Export limit exceeded: 42569 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (42569 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74276 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: xilinx: use FIFO occupancy register to determine buffer size The method the driver uses to determine the size of the FIFO has a problem. What it currently does is this: It stops the SPI hardware and writes to the TX FIFO register until TX FIFO FULL asserts in the status register. But the hardware does not only have the FIFO, it also has a shift register which can hold a byte. This can be seen, when writing a byte to the FIFO (while the SPI hardware is stopped,) the TX FIFO EMPTY is still empty. So, if we have a FIFO size of 16 for example, the current method returns a 17. This is a problem, at least when using the driver in irq mode. The same size determined for the TX FIFO is also assumed for the RX FIFO. When a SPI transaction wants to write the amount of the FIFO size or more bytes, the following happens, for example with 16 bytes FIFO size: The driver stops the SPI hardware and writes 17 bytes to the TX FIFO and starts the SPI hardware and goes sleep. The hardware then shifts out 17 bytes (FIFO + shift register) and simultaneously reads bytes into the RX FIFO, but it only has 16 places, so it looses one byte. Then TX FIFO empty asserts, wakes the driver again, which has a fast path and reads 16 bytes from the RX FIFO, but before reading the last 17th byte (which is lost) it does this: sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); if (!(sr & XSPI_SR_RX_EMPTY_MASK)) { xilinx_spi_rx(xspi); rx_words--; } It reads the status register and checks if the RX FIFO is not empty. But it is empty in our case. So this check spins in a while loop forever locking the driver. This patch fixes the logic to determine the FIFO size. | ||||
| CVE-2026-74284 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_hfsc: Don't make class passive twice update_vf() is called from two places for the same class during a single dequeue when the class's child qdisc (e.g. codel/fq_codel) drops its last packets while dequeuing: 1. The child calls qdisc_tree_reduce_backlog(), which, now that the child is empty, invokes hfsc_qlen_notify() -> update_vf(cl, 0, 0) and turns the class passive (cl_nactive is decremented up the hierarchy). 2. hfsc_dequeue() then calls update_vf(cl, qdisc_pkt_len(skb), cur_time) to charge the dequeued bytes. On the second call the class is already passive, but its child qdisc is still empty, so update_vf() arms go_passive again: if (cl->qdisc->q.qlen == 0 && cl->cl_flags & HFSC_FSC) go_passive = 1; The leaf is then skipped by the cl_nactive == 0 check inside the loop, which does not clear go_passive, so the stale go_passive propagates to the parent and decrements its cl_nactive a second time. A parent that still has other active children is driven to cl_nactive == 0 and removed from the vttree, even though those siblings are still backlogged. They are never dequeued again and the qdisc stalls. Fix this by only arming go_passive when the class is actually active, so an already-passive class no longer triggers a second passive transition. The byte accounting (cl->cl_total += len) still runs for every ancestor, so dequeued bytes continue to be counted exactly once. | ||||
| CVE-2026-74285 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: Stop leased rxq before uninstalling its memory provider netif_rxq_cleanup_unlease() tears down the memory provider that was installed on a physical RX queue through a netkit queue lease. It currently revokes the provider's DMA mappings before stopping the physical queue: __netif_mp_uninstall_rxq(virt_rxq, p); /* DMA unmap */ __netif_mp_close_rxq(phys_rxq->dev, rxq_idx, p); /* queue stop */ This inverts the ordering used by the regular teardown paths (normal device unregister and the io_uring zcrx close path), which stop the queue before revoking the provider's mappings. With the physical queue still live, its NAPI can keep consuming net_iov entries from the page_pool alloc cache after the __netif_mp_uninstall_rxq() has already cleared their dma_addr, opening a window for the device to DMA to a stale or zero address. Fix it by swapping the two calls so the queue is stopped (and its NAPI quiesced) before the provider is uninstalled. No functional regression was observed across repeated runs of the nk_qlease.py HW selftest, which exercises the lease teardown path; this was tested against fbnic QEMU emulation. | ||||
| CVE-2026-74302 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix UAF in hci_unregister_dev() hci_unregister_dev() does not disable cmd_timer and ncmd_timer before the hci_dev structure is freed. If a timeout fires during device teardown, the callback dereferences freed memory (including the hdev->reset function pointer), leading to a use-after-free. Add disable_delayed_work_sync() calls alongside the existing disable_work_sync() calls to ensure both timers are fully quiesced before teardown proceeds. | ||||
| CVE-2026-74307 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: validate donor file superblock early in EXT4_IOC_MOVE_EXT Reject the EXT4_IOC_MOVE_EXT ioctl early if the donor file does not belong to the same superblock as the original file. Currently, this validation is performed inside ext4_move_extents() by mext_check_validity(), but only after lock_two_nondirectories() has already acquired the inode locks. When the donor fd refers to a file on a different filesystem (e.g., overlayfs), this late validation creates a circular lock dependency: CPU0 (overlayfs write) CPU1 (ext4 ioctl) ---- ---- inode_lock(ovl_inode) mnt_want_write_file(filp) sb_start_write(ext4_sb) [sb_writers] backing_file_write_iter() vfs_iter_write(real_file) file_start_write(real_file) sb_start_write(ext4_sb) [blocked by freeze] lock_two_nondirectories() inode_lock(ovl_inode) [blocked] With a concurrent freeze operation holding sb_writers write side, this forms a deadlock cycle: CPU0 waits for freeze to complete, freeze waits for CPU1's sb_writers reader to exit, CPU1 waits for CPU0's inode lock. Since EXT4_IOC_MOVE_EXT exchanges physical extents between two files, it fundamentally requires both files to reside on the same ext4 filesystem. Moving the superblock check before any lock acquisition is both semantically correct and eliminates the circular dependency by ensuring that cross-filesystem donor fds are rejected before sb_writers or inode locks are taken. | ||||
| CVE-2026-74319 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix deadlock waiting for ticket during data relocation When performing data relocation on a zoned filesystem, BTRFS can deadlock in handle_reserve_tickets(). The relocation process is waiting on a space reservation ticket that can never be fulfilled, because the relocation itself is the operation responsible for freeing up that space. Fix this by introducing a new flush state, BTRFS_RESERVE_FLUSH_ZONED_RELOCATION, specifically for data chunk allocation during zoned relocation. Like BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE, this state uses priority_reclaim_data_space() instead of the normal flushing path, which avoids re-entering the relocation code and breaking the deadlock cycle. In btrfs_alloc_data_chunk_ondemand(), select this new flush state when the inode belongs to a data relocation root on a zoned filesystem. | ||||
| CVE-2026-74339 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Clear variable event pointer on read snd_seq_read() copies a queued variable-length event header to userspace before expanding the payload. Queued variable-length events use SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first extension cell. The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the copy, but it leaves data.ext.ptr untouched. A userspace sequencer client can therefore write a direct variable event to itself and read back the extension-cell kernel address from the returned header. Clear the temporary header pointer before copy_to_user(). The original queued event remains unchanged and is still passed to snd_seq_expand_var_event(), so payload expansion keeps using the internal chain. | ||||
| CVE-2026-74351 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: rebase copied fsdlm LVB pointers in locking_state The locking_state debugfs iterator snapshots struct ocfs2_lock_res by value under ocfs2_dlm_tracking_lock and later formats that copy in ocfs2_dlm_seq_show(). That is fine for the inline fields, but the userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still points into the original lockres owner, so teardown can free that container before the debugfs dump walks the raw LVB bytes. Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw LVB. The seq snapshot already carries the inline LVB storage reserved in struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes without borrowing the original lockres lifetime. The buggy scenario involves two paths, with each column showing the order within that path: locking_state reader: lockres teardown: 1. ocfs2_dlm_seq_start()/next() 1. file release or another owner copies struct ocfs2_lock_res teardown reaches 2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free() the copied row 2. the lockres is removed from the 3. ocfs2_dlm_lvb() follows the tracking list copied sb_lvbptr 3. the owner frees the original lockres container Validation reproduced this kernel report: KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430 RIP: 0033:0x7f8ec4b1e29d The buggy address belongs to the object at ffff88810a1e0800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 368 bytes inside of freed 1024-byte region [ffff88810a1e0800, ffff88810a1e0c00) Read of size 1 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 seq_read_iter+0x29d/0x790 seq_read+0x20a/0x280 find_held_lock+0x2b/0x80 rcu_read_unlock+0x18/0x70 full_proxy_read+0x9e/0xd0 vfs_read+0x12c/0x590 ksys_read+0xd2/0x170 do_user_addr_fault+0x65a/0x890 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 ocfs2_file_open+0x13e/0x300 do_dentry_open+0x233/0x7f0 vfs_open+0x5a/0x1b0 path_openat+0x66d/0x1540 do_file_open+0x186/0x2b0 do_sys_openat2+0xce/0x150 __x64_sys_openat+0xd0/0x140 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 ocfs2_file_release+0x138/0x260 __fput+0x1df/0x4b0 fput_close_sync+0xd2/0x170 __x64_sys_close+0x55/0x90 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-74318 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock cloning inline extent when using flushoncommit In commit b48c980b6a7e ("btrfs: fix deadlock between reflink and transaction commit when using flushoncommit") a deadlock was fixed between reflinks and transaction commits when the fs is mounted with the flushoncommit option. This happened when we had to copy an inline extent's data to the destination file. However the issue was fixed only for the case where the destination offset is 0, it missed the case when the offset is greater than zero. Fix this by ensuring we get i_size update whenever we copied an inline extent's data into the destination file. Syzbot reported this with the following trace: INFO: task kworker/u8:3:57 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:3 state:D stack:21600 pid:57 tgid:57 ppid:2 task_flags:0x4208160 flags:0x00080000 Workqueue: writeback wb_workfn (flush-btrfs-129) Call Trace: <TASK> context_switch kernel/sched/core.c:5402 [inline] __schedule+0x16f9/0x5500 kernel/sched/core.c:7204 __schedule_loop kernel/sched/core.c:7283 [inline] schedule+0x164/0x360 kernel/sched/core.c:7298 wait_extent_bit fs/btrfs/extent-io-tree.c:905 [inline] btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:2008 btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline] btrfs_invalidate_folio+0x440/0xc00 fs/btrfs/inode.c:7718 extent_writepage fs/btrfs/extent_io.c:1848 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2552 [inline] btrfs_writepages+0x12f3/0x2410 fs/btrfs/extent_io.c:2684 do_writepages+0x32e/0x550 mm/page-writeback.c:2571 __writeback_single_inode+0x133/0x10e0 fs/fs-writeback.c:1764 writeback_sb_inodes+0x97f/0x1980 fs/fs-writeback.c:2056 wb_writeback+0x445/0xb00 fs/fs-writeback.c:2241 wb_do_writeback fs/fs-writeback.c:2388 [inline] wb_workfn+0x3fd/0xf20 fs/fs-writeback.c:2428 process_one_work+0x98b/0x1630 kernel/workqueue.c:3318 process_scheduled_works kernel/workqueue.c:3401 [inline] worker_thread+0xb49/0x1140 kernel/workqueue.c:3482 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> INFO: task syz.0.145:8523 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.0.145 state:D stack:22752 pid:8523 tgid:8522 ppid:5850 task_flags:0x400140 flags:0x00080002 Call Trace: <TASK> context_switch kernel/sched/core.c:5402 [inline] __schedule+0x16f9/0x5500 kernel/sched/core.c:7204 __schedule_loop kernel/sched/core.c:7283 [inline] schedule+0x164/0x360 kernel/sched/core.c:7298 wb_wait_for_completion+0x3e8/0x790 fs/fs-writeback.c:227 __writeback_inodes_sb_nr+0x24c/0x2d0 fs/fs-writeback.c:2847 try_to_writeback_inodes_sb+0x9a/0xc0 fs/fs-writeback.c:2895 btrfs_start_delalloc_flush fs/btrfs/transaction.c:2182 [inline] btrfs_commit_transaction+0x813/0x2fc0 fs/btrfs/transaction.c:2371 btrfs_sync_file+0xdf4/0x1230 fs/btrfs/file.c:1822 generic_write_sync include/linux/fs.h:2663 [inline] btrfs_do_write_iter+0x6a9/0x840 fs/btrfs/file.c:1473 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x629/0xba0 fs/read_write.c:688 ksys_write+0x156/0x270 fs/read_write.c:740 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0x560 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5a0bdece59 RSP: 002b:00007f5a0b446028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f5a0c065fa0 RCX: 00007f5a0bdece59 RDX: 000000000000029f RSI: 0000200000 ---truncated--- | ||||
| CVE-2026-74329 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: unregister PM notifier on watchdog unregister watchdog_register_device() registers wdd->pm_nb when WDOG_NO_PING_ON_SUSPEND is set, but watchdog_unregister_device() does not remove it. This leaves an embedded notifier block on the PM notifier chain after the watchdog device has been unregistered. A later suspend/resume notification can then call watchdog_pm_notifier() with a stale watchdog_device pointer, or at minimum after wdd->wd_data has been cleared by watchdog_dev_unregister(). Unregister the PM notifier before tearing down the watchdog device. | ||||
| CVE-2026-74352 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: of: reserved_mem: avoid post-init UAF when alloc_reserved_mem_array() fails The global pointer 'reserved_mem' continues to reference the reserved_mem_array which lives in __initdata if alloc_reserved_mem_array() fails. of_reserved_mem_lookup() is exported for post-init use, that would dereference freed memory and trigger a use-after-free. So reset reserved_mem_count to 0 when alloc_reserved_mem_array() fails. | ||||
| CVE-2026-74345 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix endpoint/socket association handling Disassociating a socket from an endpoint via siw_socket_disassoc() may release the last reference on that endpoint and free it. Therefore, don't clear the endpoints socket pointer after calling that function, but within. This fixes a: BUG: KASAN: slab-use-after-free in siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1053 drivers/infiniband/sw/siw/siw_cm.c:1075) which occurred after processing a malformed MPA request during connection establishment, causing the new endpoint to be closed. | ||||
| CVE-2026-74354 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Take mmap_lock in zap_pages() zap_vma_range() requires the owning mm's mmap_lock to be held. Taking mmap_read_lock under arena->lock would AB-BA against arena_vm_close() and arena_map_mmap(), both of which run with mmap_write_lock held and then acquire arena->lock. Instead drop arena->lock, mmget_not_zero() the vma's mm, take mmap_read_lock, and re-resolve the vma via find_vma() since it may have been unmapped or replaced while waiting. Track processed vmls with a per-call generation in vml->zap_gen and serialize zap_pages() callers with a new arena->zap_mutex so concurrent callers on different uaddr ranges do not mark each other's vmls processed before the zap is done. | ||||
| CVE-2026-74359 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: configfs_lookup(): don't leave ->s_dentry dangling on failure Normally ->s_dentry is cleared when dentry it's pointing to becomes negative (on eviction, realistically). However, that only happens if dentry gets to be positive in the first place; in case of inode allocation failure dentry never becomes positive, so ->d_iput() is not called at all. We do part of what normally would've been done by configfs_d_iput() (dropping the reference to configfs_dirent) manually, but we do not clear ->s_dentry there. Sloppy as it is, it does not matter in case of configfs_create_{dir,link}() - there configfs_dirent does not survive dropping the sole reference to it. However, for configfs_lookup() it *does* survive, with a dangling pointer to soon to be freed dentry sitting it its ->s_dentry. Subsequent getdents(2) in that directory will end up dereferencing that pointer in order to pick the inode number. Use after free... This is the minimal fix; the right approach is to set the linkage between dentry and configfs_dirent only after we know that we have an inode, but that takes more surgery and the bug had been there since 2006, so... | ||||
| CVE-2026-74363 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning htab with internal structs") moved inode cleanup from ->free_inode() into ->destroy_inode() to avoid sleeping in RCU context when calling bpf_any_put(). However this removed the RCU delay on freeing the inode itself and the cached symlink body (i_link), both of which can be accessed by RCU pathwalk (pick_link, may_lookup etc.). This causes a use-after-free when a concurrent unlinkat() drops the last inode reference and destroy_inode() frees the inode immediately, while another task is still walking the path in RCU mode and reads inode->i_opflags (offset +2) inside current_time() -> is_mgtime(). KASAN reports: BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313 Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags) The rules (per Al Viro): ->destroy_inode() called immediately, can sleep, use for blocking cleanup e.g. bpf_any_put() ->free_inode() called after RCU grace period, use for freeing inode and anything RCU-accessible e.g. i_link Fix: split the two concerns properly: - keep bpf_any_put() in bpf_destroy_inode() since it is blocking and needs to run promptly - introduce bpf_free_inode() to handle kfree(i_link) and free_inode_nonrcu() with proper RCU delay, preventing the UAF | ||||
| CVE-2026-74382 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_bpf: prevent unbounded recursion in offload rollback Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd(). Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then swaps prog/oldprog and recursively calls itself to roll back. But bpf_tc_accept=0 makes the rollback fail too, which triggers yet another rollback frame with the same arguments, and so on until the stack is exhausted. bpf_tc_accept is just a convenient knob for the reproducer. Any driver whose tc_setup_cb_replace() fails twice in a row can hit the same loop, so this is not a netdevsim-only issue. Two ways to fix it: 1) Have the rollback call tc_setup_cb_add() on oldprog instead of re-entering cls_bpf_offload_cmd(). 2) Mark the rollback frame with a flag and skip a second-level rollback from inside it. Go with (2). It is the smaller change and keeps the original behaviour: the rollback still goes through tc_setup_cb_replace(), so the driver gets one real chance to restore its state. If that attempt also fails, we just return the original error instead of recursing. [1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u | ||||
| CVE-2026-74412 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix wrong pci_get_drvdata type in AER handlers rtw88 stores an ieee80211_hw pointer via pci_set_drvdata() at probe time, but io_error_detected() and io_resume() retrieve it as a net_device pointer. This causes netif_device_detach/attach to operate on an ieee80211_hw struct, reading and writing at wrong offsets. Use ieee80211_stop_queues/wake_queues instead, consistent with every other queue stop/start path in the driver. | ||||
| CVE-2026-74401 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: dlm: fix add msg handle in send_queue ordered In a benchmark scenario triggering a lot of requests that triggers a lot of DLM messages on the network it can be that the mh->seq is not ordered according the oldest seq number. This ordering is required by dlm_receive_ack as "before(mh->seq, seq)" will stop to check for older sequence numbers that are ordered in the tail of "node->send_queue". The side effects of not having it correct ordered regarding "before(mh->seq, seq)" are refcounting issues and use-after free. I only was able to reproduce this issue in a experimental DLM branch and a user space DLM benchmark that uses io_uring. After changing this I don't experienced any refcounting with the sending buffer issues anymore. | ||||
| CVE-2026-74428 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix double unlock in rxrpc_recvmsg() Fix a double unlock in rxrpc_recvmsg() when dealing with OOB messages. | ||||
| CVE-2026-74507 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: validate numbered report payloads When hidp_get_raw_report() waits for a numbered report, hidp_process_data() compares the expected report number with skb->data[0]. A connected HIDP peer can reply with only a DATA transaction header, leaving the skb empty after the header is removed. KMSAN reports an uninitialized-value use in hidp_session_run(), with the value originating in __alloc_skb() through vhci_write(). The transaction header checks remove the empty-frame reports, but this report remains until the payload check is added. The comparison can also consume a peer-controlled byte beyond the declared L2CAP PDU. A DATA | FEATURE response followed by an extra 0x01 byte made the current code accept that byte as report ID 1 and complete HIDIOCGFEATURE with a zero-byte result. With this change the malformed response is rejected with -EIO, while a subsequent valid response still succeeds. Require a payload byte before comparing a numbered report ID. Unnumbered reports continue to accept an empty payload. | ||||