN: slab-use-after-free in do_raw_spin_lock Write of size 4 at addr ff60000005e58898 kvm_riscv_vcpu_set_interrupt kvm_riscv_vcpu_hrtimer_expired __hrtimer_run_queues hrtimer_interrupt The object was allocated by KVM_CREATE_VCPU and freed concurrently by: kvm_destroy_vcpus kvm_arch_destroy_vm kvm_destroy_vm __fput For deterministic validation, I added mdelay(1000) immediately after the existing next_set = false assignment. This only widens the existing post-clear callback window. A no-delay trace build naturally reached the callback-after-teardown-start/before-deinit ordering in 12 of 200 runs, but 1,500 stock-kernel stress iterations did not produce a KASAN report, so natural reproduction is timing-sensitive. Always invoke hrtimer_cancel() for an initialized timer. Preserve the existing -EINVAL result when the timer is no longer set, but only after synchronizing with a running callback. With this patch, hrtimer_cancel() blocked for the full widened callback window before vCPU destruction. KASAN reported no error in 100 fixed-and-widened runs or 200 fix-only timing-sweep runs. | ||||
| CVE-2026-98463 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags schedule_deferred_locked() skips scheduling a deferred action while SCX_RQ_IN_WAKEUP is set and relies on the task_woken_scx() call that follows a wakeup enqueue to run it. enqueue_task_scx() sets the flag from the merged enqueue flags, which include the flags stashed for a remote activation. move_remote_task_to_local_dsq() thus sets SCX_RQ_IN_WAKEUP on the destination rq when the moved task was woken up, although no task_woken_scx() follows that activation. An IMMED insert into a busy destination requests a local reenqueue during that enqueue. The request gets linked but not scheduled and stays pending until an unrelated wakeup or preemption on that CPU runs the deferred actions. The IMMED task sits behind the running task in the meantime. If nothing runs them before the scheduler is disabled, the request outlives the scheduler and points into its freed per-cpu area, which the next scheduler dereferences from run_deferred(). Test the core enqueue flags for the wakeup bit. Only the core's wakeup path is followed by task_woken_scx(). | ||||
| CVE-2026-98462 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix CIS hold ownership on reuse Commit 69997d50ec57 ("Bluetooth: ISO: handle bound CIS cleanup via hci_conn") made hci_bind_cis() and hci_connect_cis() return a connection with one hold for the ISO layer. hci_bind_cis() currently takes that hold only after configuring a CIS, so its BT_CONNECTED and matching BT_BOUND paths return a bare lookup result. Its configuration failure path can likewise call hci_conn_drop() before taking a hold. Take the hold before any state-dependent return or configuration error so every successful return follows the documented ownership contract and every error drop is balanced. hci_connect_cis() also assumes hci_conn_link() always takes a new CIS hold before dropping the one returned by hci_bind_cis(). However, the helper returns an existing link without taking another hold. In that case, preserve the CIS hold for the caller and drop the redundant LE hold because the existing link already owns its parent hold. Returning early also avoids changing an existing CIS back to BT_CONNECT. | ||||
| CVE-2026-98461 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: validate event length before filtering is_filtered_packet() reads the event code from skb->data[0] without first checking that the skb is nonempty. When an opcode filter is configured, it also reads the command opcode at offsets 3 or 4 without checking that a Command Complete or Command Status event is long enough. hci_send_to_sock() invokes the filter before hci_event_packet() validates the event header. A malformed event supplied by a controller or a vhci device can therefore cause an out-of-bounds read. Keep the unmasked event code for the opcode checks. The masked value is needed for the 64-bit event bitmap, but using it to identify command events aliases event codes above 0x3f. In particular, Synchronous Train Complete (0x4f) was treated as Command Status (0x0f) even though its payload has no opcode. Reject actual command events that are too short for the field being inspected. A truncated command event cannot match a configured opcode. | ||||
| CVE-2026-98460 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: reject out-of-range OCF values The raw HCI socket security filter has 128 OCF bits per supported OGF, but masks the 10-bit OCF with 127 before looking up the command. An unprivileged socket can therefore submit a reserved OCF that aliases an allowlisted command modulo 128. A conforming controller should reject reserved opcodes. Nevertheless, the security decision must apply to the opcode that will actually be sent, especially since controller-specific behavior is outside the host stack's control. Reject OCF values that cannot be represented by the security filter instead of aliasing them onto an unrelated command. | ||||
| CVE-2026-98459 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: balance the parent hold in hci_bind_bis() hci_conn_link() takes a lifetime reference to its parent with hci_conn_get(), but only takes an operational hold on the child. hci_conn_unlink() later balances both a hold and a reference on the parent. The SCO and CIS paths pass a parent acquired from a connect helper, so it already has a hold. For an additional BIS, hci_bind_bis() obtains the parent from hci_conn_hash_lookup_big(), which returns a bare pointer. Unlinking the child then drops the parent's existing hold and can schedule it for disconnection while its socket is still using it. Take a hold on the parent before linking it and drop that hold if linking fails. A successful link transfers the hold to hci_conn_unlink(). | ||||
| CVE-2026-98458 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: release unused CIS holds after channel attach hci_bind_cis() and hci_connect_cis() return one hci_conn hold for the ISO layer. A new channel association consumes that hold, which is eventually released by iso_conn_free(). There are two cases where iso_chan_add() does not create an association: it returns success when the socket is already attached to the same iso_conn, and it returns -EBUSY when another socket is attached. The hold returned for the current call is unused in both cases. This occurs when deferred setup calls iso_connect_cis() again for its existing socket, or when another socket attempts to reuse the CIS. Detect the idempotent case while the connection is locked and release the unused hold after iso_chan_add(). Also release it on -EBUSY. Do not drop it for other errors: a newly allocated iso_conn releases the transferred hold when its last temporary reference is put. | ||||
| CVE-2026-98457 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate frame length before control and FCS access l2cap_data_rcv() unpacks either a two-byte or four-byte control field without first ensuring that it is present. A short ERTM or streaming-mode frame can therefore cause an out-of-bounds read. There is a second short-frame case when CRC16 is enabled. After the control field is pulled, l2cap_check_fcs() subtracts two from skb->len without checking it. If fewer than two bytes remain, the subtraction wraps; skb_trim() leaves the buffer unchanged and the subsequent FCS load reads past the logical end of the frame. Validate that the frame contains both its control field and, when enabled, its FCS before either field is accessed. | ||||
| CVE-2026-98456 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix race in read_unconf_index_list() read_unconf_index_list() counts unconfigured controllers before allocating its response, then checks the device flags again while filling it. hci_dev_list_lock stabilizes list membership, but it does not serialize the per-device flags. During asynchronous controller setup, the worker can set HCI_UNCONFIGURED and clear HCI_SETUP between the two passes. A controller omitted from the allocation count can then become eligible for the fill pass, causing an out-of-bounds write to rp->index[]. Allocate space for every device on hci_dev_list. Since list membership cannot change while hci_dev_list_lock is held, the response remains large enough regardless of flag transitions. The reported count and response length still include only eligible unconfigured controllers. | ||||
| CVE-2026-98455 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO The RFCOMM_CONNINFO getsockopt handler accepts a socket that is not connected as long as deferred setup is enabled: if (sk->sk_state != BT_CONNECTED && !rfcomm_pi(sk)->dlc->defer_setup) { err = -ENOTCONN; break; } l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk; dlc->defer_setup is set in rfcomm_sock_init() when rfcomm_connect_ind() creates a child socket for an incoming connection on a listening socket that has BT_DEFER_SETUP enabled. It is never cleared afterwards. The session, however, can go away underneath it. rfcomm_recv_disc() forces the dlc state before tearing it down: d->state = BT_CLOSED; __rfcomm_dlc_close(d, err); The RFCOMM_DEFER_SETUP early return in __rfcomm_dlc_close() only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2, so with the state already BT_CLOSED that switch does not match and the function falls through to rfcomm_dlc_unlink(), which sets d->session = NULL, while d->defer_setup stays 1. A getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket after that point therefore skips the -ENOTCONN path -- sk->sk_state is BT_CLOSED, but dlc->defer_setup is still set -- and dereferences the NULL session. No race is needed: once the DISC has been processed, the dereference is unconditional. Reproduced on a KASAN kernel under QEMU with a BR/EDR peer emulated over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM PSM, starts a session and sends SABM for a channel bound with BT_DEFER_SETUP, and sends DISC for that dlci after the socket has been accepted. getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket then hits: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 150 Comm: init Tainted: G B 7.3.0-rc3-g5dd1818b15d9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:rfcomm_sock_getsockopt+0x529/0x780 Call Trace: <TASK> do_sock_getsockopt+0x3ad/0x7d0 __sys_getsockopt+0x10e/0x1b0 __x64_sys_getsockopt+0xc2/0x160 do_syscall_64+0xda/0x4b0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> 0x10 is the offset of sock in struct rfcomm_session; rfcomm_sock_getsockopt_old() is inlined into rfcomm_sock_getsockopt(). Commit 43a556b2fd43 ("Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept") fixed the same "a remote DISC clears the session while deferred setup is still flagged" problem in rfcomm_dlc_accept(); this is the remaining instance of it, in the getsockopt path. Deferred setup only leaves a socket usable here once it has reached BT_CONNECT2, so restrict the exception to that state and check that a session is actually present before following it. | ||||
| CVE-2026-98454 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix create context out-of-bounds reads smb2_parse_contexts() validates the complete create-context area but does not limit each record to its Next field before dispatching it. A malformed chain can therefore expose bytes beyond the current context to a handler. The QFid handler also used a full response-structure cast although it only reads DiskFileId. The SMB2/SMB3 lease parsers made the same layout assumption: they read LeaseState and LeaseFlags at canonical offsets rather than at DataOffset. A valid non-canonical DataOffset could therefore yield unrelated in-bounds data, while a short DataLength was still accepted. Limit each context to its Next value, reject offsets before the context header, and reject malformed chains. Bound the name range by the current context and do not dispatch a known handler when DataLength is zero. Read the QFid DiskFileId only when the context data covers that field. Parse the lease context from DataOffset and require DataLength to match the v1 or v2 lease_context size used by ksmbd. A size mismatch skips lease parsing without failing the open. | ||||
| CVE-2026-98453 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: close handle after create-context parsing failure SMB2_open() accounts a successful CREATE response as a remote open before parsing its create contexts. If smb2_parse_contexts() rejects malformed context data, SMB2_open() returns without closing the handle, leaving the server-side handle open and num_remote_opens elevated. Close the handle after a post-CREATE context parsing failure so the error path releases the remote resource and balances the open count. | ||||