Export limit exceeded: 423976 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 423976 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (423976 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72371 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix the volume AFS_VOLUME_RM_TREE is set on Fix afs_insert_volume_into_cell() to set AFS_VOLUME_RM_TREE on the volume replaced, not the new volume, as it's now removed from the cell's volume tree. This will cause the old volume to be removed from the tree twice and the new volume never to be removed. | ||||
| CVE-2026-72360 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays Currently defined VF/PF relay actions use regular REQUEST messages only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT messages as this would result in breaking the VFPF ABI protocol and also might trigger an assert on the PF side. (cherry picked from commit 1714d360fc5ae2e0886a69e979095d9c7ff3568a) | ||||
| CVE-2026-72351 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: gue: validate REMCSUM private option length GUE private flags can indicate that remote checksum offload metadata is present. The private flags field itself is accounted for by guehdr_flags_len(), but guehdr_priv_flags_len() currently returns 0 even when GUE_PFLAG_REMCSUM is set. This lets a packet with only the private flags field pass validate_gue_flags(), after which gue_remcsum() and gue_gro_remcsum() read the missing REMCSUM start/offset fields from the following bytes. Account for GUE_PLEN_REMCSUM when GUE_PFLAG_REMCSUM is present so that malformed packets are rejected during option validation. | ||||
| CVE-2026-72350 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_u32: reject invalid shift counts u32_match_it() executes rule-supplied shift operands on a 32-bit value. A malformed u32 rule can provide a shift count of 32 or more, triggering an undefined shift out-of-bounds during packet evaluation. Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in u32_mt_checkentry() and reject malformed rules before they reach the packet path. | ||||
| CVE-2026-72348 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop The ah, hbh and rt matches check that the fixed extension header is present, then use the header length field to derive the advertised extension header length for matching. For the ah match, add the missing advertised-length check. For hbh and rt, update the existing advertised-length checks. In all three cases, set hotdrop to true before returning false when the advertised extension header length exceeds the available skb data. Returning false treats the packet as a rule mismatch. Set hotdrop to true and drop malformed packets so they cannot bypass rules intended to drop packets with these IPv6 extension headers. | ||||
| CVE-2026-72347 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_connmark: reject invalid shift parameters Revision 2 of the CONNMARK target accepts user-controlled shift parameters and applies them to 32-bit mark values in connmark_tg_shift(). A shift_bits value of 32 or more triggers an undefined-shift bug when the rule is evaluated. Invalid shift_dir values are also accepted and silently fall back to the left-shift path. Reject invalid revision-2 shift parameters in connmark_tg_check() so malformed rules fail at installation time, before they can reach the packet path. | ||||
| CVE-2026-108129 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-16 | 6.5 Medium |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. | ||||
| CVE-2026-72345 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, Fix off-by-one in single-FDB error rollback On failure at index i, the reverse cleanup loop in mlx5_lag_create_single_fdb() starts from i, so the failed index itself is rolled back. That can operate on uninitialized state or double-tear-down a rule the add_one path already self-rolled-back. Start the rollback from i - 1 so only successfully-installed entries are undone. | ||||
| CVE-2026-72343 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix HV VHCA stats zero-sized buffer allocation mlx5e_hv_vhca_stats_create() is called from mlx5e_nic_enable(), before mlx5e_open(). At that point priv->stats_nch is still zero, because it is only ever incremented in mlx5e_channel_stats_alloc(), which is reached only from mlx5e_open_channel(). mlx5e_hv_vhca_stats_buf_size() therefore returns 0, and kvzalloc(0, GFP_KERNEL) returns ZERO_SIZE_PTR ((void *)16) rather than NULL. The "if (!buf)" guard does not catch this, and mlx5e_hv_vhca_stats_create() completes "successfully" with priv->stats_agent.buf set to ZERO_SIZE_PTR. Once channels are opened (priv->stats_nch > 0) and the hypervisor enables stats reporting, mlx5e_hv_vhca_stats_work() recomputes buf_len using the new non-zero stats_nch and calls memset(buf, 0, buf_len) on ZERO_SIZE_PTR, faulting at address 0x10. Allocate the buffer based on priv->max_nch, which is set in mlx5e_priv_init() and is the upper bound on stats_nch: - Add a separate helper mlx5e_hv_vhca_stats_buf_max_size() that returns sizeof(per_ring_stats) * max(max_nch, stats_nch), and use it for the kvzalloc() in mlx5e_hv_vhca_stats_create(). - Keep mlx5e_hv_vhca_stats_buf_size() (which returns based on stats_nch) for the worker's active payload size, so the wire format (block->rings = stats_nch) and the amount of data filled by mlx5e_hv_vhca_fill_stats() are unchanged. The max(max_nch, stats_nch) guard handles the rare case where mlx5e_attach_netdev() recomputes max_nch downward across a detach/resume cycle while priv->stats_nch persists (mlx5e_detach_netdev does not call mlx5e_priv_cleanup, so stats_nch is only reset when the netdev is destroyed). Without the guard, the worker could compute buf_len from stats_nch and overrun the smaller buffer allocated based on the reduced max_nch. Allocating a non-zero buffer also makes the kvzalloc() failure path in mlx5e_hv_vhca_stats_create() reachable for the first time: it returns early without (re)creating the agent. Clear priv->stats_agent.{agent,buf} in mlx5e_hv_vhca_stats_destroy() after freeing them, so that if a later create() bails out on this path, a subsequent teardown does not double-free the stale agent/buffer left from a previous enable/disable cycle. This mirrors the existing mlx5e pattern of preallocating arrays of size max_nch (e.g. priv->channel_stats) and lazily populating entries up to stats_nch on demand. | ||||
| CVE-2026-72342 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix HV VHCA stats agent registration race mlx5e_hv_vhca_stats_create() registers the stats agent through mlx5_hv_vhca_agent_create(). The helper publishes the agent in hv_vhca->agents[type] under agents_lock and immediately schedules an asynchronous control invalidation on the HV VHCA workqueue before returning to mlx5e. The asynchronous invalidation invokes the control agent's invalidate callback, which reads the hypervisor control block and forwards the command to mlx5e_hv_vhca_stats_control(). That callback may either: - call cancel_delayed_work_sync(&priv->stats_agent.work), or - call queue_delayed_work(priv->wq, &sagent->work, sagent->delay). However, the delayed_work and priv->stats_agent.agent are only initialized after mlx5_hv_vhca_agent_create() returns to mlx5e: agent = mlx5_hv_vhca_agent_create(...); /* publish + invalidate */ ... priv->stats_agent.agent = agent; /* too late */ INIT_DELAYED_WORK(&priv->stats_agent.work, ...); /* too late */ If the asynchronous control path runs before the two assignments above, it can: - Operate on an uninitialized delayed_work whose timer.function is NULL. queue_delayed_work() calls add_timer() unconditionally, so when the timer expires the timer softirq invokes a NULL function pointer. - Re-initialize the timer later through INIT_DELAYED_WORK() while the timer is already enqueued in the timer wheel, corrupting the hlist (entry.pprev cleared while the previous bucket node still points at this entry). - When the worker eventually runs, mlx5e_hv_vhca_stats_work() reads sagent->agent (NULL) and dereferences it inside mlx5_hv_vhca_agent_write(). Fix this by: - Initializing priv->stats_agent.work before invoking mlx5_hv_vhca_agent_create(), so the work is always in a valid state when the control callback observes it. - Adding a struct mlx5_hv_vhca_agent **ctx_update out-parameter to mlx5_hv_vhca_agent_create(). The helper writes the agent pointer to *ctx_update before publishing into hv_vhca->agents[] and triggering the agents_update flow, so any callback subsequently invoked from that flow already sees a valid priv->stats_agent.agent. This avoids having the control callback participate in agent initialization. While at it, access priv->stats_agent.agent with READ_ONCE()/WRITE_ONCE() for the cross-CPU access with the worker, and clear priv->stats_agent.buf on the agent_create() failure path. | ||||
| CVE-2026-72339 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: qede: fix off-by-one in BD ring consumption on build_skb failure qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a NULL return from qede_build_skb(). When it returns NULL under memory pressure, the functions still consume a BD from the ring before returning NULL. The callers then recycle additional BDs, resulting in one extra BD being consumed (off-by-one). This desynchronizes the BD ring, which can corrupt DMA page reference counts and lead to SLUB freelist corruption. Commit 4e910dbe3650 ("qede: confirm skb is allocated before using") added a NULL check inside qede_build_skb() to prevent a NULL pointer dereference, but did not address the missing NULL checks in the callers, making this off-by-one reachable. Fix this by adding NULL checks for the return value of qede_build_skb() in both qede_rx_build_skb() and qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring manipulation. | ||||
| CVE-2026-72335 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix adv monitor add failure cleanup hci_add_adv_monitor() publishes a new adv_monitor in hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT offload add path can then fail either locally before the controller add command completes, or in the MSFT add callback. In the current queued management add flow, hci_cmd_sync_work() still invokes mgmt_add_adv_patterns_monitor_complete() with the original pending command after msft_add_monitor_pattern() returns. The buggy scenario involves two paths, with each column showing the order within that path: MSFT add handling MGMT completion 1. insert monitor and handle 1. receive sync error 2. send MSFT add command 2. call add-monitor completion 3. callback sees bad response 3. load cmd->user_data 4. callback frees monitor 4. read monitor->handle Local MSFT setup failures have the other half of the same ownership bug: they return an error after the IDR insertion, but no later code removes the failed monitor from the IDR. Keep ownership with the pending management command until its completion. For normal management adds, the MSFT add callback now records successful controller state and returns errors to its caller. The management completion frees the monitor on non-success after copying the response handle, while resume/reregister callback-error cleanup remains in the MSFT callback. The success path keeps the existing bookkeeping. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x19f/0x330 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] kasan_report+0xe0/0x110 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? 0xffffffffc00d00da ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? hci_cmd_sync_work+0x1ab/0x210 [bluetooth] hci_cmd_sync_work+0x1c0/0x210 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] process_one_work+0x4fd/0xbc0 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 471 on cpu 3 at 285.205389s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] __sys_sendto+0x2bc/0x2d0 __x64_sys_sendto+0x76/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 454 on cpu 2 at 285.217112s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 msft_add_monitor_sync+0x54a/0x570 [bluetooth] hci_add_adv_monitor+0x133/0x180 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-72334 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix malformed ISO_END/CONT handling Core specification (Part C vol 4 sec 5.4.5) does not exclude empty ISO_CONT, ISO_END packets. We currently reject them if they are last. If controller sends malformed sequence ISO_START -> rx_len = 4, ISO_CONT skb->len 4, ISO_START that ends payload in ISO_CONT, we leak conn->rx_skb. If controller sends too long ISO_END, we panic on skb_put. If controller sends too short ISO_END we accept it. Fix by marking unfinished ISO_START via conn->rx_skb != NULL. Check skb->len properly before skb_put. Combine the ISO_CONT/END code paths as they require the same initial checks. Reject too short ISO_END packets. | ||||
| CVE-2026-72330 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/tls: Consume empty data records in tls_sw_read_sock() A peer may send a zero-length TLS application_data record; TLS 1.3 explicitly permits these as a traffic-analysis countermeasure (RFC 8446, Section 5.1). After decryption such a record has full_len == 0. tls_sw_read_sock() hands it to the read_actor, which has no payload to consume and returns zero. The loop treats a zero return as backpressure (used <= 0), requeues the skb at the head of rx_list, and stops. rx_list is serviced head-first on the next call, so the empty record is dequeued, fails the same way, and is requeued again; every later record on the connection is blocked behind it. tls_sw_recvmsg() does not stall on this: a zero-length data record copies nothing and falls through to consume_skb(). Mirror that in the read_sock() path by recognizing an empty data record before the actor runs, consuming it, and continuing. | ||||
| CVE-2026-72323 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: Fix potential UAF in igmp_gq_start_timer() A race condition exists between device teardown (inetdev_destroy) and incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free in the IGMP timer callback. During device destruction, inetdev_destroy() drops the primary reference to in_device, which can drop its refcount to 0. The actual freeing of in_device memory is deferred via RCU (using call_rcu()). Concurrently, igmp_rcv() runs under RCU read lock and obtains the in_device pointer. Because the memory is RCU-protected, CPU-0 can safely dereference in_device even if its refcount has hit 0. However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it attempts to acquire a reference using in_dev_hold(). This increments the refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning. Since the in_device memory is still scheduled to be freed after the RCU grace period (as the free callback does not check the refcount again), the device is freed while the timer is still armed. When the timer expires, it accesses the freed memory, causing a kernel panic. Fix this by using refcount_inc_not_zero() (via a new helper in_dev_hold_safe()) to prevent acquiring a reference if the device is already being destroyed. If the refcount is 0, we do not arm the timer. A similar issue in IPv6 MLD is fixed in a subsequent patch. | ||||
| CVE-2026-72322 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: Fix potential UAF in MLD delayed work A race condition exists between device teardown and incoming MLD query processing, leading to a Use-After-Free in the MLD delayed work. During device destruction, the primary reference to inet6_dev is dropped, which can drop its refcount to 0. The actual freeing of inet6_dev memory is deferred via RCU. Concurrently, the packet receive path runs under RCU read lock and obtains the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can safely dereference inet6_dev even if its refcount has hit 0. However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it attempts to acquire a reference using in6_dev_hold(). This increments the refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning. Since the inet6_dev memory is still scheduled to be freed after the RCU grace period, the device is freed while the work is still scheduled. When the work runs, it accesses the freed memory, causing a kernel panic. Fix this by using refcount_inc_not_zero() (via a new helper in6_dev_hold_safe()) to prevent acquiring a reference if the device is already being destroyed. If the refcount is 0, we do not schedule the work. | ||||
| CVE-2026-72319 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: ensure inner headers in ICMP errors are in headroom Sashiko points out that after stripping the outer headers with pskb_pull() we should ensure the inner IP headers in ICMP errors from tunnels are present in the skb headroom for functions like ipv4_update_pmtu(), icmp_send() and IP_VS_DBG(). Also, add more checks for the length of the inner headers. | ||||
| CVE-2026-72318 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: cifs: validate DFS referral string offsets parse_dfs_referrals() validates that the response header and referral array fit in the received buffer, but each referral also contains string offsets supplied by the server. Those offsets are used to compute the DfsPath and NetworkAddress string pointers without checking whether they still point inside the response buffer. A malformed referral can therefore make the computed pointer exceed the end of the buffer. The resulting negative max_len is then passed to cifs_strndup_from_utf16(), and the non-Unicode path forwards it to kstrndup() as a size_t, allowing strnlen() to read out of bounds. Validate each string offset before deriving the string pointer. | ||||
| CVE-2026-72317 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: pin upper rpc_clnt across the TLS connect_worker The TLS connect path has a use-after-free: nothing pins the upper rpc_clnt across the delayed connect_worker. xs_connect() stores task->tk_client in sock_xprt::clnt as a raw pointer and queues the worker; for TLS-secured transports that worker is xs_tcp_tls_setup_socket(), which reads several fields out of the saved pointer (cl_timeout, cl_program, cl_prog, cl_vers, cl_cred, cl_stats) to construct the args for the inner handshake rpc_clnt. The xprt does not reference the rpc_clnt; the rpc_clnt references the xprt. xs_destroy() does cancel the connect_worker, but it runs only when the xprt's refcount drops to zero, which cannot happen until the rpc_clnt releases its cl_xprt reference in rpc_free_client_work(). When a TLS handshake fails fatally (for example, an mTLS mount whose client cert does not match the server), the connecting task is woken with -EACCES and exits, the mount caller invokes rpc_shutdown_client(), and the upper rpc_clnt is freed before the queued connect_worker fires. xs_tcp_tls_setup_socket() then dereferences the freed clnt, producing the refcount_t underflow Michael Nemanov reported. Take a reference on the upper rpc_clnt in xs_connect() for TLS transports via a new rpc_hold_client() helper, and drop it in the connect_worker's exit path with rpc_release_client(). The xprt_lock_connect() / xprt_unlock_connect() pairing already serialises xs_connect() with xs_tcp_tls_setup_socket(), so the take and release are balanced one-for-one. The non-TLS connect worker (xs_tcp_setup_socket) never reads sock_xprt::clnt, so leave that path alone and avoid the clnt-holds-xprt-holds-clnt cycle that would otherwise prevent xprt destruction. | ||||
| CVE-2026-72314 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK Compare against -EDEADLK, which is what ww_mutex_lock() actually returns and what every other deadlock check in this file already uses. Function regulator_lock_two() acquires two regulators via regulator_lock_nested() -> ww_mutex_lock(). On contention, ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop the lock it holds and retry the acquisition in the canonical order. However, regulator_lock_two() tests the return value against -EDEADLOCK rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are the same value, so the comparison happens to be correct and the bug is invisible. But on MIPS, SPARC, and PowerPC, those two errors have different values. The test is wrong: a genuine -EDEADLK backoff no longer matches -EDEADLOCK, so instead of unlocking and retrying, the code falls into WARN_ON(ret) and returns with only one of the two regulators locked. In practice, this is a bug only on MIPS, because the regulator core is not built or used on the other two platforms. In general, EDEADLK is preferred over EDEADLOCK for new code. | ||||