Export limit exceeded: 42551 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (42551 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-2035366 | 2026-08-25 | 7.1 High | ||
| A flaw was found in OpenStack Keystone where an application credential token can escape its intended project scope through token-method reauthentication. Keystone rejects an explicit scope change for an application credential token, but an omitted scope falls through to the owner's default project. If the owner has roles on that default project, Keystone issues a new token scoped there while still carrying the original application credential identity. Custom Keystone authentication plugins are subject to the same incomplete rescope guard. This allows a limited-scope application credential for one project to access another project within the owner's role assignments. | ||||
| CVE-2026-74688 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: clear control chunk transport if it is being removed sctp_make_heartbeat_ack() caches the destination transport in chunk->transport without taking a reference. When src_out_of_asoc_ok is enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead of being transmitted immediately. If the peer transport is removed while the chunk is still queued, sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing, but only clears cached transport pointers in out_chunk_list. The queued control chunk therefore retains a dangling transport pointer. Once an ASCONF_ACK clears the suppression and the queued control chunk is transmitted, SCTP dereferences the stale transport pointer, leading to a use-after-free. Fix this by also clearing chunk->transport for queued control chunks in control_chunk_list when removing the transport. | ||||
| CVE-2026-74705 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: udp: fix potential use-after-free in tunnel segmentation __skb_udp_tunnel_segment() gets the UDP header before ensuring the tunnel header is in the skb head. If the pull reallocates skb->head, the saved UDP header pointer is no longer valid. Get the UDP header after the pull to avoid a potential use-after-free. | ||||
| CVE-2026-74604 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "thermal/drivers/hwmon: Cleanup coding style a bit" Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style a bit") that introduced a use-after-free into the error path of thermal_add_hwmon_sysfs() by removing a valid check from it. | ||||
| CVE-2026-74609 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: read le->link under the node lock in tipc_node_link_down() tipc_node_link_down() caches the link pointer before taking n->lock: struct tipc_link *l = le->link; /* unlocked */ if (!l) return; tipc_node_write_lock(n); if (!tipc_link_is_establishing(l)) { /* deref l */ ... tipc_link_reset(l); /* write into l */ if (delete) { kfree(l); le->link = NULL; The delete=true caller frees that very object under n->lock, so the lock does not protect the cached pointer against it: - CPU A, delete=false: tipc_rcv() on TIPC_LINK_DOWN_EVT, or the link supervision timer via tipc_node_timeout(), reads l unlocked and then dereferences it under n->lock; - CPU B, delete=true: netlink TIPC_NL_BEARER_DISABLE -> bearer_disable() -> tipc_node_delete_links() -> tipc_node_link_down(n, bearer_id, true) -> kfree(l). The link is freed with plain kfree(), not kfree_rcu(), and for UDP bearers disable_media() only schedules the asynchronous cleanup_bearer() work, so its synchronize_net() runs after the links are already gone. An in-flight CPU A that has read l therefore dereferences freed memory once B frees it: a use-after-free read in tipc_link_is_establishing(), and a use-after-free write via tipc_link_reset() on the establishing branch. The following trace was captured on 7.2.0-rc5-00284-gaf39eb111ce6: BUG: KASAN: slab-use-after-free in tipc_link_is_establishing (net/tipc/link.c:285) Read of size 4 at addr ffff88802e2aa068 by task swapper/2/0 tipc_link_is_establishing (net/tipc/link.c:285) tipc_node_link_down (net/tipc/node.c:1076) tipc_node_timeout (net/tipc/node.c:843) Allocated by task 9549: tipc_link_create (net/tipc/link.c:490) tipc_node_check_dest (net/tipc/node.c:1279) tipc_disc_rcv (net/tipc/discover.c:252) tipc_udp_recv (net/tipc/udp_media.c:389) Freed by task 9549: tipc_node_link_down (net/tipc/node.c:1084) tipc_node_delete_links (net/tipc/node.c:1320) bearer_disable (net/tipc/bearer.c:414) __tipc_nl_bearer_disable (net/tipc/bearer.c:992) Move the le->link read inside tipc_node_write_lock(), so it is serialised against the kfree() in the delete path. A racing teardown now either has not run yet, and we see a valid link, or has already run, and we see NULL. | ||||
| CVE-2026-74614 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: read virtqueues under worker locks Commit bd50c5dc182b ("vsock/virtio: add support for device suspend/resume") made the *_run flags transition from false to true when restore installs replacement virtqueues. The RX, TX and event workers read their virtqueue before locking and checking the corresponding flag, so a worker delayed across freeze and restore can observe the replacement queue's running state while retaining a pointer to the deleted queue. Read each virtqueue under its mutex after checking the run flag, keeping the pointer and state in the same queue generation. | ||||
| CVE-2026-74642 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb: Fix UAF at delayed release of MIDI2 EPs The recent fix for UAF in ump_to_endpoint() caused another UAF because it tries to dereference the UMP endpoint object, but this might be executed at a delayed context where the endpoint has been already released. Add private_free to clear the associated data for avoiding the further dereference for delayed releases. | ||||
| CVE-2026-79672 | 1 Ech0 | 1 Ech0 | 2026-08-25 | 5.5 Medium |
| Ech0 before 4.4.3 fails to enforce scope-based authorization on nine comment panel admin endpoints, allowing access tokens with minimal scopes to perform full comment moderation operations. Attackers with a limited-scope access token can list, approve, reject, delete comments, and modify comment system settings by directly accessing the unprotected panel endpoints. | ||||
| CVE-2026-77128 | 2026-08-25 | N/A | ||
| The extension fails to enforce enable-field restrictions on a repository query parameter. An unauthenticated remote user can pass a demand-override parameter to view hidden or time-restricted events, unless the disableOverrideDemand plugin setting is active. Exploitation of this issue requires only that disableOverrideDemand is not enabled. | ||||
| CVE-2026-76574 | 1 Code-projects | 1 Hospital Information System | 2026-08-25 | 7.3 High |
| A flaw has been found in code-projects Hospital Information System 1.0. The impacted element is the function User::login of the file includes/users/UsersController.php of the component User Login Handler. This manipulation of the argument email causes sql injection. The attack is possible to be carried out remotely. The exploit has been published and may be used. | ||||
| CVE-2026-68561 | 1 Wekan | 1 Wekan | 2026-08-25 | 8.8 High |
| Wekan is open source kanban built with Meteor. Prior to 9.89, the second Boards.allow({ update }) rule in server/permissions/boards.js called canUpdateBoardSort in server/lib/utils.js, which authorized any board member whenever fieldNames included sort. Because Meteor combines allow rules with OR semantics and applies the complete modifier, a comment-only or read-only member could send one Boards.update with $set values for sort, members, permission, and title, make themselves the sole board administrator, expose a private board, and evict the legitimate owner; the last-admin deny rule inspected only $pull and did not block a wholesale $set of members. Version 9.89 requires sort to be the only modified field and rejects $set member arrays that remove the last active administrator. This issue is fixed in version 9.89. | ||||
| CVE-2026-55373 | 2026-08-25 | 6.2 Medium | ||
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions prior to 3.2.10, 3.3.12, and 3.4.13 contain an infinite-loop vulnerability in SampleCountChannel. The helper roundListSizeUp() rounds a sample-list size up to the next power of two using repeated unsigned left shifts, which terminates for normal values but fails for UINT_MAX: the sequence reaches 0x80000000, and the next left shift wraps the 32-bit value to 0. Because 0 remains less than UINT_MAX, the loop never progresses and never exits. The bug is reachable through public OpenEXRUtil APIs, either by editing the sample-count buffer through SampleCountChannel::Edit (whose destructor calls endEdit()) or by calling SampleCountChannel::set(x, y, UINT_MAX) on a valid pixel. This issue has been fixed in versions 3.2.10, 3.3.12, and 3.4.13. | ||||
| CVE-2026-74587 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix use-after-free of cached ASCONF chunk addip_last_asconf caches the outstanding outbound ASCONF chunk. The normal ASCONF-ACK completion path releases the chunk and clears the pointer. However, sctp_asconf_queue_teardown() releases the cached chunk without clearing addip_last_asconf. During peer restart handling, sctp_sf_do_dupcook_a() queues SCTP_CMD_PURGE_ASCONF_QUEUE, which invokes sctp_asconf_queue_teardown() while the association remains alive and leaves the pointer dangling. A delayed authenticated ASCONF-ACK can then reach sctp_sf_do_asconf_ack(), which accesses the stale chunk and passes it to sctp_process_asconf_ack(), causing a use-after-free and a second release. Clearing the pointer exposes a race with T4 expiry. Peer restart handling queues the timer stop before the purge, but SCTP_CMD_TIMER_STOP uses timer_delete(), which does not wait for a callback already running on another CPU. Such a callback can reach sctp_sf_t4_timer_expire() after the purge and dereference NULL. Clear addip_last_asconf after releasing the cached chunk, and make sctp_sf_t4_timer_expire() consume a stale T4 expiry if no outstanding ASCONF remains. | ||||
| CVE-2026-74589 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix sk_redir use-after-free in send verdict sk_psock_msg_verdict() takes a socket reference for psock->sk_redir. tcp_bpf_send_verdict() copies that pointer while holding the source socket lock, but does not take a reference for the local copy before dropping the lock around tcp_bpf_sendmsg_redir(). When apply_bytes keeps the cached verdict active, another sendmsg() on the same source socket can consume the remaining bytes and release the cached reference while the first thread still holds only the raw local pointer: CPU 0 CPU 1 sk_redir = psock->sk_redir apply_bytes remains nonzero release_sock(sk) lock_sock(sk) apply_bytes reaches zero psock->sk_redir = NULL release_sock(sk) tcp_bpf_sendmsg_redir(sk_redir) sock_put(sk_redir) tcp_bpf_sendmsg_redir(sk_redir) The final sock_put() can free sk_redir before CPU 0 dereferences it. KASAN reported: BUG: KASAN: slab-use-after-free in tcp_bpf_sendmsg_redir+0xf39/0x1020 Read of size 8 at addr ffff888108537090 by task poc/87 Call Trace: tcp_bpf_sendmsg_redir+0xf39/0x1020 tcp_bpf_sendmsg+0x977/0x1a50 __sys_sendto+0x32c/0x3a0 __x64_sys_sendto+0xdb/0x1b0 Allocated by task 85: sk_prot_alloc+0x56/0x210 sk_clone+0x6f/0x14b0 inet_csk_clone_lock+0x24/0x740 tcp_create_openreq_child+0x25/0x2710 tcp_v4_syn_recv_sock+0x10a/0xe00 Freed by task 0: __kasan_slab_free+0x43/0x70 slab_free_after_rcu_debug+0xa6/0x1e0 rcu_core+0x50a/0x1850 Last potentially related work creation: __sk_destruct+0x3da/0x540 sk_psock_destroy+0x81e/0xab0 process_one_work+0x63a/0x1070 Take a temporary socket reference while the source socket lock still protects psock->sk_redir, and drop it after tcp_bpf_sendmsg_redir() returns. This keeps each unlocked use independent of cached-verdict ownership. | ||||
| CVE-2026-19656 | 1 Scada-lts | 1 Scada-lts | 2026-08-25 | 9.9 Critical |
| ScadaLTS 2.7.8.1 exposes a server-side method that lacks authorization checks, allowing any authenticated user (including one holding only low-privilege, read-only permissions) to execute arbitrary operating system commands on the host. Successful exploitation results in code execution in the context of the ScadaLTS server process (root), leading to full compromise of the underlying system. | ||||
| CVE-2026-74613 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: avoid refilling the RX queue after teardown Commit b917507e5ad9 ("vsock/virtio: stop workers during the .remove()") made the RX worker jump to its common exit when rx_run is clear. That exit still refills the RX queue when the buffer count is low, so work queued across virtio_vsock_vqs_del() can add buffers after the virtqueues have been deleted. BUG: KASAN: slab-use-after-free in virtqueue_add_sgs Read of size 4 by task kworker/0:1 Workqueue: virtio_vsock virtio_transport_rx_work Call Trace: virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2796) virtio_vsock_rx_fill (net/vmw_vsock/virtio_transport.c:332) virtio_transport_rx_work (net/vmw_vsock/virtio_transport.c:701) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... Freed by task 141: kfree (mm/slub.c:6566) vp_del_vq (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtio_vsock_freeze (net/vmw_vsock/virtio_transport.c:912) virtio_device_freeze (drivers/virtio/virtio.c:658) virtio_pci_freeze (drivers/virtio/virtio_pci_common.c:601) pci_pm_freeze (drivers/pci/pci-driver.c:1098) device_suspend (drivers/base/power/main.c:1968) Kernel panic - not syncing: KASAN: panic_on_warn set ... Jump to a no-refill exit when rx_run is clear, leaving the normal exit to replenish a running queue. | ||||
| CVE-2026-79669 | 2 Ech0, Lin-snow | 2 Ech0, Ech0 | 2026-08-25 | 4.3 Medium |
| Ech0 before 4.4.3 lacks authorization checks on system log endpoints allowing any authenticated non-admin user to read and stream all server logs. Attackers can access historical logs and real-time log streams via GET /api/system/logs, GET /api/system/logs/stream, and WS /ws/system/logs to gather reconnaissance data including internal file paths, error stack traces, and application state. | ||||
| CVE-2026-78864 | 1 Liketrek | 1 Trek | 2026-08-25 | 6.3 Medium |
| A vulnerability was determined in liketrek TREK up to 3.0.22. The affected element is the function journeyService.updateEntry of the file server/src/nest/journey/journey.controller.t of the component Journey Entry Update. This manipulation causes sql injection. It is possible to initiate the attack remotely. Upgrading to version 3.1.0 is sufficient to fix this issue. It is recommended to upgrade the affected component. | ||||
| CVE-2026-78656 | 1 Itsourcecode | 1 Sales And Inventory System | 2026-08-25 | 6.3 Medium |
| A vulnerability was found in itsourcecode Sales and Inventory System 1.0. Affected is an unknown function of the file /pages/cust_del.php. The manipulation of the argument ID results in sql injection. The attack can be executed remotely. The exploit has been made public and could be used. | ||||
| CVE-2026-17063 | 1 Ibm | 39 Power System E1050 \(9043-mrx\), Power System E1050 \(9043-mrx\) Firmware, Power System E1080 \(9080-hex\) and 36 more | 2026-08-25 | 7.9 High |
| IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 is affected by a vulnerability in the interface between the BMC/FSP and the host system. An attacker with service account or root access to the BMC/FSP can access and disrupt host processor state, potentially affecting the managed system and all hosted partitions, resulting in an confidentiality, and availability impact. | ||||