Export limit exceeded: 395640 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 395640 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395640 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93201 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate seg_id fields from persistent memory cache_pos_decode(), cache_key_decode() and the last-kset branches of cache_replay(), the writeback worker and the GC worker take a cache segment id from the cache device metadata and index cache->segments[] with it without checking it against cache->n_segs. That metadata is only CRC-protected with a fixed public seed, so whoever supplies the cache device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range value forms a wild pcache_cache_segment pointer that is dereferenced and written through -- an out-of-bounds read and write driven by on-disk data. Add cache_seg_id_valid() and reject an out-of-range id at each decode site, failing the operation with -EIO instead of indexing past the array. Bound the id against the initialized-segment count (cache_info.n_segs) rather than the physical device total. A forged cache_info.n_segs below seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed structs whose data pointer is NULL, so a forged id in that window would still be dereferenced. A later patch guarantees cache_info.n_segs <= seg_num, and a driver-created cache sets the two equal, so valid images are unaffected. | ||||
| CVE-2026-77239 | 1 Arnasdon | 1 Wacrm | 2026-09-19 | 8.1 High |
| WACRM is a self-hostable CRM template for WhatsApp. In version 0.7.0 and earlier, WACRM flow and automation write routes authenticate account viewers but do not enforce the agent role before using a service-role database client that bypasses row-level security. In src/app/api/flows/[id]/route.ts, src/app/api/flows/[id]/activate/route.ts, and src/app/api/flows/route.ts, a viewer can create, edit, activate, or delete flows because membership-only checks are followed by service-role writes. In src/app/api/automations/route.ts and src/app/api/automations/engine/route.ts, a viewer can create active automations and trigger outbound WhatsApp actions without the role required by the underlying write policies. This can permit unauthorized workflow changes, destructive flow deletion, and outbound actions from a role intended to be read-only. This vulnerability is fixed with commit 03e851bea56dcf6bb21ff1b80ba531372bf3269f. | ||||
| CVE-2026-84434 | 2 Gravityforms, Wordpress | 2 Gravity Forms, Wordpress | 2026-09-19 | 9.8 Critical |
| The Gravity Forms plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 3.1.0.4 via the upload_file function. This is due to a mismatch between the field validation pipeline and the file persistence pipeline, where hidden file upload fields bypass extension validation and a rejected file's intact upload state is later passed to upload_file() without re-validation. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. Exploitation requires the targeted form to contain a File Upload field with its Visibility set to 'Hidden'; the vulnerability is reachable by unauthenticated attackers on any publicly accessible form meeting this condition. | ||||
| CVE-2026-89334 | 2 Wordplus, Wordpress | 2 Better Messages – Chat Rooms, Group Chat, Private Messages & Ai Chat Bots, Wordpress | 2026-09-19 | 6.5 Medium |
| The Better Messages – Chat Rooms, Group Chat, Private Messages & AI Chat Bots plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.15.33. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with custom-level access and above, to access the full message transcript, thread metadata, and user data of any chat-room thread without authentication. This is only exploitable when the chat room's only_joined_can_read setting retains its default value of '0'. | ||||
| CVE-2026-89274 | 2 Brechtvds, Wordpress | 2 Wp Recipe Maker, Wordpress | 2026-09-19 | 9.1 Critical |
| The WP Recipe Maker plugin for WordPress is vulnerable to Arbitrary Shortcode Execution in all versions up to, and including, 10.8.1. The vulnerability exists because `WPRM_Metadata::sanitize_metadata()` recursively calls `do_shortcode()` on every scalar field of the recipe's structured metadata array — including the `reviewBody` field, which is populated verbatim from the `comment_content` of approved `wprm-comment-rating` comments — without sanitizing or stripping shortcode tokens before execution; the subsequent `wp_strip_all_tags()` and `strip_shortcodes()` calls operate only on the output string after execution has already fully occurred, providing no protection against server-side shortcode invocation. This makes it possible for unauthenticated attackers to execute arbitrary registered WordPress shortcodes server-side on every recipe page render, causing shortcode output — such as attachment captions, private post fields, or other data exposed by installed shortcodes — to be embedded in the page's JSON-LD `reviewBody` metadata and disclosed to all visitors who load the recipe page. Successful exploitation requires the attacker's rated comment to pass the site's comment approval threshold, either via auto-approval or moderator action, before the injected shortcode begins executing on page loads. | ||||
| CVE-2026-86591 | 2026-09-19 | 9.8 Critical | ||
| The Botiga Pro WordPress plugin before 1.6.5 does not perform any authorisation checks on one of its REST routes, allowing unauthenticated users to update arbitrary WordPress options with arbitrary values, which could lead to privilege escalation and a full site takeover. The same route also allows unauthenticated users to store arbitrary web scripts which are then executed on every page of the site's front end, as well as to move arbitrary posts to the trash. | ||||
| CVE-2026-94000 | 1 Redhat | 2 Build Keycloak, Red Hat Single Sign On | 2026-09-19 | 6.6 Medium |
| A flaw was found in the Admin REST API of Keycloak, an open-source identity and access management solution. The issue occurs in the group-membership endpoints where the system fails to check if a group grants administrative privileges before allowing a user to be added. This allows a delegated administrator with limited permissions to add themselves to a high-privilege group, potentially gaining full control over the entire realm. | ||||
| CVE-2026-94001 | 1 Redhat | 2 Build Keycloak, Red Hat Single Sign On | 2026-09-19 | 6.5 Medium |
| A flaw was found in the Admin REST API of Keycloak, an open-source identity and access management solution. The endpoint used for deleting user credentials does not correctly check for fine-grained reset-password permissions. This allows a delegated administrator, who should be restricted from resetting passwords, to delete a user's password credentials, resulting in the user being unable to log in. | ||||
| CVE-2026-93956 | 1 Olivier-ls | 1 Php-fts | 2026-09-19 | 3.5 Low |
| A flaw has been found in olivier-ls PHP-FTS up to 1.1.2. Affected by this issue is the function SearchEngine::buildHighlights of the file src/SearchEngine.php of the component Search Engine. Executing a manipulation of the argument Query can lead to cross site scripting. The attack may be launched remotely. The exploit has been published and may be used. Upgrading to version 1.1.3 can resolve this issue. This patch is called 0b2fae333d6b022da7ed4c43e2d41aa03f91dff3. The affected component should be upgraded. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. | ||||
| CVE-2026-93122 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uac: validate rate list length before storing UAC1 and UAC2 configfs rate-list attributes parse a comma-separated list of sampling rates and store each parsed value in fixed-size arrays. The arrays have UAC_MAX_RATES entries, but the store paths do not check that the input contains at most that many tokens before writing through opts->name##s[i++]. Writing more than ten rates therefore writes past the end of the p_srates[] or c_srates[] array in struct f_uac1_opts or struct f_uac2_opts. With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the UAC1 p_srate attribute reports: UBSAN: array-index-out-of-bounds drivers/usb/gadget/function/f_uac1.c:1669:1 index 10 is out of range for type 'int [10]' __ubsan_handle_out_of_bounds.cold f_uac1_opts_p_srate_store configfs_write_iter vfs_write ksys_write do_syscall_64 The same reproducer against the UAC2 p_srate attribute reports: UBSAN: array-index-out-of-bounds drivers/usb/gadget/function/f_uac2.c:2087:1 index 10 is out of range for type 'int [10]' __ubsan_handle_out_of_bounds.cold f_uac2_opts_p_srate_store configfs_write_iter vfs_write ksys_write do_syscall_64 Reject additional tokens once UAC_MAX_RATES entries have been parsed. Also keep the original kstrdup() pointer for kfree(), because strsep() advances the parsing cursor. Freeing the advanced cursor leaks the original buffer on successful parses and can free an interior pointer on some error paths. | ||||
| CVE-2026-93125 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max check_kfunc_args() detects a kfunc argument named rdonly_buf_size or rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64, and does not bound it. check_kfunc_call() later copies that value into the returned register's mem_size field: meta->r0_size = reg->var_off.value; ... regs[BPF_REG_0].mem_size = meta.r0_size; regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set gets truncated instead of causing a load-time rejection, so the verifier records a PTR_TO_MEM register with an approximately 4 GiB mem_size for whatever allocation the kfunc returned. A later access check against that register uses the truncated, wrong bound. Reject rdonly_buf_size/rdwr_buf_size values that exceed U32_MAX at the point meta->r0_size is set. | ||||
| CVE-2026-68493 | 1 Nextcloud | 1 Server | 2026-09-19 | N/A |
| After guessing a 62^15 complex unique identifier, a malicious logged in user was able to retrieve a list of memberships for a circle they are not a member of. | ||||
| CVE-2026-76554 | 2026-09-19 | 7.2 High | ||
| The WP Import Export Lite WordPress plugin before 3.9.35 does not verify that the user running an import is permitted to create or modify user accounts and assign roles, allowing users granted a delegated WP Import Export Lite WordPress plugin before 3.9.35 permission, who cannot otherwise manage users, to create administrator accounts and to overwrite the credentials and role of existing accounts, including administrators. | ||||
| CVE-2026-85658 | 2 Properfraction, Wordpress | 2 Paid Membership Plugin, Ecommerce, User Registration Form, Login Form, User Profile & Restrict Content – Profilepress, Wordpress | 2026-09-19 | 8.1 High |
| The Paid Membership Plugin, Ecommerce, User Registration Form, Login Form, User Profile & Restrict Content – ProfilePress plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 4.17.2 This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for authenticated attackers, with subscriber-level access and above, to execute arbitrary shortcodes. | ||||
| CVE-2026-93993 | 2026-09-19 | 8.8 High | ||
| Mistral Vibe before 2.25.5 contains a remote code execution vulnerability in the worktree creation process that executes git hooks before trust validation. Attackers can supply a repository with a crafted post-checkout hook that executes arbitrary shell commands with the privileges of the user running Vibe. | ||||
| CVE-2026-93992 | 2026-09-19 | 8.1 High | ||
| Gopeed through 2.0.0-beta.3 contains a path traversal vulnerability in archive extraction that allows attackers to write arbitrary files outside the extraction directory. Attackers can craft malicious archives with entries containing directory traversal sequences that bypass validation, enabling file write operations when users download and extract archives with AutoExtract enabled. | ||||
| CVE-2026-93990 | 1 Libexpat Project | 1 Libexpat | 2026-09-19 | 7.5 High |
| Expat through 2.8.4 fails to validate low surrogates following high surrogates in UTF-16 input, allowing malformed UTF-16 sequences to be accepted. Attackers can craft UTF-16 encoded XML with lone high surrogates that consume following code units, hiding markup characters from the parser and enabling XML injection attacks. | ||||
| CVE-2026-93989 | 1 Vllm | 1 Vllm | 2026-09-19 | 3.1 Low |
| vLLM through 0.29.0 fails to properly validate bad_words token indices against the model's generation output width in SamplingParams.update_from_tokenizer(). Attackers can supply out-of-bounds token indices that corrupt logits memory of concurrent requests, causing different in-flight HTTP requests to return incorrect tokens. | ||||
| CVE-2026-93988 | 1 Webkul | 1 Qloapps | 2026-09-19 | 6.5 Medium |
| QloApps through 1.7.0 contains a path traversal vulnerability in the getEmailHTML action of admin/ajax.php that allows authenticated back-office users to read arbitrary files. Attackers can supply relative path sequences in the email parameter to bypass directory restrictions and access sensitive files including database credentials and configuration data. | ||||
| CVE-2026-92507 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_dealloc_pd_user() When accessing a PD via the netlink path the only synchronization mechanism for the said PD is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_dealloc_pd_user(), which is too late, since by that point vendor-specific resources associated with the PD might already be freed. This can leave a short window where the PD remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_dealloc_pd_user(), ensuring that the PD is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a PD that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable. | ||||