Export limit exceeded: 397405 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 397405 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (397405 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-88370 | 2026-09-24 | N/A | ||
| libconfini 1.16.4 contains a heap out-of-bounds write condition involving the bundled load_ini_buffer.h utility and strip_ini_cache(). The bundled utility allocates exactly ini_length bytes, while strip_ini_cache() unconditionally writes a NUL terminator at ini_source[ini_length], requiring an additional writable byte. Applications using the bundled allocation pattern can trigger deterministic heap memory corruption when processing any non-empty INI input, resulting in denial of service. | ||||
| CVE-2026-75907 | 2026-09-24 | N/A | ||
| The door access control on a Norwegian Cruise Line asset grants entry based only on the credential's static 7-byte UID stored on an NTAG212 NFC chip. A UID is a manufacturer serial number sent in the clear on every read and is not intended to be secret or to authenticate the holder. Validating on the UID of the NTAG212 NFC chip alone is identification, not authentication, and the credential has no challenge-response capability that would resist copying. | ||||
| CVE-2023-0433 | 4 Apple, Fedoraproject, Neovim and 1 more | 4 Macos, Fedora, Neovim and 1 more | 2026-09-24 | 7.8 High |
| Heap-based Buffer Overflow in GitHub repository vim/vim prior to 9.0.1225. | ||||
| CVE-2022-3256 | 4 Debian, Fedoraproject, Neovim and 1 more | 4 Debian Linux, Fedora, Neovim and 1 more | 2026-09-24 | 7.8 High |
| Use After Free in GitHub repository vim/vim prior to 9.0.0530. | ||||
| CVE-2022-3134 | 3 Debian, Neovim, Vim | 3 Debian Linux, Neovim, Vim | 2026-09-24 | 7.8 High |
| Use After Free in GitHub repository vim/vim prior to 9.0.0389. | ||||
| CVE-2022-3037 | 3 Fedoraproject, Neovim, Vim | 3 Fedora, Neovim, Vim | 2026-09-24 | 7.8 High |
| Use After Free in GitHub repository vim/vim prior to 9.0.0322. | ||||
| CVE-2026-93283 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix device_register() error path When device_register() fails in i3c_master_register_new_i3c_devs(), put_device() is called to drop the reference taken by device_register(). That drops the last reference, so the device's release callback i3c_device_release() runs and frees the i3c_device. Two problems follow from that: i3c_device_release() does WARN_ON(i3cdev->desc), so it warns because desc->dev->desc still points back at the descriptor. Clear it before calling put_device(). After put_device() frees the i3c_device, desc->dev is left pointing at freed memory, so clear desc->dev as well. That prevents, for example, i3c_master_unregister_i3c_devs() seeing desc->dev as non-NULL and dereferencing it. | ||||
| CVE-2026-93282 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix maximum allowed access checks The DACL permission check looks for an ACE matching the current user and falls back to the Everyone ACE. It does not consider an Authenticated Users ACE, even though an authenticated session is a member of that well-known group. As a result, opening a file whose access is granted through S-1-5-11 can incorrectly fail with STATUS_ACCESS_DENIED. Treat an Authenticated Users ACE as a fallback entry alongside Everyone. The maximal access calculation also combines access masks from every ACE, regardless of whether its SID applies to the current user. This can grant rights belonging to an unrelated principal. Process only ACEs applying to the user, Everyone, or Authenticated Users, and accumulate allowed and denied masks in ACL order. Preserve explicitly requested access bits so they are validated against the resulting maximal mask. When ACCESS_SYSTEM_SECURITY is denied, report STATUS_PRIVILEGE_NOT_HELD instead of the generic STATUS_ACCESS_DENIED. Access to the system ACL requires a security privilege that ksmbd does not grant. For regular files, include FILE_EXECUTE in maximal access when the client requested GENERIC_EXECUTE and the DACL grants the complete file-read set. Keep a direct FILE_EXECUTE request subject to the explicit DACL bit. This matches the POSIX file ACL mapping without broadening specific execute requests. Do not replace rights from an applicable NT ACE with a POSIX ACL entry. The POSIX ACL is only a fallback when no user, Everyone, or Authenticated Users ACE applies; otherwise it can incorrectly broaden the stored DACL. This fixes smb2.maximum_allowed.maximum_allowed. | ||||
| CVE-2026-93281 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix HE extended capability length check rtw89_mac_check_he_obss_narrow_bw_ru_iter() reads extended capability byte 10, but rejects only datalen values below 10. Byte 10 requires at least 11 bytes. Require datalen >= 11 before reading data[10]. | ||||
| CVE-2026-93280 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: greybus: audio: bound the topology section sizes against the fetched size gb_audio_gb_get_topology() fetches a topology blob of a module-supplied size, and gbaudio_tplg_parse_data() then walks it by adding the module-supplied size_dais, size_controls and size_widgets fields to form the control, widget and route section offsets. Those le32 sizes are never checked against the fetched blob, so a module reporting a small topology size but large section sizes makes the offsets point past the allocation, and parsing reads out of bounds. Reject a topology whose section sizes do not fit within the fetched size before it is parsed. | ||||
| CVE-2026-93279 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown The TX cleanup tasklet can be scheduled by the watchdog IRQ handler to execute cvm_oct_tx_do_cleanup. There can be a pending tasklet in the queue which might run after the cvm_oct_remove() frees net_device structures, causing a use-after-free in cvm_oct_tx_do_cleanup() as it iterates cvm_oct_device[] which is an array of netdevice pointers. Add tasklet_kill() after free_irq() to ensure the tasklet is no longer scheduled or running before teardown proceeds. | ||||
| CVE-2026-93278 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: octeon: add missing napi_disable in cvm_oct_rx_shutdown cvm_oct_rx_shutdown calls free_irq and netif_napi_del without disabling the napi instance first. As the free_irq only waits for completion of hard interrupt handlers, the napi poll function could still be active. If cvm_oct_remove proceeds to free the plat structure (which holds the NAPI instances), the active poll function will access freed memory, resulting in a use-after-free crash. | ||||
| CVE-2026-93277 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Validate udata before executing commands The destroy callbacks currently zero the udata output after tearing down driver resources. If the userspace access fails, uverbs preserves the uobject and allows the destroy callback to run again, even though the driver resource has already been freed. Call ib_no_udata_io() before teardown so udata failures are detected while the resource is still intact, then return success after teardown completes. As part of this change, move ib_respond_empty_udata() to the start of the create and modify flows. While this is not strictly required for general create flows, as the core layer unwinds uobjects on failure, it is necessary for create AH. In _rdma_create_ah(), the HW object is otherwise leaked. | ||||
| CVE-2026-93276 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: renesas: phy-rcar-gen3-usb2: Fix devm action registration for disabled VBUS regulator devm_regulator_get_exclusive() initialises the regulator with enable_count = 1, requiring the consumer to disable it before release. The devm disable action was previously only registered when the caller explicitly requested enable, so when the regulator was left in its initial enabled state without an explicit enable call, the cleanup path skipped decrementing enable_count, triggering a WARN_ON during regulator release on device removal. Fix this by always registering the devm disable action based on the actual enabled state via regulator_is_enabled(), regardless of whether the caller requested an explicit enable. This covers both the explicitly enabled case and the initial state set by devm_regulator_get_exclusive(). | ||||
| CVE-2026-93275 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/pt: Fix stop/start with no update If pt_event_stop() is called without PERF_EF_UPDATE flag, then perf_aux_output_end() is not called. A subsequent call to pt_event_start() will call perf_aux_output_begin() again which violates the rule against nesting and triggers a WARNING in perf_aux_output_begin(). Originally, pt_event_stop() was never called without PERF_EF_UPDATE, because the only code paths to do so are from event overflow, and Intel PT does not do that. However the introduction of group throttling by commit 9734e25fbf5ae ("perf: Fix the throttle logic for a group") meant that an Intel PT event could be throttled if it was part of a group. Throttling calls PMU ->stop() / ->start() callbacks without flags. An example is when AUX area sampling is used. The following commands hit the issue: echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate perf record -F32000 --aux-sample -e '{intel_pt//u,cycles:u}' \ -- bash -c 'for i in `seq 1 100000` ; do true ; done' Use PERF_HES_UPTODATE to track whether perf_aux_output_begin() and perf_aux_output_end() are balanced. A cleared PERF_HES_UPTODATE bit indicates that an AUX output context is still open. Amend pt_event_start() / pt_event_stop() accordingly so that begin/end stay balanced: - In non-snapshot mode, stop() always closes the buffer (the buffer may have run out of space, and that accounting is done by the update), so a following start() opens a fresh one as before. - In snapshot/overwrite mode, stop() without PERF_EF_UPDATE leaves the buffer open so that pt_event_snapshot_aux() can still copy from it, and start() then only re-enables tracing instead of calling perf_aux_output_begin() again. Note that pt_event_del() calls pt_event_stop() with PERF_EF_UPDATE flag set (as is required by the documentation), so a final call to perf_aux_output_end() is assured. | ||||
| CVE-2026-93274 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: bcm2835: Don't remove an unregistered GPIO chip If the devm_pinctrl_register() function fails, bcm2835_pinctrl_probe() calls gpiochip_remove() before gpiochip_add_data() has registered the GPIO chip. This means that upon failure the gpio_chip.gpiodev is NULL resulting in a null pointer dereference inside the gpiochip_remove() function. Remove the unnecessary function call to gpiochip_remove(). No GPIO cleanup is required because the GPIO chip has not yet been registered. Without this change there is potential for a kernel panic upon registration failure | ||||
| CVE-2026-93273 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: regulator: tps6594: Fix device node reference leaks in multiphase loop In tps6594_regulator_probe(), the multi-phase configuration loop calls of_find_node_by_name() to find buck nodes by name, and of_get_parent() twice to navigate to the PMIC parent node. None of the acquired node references (np, intermediate parent, np_pmic_parent) are ever released via of_node_put(), causing a reference leak on every loop iteration. Additionally, of_find_node_by_name() can return NULL, but the result was immediately passed to of_node_full_name() and of_get_parent() without a NULL check, which could lead to a NULL pointer dereference. Fix this by: - Adding a NULL check for np after of_find_node_by_name() - Storing the intermediate parent node in a local variable np_parent - Calling of_node_put() on np, np_parent and np_pmic_parent at the end of each loop iteration | ||||
| CVE-2026-93272 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3 The changes introduced to handle single power domain platforms have swapped the info pointer increment from num_pd_vregs to num_pds, which would shift the info pointer past the end of the array for pronto-v3, which does not list power domain regulators in vregs. This showed up as a difference between GCC- and LLVM-compiled kernels on SDM632 devices, where only with LLVM one would get the "regulator request with no identifier" error, because the out-of-bounds memory ended up being zeroed. Fix by skipping the increment when there are more power domains than regulators. | ||||
| CVE-2026-93271 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cap out-of-range rx MCS instead of leaving bogus rate ath11k can receive HT/VHT/HE frames whose reported MCS is above the maximum that can be expressed in the corresponding mac80211 rate space (e.g. an HE frame reported with MCS 12, while HE tops out at MCS 11). The frame itself is valid and decodes correctly, but for such a frame ath11k_dp_rx_h_rate() leaves rx_status->rate_idx set to the out-of-range value and never assigns rx_status->encoding, so it stays RX_ENC_LEGACY from the ath11k_dp_rx_h_ppdu() initialization. Once that frame reaches mac80211 it trips the rate sanity check and the frame is dropped with a splat: ath11k_pci 0000:03:00.0: Received with invalid mcs in HE mode 12 WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:5433 ieee80211_rx_list+0xb0a/0xe90 [mac80211] Dropping the frame would discard otherwise valid data, so instead cap the reported MCS to the maximum the rate space can express and deliver the frame. Set rx_status->encoding before the range check and assign rate_idx from the capped value, so a frame with an out-of-range MCS no longer leaves partial or bogus rate metadata behind. Also downgrade the logging level since they are not treated as invalid frames now. The only loss is that such a frame is reported as the capped MCS in the rx rate statistics. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 | ||||
| CVE-2026-93270 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow interpreter fallback for BPF_ADDR_PERCPU insn The BPF_MOV64_PERCPU_REG insn requires JIT to emit native code to for 'dst_reg = src_reg + <percpu_base_off>'. However, the interpreter ignores the 'off' at its ALU64_MOV_X label. The 'off' indicates the insn is BPF_MOV64_PERCPU_REG insn. Then, when the interpreter loads memory from the register, it will hit a page fault. [ 2.545572] BUG: unable to handle page fault for address: ffffffffacaaf034 [ 2.546485] #PF: supervisor read access in kernel mode [ 2.547167] #PF: error_code(0x0000) - not-present page [ 2.547850] PGD 134e63067 P4D 134e63067 PUD 134e64063 PMD 10021c063 PTE 800ffffeca550062 [ 2.548912] Oops: Oops: 0000 [#1] SMP PTI Set jit_required as true in order to disallow interpreter fallback in core.c::__bpf_prog_select_runtime(), if any BPF_ADDR_PERCPU insn is patched to the prog. BTW, rename the helper bpf_map_supports_cpu_flags() to bpf_map_is_percpu_map(). | ||||