Export limit exceeded: 399728 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (399728 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97944 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/cfi: Fix FineIBT hash offset in cfi_get_func_hash() The switch of the FineIBT preamble from "subl $hash, %r10d" to the shorter "subl $hash, %eax" moved the hash immediate from offset 7 to offset 5 of the preamble. fineibt_preamble_hash was updated to match, but the open-coded offset in cfi_get_func_hash() was missed and it still reads the hash at offset 7. cfi_get_func_hash() is used by the BPF JIT to give a struct_ops trampoline the CFI hash of the stub function it stands in for. With FineIBT the trampoline now gets the upper half of the real hash followed by the first two bytes of the next instruction, so the first indirect call from the kernel into a struct_ops program, tcp_init_congestion_control() calling ->init() of a BPF congestion control for example, fails the FineIBT check and the kernel dies with a CFI failure. Move the FineIBT preamble template and its offset defines above cfi_get_func_hash() and use fineibt_preamble_hash there, so every reader of the preamble shares one definition of its layout. The CFI_FINEIBT arm is only built with CONFIG_FINEIBT, the only configuration in which cfi_mode can take that value. cfi_get_func_arity() does not need the same treatment: the __bhi_args call whose displacement it reads still ends at the function address. | ||||
| CVE-2026-97900 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/drm_exec: fix up contended obj when num_objects is 0 drm_exec_prepare_array() silently returns success without calling drm_exec_lock_contended() when num_objects is zero. This breaks the invariant upheld by drm_exec_lock_obj(), where every entry point into the locking sequence must first attempt to lock any previously contended object before proceeding. Drivers that chain multiple drm_exec_prepare_array() calls per drm_exec_until_all_locked() iteration (e.g. amdgpu's userq signal/wait ioctls, which prepare separate read and write BO arrays) can pass an empty array for one of the two calls. If contention is hit while preparing the non-empty array, exec->contended is set and the loop retries; on retry, the empty-array call preceding it is a no-op that never clears exec->contended, so drm_exec_retry_on_contention() immediately jumps back to the top of the loop without ever reaching the call that would resolve the contention. This spins forever. Fix it by having drm_exec_prepare_array() call drm_exec_lock_contended() directly when num_objects is zero, so a pending contended object dont loop infinitely. | ||||
| CVE-2026-97903 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exit: hold a reference to thread_pid across proc_flush_pid Commit 0a36bad01731 ("release_task: kill the no longer needed get/put_pid(thread_pid)") removed the reference around proc_flush_pid(). It assumed that free_pids(post.pids) at the end of release_task() would keep thread_pid alive until then. That assumption is wrong. __change_pid() only records a detached PID in post.pids when pid_has_task() is false for every PIDTYPE. If another task still uses the exiting task's PID as its process group or session ID, __unhash_process() removes the exiting task's PIDTYPE_PID link but leaves the PID out of post.pids. release_task() therefore holds no reference to it after dropping tasklist_lock. The other task can then remove the remaining PIDTYPE links. Its free_pids() call schedules delayed_put_pid(), and the RCU callback can free the PID before the first release_task() reaches proc_flush_pid(). An unprivileged reproducer races wait4(-1) against setsid() to trigger this ordering. Three of three fresh v7.2 KASAN boots reported: BUG: KASAN: slab-use-after-free in proc_invalidate_siblings_dcache+0x3e2/0x3f0 Read of size 8 by task h7_pid_reaper/1921 Call Trace: proc_invalidate_siblings_dcache release_task wait_consider_task __do_wait do_wait kernel_wait4 Freed by task 0: kmem_cache_free put_pid delayed_put_pid rcu_core Last potentially related work creation: __call_rcu_common free_pids ksys_setsid KASAN identified a 144-byte object from the pid cache and located the bad read 80 bytes into the freed object, matching pid->inodes. With an explicit reference, three of three fresh boots completed without a KASAN report. The concurrent RCU callback dropped its reference while proc_flush_pid() was protected, and the balancing put_pid() performed the final free afterward. Take a reference before __unhash_process() clears p->thread_pid and release it after proc_flush_pid() completes. A tested source reproducer is available privately on request. No controlled read or write, information leak, or privilege escalation is claimed. The mainline patch applies directly to v6.19.y and newer; v6.16.y through v6.18.y need a context-adjusted backport. | ||||
| CVE-2026-97908 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev The command and ACL RPMsg endpoints store struct btqcomsmd as their callback private data. The receive callbacks dereference btq->hdev without taking an hci_dev reference. The current teardown order frees the hci_dev before destroying the RPMsg endpoints in both the hci_register_dev() error path and the driver remove path. If WCNSS delivers data in that window, the endpoint callback can run with an already freed hci_dev and pass it to the Bluetooth core. For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears the callback under the channel recv_lock. The receive path holds the same lock while invoking the callback, so destroying the endpoints first both prevents new callbacks and serializes with any callback already running. Destroy the command and ACL endpoints before hci_free_dev(). Keep hci_unregister_dev() first during remove so the HCI core stops issuing operations before the transport endpoints are shut down. In the full registration-error cleanup path, return directly after freeing the hci_dev to avoid falling through to the partial-construction labels and destroying the endpoints twice. | ||||
| CVE-2026-97910 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sprd: validate compress buffer sizes against fixed allocations sprd_platform_compr_open() allocates the stage 0 IRAM buffer (32K data area) and the stage 1 DDR buffer (2M data area) with fixed sizes, but sprd_platform_compr_copy() derives all copy lengths from the user controlled runtime->fragment_size and the write() count, never comparing them against the physical buffer sizes. The compress core only checks fragment_size * fragments for an u32 overflow in snd_compress_check_input(), so a local user can configure a logical buffer of up to ~4GB via SNDRV_COMPRESS_SET_PARAMS, far exceeding the fixed allocations. A fragment_size larger than the 32K IRAM data area makes the stage 0 copy_from_user() overflow past the IRAM allocation, and a buffer_size larger than the 2M DDR buffer makes the wrapping copy at the end of sprd_platform_compr_copy() write fully user controlled data past the buffer. No SNDRV_PCM_TRIGGER_START is needed, a write() in SETUP state reaches the copy callback directly. Reject parameters that do not fit into the fixed buffers in set_params(), and fix the advertised max fragment size: 128K never fitted into the 32K IRAM buffer. The caps values may have been carried over from the qdsp6 driver, which allocates its buffers according to the advertised maxima, unlike this driver. With 32K as max fragment size the advertised limits are self-consistent: 32K * 64 = 2M equals the DDR buffer size. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-97913 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure cmd stream ends with a stop op While the QSIZE register setting should prevent an out of bounds access of the command stream, it is not clear whether the h/w generates an interrupt in this case as is required (to prevent a timeout). As a stop op is expected end of the command stream, let's just ensure it is present. A stop op in the middle of the command stream also makes no sense. | ||||
| CVE-2026-97917 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr Add a size parameter to ivpu_to_cpu_addr() and validate that the whole [vpu_addr, vpu_addr + size) range stays within the BO. | ||||
| CVE-2026-97928 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip the VMID 0 flush for VRAM Clear-on-release only runs on VRAM, which amdgpu_ttm_map_buffer() reaches via its direct MC address without programming a GART window, yet the wipe still forces a VMID 0 flush. On GFX11 (e.g. Navi33) that spurious SDMA flush can wedge the engine; only flush when a GART window is actually used. v2: Let amdgpu_ttm_map_buffer() return whether the VMID 0 flush is needed, and drive the clear and copy paths from that. (Christian) v3: Make the vm_needs_flush output parameter mandatory instead of allowing NULL. (Christian) (cherry picked from commit a306e406e570b74318ff7d80e5b07b540ca1d3a9) | ||||
| CVE-2026-97945 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix user-space data loss with MADV_FREE and THP Some of users of Polars (a data analytics library) have lost production data from this bug. They seem to have just the right combination of huge pages, MADV_FREE and heavy reclaim pressure. pmd_modify() masks the old value with (_HPAGE_CHG_MASK & ~_PAGE_DIRTY), silently discarding the hardware dirty bit. The subsequent pmd_mksaveddirty() call is supposed to transfer _PAGE_DIRTY into _PAGE_SAVED_DIRTY when write-protecting, but the dirty bit was already stripped from the value, so there is nothing left to transfer. Contrast with pte_modify(), which keeps _PAGE_DIRTY_BITS in its mask, and pud_modify(), which keeps _HPAGE_CHG_MASK untouched: pmd_modify() is the odd one out. Any pmd_modify() on a writable, dirty PMD loses the dirty state. One visible consequence is data loss with MADV_FREE on PMD-mapped THP: memset(buf, 0x5A, size); // PMD-mapped THP, PMD dirty madvise(buf, size, MADV_FREE); // PMD cleaned but left writable, // folio marked lazyfree memset(buf, 0x5A, size); // hardware sets _PAGE_DIRTY again mprotect(buf, size, PROT_READ); // pmd_modify() drops the dirty bit mprotect(buf, size, PROT_READ|PROT_WRITE); // ... memory pressure ... Reclaim (e.g. under memcg pressure) then finds the lazyfree folio with no dirty bit set anywhere and frees it in __discard_anon_folio_pmd_locked(), even though the data was rewritten after MADV_FREE; subsequent reads fault in fresh zero pages. NUMA hinting alone can trigger the same loss, as do_huge_pmd_numa_page() restores the PMD through pmd_modify() as well. PMD-mapped file THPs are affected too: mprotect()/NUMA hinting dropping the dirty bit means rewritten data is never written back. Fix it by keeping _PAGE_DIRTY in the preserved mask, exactly like pte_modify() and pud_modify() do. The existing pmd_mksaveddirty()/pmd_clear_saveddirty() pair then performs the hardware-dirty <-> saved-dirty transition based on the write bit, preserving the shadow-stack encoding rules. | ||||
| CVE-2026-97949 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: configfs: unhash the dentry before dropping the item in rmdir configfs_get_config_item() treats a hashed dentry as proof that sd->s_element is a live config_item. configfs_rmdir() breaks that: simple_rmdir() leaves the dentry hashed, the last reference to the item is dropped right after, and the dentry is only unhashed by d_delete() once ->rmdir() has returned. configfs_symlink() resolves its target holding no lock on it, so get_target() can land in that window: BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90 get_target fs/configfs/symlink.c:128 [inline] configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185 Unhash in configfs_remove_dir(), while the item is still guaranteed to be there. A reference obtained just before that stays harmless, as create_link() rechecks CONFIGFS_USET_DROPPING, already set by configfs_detach_prep(). Both configfs_unregister_subsystem() paths d_drop() after detaching, so this only makes rmdir match them. | ||||
| CVE-2026-97950 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: configfs: pin the symlink target's dirent instead of chasing ->ci_dentry create_link() reads the target's configfs_dirent from item->ci_dentry->d_fsdata, relying on the item reference taken by get_target(). That reference pins the item, not its dentry: the dentry is pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via simple_rmdir() while the item is still alive. A symlink racing with rmdir of its target can therefore find ->ci_dentry freed and its dirent released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get(). Take the dirent in get_target() as well, under ->d_lock and atomically with the item reference, and pass it down to create_link(). A hashed dentry has not been killed yet, so its ->d_fsdata reference keeps the dirent alive there. | ||||
| CVE-2026-97952 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sunvdc: unmap LDC cookies when the descriptor send fails __send_request() maps the request's pages into the LDC channel's map table (ldc_map_sg()), fills in the descriptor and marks it VIO_DESC_READY before ringing the doorbell via __vdc_tx_trigger(). When the trigger fails, the error path only prints a message: the descriptor stays READY and the cookies are never unmapped. The mapping is normally released in vdc_end_one() when the peer completes the descriptor - but a descriptor whose doorbell was never sent will never complete, and since dr->prod is not advanced on failure, the reset path (vdc_requeue_inflight(), which walks [cons, prod)) never visits it either. The map table entries are leaked permanently. Since commit a11f6ca9aef9 ("sunvdc: Do not spin in an infinite loop when vio_ldc_send() returns EAGAIN") trigger failures occur in practice under load, so every resulting I/O error also leaks one request's worth of entries from the fixed-size (8192 entries per channel) map table. Because the allocator hands out contiguous ranges, fragmentation makes large multi-segment requests fail first as the table drains, until ldc_map_sg() fails permanently and the disk is dead until reboot. It also makes any retry-based recovery unusable: requeuing the request on -EAGAIN remaps the pages on every attempt, overwriting desc->cookies and orphaning the previous mapping, so the table drains at the retry rate. This is the memory exhaustion observed when the requeue approach was first tested in October 2025. Roll back on failure: unmap the cookies, mark the descriptor FREE again and clear the request entry. If the trigger failed with -ENOTCONN, __vdc_tx_trigger() has already reset the port, which tears down and reallocates both the dring and the LDC channel including its map table - nothing to roll back, and the stale descriptor must not be touched. | ||||
| CVE-2026-78510 | 1 Microsoft | 9 365 Apps, Microsoft 365, Office 2016 and 6 more | 2026-09-25 | 8.4 High |
| Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-78516 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-09-25 | 4.3 Medium |
| Insertion of sensitive information into externally-accessible file or directory in Windows Storage allows an authorized attacker to disclose information locally. | ||||
| CVE-2026-45241 | 2026-09-25 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-45240 | 2026-09-25 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-45239 | 2026-09-25 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-45238 | 2026-09-25 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-45237 | 2026-09-25 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-45236 | 2026-09-25 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||